Microphone problem X-fi titanium and Windows 7

? Just got my X-fi titanium, installed Daniel_k's X-fi supportpack .0. When i try to use my microhphone, it seems like "What you hear" is enabled. I can hear my own voice in my headset.
Tried to disable "What you hear" in windows sound options, but it does not help. Tried to change from game mode to entertainment mode also changed to audio creation mode in creative console launcher, but nothing seems to help.
Anyone got the microphone working properly in windows 7?
The sound output works really fine though, much better sound quality than the onboard soundcard. (I have disabled the onboard sound and uninstalled it's drivers)
Also tried to connect my front panel from my Antec P82 with the Hd audio cable, same issue here, I can hear my own voice.
Message Edited by rikke86 on 0-20-2009 08:47 [email protected]

I have a X-Fi Titanium Fatalty Pro running Windows XP SP2 and experienced the same problem (I'm running the original Titanium drivers). I usually keep mine set on Game Mode, so I went and checked the mixer in creative console to check my volume levels and realized that I had the volume turned up on the line-in/microphone that is next to the recording line-in/microphone volume. All I had to do was mute the line-in/micropone volume (NOT THE RECORD VOLUME) and bingo, no more hearing myself talk into the mic as I talked.

Similar Messages

  • SOUND MUTING WITH XFI FATALITY TITANIUM AND WINDOWS 7

    5SOUND MUTING WITH XFI FATALITY TITANIUM AND WINDOWS 7z Ok sorry if this hasbeen covered before but I searched and couldn't find it so here goes:
    I have a two month old XFI FATALTY TITANIUM CARD WITH THE FRONT PANEL BREAKOUT BOX.
    It showed up staright away as a hi fi device and the optical output when selected works ok I dunno about surround sound it simply plays great stereo through my Arcam DAC connected up to my stereo.
    Problems began when I decided to install the Creative Software. What happens i sit plays for maybe o mins then mutes also I primarily use i tunes and it wont play anything until a few seconds after the music starts.
    This is just on optical out if I use standard phono to 3.5mm jack its fine.
    What puzzles me is why this happens when using the creative software ? Reverting back to the pre creative software it plays fine I would just like to take advantage of the various functions suplied with creative software?
    Any ideas please. FWIW I Completely deinstalled the card and installed? abasic CMI 8738 card and that does the same so maybe its windows 7
    Oh spec wise Windows 7 32 bit
    4GB RAM
    Asus MOBO

    Weird... I changed nothing and yeterday it worked...
    I just understand this, but what the hell?

  • X-Fi Titanium and Windows 7 installation disk

    Hi,
    I've bought a X-Fi Titanium card which came with a driver?CD, I would like to know if the driver CD which came it's safe to install on Windows 7, or to download the drivers and Control Panel from the web an to install them instead.
    The CD contains also applications besides drivers, but I think they are more Vista compatible since on the CD is copyrighted 2008.
    So it's ok to install the CD and then to apply the updates from the web, or to install only the web drivers and control panel ?

    Re: X-Fi Titanium and Windows 7 installation diskT This is the best thing to install to take care of all your needs:
    <a rel="nofollow" href="http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485"]http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485[/url]
    Then you can update to the newest Creative driver and applications afterward. The software CD works in Windows 7, but I felt that my system was sluggish and unresponsi've afterward. So, I recommend you try Daniel K.'s pack, and then you can upgrade your driver and any other applications that Creative has updated since. There are a few things in the installation scripts for the applications and drivers on the CD that just dont work, in my opinion. That is why Daniel made his package, because he wanted to integrate things a bit more smoothly. I have run an X-Fi Fatality PCI and now my Titanium Fatality PRo PCI-express card with the support pack and it works great under XP, Vista, and Windows 7 in either 32 or 64 bit flavors.

  • [Vista x64] Microphone problems with X-Fi and 2.15 drive

    Hi guys,?I'm having a problem with the 2.5 drivers on my X-Fi Platinum card, under Vista x64. It seems the microphone inputs (both on the card and on the breakout box) have problems, any recordings stutter and pop rapidly, making any recordings (or voice chat)?quite useless. This issue doesn't occur with the 2.3 drivers. Is there any known solution to this problem yet?My system: e6600 CPU, Asus P5W-DH motherboard (975X chipset), 4GB RAM, 8800GTX, X-Fi Platinum. Thanks.

    hey Darkman,
    since I never had this problem with installing this software, I cant really tell whats wrong, but you dont need it anyway to use the x-fi.
    but you may want to try one thing, since it crashes at 27% something may still be in use, so check your task manager and close everything that has CT in its name. then try reinstalling again. If that still doesnt work, try to empty your temp folder, its located in documents and settings/user you are/local settings/temp
    if that still doesnt work, try maybe something stupid, wait a bit longer than usual and keep the install window in the front to watch the process, maybe your pc is just a bit slowed down by other software so it may take longer than normal

  • Problem with remote control and Windows 7 - HP Pavilion 6301eu

    I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

    Hi John:
    Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
    There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
    I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
    Thanks for your help though and if you have any other ideas, I'm all ears.
    Mark

  • Problems with Active Directory and Windows 2003

    Hello,
    I'm using Mac OS X Server 10.4.9 with Active Directory bound to a Windows 2003 Active Directory Domain. I can bind successfully to the domain using the graphical interface. Then in Samba I can access shared directories using Windows users. However, after some time somehow there are problems and Windows users aren't authenticated anymore on the Mac. I've looked at the firewall and there are no denied packets from the Mac. There are two servers in the domain, all clocks are synchronized and domain information is up to date. When I unbind the Mac, I can see the machine account being deleted on both domain servers and created too on both machines when I bind to the domain.
    Problems occur when I try login in using ssh or samba do I think this is a problem with the AD module.
    I turned on debugging messages on DirectoryServices:
    sudo killall -USR1 DirectoryService
    When in Windows, using the Administrator user I try:
    net use \\10.0.0.1 /user:domain\Administrator
    Where 10.0.0.1 is the Mac.
    In the Mac I get from
    tail -f /Library/Logs/DirectoryService/DirectoryService.debug.log |grep ADPlug
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling OpenDirNode
    2007-06-27 10:48:38 CDT - ADPlugin: Opening Specific Node domain.com.mx
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling CloseDirNode
    2007-06-27 10:48:42 CDT - ADPlugin: Calling OpenDirNode
    2007-06-27 10:48:43 CDT - ADPlugin: Opening Specific Node domain.com.mx
    2007-06-27 10:48:43 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Calling GetRecordList Routine
    2007-06-27 10:48:43 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:43 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:43 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:43 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:43 CDT - ADPlugin: Calling CloseDirNode
    I really don't know what to do. The Windows Event log shows no messages. The link used to work and there have been no changes in the domain servers.
    The key line seems to be:
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    But I don't know what that ADSEngine.mm is.
    XServe G5   Mac OS X (10.4.9)  

    Hello.
    Thanks for your reply.
    I tried the net use with a drive letter with and without the /user switch. When I use a domain user domain\user1 I can't connect. When I use a user local to the XServe it works.
    When I use
    net use x: \\10.0.0.1\share /user:domain\user1
    I get prompted for a password, but it doesn't work.
    I checked the firewall and all packets to or from the mac are accepted, no denied or dropped packages.
    I already went through the MS document on fw ports. Before I opened to Kerberos ports the binding failed. No the binding work OK.
    Some users who were authenticated yesterday still can access files using the Windows domain accounts. It's new users trying to connect those who have problems.
    This is what the Samba log.smbd log shows:
    [2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2007/07/04 14:58:46, 0] /SourceCache/samba/samba-100.7/samba/source/auth/authutil.c:make_server_infoinfo3(1138)
    makeserver_infoinfo3: pdbinitsam failed!
    [2007/07/04 14:58:46, 0] pdbods.c:odssamgetsampwnam(2329)
    odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'user1'!
    [2007/07/04 14:58:46, 2] /SourceCache/samba/samba-100.7/samba/source/auth/auth.c:checkntlmpassword(367)
    checkntlmpassword: Authentication for user [user1] -> [user1] FAILED with error NTSTATUS_NO_SUCHUSER
    This is what the DS log shows:
    2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Calling GetRecordList Routine
    2007-07-04 14:58:46 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-07-04 14:58:46 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-07-04 14:58:46 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=user1)(sAMAccountName=user1)(displayName=user1)( mail=user1)(userPrincipalName=user1)(userPrincipalName=user1@*)))
    2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-07-04 14:58:46 CDT - ADPlugin: Returning 0 Results
    2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Put 0 records in Buffer for RecordList
    XServe G5   Mac OS X (10.4.9)  

  • Problem With Captivate 4 and Windows 8

    Hi,
    I've a problem with Captivate 4 on Windows 8 projects :
    The mouse is not tracked.
    I've applied the last patch for this version (11/15/2011).
    Is there another patch for this ?
    Thanks a lot.

    Hi there
    I know this will come off as sounding snarky, but please know it's honestly not intended that way,
    Windows 8?
    I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
    Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Problems with captivate 8 and windows 8

    I´m using captivate 8 and windows 8, and I am having problems with the visualization and publication of my projects. For visualization, there is a message of an error with syntax of the files ou directory, and nothing happens. For publication, I can´t see the project published in the browser. It opens only a text file, with the codes. Is there anyone thar can help me with that?

    Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

  • Problems with Acrobat 8 and Windows 7 64 bit

    Hi all
    I need help with Acrobat 8 and Windows 7.
    During the installation I'm asked to locate the file AdobePDF.dll on the disk. Selected the file in C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF\AMD64.
    The installation finishes without any other problem.
    The problem arises when I want to create a pdf from a Word document. I'm using Office 2007. When I select he option to create a pdf from a file, I get message in the attached image.
    If I try to used the Adobe PDF printer from within Word, nothing happes. The small printer icon apprears in the Windows task bar, but that is all. If I double click on the icon, I can see the print job, but that's all. There is no dialog box that asks me to save the file.
    Assistance will be apppreciated.

    Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

  • Compatiblity problem with cs 5 and windows 8?

    Is there any compatibility problems with indesign cs 5 and windows 8? Its very choppy on my computer. Its a windows 8 laptop with 32 gb of ram and 2 tb disk space. It shouldn't be a problem with lack of resources. I was wondering if there is anything i can to to make it less choppy. Also the scroll bars on the side and bottom won't scroll I need to use the space bar which is fine but can be annoying at times. Sometimes the side menu boxes wouldn't work correctly sometimes they will. I tried to reinstall the program and it didn't change anything. I also tried using the windows troubleshooting where you can tell the computer to use old settings for older programs. Once in a while it'll also crash. Indesign works great on my windows 7 desktop. I didn't know if there was a preset or something that might help resolve the issues. I can use the program but I have to fight with it so much sometimes its not worth using on the laptop. thanks

    I didn't even try to install CS5 on Win 8. The only thing I have on my desktop and laptop is CS6.
    I did read someone having problems with scrollbars but that was on a Surface Pro tablet.
    Bob

  • Can login to Xmarks on Mac, 10.6.4, no problem, but running parallels and windows XP and Firefox on that, I can't login to Xmarks since it won't accept my password, and I'm asking who to contact to fix this problem with Xmarks?

    If the question had been asked before, I would have read the answer. Can you make this support any more useless?
    I'm trying to run Firefox on a Mac with Parallels and Windows XP. I can use Firefox, that's fine, what I can't do is sync my bookmarks. They are all synced on both macs, and my old PC, a really slow Dell L110, thus trying to use Parellels. Is there any way to contact someone who can look at why my log in to Xmarks won't work on Parallels? Or if there is a support page somewhere where one can actually get some answers, please let me know. Thanks, Rob Rand

    Same issue - however firefox will open but I can not click on only of my tool bar shortcuts - the writing on the google age is greyed out so I can not click on anything. Still no resolution? I have deleted the folders and re-installed - it will open and then locks and it will not work????

  • Problems with shutdown, expose and window switching

    Hi there,
    Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
    Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
    I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
    Any thoughts would be gratefully received.
    TIA,
    Mat

    This sounds interesting.
    Can you post a copy for the rest of us to see?
    As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
    Also, are you creating an installer and using that to install? If not, you may wish to try that.
    Try to take over the world!

  • [T410] discrete gfx - Problem with Video Card and Windows Aero -anyone using 4Gb memory modules?

    [3/3/2010 Update]
    There's a issue of using 4Gb sticks on T410 currently that results in video output artifacts and aero interface problems when using Lenovo supplied drivers v8.16.11.8825. I think I can call it confirmed (Three people including me face this issue).
    Possible workaround is to install modified EliteBook 8440p video driver (read along this thread) comes with a BIG drawback of not being able to change brightness level within Windows 7. To sweeten it a little bit - you can set luminance level at POST screen, when computer boots up.
    [Original Message]
    Encountered strange behavoir of my T410.
    I have a T410 with 256Mb of Video Memory and 1440x900 display, a T61 with 128Mb of Video Memory and 1400x1050 dsplay and external monitor HP w2338h with 1920x1080 resolution.
    If I connect external monitor to my T410 and launch Visual Studio 2010 Beta 2 - image blinks and comes back with Aero disabled. Looking through event logs reveals the lack of memory. Entry information can be found further.
    Now If I do the same with my old Thinkpad T61, connect the same monitor using the same cable - I can open as many Visual Studio 2010 Beta 2 instances I like (tried 5) and nothing blinks and Aero stays enabled.
    Actually I find ridiculous, a notebook with more VRAM cannot archive the same performance as notebooks with less.
    Does anyone know what path should I pursue to solve this issue?
    UPDATE: Simply running multiple instances of Visual Studio 2010 Beta 2 without external monitor causes Aero disabled as well.
    Log Name:      Application
    Source:        Desktop Window Manager
    Date:          2/4/2010 7:32:21 PM
    Event ID:      9020
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:     
    Description:
    The Desktop Window Manager has encountered a fatal error (0x8007000e)
    Error 2/4/2010 7:32:21 PM Desktop Window Manager 9020 None
    Solved!
    Go to Solution.

    mat3y wrote:
    I have the same problem with T410 and aero disabled.  I am not using VS and I get this error anyway.
    The Desktop Window Manager has encountered a fatal error (0x8007000e).
    This must be buggy drivers, on Lenovo download site is just the one and the only initial driver for T410 graphics card.
    What software were you actively using when this error occured?
    Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
    Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

  • Problem with K9N Ultra and Windows 7!!

    Hello,
    I have the following system:
    - K9N Ultra (MS7250 - Version:2.0)
    - AMD Athlon 64 3500+
    - 4x Kingston KVR533D2N4/512
    - NVIDIA GForce 7300GS
    - Seagate Baracuda: ST3120827AS (7200rpm)
    - NEC DVDRW ND4571A
    I am running Windows XP SP3 but when I try to install Windows 7 (either 32 or 64 bit versions), when the system boots up, I choose to run from CD/DVD, the files are being loaded in the beginning but then the system is stuck in the next screen where it says Starting Windows with the green bar. I have left it for up to 90 minutes and it remains there, no change. I have tried with several different disks, always the same. I tried disabling legacy USB drivers, disabling on board audio, disabling USB and having a normal keyboard and mouse, always the same, no change whatsoever, the system halts at the same point every time.
    Can someone please offer some help?

    i tried once more, again disabling onboard audio, legacy, floppy, everything.....same thing, when the files are loaded and the screen goes at the green bar, the DVD spins down and halts there for ever.
    i am really pissed with this problem. i have installed windows 7 in all of my computers and this is the only one that absolutely refuses for windows 7 to be installed! 
    hmm..what do you mean about the PSU? why would the installation of 7 have a problem with the PSU? 2 days ago i installed again windpws xp sp3 (just to see if they would install in contrast to 7) without a problem. i am really tired of changing keyboards, DVDs, taking RAM in and out etc to it...i could live without the need to take a PSU out of another pc and install it to that one, is there some BIOS fix for the problem you mention?
    the bios is version 3.00 from what i read.
    also..what is nvidia boot agent that is the fourth option of boot in my bios??

  • Problem with PC Suite and Windows 7 Home Edition 64-bit

    I installed PC Suite on my desktop with Windows 7 Home Edition 64-bit installed.  I was able to eventually run PC Suite (granted it needed to run in XP SP2 compatibility mode) and sync my calendar on my W518a cell phone with PC Suite via Bluetooth communications.  After I turned off my computer and restarted it, I could no longer open up PC Suite...its icon appears in my system tray with a red X over it as if it can't find the program.
    The SonyEricsson website indicates PC Suite can run with Windows 7.
    What is causing the problem I am having?  How do I get this corrected?

    I have downloaded and reinstalled the PC Suite software.  Although it is not working as well as it should, as long as I have my cell phone on with Bluetooth enabled prior to clicking on the icon to open the application, it seems to work OK.  Otherwise, when it opens, it just hangs and the only way you can close the program is to get into Task Manager and force it closed when its status is showing as "Not Responding".  I also have found that just "closing" the PC Suite window does not close the application...you have to click on the option to "Exit the Application" otherwise you continue to have it in your system tray with a red X over the icon.

Maybe you are looking for