Microphone Problem Windows 7 64bit

Hi My new system has a X-Fi Titanium Fatalty Professional installed, and sound seems to be okay. However, microphone does NOT work. Plugged in a different mic, same issue so it's the card OR drivers, or a config. Have tried to set all the options to 'line in', and still NO MIC. I'm sure there's someone in here that can help. Cheers.

where do i get that console for windows 7? when i run the update thing, i don't get it in the list of tools to install and here (?http://support.creative.com/downloads/welcome.aspx?nDriverType=3#type_3 ), it says only windows vista?
i don't really want to install all the tools and taking my chances, since i have no use for any of them except that console to set that flexijack to microphone... why the hell you can't do that in w7 any more like it could be done in xp is beyond me...

Similar Messages

System Update Problems - Windows XP 64bit with SP2

Hi,
I have been Googling away but can't seem to fix my error when running System Update 3.14 on Windows XP 64bit with SP2. I keep getting the following error at 9-10%:
"An error occurred while gathering user information"
Has anyone managed to get this working on this OS?
I have tried uninstalling and reinstalling and also uninstalling .NET 3.5 but nothing has worked.
Thanks.

Hi,
x64 Bit XP is not supported by TVSU, so I really doubt, that there is an official fix for this one.
Cheers

External Microphone in Windows 7 64bit

I have a MacBook Pro 15 MD104 with Mountain Lion. I'm also install Windows7 64bit Enterprise using Boot Camp. I'm download latest Sound Card driver with Boot Camp and install it (and all other devices driwer). Macbook has a one audio socket to combined 3.5 jack (input and output in one jack). I buy Razer Kraken Pro Headset specially for it, because it have this combined jack.
My problem is that in Windows, when i plug my headset in windows, it works only as headphones, microphone don't recognize and uses internal microphone of MacBook. In MacOS there is no problem and all works great. I think, that problem is in Boot Camp sound card driver. I try to download another, but i can't google it. Sound Card model is Cirrus Logic CS4206B (AB 83). There is no driver on cirrus site. What can I do with it?

I am not sure who else reads this but I got my mike working with Skype. I uninstalled the Cirrus driver (something AR77) and installed from the Apple OSX CD Bootcamp drivers the one with Cirrus for XP. Then I got the Cirrus High End device (not the other version) and voila.
Note, I started installing the Realtek on it first, also on CD, which helped my bro. But then this was the best approach.
I think: a) it is a driver issue for the built-in microphone b) Win 7 is like Vista, really, looks the same, feels the same, does not work the same (but I need it to get a Windows project done and evaluate). c) if Apple made a contract with the business application (the biggest) I work with I would no longer need Windows on it. Not for office, not for applications. Apple? Would you start aSAP negitiations?

Microphone problem window 8

Hi, I have had no problem whatsoever for a year now until 2 days ago when I was asked to upgrade my skype which I did. Since than my microphone is not fonctioning properly. It keeps cutting off when I talk with someone. I have check my setting on skype and on the computer. My microphone is working fine its only on skype that this is happening. I tried on my mobile as well and I get the same problem. I than thought it was my connection, which I had check by my internet provider but they told me I have a very fast connection. So now I have no option left, I have remove skype 4 times from my computer than I reinstalled and I get same problem. Please help!

I don't know what kind of headset or microphones you use, but have you try to update the latest Realtek driver from MSI GT70 driver page?
Also you can check this FAQ:
http://www.msi.com/faq/nb-238.html

Backup problems Windows 7 64bit on 2TB Seagate external hard disk

I have an I7 CP with Windows7 professional 64 bit, which is up to date windows wise etc. New seagate expansion 2TB, model Extension Desktop STBV2000200 fails to backup via Windows backup, whilst 2 other external disks (smaller capacity) work fine. Error
codes: 0x81000037 and 0x8078002A appear. USB2 ports are ok. Microsoft Netherlands was not able to sort it out. They suggested to format with slow speed and and standard settings. Lasted 19 hours. No success either. Can you advice please.
e lambij @ Hotmail . com

Hi,
This is a commom issue with Advanced Format Disks that have a 4KB physical sector size, which may causeincompatibility issues with existing software (including operating systems and applications).
Please refer to this article below and install the update in this article:
http://support.microsoft.com/kb/982018/en-us
Andy Altmann
TechNet Community Support

Pavilion G7 1365dx internal microphone problems (skype).

I just purchased this notebook and when I tried to use Skype, everything works except the other person can't hear me. Mic is enabled and not muted. Internal Mic (IDT High Definition Audio CODEC). System checked for updated drivers, system said drivers are up to date. Thank you in advance for your help.

Hello @Pistaba1975,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the microphone on your notebook is enabled, but will not record any audio on Skype. I would be happy to assist you in this matter!
Are you able to record audio using a different program on your computer? Were you able to record audio from Skype in the past?
In the meantime, I recommend following the steps in this document on Resolving microphone problems (Windows 8). This should help enable the audio-in when using the microphone.
Additionally, I also suggest following this resource on Microphone Troubleshooter to ensure that your Skype software is communicating the audio being transmitted to your audio-in device.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Lenovo D20, Type 4155-21G With 5x1.5tb Raid 5, Windows 7 64bit install problem.

H
Id like to just document a current machine and works and see if any thing is glaringly wrong..
Above spec machine has an onboard marrvel 66xx raid card, a raid 5 volume has been created, total useable space is around 5.5TB.
The software in play here is the following..
Orignal Lenovo recovery disk set, this is Rescue and recovery boot disk 1, then the OS which is Vista 32 Business, the disk label is actual 64bit but its not 64bit its 32bit.
The machine finally has to leave with Windows 7 64bit ultimate.
I have looked into the upgrade paths and so on and basicly you need vista 64bit ultimate in theory, certain hacks are possible such as renaming the os level or name via the registery, but this is dirverting from my post.
Here is what has been done and what has happend.
20th Jan.
Start of day.
Raid 5 volume created.
Factory recovery completed windows vista business 32bit.
Attempt to upgrade Windows vista business to Windows 7 ultimate from with in windows, windows 7 alerts this is not a compatable system etc.
At this stage since the 64bit upgrade is not possible from the known good lenovo state (lenovo vista business factory desktop etc) the second disks in the "Windows 7 32bit + 64bit any time upgrade package was ran.
The 32bit version of the Windows 7 ultimate was ran, this did complete sucessfully.
The 64bit version of the windows 7 was attempted once more from with in the newly installed Windows 7 32 bit but again this upgrade route is not supported.
At this stage a custom install was completed (which means a fresh install which wipes the drive) / fresh install, of the windows 7 64bit any time upgrade disk.
For some reason the Windows 7 64bit any time upgrade key failed to be accepted.
At this stage a second engineer repeated all steps completed to verify and on the second go around the FRESH install of Windows 64bit any time upgrade (stand alone install / custom etc) the key worked!..
This is were it gets interesting.
Lets recap, we have a D20 with 5x1.5tb sata hard drives in raid 5, all on the onboard marvel raid card.
Windows 7 64bit has been sucessfully installed, and of course the next step is to install the lenovo system update tool. (version for windows 7, I understand this is fully 64bit compatable..)
This was completed and pc doctor and one other misc application install, the system requested to restart and then ....
The raid BIOS of the marvel card reported that the raid had become degraded..!!
An inspection of the onboard raid information results that the disk 0 of the 5 disks, was no longer assigned to the RAID 5, with teh remaining several disks still "assigned".
At this stage the only option is to delete the raid five array and recreate it.
This has been done and the factory recovery process has once again been restarted and an attempt will be made to perform the custom install with hopefully the windows 7 64bit any time upgrade install detecting the previous version although I would say that it would not need to detect anything since this is now longer an upgrade but a custom fresh install.
Further information.
There is a System bios update from the 5th of Jan 2010, this has been burnt to cd and will be applyed against the machine shortly.
We have had some conversation about just how it is that a disk can fatally pop out from the raid five volume like this, was it a coincidence that it coninsided with the power cycle process dirrectly after the system update installation?
Tommorow a Windows 64bit OEM package will be applied against this machine and since we have the relivant driver file for the onboard raid card (sourced from the drivers and applications lenovo recovery disk set), there should be less of a problem in key acceptance.
Kind of a werid situation, what looks like a possible hardware problem and a stupid microsoft upgrade qulification problem.
Is there any thing stupid I have over looked?
Thanks, sorry for the long post but this is the story in full.
Note from Moderator: Fixed formatting issue.

21st Jan..
The D20 has sucessfully had vista business factory reinstalled and then Windows 7 64bit installed.
Dirrectly after the Windows 7 installation and power cycle, one of the five 1.5tb hard drives have dropped out of the raid, visable as "DEGRADED", uppon further inspection via control m, the middle drive (not drive 0 as before) drive 2 (0,1,2,3,4,5) has dropped out and is not marked as assigned, it is marked with no label or free.
This is high strangeness, it is my understanding that the RAID technologies are transparent to the OS so it should not be in any way the Windows 7 install triggering this, the last occurance was also during a Windows 7 power cycle but dirrectly after the system update tool being installed.
At this stage it would appear that Windows 7 64-bit used in conjunction with the supplment driver disk marked as (drivers and apps, windows xp vista, windows 7) is not able to complete and remain stable.
I suspect a possible driver issue but if this was the case surely the windows 7 install would not progress past the first installation point where the driver disks is required to actually use and see the array via the controler.
I will update this thread with more information as it becomes available.
Machine delivery eta to customer is tommorow so this is not good.

Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

Facing problem in sync from itunes - windows 7 64bit

Hi, I've been using iphone 4 for more than a year , i updated to ios5.0.1 and had no issued in it , but later on started facing problem in syncing my phone with itunes since i started using windows 7- 64bit , then i thought i might need to upgrade my device , so i upgarded to 5.1.1 but still having same problem , whenever i connect my iphone to itunes and start sync , it takes a bit long for back up and when it comes to changes ,after saying 'changes to be apllied ' it gets stuck to 'Copying 1of 59 anything ( music, videos,apps ) ' and then it stops responding and i get an error message 'UNBLE TO COPY/SYNC DUE TO ITUNES TIMED OUT ' or something I'm unable to figure out whats the problem , i unistall itunes and then downlaoded new version 10.6.3 , still facing same problem , unable to sync anything but i have noticed one thing i'm having this issue since i started using windows 7 - 64bit , earlier there was no issued is 64bit spportable to itunes ??? plzzzzzzzzzzzzzzz help , Regards,Sweety sadanaios5.1.1 user

No problems about the further questions.
The term EHCI roughly means "USB 2.0 host controller". So pretty much any modern nVidia chipset will have one of those. So the issue ends up boiling down to whether or not you've got an nVidia chipset, I think.
I went searching through the HP Support forums, and I found a user-supplied FAQ that suggests that you do have an nVidia chipset. See Daniel's second post in this thread (the one on chipset drivers):
[Windows7 Upgrade Guide for dv6000/dv9000 models|http://h30434.www3.hp.com/t5/Operating-systems-and-software/Windows7-Upg rade-Guide-for-dv6000-dv9000-models/td-p/179816]
... but "suggests" isn't quite the same thing as "confirms".
I'm thinking it might be worth posting over at the HP Support forums and asking if you have one of the HP models that requires the update for Windows 7 described in the following post. (The update in question is actually the same as the Microsoft hotfix I linked you to earlier.)
[Driver update for Win7 USB issue on nVidia chipset systems now available|http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for- Win7-USB-issue-on-nVidia-chipset-systems-now/m-p/188193]
(Not trying to get rid of you here ... I just want to get you on the radar screens of people with a bit more specific knowledge about the chipset on your particular HP model. I figure the HP forums would be a useful place to go for that.)

Problems (bugs) with Project Explorer LV8.5.1 Windows Vista 64bit

Helo all,
I am using Windows Vista 64bit with all updates and service packs on an ASUS G1 dual core 4gig memory. After writing code for a while I find that I cannot execute my top level vi from the project explorer. I can run the vi from outside the project no problem. If I try to create a new project and load the vi into it the LV hangs and the windows task manager cannot kill either the vi or the new project explorer, I have to reboot the computer to recover. I have attached the vi.
regards,
Karl
Attachments:
FS Test Main V0.9.vi ‏164 KB

Hi Karl,
I am having a look at this issue--I shall try to reproduce it and get back to you with my results.
Ipshita C.
National Instruments
Applications Engineer

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Windows 7 64bit iTunes 11.1.4 Up Next Drag and Drop Problem

OS: Windows 7 64bit
iTunes version; 11.1.4
Problem: In the normal iTunes window dragging and dropping songs in the Up Next menu gives no real-time feedback of items being moved or the list being scrolled. If I attempt to drag and drop then the window updates itself as if it had scrolled, but I get no visual feedback during this process.
I can confirm that Up Next operates as expected while using the Mini Player (either reduced or expanded), but the main window does not.

Doublechecking. Do you still get that particular issue if you update to iTunes version 11.1.5.5.

Problem installing itunes on windows 8 64bit. Installation gets stuck on Status: (blank) literally blank

Problem installing itunes on windows 8 64bit. Installation gets stuck on Status: (blank) literally blank. I really need to install this since I have only 1 PC and i just bought the new iPhone 6.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Microphone , Audigy Se and Windows 7 64bit

*Microphone , Audigy Se and Windows 7 64bit's I have wasted several hours today trying to resolve this issue upto and including trawling the internet for a solution and completely removing and reinstalling drivers from disc and updating twice. Ultimately I downloaded an update from WIndows - Absolutely nothing, nada works!
I have the Mic Jack for my headphones plugged into the blue line in port - tried and tested on my system card (which works) but I consistently get Line--in Currently Unavailablke for this port suggesting that Creative are totally out to lunch on this one.
I have right-clicked and set levels, tried setting it as default, etc, etc, etc... nothing.
Has anyone succesfully got their mic to work uunder Win 7 64bit's
- Love how it says on the box that Vista nad WIn 7 are supported,,,? guess the partially bit was omitted!
I loathe wondows on any given day of the week but my Mac is currently down so I have no choice but to use this, my wifes machine... NOthiong but lost time whereas if I were on the mac I would be using that time producti'vely, with working software too I might add!
Hope someone has a fix for this because this machine is just one reboot away from going out the frogging window!!!

'sHi,
Are you using this driver? Are you getting no sound from your microphone or is nothing being recorded?
Please go to Control Panel, Sound make sure that the Microphone option is set as default and that the mic levels are adjusted accordingly, not mute.
If this is not working for you, Customer Support can be contacted using this http://support.creative.com/Downloads/searchdownloads.aspx?filename=

Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

Microphone Problem Windows 7 64bit

Similar Messages

Maybe you are looking for