Microphone port doesnt work on SBL

The microphone works, but not in the microphone port. I have to use it in the line in port. But I dont want to do this because I have another device I'd like to use that port with. Any suggestions?
Oh btw, i did turn off the onboard audio in bios.

Unmuting the port, and it doesnt work. What is strange is, though even im using the line in port, i have the microphone line unmuted. If I unmute the line in port, the mic wont work. Seems strange. No I havent had a chance to try it in another computer yet, I just bought it like three weeks ago.

Similar Messages

  • Analog microphone port not working?

    I have a Mac Mini (mid-2010), and no analog microphone will work in it.  I've looked through the forums and Googled around looking for an answer, but I can't find anything.  Is there a known bug with this port, or should I just return the thing for warranty repair?  I've had it only about six months....
    Thanks,
    Scott

    The audio-in port is expecting a "line level" signal - MUCH stronger than a microphone level signal.  One of the big differences between Macs and PCs.  You need a microphone pre-amplifier to raise the signal level (impractical?) or a USB-connected microphone?  Or something like an external USB sound interface, like the Griffin iMic?
    http://www.griffintechnology.com/support/imic
    If you can't find one new, they come up on eBay a lot.

  • IEEE 1394 port doesnt work

    i purchase a model HP Compact 6510b with IEEE 1394 Port built in.I try to import my video from my sony DV camcoder to my laptop using 4 pin to 4 pin dv cable through IEEE 1394 port slot. The problem is .. my laptop doesnt detech my camcoder at all. Can anyone help me..please.

    jkdawson1 wrote:
    How can I determine if the ieee 1394 port on my Satellite A215-S4807 is a 4-pin or 6-pin?  the specs don't reference that information.
    Well, you can just count the pins, but I'm sure it's a 4-pin.  See this illustration:
    http://www.rainrecording.com/support/article?id=79

  • Nexus 7000 console port doesnt work both sup's

    I have an odd issue... I have one nexus 7k where I cannot get signal from either sup console port... I have another 7k totally fine.. I can't see anything different in the config and I don't have them broken up into vdc's either they are just 1 vdc so it's pretty simple.  it's almost like the console is shut off and the odd thing is its both cards.  Any help appreciated
    anything I can check?

    Are you using any type of telnet connection? I see that you say that the configs aren't different. That informs me that you were able to see the CLI at one time. Are you able to see the CLI when connecting directly to the console port from your PC?
    It could also be the baud rate of the telnet program you are using. Make sure you are using the default baud rate for the Sup model you are using.
    Also are you using the same Sup's? Once you push in the sups, one will be the active and one will be standby. If you are connected to the standby sup you will not be able to type any commands, but it will inform you in the hostname that it is the standby sup.
    Hope this helps.

  • Usb doesnt work

    i have a macbook pro 2011 and one of the USB ports doesnt work

    I periodically see this on my computer running mavericks and find I can restart (maybe even power down/up) and bring the port back to life. Have you tried this? I was almost thinking of reporting this as a(nother) Mavericks bug but I have no idea if this is just me or if others have the same issue.

  • I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions?

    I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions and not have to pay to have the entire main board replaced. Preferably something under $100.

    I don't think you're likely to find a set of external speakers that come with a microphone and plug directly into a USB port. There are USB audio cards that look like tiny flash drives but have microphone and headphone ports in them, to which you can connect a typical two-plug Windows PC headset with a microphone, or else you can connect external speakers and a stand-alone microphone. Those adapters typically cost under $10. I don't know anything about the quality of sound that can be expected from them.
    I have a Griffin iMic, which is much the same idea but larger, a bit more expensive (retail~$40), and perhaps delivers somewhat better sound quality (I hope so, but I don't know because I've never had occasion to try one of the little ones).
    http://www.google.com/products/catalog?oe=UTF-8&hl=en&client=safari&q=usb+sound+ card&um=1&ie=UTF-8&tbm=shop&cid=9618463009759678039&sa=X&ei=tgQoT5zYOMfZ0QHkiICw Ag&ved=0CHcQ8gIwAQ
    http://compare.ebay.com/like/320779457703?var=lv&ltyp=AllFixedPriceItemTypes&var =sbar

  • The left side of my ipad mini doesnt work. When i long press an app to transfer to previous window, it doesnt move to the previous one. It only happens when in portait position.

    The left side of my ipad mini doesnt work. When i long press an app to transfer to previous window, it doesnt move to the previous one. It only happens when in portait position. 

    Hope someone can help me

  • Microphone doesnt work all crackly

    Microphone doesnt work sound recorded or sent on FaceTime all crackly

    Ijftlf-
    If your iPad is still in warranty, show it to an Apple Store Genius.  If the Genius can not fix it, you may get a replacement iPad on the spot.
    If your iPad is out of warranty, or there is no Apple Store near you, look for an Apple Authorized Repair Center.  There may be one in your city.  If out of warranty, they should be able to repair the microphone for less than the Apple Store's replacement price.  <Apple Authorized Repair Centers>
    Fred

  • My microphone used to work about 2 weeks ago now it doesnt. ????

    my microphone doesnt seam to work. drivers all look up to date but still doesnt work.

    Hi tedrmart,
    Please post your Product number (please don’t post your serial number). Here is a link to help you find it:
    http://goo.gl/txzML  
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Please please help, skype microphone doesnt work since i updated the software to ios 7.0.4

    I use skype everyday to talk to my family, but since I updated the software to ios7.0.4, my microphone doesn't work.
    I even did a full factory restore and still not working. I have searched the web but nothing helps!

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
     Cheers, Tom

  • Built in microphone doesnt work

    My built in microphone doesn't work. Any tips to fix it? My webcam is also broken so I bought a USB one but that's not picking up sound.

    Is the built-in microphone listed as an input device in the Sound preference pane or in the Skype preferences dialog?
    If it isn't, there's a slim chance you might be able to solve the problem by booting in safe mode and then rebooting as usual, or by resetting the SMC.
    Mac OS X: Starting up in Safe Mode
    Intel-based Macs: Resetting the System Management Controller (SMC)
    If those steps don't work, there's an even slimmer chance that you might solve the problem by reinstalling OS X. Your profile says you're running 10.6.8. You would need your installation disc to reinstall that, which you probably don't have with you.
    Failing all that, you might be able to use a USB microphone, if you can find one. Don't buy another analog microphone with a mini-audio connector. It won't work.

  • Microphone of 8820 Blackberry doesnt work. Nobody can hear me!

    Hello people! Im in trouble. When calling i can hear people but people cant hear me! I tought it was software but im wondering if its not hardware. I bought it on ebay and i thinking about returnig it. thanks

    I took the phone into the Apple store and they said it was an AT&T problem and that I needed to have the SIM card replaced.  I did that and still had the problem.  So I went back to the Apple store.  The pretencious 'genious' said that one of the moisture sensors had been tripped and that was why my microphone wasn't working on calls.  The phone has never been exposed to moisture that I'm aware of. 
    He said dictation apps use another microphone on top of the phone.  He didn't have an answer as to why the problem only happened sporatically.  In any case, he eventually gave me a replacement phone.

  • MSI GF4 Ti-4200 doesnt work with WindowsXP

    I can't get the MSI display tools to work - it crashes,
    the vbios.dll doesnt load, it also crashes.
    the tv in doesnt work ,it crashes
    the tv out doesnt work ,it crashes.
    all the supplied software also crashes "application has encountered an error and cannot continue. sorry for any inconvenience"
    the intervideo software (windvr, wincoder, winproducer) and MSI PVI software all crashes as well.
    what's the deal with this stuff?  ?(
    I have a Dual AMD athlon Tyan thunder k7 motherboard,
    MSI Ti-4200-VTD video card and MSI tv anywhere card.
    is there any resolution for this?

    I'm sorry gfilitti if I don't have my system listed, but I thought my question was pretty simple...
    Has ANYONE been able to make the InterVideo WinProducer 2 software, that comes with the retail version of the MSI G4Ti4200-VTD64 card, work successfully under the Windows XP Home or Pro operating system?
    If the answer is YES, then I will begin investigating why my system can't.
    If the answer is NO, then I only ask for other people's recommendations of what software WILL work in place of that. I NEED those functions to work. That's why I paid extra for the VIVO.
    All we've heard so far in this thread are NO votes. I would like to see just how widespread this is. If I can find ONE person who claims it works fine on his/her computer under Windows XP, then my NEXT question would be if they had to do anything different to make it run, or was it just a straight install? Did they add the program patch available from the MSI website? See where I'm going with this?
    If you would REALLY like my system details, here ya go...
    ========================================
    CASE - ANTEC SX1000II with 4 internal 8cm fans
    POWER SUPPLY - ANTEC 400W "True Power" w/dual fans
    MOTHERBOARD - MSI 645E MAX (MS-6547 Ver 2.0)
    BIOS - AMI Ver 3.2 (10/21/02)
    PROCESSOR - PENTIUM 4 2.0aGHz (Rev/Step 2/4(9) )
    MEMORY - 1 Corsair 512MB DDR RAM (Winbond chips)
    DISABLED IN CMOS - FLOPPY Controller, AUDIO Device, MODEM Device, Serial Port B, MIDI Port, and GAME Port
    AGP SLOT - MSI G4Ti4200-VTD64 - IRQ 16
      DRIVER: MSI 31.00
      CAPTURE DRIVER -  nVidia 1.08
    SLOT 1 - Creative SB0090 Audigy Sound Blaster - IRQ 17
      DRIVER - Creative 3.0.0.18 9/20/02
    SLOT 1 - Creative SB1394 FireWire Controller - IRQ 18
      DRIVER - MS 5.1.2535.0 7/1/01
    SLOT 2 - NIC #1 D-Link DFE-530TX Ethernet - IRQ 18 (LAN)
      DRIVER - REALTEK RTL8139 5.396.0530.2001
    SLOT 3 - Adaptec 29160N Ultra160 SCSI Controller - IRQ 19
      DRIVER - Adaptec 6.2.0.0 3/19/2002
    SLOT 4 - EMPTY
    SLOT 5 - MSI SYSTEM D-Bracket
    SLOT 6 - NIC #2 NetGear FA312 Ethernet - IRQ 18
      DRIVER - Windows XP Pro native driver
    NOTE:
    NIC #1 is for home LAN
    NIC #2 is for Alcatel SpeedTouch External DSL modem
    SCSI DRIVES:
    ID 0 - COMPAQ (Seagate) ST318451LW, 18GB, 15K RPM
    ID 1 - QUANTUM Typhoon Atlas II, 18GB, 10K RPM
    ID 2 - Seagate ST39103LW, 9G, 10K RPM
    ID 3 - Plextor CD-RW PX-W1219S
    ID 4 - Toshiba DVD-ROM SD-M1201
    ID 5 - EPSON Perfection 1640SU Flatbed Scanner
    ATA/ATAPI DRIVES:
    Primary Master - No Connection
    Primary Slave - No Connection
    Secondary Master - MATSHITA LS-120 Ver F523
    Secondary Slave - No Connection
    USB DEVICES:
    DIAMOND SupraMAX 56K V.92 Model:SUP2920
    Generic Flash Memory programmer and other assorted USB devices on occasion.
    MONITOR - HITACHI SuperScan Pro 21 w/5-BNC input
    ========================================
    BTW, I would think when investigating a program's FLAT refusal to run, that the MOST important things aren't listed in these signature files. It has to do with what ELSE is running at the same time. Which services are running and which are NOT? What memory resident programs are loaded at boot-up? Any service packs installed? How about any security patches from Microsoft? Which anti-virus software (if any)? Which DirectX version? Personal firewall? Etc., etc.
    Granted, the hardware DOES have a factor, but I feel all of these are MORE important factors than the speed or brand of a persons hardware. I look at the signitures more as bragging rights than anything else.
    Now, this is just my opinion and may not reflect the feelings of the more sane people around me.  
    Cheers!

  • Microphone does not work in Facetime

    Hi
    I read other posts and in Maverik I didn't find simmilar problem, for most people their microphone does not work after few minutes, but in my case, microphone does not work at all in Facetime, so I can hear the other end, but they can not hear me! This happened after updating Mavericks.
    My Mac specs:
    Macbook Pro 2013
    OSx 10.9.1 (Mavericks)
    things I already tested:
    I tried to use headphone and without headphone, but it didn't make any difference
    Microphone works fine in Skype and other softwares (Audacity, YahooMessenger, etc.)
    Tried with WiFi and with Ethernet cable
    Internet speed is 2.3MBps
    Router's firewall does not have any restriction for certain ports
    Tried turning facetime Off and On
    Tried to call iPhone 5s, iPad2 and MacBook Pro each in different network and different countries!
    ... and finally searching internet for hours (which obviously came up with nothing)
    I'll be thankful if somebody help me through, all suggestions are welcome, so please don't hesitate to post.

    Same issue here....
    8-core Mac Pro, Lion, Original External iSight camera connected via FireWire 400 through the FireWire jack on the 23" Apple Cinema Display.
    Audio and video work fine using iChat and making video clips through any/all apps.
    However, using FaceTime.....incoming audio and video are fine, outgoing video is fine, but outgoing audio is missing.  Nobady can hear me.
    Sorry guys...you can't doll this one up or spin it in any other direction......it's a bug pure and simple.
    Feel free to fix it whilst you're dealing with all the other problems that Lion has.
    ....sT

  • HDMI to Mini Display Port not working?!?!

    Hi,
    I use my macbook Air (latest one with mini display port) to watch movies on my TV. I use a hdmi to mini display port adapter cable which worked perfect for about 6 months. Yesterday, I plugged my mac in and nothing appeared. I have no idea why- no settings have been changed.
    As usual, the screen goes blue and then back to normal but the TV screen is plain black. In the Display settings, the 'arrangements' tab is missing where I can set mirro displays things. I tried bying a new adapter and trying this with my sister's macbook pro but it still doesnt work.
    Any ideas on why this has happened & to how I can fix it?
    Thanks for your help

    This is probably NOT the solution you're looking for, but use a 3.5mm to 3.5mm (headphone jack) cable to transmit sound. I use stereo speakers with my setup, sounds far better than the TV.

Maybe you are looking for

  • HT1918 Why can't I put no billing information with an existing Game Center as the Apple ID?

    I want to make an Apple ID with existing Game Center, but I don't have a credit card so it won't let me. On an article, it says that I need to make a new one in order to put no billing information, is it possible to put none for my existing Game Cent

  • My Ipod keeps on saying "itunes has detected an ipod in recovery mode...."

    My Ipod keeps on telling me that i need to "itunes has detected an ipod in recovery mode.You must restore this ipod before it can be used with itunes". I have restored it numerous times What should i do about this? Thanks for your help.

  • WHERE TO SEE THE STATUS OF INFOOBJECT

    HI EXPERTS, IS THERE IANY TCODE TO FIND WHICH INFO OBJECT IS IN ACTIVE OR DELIVERED OR MODIFIED IN BW. PLEASE LET ME KNOW. CHEERS DILIP

  • Matrix Report with variable@incontext not working

    I had built a matrix report, using variable@incontext. I'm having a problem with my cell data. It seems that it is always using the value from the first record in the column instead of the actual value. ie in the example below, the data should make i

  • Exceptions in BAPI

    Hi ALL, Can u pls help me out with the following queries? 1. how can we handle exceptions in BAPI? 2.wats the major/important differences between BAPI and RFC?( im really confused) Pls help me out!!! <REMOVED BY MODERATOR> Jack Edited by: Alvaro Teja