Microphone Trouble with X-FI Titanium Fatal1ty Pro

I just cannot get my mic to work anymore, even when it did it was muffled and sounded awful, I have installed and re installed everything I can think of. Any suggestions?

Can anyone help me?

Similar Messages

T6100 with X-FI Titanium Fatal1ty Pro and Windows 7 x64

7T600 with X-FI Titanium Fatalty Pro and Windows 7 x64 Hello,
Please forgive me my bad laungage. Im writting this Post because i want to ensure i wont have any problem using configuration as i wrote in topic. So, are there any drivers for Windows 7 x64 (PL, Home Premium) for my sound card. Can i also use Creative Alchemy tool on Windows 7 x64. And do i need to use Alchemy on Windows 7, to gain EAX in games too? Can i also download and use PowerDVD with is deli'vered with the drivers? And what with Dolby Digital Li've? Is there a problem with activating and using it on Windows 7? And last question: Can i gain a 5. sound with my Creative Inspire T600 sound system and use it in game, and music listening?without any trouble?
I wish to apologize for that many?questions but this is very important to me. So can i use it all, and can i install it from my X-FI?Titanium?Install CD, or do i have to download it from Creative site?
Thank you very much for answer!
Thunderbolt (my real name is too hard for foreigners) ^^

Please refer to my reply on your post under Windows 7.

No MediaSource Go! with X-Fi Titanium Fatal1ty Pro Series?

I recently picked up a new X-Fi Titanium Fatalty Pro Series card; which replaced my older X-Fi Platinum, that sadly stopped working.
Anyway I noticed that, this newer Titanium card came with a newer version of the Creative MediaSource software; called MediaSource 5.
However, it does not include the launching application, MediaSource Go! which is the launcher bar that loads on startup. With my X-Fi Plat, when I hover my mouse over the top edge of my screen the MediaSource Go! launcher bar drops into view and I can just click on the icon of any Creative application that I have on that bar, to launch that application.
I liked that very much.
So I am curious, why is this not included with the newer MediaSource that comes with the X-Fi Titanium Fatalty Pro? I would very much love to have it!

@. Re: No MediaSource Go! with X-Fi Titanium Fatalty Pro Series? I have a similar issue. I am having a problem with speaker calibration which strated several months ago after updating some Creative files. Today I uninstalled all Creative apps and driver pack and reinstalled the latest versions. Doing this I lost my Mediasource Go! bar. So I downloaded it and when I tried to install it I got a message saying? I did not have the "minimum" version of MediaSource and that it would now quit. However, when I had Go! before I also had Mediasource5; in fact the Start Menu shortcut for Go! (which is now a broken link since Go was removed) showed it was in the Mediasource5 directory. So why won't Mediasource Go! install with Mediasource5 installed? I thought the "minimum" version of Mediasource required for Go! was 3.00.6.

Poll: Who is having no sound issues with X-Fi Titanium Fatal1ty Pro?

Several weeks ago I purchased an? X-Fi Titanium Fatalty Pro. I have the latest drivers/software installed for all of my hardware and am using Windows 7 64-bit ultimate. There is no sound when the computer resumes from Standby or hibernate. I have to disable the driver in the device manager and then re-enable to restore sound. It seems the X-fi driver is not initializing when the computer resumes from these states. Problem does not occur during a normal cold start or restart.
i have an open ticket with creative support and need to find out if others are having the same issue on windows 7. Several folks having the same issue at this link with little to no success at fixing. I don't know if this is a driver thing, an IRC conflict or what. I have no had this issue on the same hardware with any other sound cards I've I had, to include an HT Omega card and the onboard sound; which leaves me convinced it is something with the X-fi card.
Please respond to this posting if you are having the same issue. If you have found a way to fix it, please say so as the creative support folks are still investigating and have asked me to give them more examples.

Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates.

Using back SPDIF Motherboards outputs with X-Fi Titanium Fatal1ty Pro Series

I have an Asus Rampage Formula that comes with Digital Coaxial and Toslink outputs and a PCI-E sound card, Supreme FX II.
I was able to use both back SPDIF outputs with out any cable, you the card in the PCI-E slot, but I have change my card with a X-Fi Titanium Fatalty Pro Series, no im not able to use any of those outlets, im used the the Coax to my Home theater and the Toslink to me headphones.
Now I can only use the Toslink of the digital output of the X-Fi with my headphones but im not able to use the ports of the mobo to my home theater, is there a way I can use them? the card doesnt have a Coaxial output and thats the problem.
Also, my mobo has 4 pin SPDIF output port, so you can connect something there, but it seems that there are any cable from the output port of the mobo to the audio card....
I found this but Im thinking it might not work...
http://cgi.ebay.com/ASUS-COMPUTER-MB-ACCESSORY-SPDIF-OUT-COA-OPT-4pin-SPDIF_W0QQitemZ3504993780QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item3504993780&_trksid=p3286.c0. m4&_trkparms=72%3A234%7C66%3A2%7C65%3A2%7C39%3A%7C 240%3A38%7C30%3A%7C293%3A%7C294%3A50?
Any help will be really appreciated!
Thank You!?

Any [email protected]

Sound lag with X-Fi Titanium Fatal1ty Pro Seri

Hello to you all,
I just built a new computer and the problem I have is that sound lags with WMCE in Vista. My video card is ATI 4850 (52mb) and motherboard is 790gx. The internal sound and integrated video are both disabbled. Any suggestions as to fix the sound lag while watching TV on Media Center? I have no problems with music or games with this. Thanks to all.

Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates.

MSI x58 PRO-E SLI+Creative X-Fi Titanium Fatal1ty Pro

Im thinking of buying a Creative X-Fi Titanium Fatal1ty Pro for some better sound, problem is that I cant see if this is gonna fit in the top PCI-E slot because of the cooling block there.
Does anyone know if this will fit or not?
here is a pic of my current setup:
http://twitpic.com/1zvxnz

You asked if it would fit the other slot and I said it would, if the heatsink does in fact prevent you from using that slot then you can use any other available PCIe slot. A 1x PCIe card will work in any PCIe slot no matter what size the slot is.
I took a look at the pictures shot from an angle at MSI website and it does look as if it may not fit there. I also noticed that on the 1156 MB that the same HS on them have very short fins in line with that slot, makes me wonder why the 1366 MB HS is not like that.
I assume you don't have or can't borrow a card from family or friend to just test for fit in that slot?

Gigaworks S750 cables for the X-Fi Titanium Fatal1ty Pro Card?

Hey guys,
I got a nice Gigaworks S750 7.1 speaker system and want to use it with my new X-Fi Titanium Fatal1ty Pro card. The Fatal1ty pro has analog outputs for a 7.1 sound system, but the Gigaworks doesn't have the same layout. Can anyone help me find the cables I need to get this setup running?

Hi,
There are 4 Line Outs on the X-Fi Titanium Fatal1ty Pro card.
Line Out 1 jack - Connects to the Front Left and Front Right inputs
Line Out 2 jack - Connects to the Side Left and Side Right inputs
Line Out 3 jack - Connects to the Front Center and Subwoofer inputs
Line Out 4 jack - Connects to the Rear Left and Rear Right inputs
You might want to refer to the user manual of the sound card and speakers system for more information.
You can still utilize the suppiled 7.1 cable. Just leave out the grey connector (side speakers) and use a single 3.5mm cable to hook up both ends.

Titanium Fatal1ty Pro product numbers?

I've discovered this, and I am honestly quite confused.
On Creative's official store, the Titanium Fatal1ty Pro has the SKU 70SB088600002 . Looking at my own local stores, I see a very similar code (70SB088600000), where the only difference is the last digit being 0 instead of 2. That's not all though. Some retailers also have the quite different code of 30SB088600000 . That's three SKUs, apparently for the same product. Nothing indicates that either is the champion edition (the package including a front bay). Do these differ somehow?

You can use the product page on the online store as a reference to make sure that you are not missing anything. If you are buying from an online reseller, you might want to sure they are authorised & trustworthy retailers.

P7800 7.1 speakers on X-Fi Titanium Fatal1ty Pro - Confirmation.

Hi Everyone.
I just bought a X-Fi Titanium Fatalty Pro (It's better late than never, right? LOL), and I'd like to confirm with you guys what I researched.
I found around that X-Fi Titanium Fatalty Pro will recognize my oldie analog P7800, I only need to connect the speaker audio cable to the three Line-Out(green-Lineout6, black-Lineout3, orange-Lineout4) on the soundcard, and my 7.1 speakers will work fine.
Is this correct?. Can anyone confirm this please, or should I need to buy new rca cables for this?.
Thanks for every input guys.
Message Edited by gscualo on 02-15-2009 06:06 PM

Same problem here as well i have everything set to 00% volume and never had this problem until windows 7 now i have no volume at all period enless i go 5% or higher with volume control and alot of things are too loud even at 5% and i wish i could just put it at -4%.
Worked fine on XP , It seems to be the x-fi cards are just a cluster fk when it comes to windows 7 i have had nothing but trouble with my card since i installed windows 7 and enless creative gets o nthe ball and fixes these issue i won't be buying anymore of there cards i have always stuck with creative thru the years but it seems ALOT of the threads on this forum are issue related to windows 7 and x-fi cards with issue dating back to oct 09 and still no fixes released or even a reply from creative team at all as to whats goin on. Everyone is just being left in the dark from what i been reading and getting no answers and i think for how much the cards cost especially when they were new and more expensi've people should be able to use there cards and not wait 6 mnths for a fix or even a fix at all for that matter.
I am just glad i only have a 4. system right now because reading the forums it seems anything?5. or higher?isn't working right either on windows 7 and hasn't been working right since last year and still no fix for it yet and alot of people are getting very angry they are stuck using 2. with there 6. sound systems.

HDMI connection through PCI Express X-Fi Titanium Fatal1ty Pro Series and Nvidia GTX 2951

Hello,
I want to connect HDMI connection through PCI Express X-Fi Titanium Fatalty Pro Series and Nvidia GTX 295\but i cant tell which of the pins on the Audio Card is the Spdif.

CRe: Mic not working (PCI Express X-Fi Titanium Fatalty Pro Series)? Hello,
Thanks for the reply.
The headset is connected via the 3.5mm jacks in the card.
I believe I have it working now. I ended up having to unstall the drivers and software, reboot, install drivers and software and then mess with the settings. The only issues that I am having now is that I hear a a really high sort of feedback/hiss tone from the headphones now. To correct this I have to turn the input for the microphone down really low within the Windows 7 controls for the microphone and turn it up with Ventrilo to get the mic to work and remove the feedback/hiss.
I believe that the issue stems from the flexjack setting. The whole flexjack thing really seems to mess with the microphone settings. I believe I choose line-in instead of microphone.
Once I get home tonight from work, I will hopefully post the exact settings I came up with to get the mic to work.

Beta driver for Titanium Fatal1ty Pro and windows 7 64 bit

I see there are beta drivers on the website for the X-Fi Titanium Fatalty Pro on Windows 7 64 bit.
The drivers are dated June 23, 200.
Are there any known problems with this set of drivers?

Now I can't find those beta drivers on the website anymore.
Did support take them down?
And do the current drivers dated: july 30, 2009 cause the shutdown bug in win 7 64 bit's

Titanium Fatal1ty Pro SPDIF game problem

(Titanium Fatalty Pro SPDIF game problem hi all,
sorry if this issue reported in the past i but i could not get any answer on any relati've posts, the terminology was so complicated
i buy?a new pc with a Titanium Fatalty Pro sound card, i use Vista sp2 x64, the sound card is connected to my external amplifier with SPDIF out in order to get surround sound for my movies and my games and here is my problem
any movies format with surround sound play perfect with out any problem any kind of movie DVD, dvix, mkv?files?etc
but non of the games i play?use the surround system, why is that? is any?kind of special settings needed to be done? how is possible to get surround to movies and not to the games?
thanks you all for your time ?

,Re: Titanium Fatalty Pro SPDIF game problem? this is really coincidence - I just posted on the very same topic 5 minutes ago.
for games just go to the Console Entertainment mode > Encoder > Dolby Digital. Although this is not documented I believe what happens is that the sound card encodes the 6 digital channels onto Dolby Digital mode and transfers this over SPDIF. Kok-Choy actually recommend using the standard analogue cables (and he has a point as you are actually upcoding an existing game signal onto Dolby so that your digital receiver can then decode this down to 6 channels - seems a pretty useless overhead)
for video - I am curious to know what you do - I can either get 96/24 bits on the display of my z5500 with a direct signal but the z5500 receiver then tells me that this signal is only in dolby ProLogic II (and not DD or DTS). As alternati've I use again the encoder and have to select for EACH FILM WHAT IS BEST DOLBY DIGITAL OR DTS. Pls explain what settings you use.
thanks

Trouble with printing tone from Efex Pro to printer from Lightroom

I am having big trouble with a photo that was toned in Silver Efex Pro 2. When I print, the tone is not there. I have done the same kind of toning before, but never had this problem. I even tried printing a photo that had a lot of tone... not there when I print. I am pretty sure I have all the setting correct. Printing with Epson 2880, Epson Hot Press Bright, Profile for HPB, etc.
After 6 hours (really) with Epson and Adobe, the problem is not solved.
Help!
Laure

Hi bannyx,
I hate to hear you are having issues. Does the printer have a valid IP address when connected via Ethernet or wirelessly? Click Here for steps to take related to this issue. Please see the below information regarding the connection types for this printer. Also I need a bit more information to proceed if the above link does not resolve the issue.
Needed information:
1. Has the installation been completed from a disk or download?
2. Did the installation software detect the networked printer?
2. What is the IP of the printer when connected with Ethernet cable?
3. Are you able to access the embedded web server for the printer (type IP into address bar of web browser, does printer web page pull)?
4. Do you have security software running on the computer?
5. Is the router running in mixed mode?
Connection information:
1. Ethernet and wireless connectivity are exclusive. If the device is hard wired with an Ethernet cable, wireless communication is voided (radio disabled) because the printer is networked with a cable.
2. Disconnecting the USB cable puts the driver in an offline state due to the fact it cannot communicate with the printer. This is normal; it basically informs the user the device is not communicating.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Trying to use SPDIF BYPASS with X-Fi Titanium Fatal1ty

I need help guys!! I've bought a Creative X-Fi Titanium Fatalty Pro PCI-E x a few days ago and everything is working great with the lastest drivers (even DTS Connect, Interacti've, DDL, etc... Everything is fine) but now i want to use the digital input to "bypass" the audio from my SKY HDTV (Home Theater Samsung X-70 digital input, hdmi input and hdmi output) and i've done everything and i can't hear anything... SKY HDTV - > X-FI Titanium Digital Input - > X-Fi Titanium Digital Output -> Samsung HT-X70
I have the SKY HDTV plugged into my Sound card via Toslink Digital Optical cable.
I had done some research online about needing to enable the decoder in the Creative Audio Control Panel, but I have no "Decoder" Tab. Also, there is a tab called SPDIF I/O when I select it, SPDIF input settings are grayed out and in the box is default (pre-selected).
Is there a fix to get a decoder for this sound card, or what should i do?
System config
Core 2 Duo E8400 @ 3.6Ghz
Gigabyte GA-EP43-DS3L
2x2GB Corsair Dominator DDR2 066Mhz
Sapphire HD4890 GB GDDR5 VaporX
Creative X-Fi TItanium Fatalty Pro Series PCI-Ex
Corsair 450VX
Samsung 40" LCD LN40A550 - 920x080@60Hz
Samsung HT X-70
Windows 7 X64 RTM

OK Helsing, let me see if I understand you, If you want to decode DD and DTS, PowerDVD will do the trick, but so will VLCMedia player, etc. If you want to send a pure untouched signal through to your receiver so it can decode it and play it, then that is SPDIF passthrough. That means the signal will go through your system untouched and out to your receiver........and yes there is that setting for it in the SHARK codec package. Shark's package will also use FFDshow or whatever of its components to do the job of which you are speaking.....
http://shark007.net/forum/Thread-problem-spdif-passthrough-x-fi-decoder-Win7

Microphone Trouble with X-FI Titanium Fatal1ty Pro

Similar Messages

Maybe you are looking for