Microphone not working with XFi Titanium Fatal1ty Pro

Lo all,
I bought a new PC last week: OS is Vista Ultimate 64 bit, headset is Sennheiser PC350, soundcard is as per subject line to this thread. The sound is working fine - awesome in fact. But when I went to configure Ventrilo I realised that my mic was not communicating. I tried a recording but it would appear that the mic is not currently being detected. I went into the Control Panel/Sound and can see that no mic is being detected. Assuming my headset is working fine how do I tackle this? Is this a detection issue? Is this a volume/mute?
Any and all help,
LK.

Anyone able to help?
LK.
Message Edited by Lord_Kaene on 02-02-2009 02:06 PM

Similar Messages

USB webcam microphone not working with Starcraft 2 voice chat

=USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
Any thoughts on this or am I SOL and have to find myself a shiny new headset?

I had the same problem. You need to check the device index of your USB mic.
In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
Remember, that the indexing is 0 based.
The sound framework make the assumption that the index is 0.
Hope that helps.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Shure Earphones (SE115m+) Microphone Not Working with OS X 10.6.6

Since I upgraded my MacBook Pro to OS X 10.6.6 the microphone on my Shure Earphones no longer works, or is even detected in the Sound preferences. (Worked flawlessly with OS X 10.5.x). Kind of surprising since they sell them at the Apple store specifically for their compatibility.
Shure Customer support insists it's Apple's problem:
"Sorry, we have not encountered this problem before. There is no firmware or software in the SE115m+, so the change in performance has to be on the Apple side.
Here is complete technical data on the "M+" product. Supply it to Apple and ask for their comments.
Answer Title: SE115M+ Basic Features and Operation
Answer Link: http://shure.custhelp.com/app/answers/detail/a_id/3852"
Also note that the volume control on these earphones does not work with the iPhone 3G.
Anyone know of any solutions?

Try resetting the PRAM.
Info here:
http://docs.info.apple.com/article.html?artnum=2238

Microphone not working with speakerphone

I recently purchased a iPhone 4 which is pre-owned. I soon discovered that the microphone is not working when ever I'm using speakerphone.
The microphone works fine otherwise and I can hear the call fine when in speakerphone mode. The problem is only with the microphone not working while in speakerphone mode. Based on some initial Google searches, I can see this is a relatively common issue on iPhones (4 & 4s models) but have not seen a way to resolve. Please help me resolve.

This may be relevant. I've been getting warnings "Device storage almost full" recently - even though I have an SD card that is almost empty. I suppose the device doesn't know to automatically use that for any downloaded/photos, etc.
In any case, I made some room, but is it possible that "core" stuff may have been overwritten (obviously some kind of s/w bug if so). How likely would this scenario be? I realize that anything is possible, including a meteor strike - but I was curious whether this is something that is "realitiscally" likely with the current BB OS.
Also, if I back up my data, do an OS reload, and then restore my data - is there a chance that the problem might come back? (given that the data I will back up now will have "more space" than when the warnings started coming, since I deleted some stuff).
Thanks again.

Polygonal lasso tool not working with stylus on Surface Pro 2

Hi guys,
I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
I've searched the web and come up with nothing so far so any help is greatly appreciated!
Thanks for your time
Scott

same problem on surface pro 3 !!!!
and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly

Promo printer not working with brand new macbook pro

Just got the macbook pro with promo hp 3050 j610 printer, and it says the computer is not compatible with my computer when i try to download. I went on to hp site to download drivers andit didint work.. Please help.. I want to hook it up wireless! Thank you!

http://support.apple.com/kb/DL907
The latest printer drivers from HP.

Internal microphone not working with Windows 7 Enterprise on dx6650

Hi. I recently upgraded my HP Pavilion dx6650 to Windows 7 Enterprise (final version, non beta). Everything worked fine but the internal microphone that is not working.Thank you in advance.

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Line-in not working with Xfi extreme audio pci-e

Hi,
im trying to play my xbox360 on my computer, the video with my winfast dtv000T is ok, but whenI try to get the sound by connecting the xbox360 sound in one of the two mic/line-in I get nothing (tried in K!TV, Winfast PVR, DScaler). Im running XP SP3. I can use teamspeak with the mic but I dont know why when I try to use the line in for sound capture its not working at all (its working with my onboard soundcard, but I prefer my xfi). I connect my xbox to the blue female jack 3.5.
here are my settings:
Output:
? <img alt="Output part2" height="43" width="34" src="http://img247.imageshack.us/img247/7683/output2zb0.png" title="Output part2"><img alt="output part" height="29" width="247" src="http://img20.imageshack.us/img20/404/outputpi2.png" title="output part">
Input:
<img alt="Line-in" height="434" width="562" src="http://img208.imageshack.us/img208/277/lineinwn2.png" title="Line-in">?
I dont know what to do :/
anyone have an idea what is causing this ?
thx in advance

Under applications there is this version: [url="http://forums.creative.com/t5/forums/replypage/board-id/soundblaster/message-id/#">Creative Console Launcher 2.40.09?[/url]
My line-in worked as this is the entertainment mode that?you can turn on your Line-in under the mixer tab. Problem is, when I play my guitar there is quite a latency that is unbearable (.05) for a guitarist. I don't know if this should bother your application for it.

GRID doesn't work with xfi titanium pci-express under xp sp3

With my audigy grid worked perfectly but I bought xfi titanium and i donwloaded the last stable driver but grid (+ last patch .2)?crashed at the launch of the game.
If somebody can help me?
my config:
xp sp3, last stable driver, geforce gtx280 (80.48), q6600

up! thanks

Microphone not working with Skype

Hi,
I've just got a new Intel Core Duo Mac mini and want to run the latest edition of skype. Everything works except the microphone. I tested it using Skype's echo123 which allows you to leave a message for 10 seconds and then plays back with silence. Hmmm.
I have not tried or installed any other programs and I can see in the settings that the microphone should be used. Its not my microphone because it works on my Windows laptop.
Anyone had any luck?
Intel Core Duo Mac Mini Mac OS X (10.4.5) 1.66Ghz 512Mb 80GbHD

Hello,
Macintosh computers require an "Amplified" microphone.
These are rare items in your local stores which cater to the PC majority.
An amplified Microphone will have a battery in it (like a AAA or AA battery).
PC's have a separate Microphone and Audio Input line.
Mac's just have an Audio Input line.
With an Audio Input line, you must have a "Line-Level" audio signal. This is the level of audio typically sent through a Stereo component's CD-Player or Tape Deck (such as when connecting an external CD-Player to a component stereo with RCA cables). This would be the audio level present on the RCA cables.
If you are using a Microphone which is not amplified, then you need a pre-amplifier to sit between the Microphone and your audio input line.
Given the cost and additional wiring mess of a pre-amplifier, it is generally better to just purchase an amplified microphone. They are available if you look.
I used to sell them back when I had a computer business, I think I sold them around $15 to $20 compared to $5 or $10 for an unamplified microphone.
The reason that you can use your other microphone with a PC is that the PC amplifies it's Microphone port.
If you are handy with electronics, here's a document on how to build your own pre-amp circuit:
http://www.epanorama.net/circuits/micamp.html
If you are not up to the task of building a pre-amp for your microphone, then I would either purchase an Amplified Microphone (with a battery), or buy a pre-amplifier (usually around $50 to $70 for a low-end pre-amp).
Keep in mind that not all so-called "Amplified Microphones" are really self-powered and pre-amplified. Make sure it has it's own battery if there is any chance it is going to be able to work with your Mac. It needs to amplify it's own signal prior to sending it to the Macintosh for it to work for you.
One external solution around $120 is this simple and compact pre-amp:
http://www.microphones.com/microphonegroup.cfm?URLID=Preamp-Series
I've used other solutions that were only around $60, but they take-up my whole desk. So, I guess there is a price for convenience.
A self-powered microphone would be the most elegant solution though.
Here's a cheap ($50) solution for a self-powered microphone:
http://www.jr.com/JRProductPage.process?Product=24501
There are also headphone-mounted solutions available as well.
There are also some USB solutions that people have been using for Mac's without Audio-in ports.
The USB solutions are essentially a Microphone port that plugs into your USB port. They are reportedly pretty good. But, some people have reported a delay in their recordings (particularly with music recording). So, that may or may not be an option for you.
One USB solution is:
http://www.griffintechnology.com/products/imic2/
I hope you find this information helpful.

Dv6648se microphone not working with windows 7

The hard drive died on my laptop this week so I got a new one installed, plus Windows 7. Now my microphone does not work. The mic is my lifeline to keep in touch with my family while I'm overseas. Any suggestions will be greatly appreciated. Hurry...I'm running out of wine.

this is a KNOWN problem with the HP G60 series. Yours is a different model, but from what I ma seeing in this forum - I am beginning to wonder if the sound problenms aren't more widespread.
Go look at this thread in this forum: HP G60-535DX Windows 7 Home Premium Internal Microphone Inaudible

Why are none of my midi controllers not working with my new MacBook Pro?

I am running OS X 10.7.3
None of my M-Audio midi controllers are syncing with my new MacBook Pro.
They are all class-compliant and willl work on Mac OS X without the need of a driver is what M--Audio has posted on there website for all of my controllers.
I am using the following midi controllers:
Keystation 49e
Axiom 25
Trigger Finger
I purchased my new laptop all most 2 months ago and have not been able to start making music on it since. Lots of issues transitioning to Lion. I am still using my old macbook to make music. Any suggestions?
Thanks!

I had the same problem with my apps and your solution worked perfectly! You made my day (:

5.1 not working with xfi plati

hey there well i got the xfi platinum and my 5. isnt working?Its weird the rear speakers work fine but the front ones dont (center and woofer works)?got it working before but that took (hours) of restarting replugging things in configuring etc and it's kinda ridiculous because 2 5. systems same problems (cables have been swapped)?anyone else having this issue? i plug the rear speakers (black cable) to the port for the front and that works vice versa etc but still no 5. kinda sucks...
any kind of input?

Hi Killswitch,
Did you ever solve this problem? I'm having the exact same issue. Front Left and Front Right Speakers are not working.
It seems some problem with the card because I tried switching the cables and the speakers are working.
Hope you can help!
Thanks!

Microphone not working with speaker phone

Hi Guys
My Normal Microphone is working fine on normal calls but when using speaker phone nobody can hear me. Also when using APPS like Fring or Viber
Microphone doesnt work have to use headset.
Very annoying Please help
Please Help!!!!!!
Norman

I recently bought an iphone 4s from bangkok. I am a resident of new delhi. I was sold the phone by telling that its a product of international one year warranty so need not to worry.
As i started using the phone, I have realised that the microphone of the phone doesnt work. I keep on speaking but noone can listen to me on the other side. I tried headphone and it was fine. I tried speaker phone with mic on top and it was fine.
I called apple to find out that this is a replaced handset which has been replaced by Apple.
After all the ifs and buts, It was agreed with them that it is still a product of Apple and is under one year warranty. They have agreed for replacement but only if I can take this phone to a apple store in Korea or Australia. Which is highly impossible for me.
I wonder what to do. Whether to speak with apple again to see if they can provide replacement in New Delhi itself, or ask a local technical expert to repair it for me.?
Kindly advice what should I do to get my mic working fine.
Sandeep Agarwal
[email protected]

Microphone not working with XFi Titanium Fatal1ty Pro

Similar Messages

Maybe you are looking for