Microphoto freezing at logo, and recovery options don't w

Hey guys, a couple weeks ago in school I dropped my Zen photo and ever since then it'll freeze at the logo. The only way I can get the logo to go away is by plugging it in the wall, to charge it, then turn it on while it's charging. This brings me to the recovery screen. Whenever I select an option, it'll stay in the act of w/e option I selected indefinitely and its pissing me off. Any one with the same problem? How much is it to send my Creative in for repairs?

It's sort of like a computer when the hard dri've dies- you can get to the BIOS screen [the Zen/Recovery screen], but not much farther before it hangs. Dropping hard dri'ves is usually bad for them, unfortunately, it's probably damaged.
If running Disk Clean Up, Formatting & Reload Firmware don't work, the hard dri've is likely damaged by the fall.

Similar Messages

  • My iphone 4 freeze @ apple logo and dont start up..what should i do to solve this problem???

    my iphone 4 freeze @ apple logo and dont start up..what should i do to solve this problem???

    Trying restoring your iPhone, take a look at this link, http://support.apple.com/kb/HT1414

  • Certificate Widget, logo and signature options

    Hi there,
    I am using CP7 and inserted a certificate widget. From the options, I selected a logo and a signature file. Once published and played, the logo was incredibly small and the signature was hugely displayed across the top. (see pic)
    I played around with resizing both logo and signature files but this didn't resolve the issue.
    Here are the widget properties.
    Any thoughts?

    Where'd you get the certificate widget from? The provider would likely be the best to answer...
    Otherwise, my only thought is the 'resolution' of the image. What's the DPI for both? '72' is a good general number. If the signature is, say, 300dpi that may be why its so large...

  • , The screen shows quicktime logo and despite pressing done it is not reverting back

    My Itunes app is stuck on my phone after accessing a podacast. i am unable to get out of it. The screen shows quicktime logo and despite pressing on the done button nothing happens. I can close the Itunes app, but the minute I access it get the same podcast menu.

    Place the device in DFU mode then restore it.

  • Urgent!!!!!! Mac os  and recovery option not available in boot option

    Hello all,
    I installed windows 8 pro in my Mac using boot camp. It worked fine. I made my boot priority to windows. Then one day I shrinked my windows partition drive to another drive. Then I extended back to normal. But when I restated my pc, it won't load to windows. And when I press the option key, only "windows"partition appear. No "Mac os " no "recovery" only "windows" option. I tried to open terminal using command+s but no luck how can I boot to Mac?
    Waiting for it to be solved..
    Thanks

    You can't do that, Re-Partition the drive, Shrink/Expand, or anything after you install Windows. you have FUBARed the complete system.
    You'll need to boot to the Online Internet Recovery system. At startup hold down the Command+r keys until you see a spinning globe in the center of the screen, have the system WIRED to your internet Router, Ethernet cable.
    If the Command+r keys don't work try Command+Option/Alt+r keys. Again hold them down until you see a spinning globe in the center of the screen.
    Form that you will need to Re-Partition the drive as ONE (1) Partition and then reinstall Mac OS X. Once that is done then you will need to Reinstall Windows and then all your programs for both OSs and hopefully you have a backup of all your data files.'
    Good Luck and Best Wishes. Happy Holiday and Happy Festivus for the rest of us.

  • Quality and Media options don't appear in Print Dialogue Box

    I recently upgraded my OS and now when I try to print on either my Lexmark Z65 or my Epson R300 (both USB connections), I don't see the "Quality & Media" option in the print dialogue box.
    I need these settings to appear so I can choose Glossy Photo Paper. This is the only setting that will give me the saturated prints that I need for my projects.
    I have tried:
    - reinstalling the latest drivers for each printer
    - deleting and then re-adding the Printers
    - restarting
    I've been reading that others are having similar problems when they upgraded to Tiger, but none of the posted solutions seem to work for me. Any ideas?
    Thanks,
    Jen

    Options such as Quality & Media are known as PDEs (Print Dialog Extensions) and they are added to the standard print dialog by the driver installer. For the new Intel Mac's, to get these extensions to appear (or appear without a line through them) you need to have a driver that is written in Universal Binary.
    You mentioned that you have the latest drivers. Check back to the web site to see if they mention them being Universal Binary versions. If they are Universal, then the previous drivers that were PPC may be interferring with the UB version. Try opening the Printer Setup Utility, click on the title menu and select Reset Printing System. Then close the Printer Setup Utility and open Finder. Navigate to /Library/Printers/ and delete the contents of the Epson and Lexmark folders. Empty the Trash, restart the Mac and try adding the new drivers again.
    If there aren't any Universal Binary versions available, then you can set most applications you are printing from to open using Rosetta. Before opening the application, find its location in the Finder view and go a Get Info on the icon. In the Info window, if there is a setting 'Open using Rosetta', then enable it and open the application. Now you should have the option.

  • Vista Rescue and Recovery discs don't work

    I have a T61 (7659-D22) that came with Vista Business preinstalled. I made (and verified) a set of R&R discs, then used a set of WinXP discs supplied by Lenovo to install XPPro.
    Now I am trying to use the Vista discs I made to install on a brand-new drive in the same machine, but after I select "Restore my machine to its factory state" (or whatever the actual wording is), I just get the hourglass thing "for ever" with no evidence of disc access.
    Any suggestions?

    I wrote:
    I do have a backup of the R&R partition -- created with Macrium Reflect -- but the special MBR needs to be present for F11 to work. The only means of repairing the MBR seems to involve the use of a floppy, but of course this machine does not have a floppy drive.
    I restored the Recovery partition (created with Macrium Reflect) and marked it Active. Although F11 still did not work, the machine rebooted into the R&R partition anyway and gave me the option of formatting only Drive C:. The only very minor glitch was that when it rebooted it booted into the R&R partition again rather than into C:, and I had to use Partition Wizard to mark C: as the active partition. It then booted into C: and went on its merry way configuring Windows Vista.
    Maybe I can then recreate a usable R&R Startup CD -- but maybe it doesn't matter as long as I can preserve the image of the Recovery partition somewhere -- on a DL DVD-R perhaps.

  • BSOD leads to disk corruption and recovery options....

    After getting a BSOD (IRQ less than or equal to) this morning, I can't even boot up the Windows installation media (Windows 8 PRO) to get to a command prompt! 
    After pressing any key to boot to the DVD (and the DVD spins, etc) and a few minutes it comes to a 'Recovery' screen with  "Your PC needs to be repaired"
    Giving that it can't find winload.exe.  Well no kidding, there's a reason I booted from DVD after all.  I don't need you to tell me that.
    Then it gives the gem that I'll need to use the recovery tools on my installation media.... Of course I BOOTED from the installation media...but that's beside the point. 
    Then I get to Enter to try again, or F8 to get to the menu to boot the OS.  It's as though the OS from the corrupt disk is overriding the Install media even though it's disabled as a boot device in the BIOS and the only boot device I have is the Blu-Ray
    Drive.
    MS, you REALLY need to fix this OS.  This is the 5th time I'm going to have take this disk to another PC, wipe it completely and start from scratch.  A BSOD I can get over.  The MASSIVE and I mean massive corruption that results from one on
    the local disk is getting unacceptable.  I've used every version of your OS sing 3.1 and Windows NT 3.5 didn't even give me this much trouble.
    Any suggestions on how I can at least get to the recovery tools on my install media?

    Hi,
    You can try this guide to download Windows 8.1 image:
    http://www.cnet.com/how-to/how-to-download-the-official-microsoft-windows-8-1-iso/
    Then, make a bootable USB to perform system repair.
    http://pcsupport.about.com/od/windows-8/a/install-windows-8-usb.htm

  • MBP Retina Freeze after migration and no option for Reinstall

    Hello,
    just want to inform you, I have just maked the migration to my new MBP retina and have a problem that it will freeze only option is to boot in safe mode.
    Have deinstalled apps which could be the problem such as Paralles desktop, Symantec Endtime protection, SMC Fan... still have the problem with all users.
    Deleted the Startubitems, launchagents and deamons still the same problem.
    So I wanted to make a complete reinstalltion and here is the problem the apple server do not let me make the reinstallation.
    This version of Mac OS x 10.7 cannot be installed on this computer
    Answer for the support they have to get in contact with the Itunes department this can take 2 days. So I can only enjoy my mbp in safe mode.
    Kann someone help me to fix the freesing after the migration?

    I can try that but I am afraid that I do than not even have the safe mode any more. Will spend 1-2 more hours to fix the problem, because after the reinstallation I will do the same migration and may end at the same situation.
    So better try to fix it.
    Fix the spotlight index crash and know have a new one I386_pmGetDeadline: Null pointer.
    This have to do with the power management. Will try that and than let us see.

  • Click tools, options and my options don't show. Why

    Firefox 35.0.1.
    When I chick Tools, Options, I get the popup window but it's blank. What happened?

    Type '''about:preferences'''<enter> in the address bar.
    Hello,
    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Thank you!

  • Issue with backup and recovery of WLS

    I have installed WLS 10.3.6 in my 64-bit Linux box, now I am trying to take backup my server. I have a web-application deployed to my WLS, the path to my war file was something like:
    <home_dir>/install_files/myapp.war
    Now to take backup I ran tar command on my current Linux box, now I copied the .tar files to my new Linux box and extracted it. When I am starting my weblogic server it is looking for the war file from the path <home_dir>/install/myapp.war which does not exist on my new machine. So I logged into Admin console of WLS on my new machine and trying to change the path for myapp.war by clikcing update button. But I am getting this error when I change the path:
    weblogic.management.ManagementException: [Deployer:149007]New source location, '/u01/Oracle/install_files/myapp.war', cannot be deployed to configured application, 'myapp'. The application source is at '<home_dir>/myapp.war'. Changing the source location is not allowed for a previously attempted deployment. Try deploying without specifying the source.
    Update operation failed - no deployments changed.
    Please help me how to deploy my files. I'm expecting backup and recovery option should also take care of deployed files but it is not happening in my case, is that wrong?

    1. There is no specific order, but last to go down should be CMS and first to come up should be CMS.
    @echo off
    Stop Business Objects Services
    echo
    net stop "BOBJCrystalReportApplicationServer"
    net stop "BOBJEventServer"
    net stop "BOBJProgramServer"
    net stop "BOBJOutputFileServer"
    net stop "BOBJProcessServer"
    net stop "BOBJInputFileServer"
    net stop "BOBJDestinationServer"
    net stop "BOBJCrystalReportspageserver"
    net stop "BOBJJobServer_Report"
    net stop "BOBJCentralMS"
    exit
    Similarly to Start services, instead of stop use start and put CentralMS at the top and save it as a batch file.
    2. Jobs running when the server goes down will fail, other recurring jobs will wait till the server comes up.
    3. Yes, backup File Store & Database.
    4. Not sure about the default password for My SQL, you should be able to backup the MySQL database, I have done that once.
    5. Backup FileStore & Database.

  • I'm trying to install the latest OS update and it is "stuck" - logo and half the bar is displayed

    I am trying to install the latest OS update and it is "stuck"  - display shows logo and bar half done...

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Vista DVD and Recovery CD's

    My father (aged in his 70's) has just purchased a Lenovo 3000 series desktop.  It seems a good machine but it was supplied with no Vista DVD.  I tried to create a Recovery disc for him, but when you follow the customer care help it tells you to go to a particular menu screen and select the Create Rescue & Recovery Disc option, however this menu option is not there and there is nothing that sounds like it will do this task in any of the sub-menu's.  So, the first questions is how do we create a recovery disc for the computer?
    Secondly, I'm concerned about the absence of a Vista DVD.  What if, for example, his hard drive dies after the computer is out of warranty and he has to buy a new one?  How does he install his licensed copy of Vista on the replacement hard drive if he doesn't have the DVD?  I don't understand how you can purchase a license and not receive a copy of the software that goes with it.

    There is no LenovoCare menu but there is a LenovoCare Tools option in the Welcome Centre.  Under that menu there is no option for "Create Recovery Media".  Under LenovoCare Tools there is a Data Protection and Recovery option, and under that there is a Rescue and Recovery option.  However even within the Rescue and Recovery option I can't find any option to create recovery media.  It has 3 sub-menus:  "Back up your system", "Restore your system", and "Manage settings".  None of these has any sub option to create recovery media.
    I have all the screenshots but I cannot figure out how to display them here.
    My other concern is that the PC was supplied without a Windows Vista disk.  I cannot see how to create a Windows Vista CD/DVD from the system, so my dad has a licensed copy of loaded but no actual copy of the installation disk.  How do we do this?  If the hard drive fails after the warranty period, how would my dad install Vista on his new HDD?

  • TS1367 DISASTER....LOST MACINTOSH AND RECOVERY

    I have a macbook pro MD 101 .i am also running windows 8 in it through bootcamp.there was some start up problem with the windows ,so i did a windows refresh.after the refresh while holding the option button at the time of starting up there is no macintosh and recovery option.i am afraid now as i think i lost my macintosh part .is it so ?
    please help me out because there is a lot of important data in my macintosh HD .

    If you don't have a Genius Bar nearby, one option I would consider would be to run DiskWarrior against the drive. alsoft.com

  • Dell Inprision 2330 Backup and Recovery error message 0x4001100200001005

    A week ago, there were problems with the computer Dell Inprision 2330, and I'm using a Dell Backup and Recovery to restore the disk C to the image stored on the dvd disks. 3 days ago the computer began to hang when windows starts. I decided again to restore the system with dvd, but this time got the error message 0x4001100200001005.
    Tried to restore the image to another drive, but the error appears again.
    Other recovery media then dvd-disks "dell backup and recovery" I don't have.
    Please help.

    I was very disappointed with this buggy system recovery. After I got tired of trying to restore the system, I found a post "Download Windows 8.1 Retail and OEM.iso". Did everything according to instructions. Now the computer is running. Activation performed automatically.
    Recovery Media disks thrown in the trash.

Maybe you are looking for