Microphone on iPad 3 stopped working.reset doesn't work

HEllo,
Can anyone help me in regards to the microphone on ipad3? It was working fine yesterday but today it doesn't work. I tried resetting by holding the home and power button, restored original settings and nothing. Anyone had this problem? What do I do?

I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
 Cheers, Tom

Similar Messages

HT204390 Before the recent iOS 7 update I could get closed captioning on amazon prime movies, now it's not possible even the ones that have CC available .. I've turned in on in setting on my iPad mini but it doesn't work. Netflix is no problem.

Before the recent iOS 7 update I could get closed captioning on amazon prime movies, now it's not possible even the ones that have CC available .. I've turned it on in setting on my iPad mini but it doesn't work. Netflix is no problem.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Hi everyone, I have a computer linked to my iPAD through itunes. Then my Computer crashed and had to get a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP :(

Hi everyone, I have a computer linked to my iPAD through itunes. Then my Computer crashed and had to get a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP

what do you mean the old computers link?
my ipad is sycned with my computer but nowhere is there a link
and if I connected it with a new computer and set it to sync it would replace all my data with the data from the new computer

Why clipping path postponed from a photoshop in indesign at operation of addition of the new channel by means of work path doesn't work

why clipping path postponed from a photoshop in indesign at operation of addition of the new channel by means of work path doesn't work

Please elaborate the issue and Supply pertinent information for quicker answers:
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

To stop a thread doesn't work sometimes

in my programm i have a thread, wenn i want interrupt the running thread i wrote this code: myThread.stop(), it works indeed, but not everytime. i cannot understand why it doesn't work, can somebody tell me why and how to handle it?
I thank you in advance.

if (a_Condition_you_have_set) myThread stop();
is depricated, though it should still work and if I remember rightly it could cause the thread to keep running (or not stop properly) - so causing memory problems.
You have to use boolean values eg;-
public void start() { // the thread
conditions;
run();
public void run() {
conditions(false or true);
public void stop() {
conditions(false or true);
- its a standard method, perhaps someone could provide a link, though if you do a search for thread + whatever, you should find it easily enough.

Finally gave up and returned the iPad because WiFi "just doesn't work."

My iPad wouldn't connect to public hotspots and performed poorly even in my house where my iPhone, MacBook Pro and iMac all work just fine. After hours of monkeying with settings and renaming my network and trying other suggestions generously offered here, I just gave up and returned it.
The "specialist" at the Apple store informed me of the 10% restocking fee. I countered that I wasn't returning it because I had changed my mind, but because it doesn't work properly.
I was told that he'd have to get approval from the manager of the "Geniuses." They refunded the total amount, but if I hadn't insisted, I'd have been out fifty bucks.
Apple has long touted the "it just works" appeal of its products, but this time they've clearly dropped the ball.
I'd been considering getting for my aging parents because it seemed like a simple way to get online without overwhelming them too many choices. I've since changed my mind.

When I realized that this was a widespread problem I decided to cut my losses. This might have easily turned into a expanding waste of time.
I'll consider buying a new iPad when the kinks have been worked out. Maybe the 3G option isn't such a bad idea, I now think it could be useful in pinch.
I'm glad to have been able to consult this discussion board.

Aiport Express dead? Yellow light one, reset doesn't work...

Hello
My Airport Express stopped working a few days ago. I just shows a constant yellow light, resets (incl factory reset) don't work and I can't see it with Airport Utility.
Any ideas?
(latest firmware update)

Welcome to the discussions!
If you have tried the factory default reset several times and continue to see a constant amber light, the Express has likely experienced an internal electrical component failure and will need to be replaced.

Iphone 5 won't turn on. Reset doesn't work either.

Hi All,
My Dad's having an issue with his iPhone 5. The cellphone won't turn on. This happened after he turned it off one day.
He's tried pressing home button and power button, but that doesn't work either. He believes that the phone has too little free memory for iOS to boot.
So we are just wondering if there is a way he can backup the photos/contacts in that case?
I am just wondering if you have any insights?
Thanks,
Di

Having the phone refuse to turn on is a symptom of a completely drained battery. Connect the phone to the charger that came with it and connect that to a good wall outlet. Wait at least 30 minutes then reset the phone. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the phone restarts let it continue to charge until the battery is at 100%. If the phone does not restart Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Wrt120n resetting doesn't work

Putting this router back in service, I reset (10 and 30 sec hold) until lights flashed. Unplugged it. Came back and connected to computer. Used default u/n = blank and p/w = admin -- doesn't work, can't get to control screen. Tried various combinations and still won't work. How do I get router to respond? Tech support won't help.
Solved!
Go to Solution.

Login through FF wouldn't work do matter how my settings are. MSIE login worked first time. "To reset this, unplug the modem and plug it back in again" Did this many times. "What I usually have to do is connect a computer straight to the modem to get the modem to register its MAC address. " Did that too. "Then when that is connected to the internet, I connect up the WRT120N to the modem and clone the MAC address to match the computer MAC address." Not sure how this is done. But I never had to do this when shifting routers around lots of different installations -- more than 10, anyway. I just plugged the router into the modem, rebooted the modem, and everything worked. But that was using Netgear and other brands. This is the first Linksys I've tried, and I'm not real happy about it! Especially with the **bleep** the setup program put on my computer -- two services and four installed programs, and a desktop item that couldn't be removed. Took about 15 minutes to figure out where it put everything and another 10 to uninstall it all.

IPod touch won't turn on, charge, iTunes doesn't recognize it, and the hard reset doesn't work

My iPod touch 5th gen died so I put in it the charger. Now even the dead battery screen doesn't come on. iTunes will not recognize it, The hard reset won't work, recovery mode doesn't work. Does anyone know how to fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Airpot extreme 4th gen, internet connection works and doesn't work

I have this airport extreme 4th generation that worked just perfectly untill 2 days ago.
I have a modem from the Tel Company. From there a RJ45 cable goes into the Airposrt extreme.
The light is green.
If I open the airport utility, it tells me the internet connection works (green light) and sometimes doesn't works (orange light)
I first had problem with wifi on iPhone 4s (wife and friends), who couldn't join the wifi network anymore. They can see the wifi network, they type the password but can't login.
I had problems with my last gen MacBookPro, apparently for no reason. Sometimes it connects some other time it doesn't.
Same story with my iPhone5.
I also made an hard reset of the airport extreme but with no result. nothing changed.
Sometimes the internet connection is on some other times is off.
Now I want to understand where is the problem, can be the ISP, can be the airport that is damaged?
Thanks.

Router mode: Bridge mode
You do not have multiple public IP.. DHCP is the wrong setting..
One or the other has to be bridged.. the AE is currently the one bridged..
Or the modem has to be bridged.. pick on or the other.
Did you chack the modem logs?
What modem is it?
What do the lights on the modem show when the connection drops out?
Did you plug something directly into the modem and see if internet is still working when the AE stops working??

Admin Password not working, Resetting password not working

Out of nowhere my G4 required me to login (I never had to previously). I tried every password I have ever used and nothing worked. I took it into the Omaha genius bar, and the nice gentleman used the install disk (I think it was a 10.4 install disk) to reset my password. When we resarted we weren't required to type in the password, so he assumed it was fine.
I started my computer once at home and it was fine. When I did a restart, I was required to login. The login does not recognize the new password. I tried ressetting the password, but it doesn't seem to take. It doesn't give me a warning, but when I try to login, it doesn't work. This is super frustrating. I can't find the 10.4 install disk, so I was just using the computer's original install disk to change the admin password.
Any suggestions to actually change the password or to figure why it isn't recognizing the password?

I can't find the 10.4 install disk, so I was just using the computer's original install disk to change the admin password.
I am assuming these original disks that came with a Quicksilver may be as early as OS 10.1. I imagine password setting is a pretty fundamental process to any version of OSX but I would feel very uncomfortable about doing anything to a Tiger drive with an earlier OS version. Would be interesting to test, but not on my computer!
Here's two threads talking about resetting passwords without a boot disc:
[http://discussions.apple.com/thread.jspa?threadID=1455124&tstart=0]
[http://discussions.apple.com/thread.jspa?threadID=1458675&tstart=0]

Locked Work Status doesn't work

Hi
This is a new case.
I have original work status like this. I show MAN only in this example
Unlock    MAN=unlock
Submitted MAN=owner
Approved MAN=locked
Then I add a new work status line as the intial state
Start     MAN=locked
Unlock    MAN=unlock
Submitted MAN=owner
Approved MAN=locked
The purpose of the Start work status is to prevent the user submit something at the initial state.
But the Start work status doesn't lock anything, user is freely to submit data on this work state.
My analysis,
I changed the current work status from Start to Unlock and switch it back to Start and the lock does its job.
Anybody has the same issue?
Halomoan
Edited by: Halomoan Zhou on Aug 26, 2008 11:50 AM

It is logical that it works only after you upgrade to unlocked and downgrade again. The workstatus mechanism makes use of a table called tblFINANCElock (or what name your application has). In the beginning there are no records in this table which indicates that the data is unlocked. Once you update the status for the first time a record is generated with a status. From now on the system can link the records to the work status setting that you have defined and see that status "start" should lock the data. I think this functioality works as it is intended, and the only workaround for you is to lock and unlock the data before the users start entering data for that period.
-Joost

Save as no longer works; it doesn't work in Microsoft either. I've only been using this forever.

I'm not sure how long this has been going on, a couple of months? I was able to get download to work by setting the address to "download". The "save as" doesn't work ... it only has save and until I changed the setting, it didn't save at all. I do a lot of genealogy which entails copying and saving as.
Because it doesn't work in Microsoft, I thought they turned off something in one of their updates, but getting them to admit it .. well. I can't be the only one suffering with this problem.
I am using an Elitebook 8540p with Win 8.1. I have Office 2013.

A post was flagged as '''Solved Problem.''' Please remove that flag.
If you don’t, others that can help may not read this post.
http://kb.mozillazine.org/Unable_to_save_or_download_files

My iPad screen is black but the iPad itself still works. I reset the iPad but it still doesn't work. What can i do?

When i went onto my iPad this morning it was completely fine and working but once i took it to college with me the battery had ran out, so later on tonight i plugged my charger in and left it charging for about half an hour, when i went to go back up onto it was just a black screen and every so often when i pressed the power button it would flash blue for a split second then be blacked out again...
So i had a look on this community to see if there was any solutions that could help and i found a case similar to mine so i tried to reset in hopes that it worked but it never did. I know that the iPad itself is working as i managed to unlock my iPad when putting in my passcode and i was able to get notification through as well, but after the reset i saw the apple logo appeared and it flashed a few times and i could see the setup on the screen to set it up as a new iPad.
I don't know how or why the screen will not work properly, so any help would be great

Hello there, Courtney_May.
The following Knowledge Base article addresses intermittent display issues on iPhone, but is applicable to your iPad as well:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Microphone on iPad 3 stopped working.reset doesn't work

Similar Messages

Maybe you are looking for