Microphone Problems with Skype

Everyone I skype with can't hear me unless I turn on my boost and sensitivty on my computer settings in the Sound section of the Control Panel. When I click on the 'Listen to this Device' I can hear myself clearly and at a comfortable hearing range. Then I look to skype and see that Skype's sensitivity matches my computer visually, but when I speak it is either super faint or not there at all.
I have to turn on boost and sensitivty just so Skype can capture my voice. I made sure my drivers were updated, my cords wasn't broken, things are plugged in properly, reinstalled my driver, and so on and so forth. This is starting to irritate me and I just want to have a nice time with some friends on a call without constantly having to fix my sensistivty on the microphone, when the computer says it is all fine and Skype says turn up the sensitivtiy.
Attachments:
DxDiag.zip ‏9 KB

Please,  run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Similar Messages

  • Audigy 2 ZS Platinum microphone problem with Sk

    I am having difficulty getting my headset to work with SKYPE when I plug it into the platinum front panel (mic2). I can hear myself through my headset or speakers, I've even managed to record a message that can be played back using wavestudio (after?tinkering), but I cannot get the thing to work with skype. I have upgraded from a Soundblaster Li've! card, something that had no problems with SKYPE. Since upgrading, my friends think I've become a mute. I've checked every setting I can think of without success. Does anyone have any ideas on anything I might have overlooked??

    I've done as you asked but I still have problems. Skype works now but I'm still having difficulty, as I have discovered that the only way I can get the mic to work is to swap the REC column within surround mixer to MIC2. Then it works. I thought MIC2 was a shared socket that enables you to connect a second microphone, was I wrong?I also sound like a dalek that is trying to gargle with a glass of water, so there's still things to be done.
    Also, any changes I make to surround mixer seem to revert back to the defaults after a period of time.So I have to keep making the same changes when I want to use skype.Can I set up my own defaults?
    Message Edited by PourVendre on 03-25-20062:04 PM

  • Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

    Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

    Sounds like you need to contact skype.

  • I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE

    I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE
    == This happened ==
    Not sure how often
    == After innstalling windows 7

    As a suggestion I'd put the Text_io segments into their own begin - exception - end sub-blocks within the main code. This way if Text_io does raise an exception you can catch it earlier as it may be able to recover - That is if it is a text_io exception.
    Other than that you;ll have to step through in Debug.

  • I have problems with skype

    I have problems with skype I can not get to the phone on a stationary Russia. why?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what problems with iPhoto are you having?  Describe in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • Is there a problem with skype at the moment?

    Hello folks.
    I'm running a G4 and 10.411 using an old version of skype with a software patch that I found in one of the skype topics on this site. It has been working fine for months now. I don't use video just audio. I have a subscription to call land lines. The problem I am having is that I can call out and hear the person I am calling, but they can't hear me. Is there a problem with skype today? Or have they made changes as of today that do not permit people to use the patch and an old version of skype? Any information would be much appreciated.
    Solved!
    Go to Solution.

    The problem has seemed to have gone away. The problem started yesterday on two different computers. Today, on one of the computers I ran a utility called Mcjanitor that I had installed years ago but very rarely ran it. I neglected to try skype prior to running the utility. On computer #2 I tried booting from an old utility disk called techtoolpro. I was unable to boot from the disk after several attempts and restarts. Both computers are running better and skype now works again on both. I sent an email earlier today to a tech support guy from my ISP about my recent problems with skype. In conclusion I can't explain why skype now works on both computers. I can only guess that I reset something when I used (attempted to use) a utility disk. The other possibility is that my ISP guy did something on his end. Or, lastly, that skype had problems that were remedied by skype today.

  • Last update to ios6 - worst ever, facetime does not work as it used to, problems with skype

    last update to ios6 - worst ever, facetime does not work as it used to, problems with skype, losing connection or no9t connecting facetime to face time. Do something with it.

    I'm not sure yet, but It may be as simple as "settings", "FaceTime" "Off"

  • Problem with skype sound on headset

    Hi. I have a problem with skype sound on my headset, when im talking to my friend I can hear him on my headset while the rest of the sound is on my speakers. How do i change that so i could hear all sounds on my headset? 
    Solved!
    Go to Solution.

    Hi rajababu3455, Can you please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-​create-log-files under Skype for Windows Desktop and attach it to your post?
    This will help us investigate and solve the problem you are experiencing.
    Thank you

  • Problem with Skype and Wireless Networks

    I have been having a problem with Airport for about 10 months. Long winded explanation follows.
    Initially file transfers over wireless networks were extremely slow but this seems to have been that 10.5.2 update problem. There is a remaining issue when I use Skype on my Mac (details below) connected to a wireless network the incoming and outgoing audio drop out for 1 - 3 seconds at irregular but frequent intervals (approx every 5 - 10 seconds). This is regardless of the wireless network I am on - and that is dozens of them all over the world. Note it is voice only calls, not video. Apple has replaced the Airport card and the mother board; the OS has been reinstalled; test accounts set up but nothing fixes the problem.
    At one point I had temporary relief by switching off 'Configure IPv6' in System Preferences/Network/Airport/TCP/IP. This worked for a month or so but now the problem is back as before.
    All other aspects of wireless activity are fine. Wireless firmware is 1.4.4.
    I have worn out my welcome with the usually sensational help desk. Any suggestions out there in Mac Land?

    Hi there
    Been a hectic week here getting this problem resolved. It is all OK now. Here is what we found and how it was done.
    When Airport was playing up we set up an unlimited ping of the wireless router in the office. This is what it showed:
    PING 10.10.10.1 (10.10.10.1): 56 data bytes
    64 bytes from 10.10.10.1: icmp_seq=0 ttl=255 time=1929.885 ms
    64 bytes from 10.10.10.1: icmp_seq=1 ttl=255 time=929.788 ms
    64 bytes from 10.10.10.1: icmp_seq=2 ttl=255 time=2.633 ms
    64 bytes from 10.10.10.1: icmp_seq=3 ttl=255 time=1.845 ms
    64 bytes from 10.10.10.1: icmp_seq=4 ttl=255 time=1.941 ms
    64 bytes from 10.10.10.1: icmp_seq=5 ttl=255 time=1922.656 ms
    64 bytes from 10.10.10.1: icmp_seq=6 ttl=255 time=922.724 ms
    64 bytes from 10.10.10.1: icmp_seq=7 ttl=255 time=2.012 ms
    64 bytes from 10.10.10.1: icmp_seq=8 ttl=255 time=1.974 ms
    64 bytes from 10.10.10.1: icmp_seq=9 ttl=255 time=2.283 ms
    64 bytes from 10.10.10.1: icmp_seq=10 ttl=255 time=1918.448 ms
    64 bytes from 10.10.10.1: icmp_seq=11 ttl=255 time=919.372 ms
    64 bytes from 10.10.10.1: icmp_seq=12 ttl=255 time=2.609 ms
    64 bytes from 10.10.10.1: icmp_seq=13 ttl=255 time=2.037 ms
    64 bytes from 10.10.10.1: icmp_seq=14 ttl=255 time=2.259 ms
    64 bytes from 10.10.10.1: icmp_seq=15 ttl=255 time=1921.022 ms
    64 bytes from 10.10.10.1: icmp_seq=16 ttl=255 time=920.825 ms
    64 bytes from 10.10.10.1: icmp_seq=17 ttl=255 time=2.416 ms
    64 bytes from 10.10.10.1: icmp_seq=18 ttl=255 time=2.063 ms
    64 bytes from 10.10.10.1: icmp_seq=19 ttl=255 time=1.954 ms
    64 bytes from 10.10.10.1: icmp_seq=20 ttl=255 time=1917.649 ms
    64 bytes from 10.10.10.1: icmp_seq=21 ttl=255 time=917.617 ms
    64 bytes from 10.10.10.1: icmp_seq=22 ttl=255 time=2.018 ms
    64 bytes from 10.10.10.1: icmp_seq=23 ttl=255 time=2.057 ms
    64 bytes from 10.10.10.1: icmp_seq=24 ttl=255 time=2.106 ms
    64 bytes from 10.10.10.1: icmp_seq=25 ttl=255 time=1916.329 ms
    64 bytes from 10.10.10.1: icmp_seq=26 ttl=255 time=916.347 ms
    64 bytes from 10.10.10.1: icmp_seq=27 ttl=255 time=2.020 ms
    64 bytes from 10.10.10.1: icmp_seq=28 ttl=255 time=2.151 ms
    64 bytes from 10.10.10.1: icmp_seq=29 ttl=255 time=2.005 ms
    64 bytes from 10.10.10.1: icmp_seq=30 ttl=255 time=1915.818 ms
    64 bytes from 10.10.10.1: icmp_seq=31 ttl=255 time=915.821 ms
    64 bytes from 10.10.10.1: icmp_seq=32 ttl=255 time=2.091 ms
    64 bytes from 10.10.10.1: icmp_seq=33 ttl=255 time=2.061 ms
    64 bytes from 10.10.10.1: icmp_seq=34 ttl=255 time=2.064 ms
    64 bytes from 10.10.10.1: icmp_seq=35 ttl=255 time=1911.739 ms
    64 bytes from 10.10.10.1: icmp_seq=36 ttl=255 time=911.753 ms
    64 bytes from 10.10.10.1: icmp_seq=37 ttl=255 time=1.923 ms
    64 bytes from 10.10.10.1: icmp_seq=38 ttl=255 time=2.788 ms
    64 bytes from 10.10.10.1: icmp_seq=39 ttl=255 time=1.911 ms
    64 bytes from 10.10.10.1: icmp_seq=40 ttl=255 time=1907.626 ms
    64 bytes from 10.10.10.1: icmp_seq=41 ttl=255 time=907.528 ms
    64 bytes from 10.10.10.1: icmp_seq=42 ttl=255 time=1.847 ms
    64 bytes from 10.10.10.1: icmp_seq
    and so on.
    After discussion with tech support they said the Airpot card had to be replaced. This was done with admirable expediency and I got the MBP back in 36 hours. On testing it the same problem was still there. Identical pattern on the ping test, the fault was not the hardware.
    Once more a call to Apple and another tech. This time we booted from the OS 10.5 install disk and ran the ping test. I ran it for a few hours without seeing the fault, it worked fine. The problem had to be in the operating system.
    After backing up all the data I zeroed the drive and did a clean install of the OS. Bingo! Problem gone.
    So after 10 months, two airport cards and a mother board, the issue was in fact something corrupt deep in the OS.
    So to anyone having similar problems with Airport, run a ping test as described above. If you see that kind of pattern, try a clean install before going down the hardware road.

  • Is apple going to fix the problems with skype

    There is a major problem with dropped IM and video with Skype from the apple products. What is being done about this?

    Is the issue just with Skype or FaceTime as well?
    Make Sure iOS is updated to the latest version
    Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    Have you tried deleting the app and reinstalling ?

  • Mic problem with skype

    Not sure what the problem is. My mic seems to be working but skype does not recongnize. it used to work but now it does not.  Only change that i can see in upgrading to mountain lion.

    Please verify that you turn OFF the automatic volume adjustment in Skype. If the volume is still low, you can try the following bypass: install a virtual audio device that will be the middle man between the physical microphone/speakers and Skype. One option is SoliCall Pro which is usually used as a noise cancelling software.

  • Hello i have problem with Skype 6.9 on my Windows ...

    Hello every one ,
    i have problem with my laptop so the problem is that i update my windows from 8 to 8.1.
    Everything is fine with update but when i try to open my skype  windows said that program is not working right and windows will close it.
    So i uninstall my skype and i download 6.9 version of skype.
    I installed right and when i try to open again i see the same message " windows will close that program becouse is not working right"
    please i need help .i try everything but without succsses
    Sorry about my english
    Tnx in advance

    TheScorpi wrote:
    Име на приложение с грешки: Skype.exe, версия: 6.9.60.106, времево клеймо: 0x524c0c0b
    Име на модул с грешки: msvcrt.dll, версия: 7.0.9600.16384, времево клеймо: 0x52158ff5
    Код на изключение: 0xc0000005
    Отместване на грешка: 0x0000b1b0
    ИД на процес на грешка: 0x1914
    Начален час на приложението с грешки: 0x01cecce1422934eb
    Път на приложението с грешки: C:\Program Files (x86)\Skype\Phone\Skype.exe
    Път на модула с грешки: C:\WINDOWS\SYSTEM32\msvcrt.dll
    ИД на доклад: 82479583-38d4-11e3-be8b-08edb9eeea50
    Пълно име на пакета с грешка:
    ИД на свързаното с пакета с грешка приложение:
    There are several other reports with the same error message (Faulting module: msvcrt.dll):
    http://community.skype.com/t5/Windows-desktop-client/Skype-for-Desktop-stops-working-when-trying-to-...
    http://community.skype.com/t5/Windows-desktop-client/skype-not-working/m-p/2013329/highlight/true#M1...
    http://community.skype.com/t5/Windows-desktop-client/Skype-desktop-windows-8-1/m-p/2016887#M195292
    http://community.skype.com/t5/Windows-desktop-client/Skype-crashes-on-Windows-8-1-Professional/m-p/1...
    http://community.skype.com/t5/Windows-desktop-client/Skype-has-stopped-working/m-p/2019771#M195359
    The solution seems to be to install .NET framework 3.5 from add windows features.
    http://community.skype.com/t5/Windows-desktop-client/Skype-crashes-on-Windows-8-1-Professional/m-p/1...
    http://msdn.microsoft.com/en-us/library/hh506443.aspx

  • Microphone problem with POE 13

    m@y microphone works with windows 8.1 but Premier Elements 13 will not recognize my "Realtech High Def Audio device.Any suggestion?

    coo-gar
    Premiere Elements 13 on Windows 8.1 64 bit.
    Have you updated your Premiere Elements 13 to 13.1 using an opened projects Help Menu/Updates? If not, please do so.
    What type of microphone do you have? Classically, USB microphones do not work with the Premiere Elements (many versions) Narration Tool. However, there are scattered reports where the user claims to have used a certain brand of USB microphone successfully with Premiere Elements Narration Tool. Often the ReadMe files would mention this situation. Although I do not see that mention in the Premiere Elements 13 ReadMe, that does not mean that the problem does not still exist.
    One workaround, if no alternative, is to create the narrations in a free program such as Audacity, and then import the narration (wav) saved to the computer hard drive into your Premiere Elements product with its Add Media/Files and Folders.
    Please review and consider and give more details.
    Thank you.
    ATR

  • Microphone problem with my Inspiron 3521

    Hi,
    I have purchased a laptop Dell Inspiron 15 3521 Tag Number<ADMIN NOTE: Service tag removed as per privacy policy>. It is to inform you that there is a problem with Microphone. The output of the microphone is very low and blurry. I have done all my best to solve the problem but all in vain. 
    You are requested to please help me in this regards.
    Regards,
    Muhammad Umar

    Muhammad umar
    You are requested to please help me in this regards.
    Hello Muhammad Umar. This forum is for Dell owners to have a place where we can discuss technical issues with each other. If you are attempting to address a Dell representative, I urge you to contact Dell directly.
    My own advice to you is to first re-install your Realtek audio driver from the Inspiron 3521 downloads page (make sure to select your operating system in the drop down menu).
    If the problem remains, next install the native Windows audio driver. If that also does not fix the problem then you probably have hardware failure of the mic. In that case you should contact tech support (using the above link) and schedule a repair as per your warranty.

  • Continual Problems with Skype-to-Skype calls TO Sw...

    Let's see if the Skype Customer Service will respond to this inquiry in a manner which indicates that they have completely read and understood the situation which I am about to explain.
    Over the past 8 years, I have been regularly using Skype to call family in Switzerland. That's Skype-to-Skype, not Skype-to-phone. I have either used a modern Macintosh (OS 10.6.8, using Skype 6.15) or most recently an iPhone5 (OS 8.1.3) and the downloaded Skype App. The person with whom I have been speaking in Switzerland has been using either a modern Windows PC or iPhone5.
    Each time, I can't call them, and the person over there must first call me.
    Each time, I can transmit a live picture to them, but I can not receive their picture.
    Oh, yes, I just tried to message Skype Customer Service about this issue, and received the following message: “500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed.”

    Customer service has received your request and working on it.
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Maybe you are looking for

  • Got new computer with windows 8.1 and installed latest itunes and hooked up nano 5th gen ipod to update music librarie but wont sync what would problem be?

    Got new computer with windows 8.1 and installed latest itunes, went to update music library on my nano 5th gen and plugged in recognized in my library but when it synced , it said sync was complete but did not update at all, then reset the ipod to fa

  • Crystal reports server XI release 2 installation problem

    Hello, everybody, got 2 of crystal reports server XI release 2 packages back in 2006 since then only crystal reports designer were used (great software) and it works fine. but now trying install the server version included in the package, installatio

  • Significance of service-profile property?

    Hi all,       i would like to know the significance of profile property of a portal service? The service that I created in NWDS doesn't show up in <b>service configuration</b> of portal , if there's no service-profile property in my portalapp.xml. I

  • Importing Quicktime with Flash codec

    I wanted to put a Flash cartoon I made into my iMovie, so I published into Quicktime. It worked fine when I opened it in Quicktime but when I try to import it into iMovie the import progress bar flashes briefly then dissapears then after that nothing

  • Inspection characteristics

    hi all, i want to identify quality and quantity index for transaction ia03 (equipment task) i want to know where its stored in which field and table, STEUERKZ its field for control indicator (Cntrl Indicator String for Insp. Char./Master Insp. Char.)