Microphone very quiet even when fully turned up. speakers ok. hp g6000 notebook with windows 7
Have tried loading new driver but I am advised that I already have the latest driver for conexant High Definition SmartAudio 221.
Have also tried downloading sp.30399 but the problem persists,
I am the second owner of the machine but believe it originally ran under windows Vista when the built in microphone worked well and that it stopped working when he upgraded to windows 7.
Can anyone help please?
BSOD's are never good. They point to a problem much bigger and deeper than any software issues.
When XP came out eleven years ago, people were astonished at how much processor it took to handle the GUI vs Windows 98. Processors an RAM have upgraded a lot since then. It was worse with VIsta, even on newer systems. Seven was a step in the right direction, but I'd guess that your old computer (your words, not mine) isn't up to the task of running Windows 7.
Similar Messages
-
my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?
Hello dreuer
Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Regards,
-Norm G. -
My iPad takes hours to charge even when I turn it off I have bought like 6 chargers and my iPads been sent back twice and it still doesn't work when I'm charging it what do I do ??
I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times. -
Does keeping a macbook pro plugged in even when fully charged damage the battery in any way?
Does keeping a macbook pro plugged in even when fully charged damage the battery?
no it will not, your battery stops charging when it reaches 100%. you can verify this if you'd like to through system report - power.
once in a while however, it's best to use it under it's own power and charge it back up once it's down to 75% to keep the battery in optimal condition. -
My ipod keeps shutting off randomly even when fully charged
The past few weeks my ipod will not stay on even when fully charged. i already restored it and put the setting back to the original settings and it hasnt helped. any other suggestions?
Hi yanksfancvh,
Thanks for visiting Apple Support Communities.
If your iPod is not staying powered on and you have already restored it to factory settings, it likely needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Best,
Jeremy -
The light on the back of my iphone 4s will not turn off. Even when I turn the phone off the light stays on. Can someone help? I did notice that the camera on the back has a little bit of moisture. (I have 3 small kids).
You will need to have the hold switch replaced.
-
When instant streaming Netflix on my Macbook Pro, the sound is very very low even when sound controls are set at highest level. I do not have this problem when listening to TV or watching movies streamed from DishNetwork. I contacted Netflix and they had me install a newer version of their software Silverlight... this did nothing to resolve the issue. They were not familiar with the issue.
Well if your on 10.6.2, you need to software update to 10.6.8
Perhaps you need to adjust the Silverlight (Microsoft DRM video plug-in) sound level itself too
Run a check here to see if your current on your Silverlight (works for all browsers)
https://www.mozilla.org/en-US/plugincheck/
Use another browser like Firefox and see if it continues.
Try another video file. They all have their own sound levels too. -
Have brand new iphone 4s. Wifi signal is very weak even when very close to router. I have also an iPod Touch and when both are side by side, the iPod wifi signal is excellent and the iPhone wifi signal is very poor??!!! Hardware issue? or software issue? I was hoping it is just a software issue, but...
Saw may web sites discussing this same issue; many discussions point to hardware problems but there is no official word from Apple about it, which is disapointing !?? Few discussions point to software problem with solutions based on try and error, and they don't seem to work.did not help at all; the problem continues the same
-
all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all.aince updating to I.O.S7.0.2???
What should i do currently have it on charge for several hours not done a thing and have been locking and unlocking and resettingPlease see: http://support.apple.com/kb/HT1808 for further info. It sounds like you are already in Recovery mode so if the image in Step 4 is the one you see, skip to Step 5.
Regards,
Steve -
When I turn on my iMac it comes up with the login icons which I then choose and log into. The password works and I then get the apple icon and the spinning wheel. After about a minute the Apple icon turns into a prohibited icon. However, if I log in under the guest icon, I can access the wifi and get to Safari. I really don't know what to do next. Any help would be gratefully appreciated.
Are you running any A-V? If it's an iMac 21.5, I don't think you're running Leopard, 10.5. Probably at least Snow Leopard, 10.6. This is the Leopard forum.
This article says meant for 10.3.9 and eariler, but contains some still useful suggestions.
http://support.apple.com/kb/TS1411
Try a Safe Boot. Shift at the startup chime and expect a much longer time to boot. This will bring you to a login screen with "Safe Boot" in red.
Look at this as well.
http://support.apple.com/kb/TS1417 -
Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.
Not a solution yet, but received the following from one of the tech people I've been e-mailing back & forth with.
"I'm sorry that you have been unable to submit your podcast. The podcast submission form is currently offline. When trying to submit the podcast you will receive this message "We are Currently Experienced Technical Difficulties". Once the issue has been resolved, I would be glad to inform you.
Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available."
Who knows, maybe the problem isn't with my feed after all. -
I've got a 15" white macbook which I bought about 2 years ago. It froze the other day and wouldn't respond so I shut it down. When I turn it on now it comes up with a flashing file with a question mark on it. How can I fix it? I've tried a few things i've seen online but the futhest ive got is to put the start up disk in when you makes it go to a grey screen with an apple logo and the spinning wheel which then stops spinning. Can anybody help?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once.It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left handlist. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
When I turn off the phone, the screen flashes with sony logo. any solution?
Hi,
when I turn off the phone, the screen flashes with sony logo. any solution?repair your phone with
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
What does it means when you turn on the macbook and a file with a "?" mark flashes?
What does it means when you turn on the macbook and a file with a "?" mark flashes?
It usually means some system files are missing or corrupted. Reinstalling OS X is the fix:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
I can turn off the device naturally. But when i turn it on it shows all white with black lines and different colors. Is my LCD screen broken? If it is, can apple fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If not covered by warranty
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price
Maybe you are looking for
-
Problem with QOS for SIP on RV082
Hello, I have problem with quality of VOIP call with Linskys RV082. Firmware is 2.0.0.19tm. Router is configured as dual-wan , one port (WAN2) is for ADSL 8000/512kb and other one is (WAN1) SHDSL 8000/8000kb. VOIP traffic from certain IP of LAN is r
-
Why can I not access internet files in mail. I get a "plug in failure" message.
Why can I not access internet files in mail. I get a "plug in failure" message.
-
Hi, I'm new to the PD side of HR. I've been following documentation to create the appraisal catalog and so forth. However, I cannot create an appraisal template. I've searched the help.sap.com for it and to no avail. Can someone tell me how to creat
-
Weblogic portal Integration with UCM by weblogic virtual repository
Anyone has experience with Weblogic portal Integration with UCM by weblogic virtual repository? Thanks.
-
1:M Relationship - No Foreign Key is set
Hello, I got a problem with 1:M relationships. The data I send is inserted without problems but the foreign key column is never set (null). Its very strange cause the reading works fine. The Structur: got 2 tables ... Parent_tab and Child_tab. I got