MicroSD cashing problem with Symbian belle update

It’s only been 14 hours since I have updated to Symbian Belle, but after a short period of usage I noticed that my music would lag for 0.5 - 3 seconds, sometimes once, sometimes a couple of times a song.
My song library was located on my MicroSD 16GB class2 card that has worked in this N8-00 for the full 1.5 years that I have it. I now have formatted the internal and external drives and put in the same one folder of music. I listened to the songs and what I found out is that the songs on my MicroSD are acting up. The phone completely locks up for 0.5 - 3 seconds and continues. Its seems to happen moor to songs with an higher than 256kbps bitrate.
My problem with this BUG, is that it now happends with the update to Bella, and not to Anna or befor, therefor concluding that the software is not optimized as much for MicroSD card use.
Have you have the same problem since Belle, using an N8 or other device? Please post below.
3210, 3310, 8310, 7250i, N95, N95-8gb, N96, N8

Twinklestar wrote:
Hi Rayhipkiss,
I tried all sort of ways for N8 0599255 variant but nokia 3.3.86 doesn't show any Belle update
Well, I can definitely confirm that the Belle update is available for your product code. Other users facing the same issue mentioned that they had to un-install Nokia suite and re-install a fresh copy. You may also need to disable any firewall active on your PC (try this first before re-installing Nokia Suite).
All the best.
Ray.

Similar Messages

Google maps not working with symbian belle upgrade

guys after recent upgrade with symbian belle google maps stopped working is there any problem will belle dose it support google maps 4.1.1

For those people still can't get Google map to work on Belle after the Wifi trick, a hard reset finally fixed mine! (No, a soft reset did not fix mine, but you should try it first.) Yea, it's a pain in the butt having to reinstall some apps and reconfigure preferences. But my phone also runs smoother and the battery lasts longer, as least it seems. I still need to turn on Wifi for Google map to start.
Detailed steps:
Do a full backup with Nokia Suite, just in case. (If you restore later, do not restore apps & preferences. Otherwise, Google map won't work.)
Put phone in Offline mode to end all calls and connections: Press Hangup > Offline
Try Soft reset first: Settings > Phone > Phone Management > Factory Settings > Restore.
Reinstall Google Maps.
If soft reset didn't work, try Hard reset: Settings > Phone > Phone Management > Factory Settings > Delete data and restore
Enjoy!

Is symbian belle update available for C7 Or E6 soo...

Is symbian belle update available for C7 Or E6 soon
Shady Shams
SHASHOsun
Solved!
Go to Solution.

The symbian belle update Will be available for all phones that are running symbian Anna now according to Nokia. But the date of availability is still a mystery... The official release date for symbian belle is not a date but a time frame that is from October to December 2011. But with Nokia yet to release symbian Anna to several regions, looks like symbian belle's arrival may be delayed. Realistically we can expect in December 2011 or January 2012. If it goes beyond that then you'll be seeing threads of angry customers asking for it to be released soon. :-)
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

E6 Symbian Belle Update release date in India

Please tell the Symbian Belle update release date for E6 in India.

Nokia doesn't announce dates for firmware updates, you'll receive it when it is available for your phone. Keep checking Nokia suite and switch on automatic updates in the 'software update' app on the phone.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

N8 Symbian Belle update:: Long Wait!!!

Hi Nokia,
I would like to share my thought, viewpoint on Nokia's firmware updates and it's availability to the global customers
Yes, as mentioned in the subject, I am coming to the much discussed and anticipitated Symbian Belle update for the Symbian 3 smartphone portfolio. Like all other customers, I was waiting for a good user experience on my Nokia s-phone. Symbian Anna might be the first step, but Belle definitely looks a Uber UI for all the users.
Now, let me explain my point: Nokia may release the Belle firmware for Nokia N8 someday in Q1 2012. I am definitely going to get that as I would keep this one in trash as no one wants an indefinite wait. And I may switch to some other phones running on Android/ or anything which I feel 'the cool one'. And I am not going to take another Nokia phone as this experience is horrible to wait for an update (having Nokia said "we don't & won't give the s/w update schedules prior"- it is like We (Nokia) would do whatever we want, and your (customers) interests doesn't matter). I was loyal to Nokia and keep this brand for nearly 10 years with 25+ phones from Nokia. And ultimately, you are loosing me (Nokia doesn't bother, I know). Not to try it's Windows portfolia as it's updates would be available only when Nokia feels to do it.
If this is a strategy to sell off new phones with latest OS (701 viz), this won't work well, as you may add a few customers and ofcourse sell some handsets, but a huge chunk of customer base will move away from Nokia. Another blunder is- the release of update is happening when the update itself is 'Outdated' compared to the then Smartphone OS Versions.
I know this Post looks like my frustration vent, but certain that others who have similiar views could like or discuss this
Regards,
Harish.

Hi Guys
As frustrated as everyone might be, including myself, I think it's only fair if we look at all sides of what's currently happening.
I, for one, get a bit uneasy reading about a Leaked version of our Long awaited O.S, but hey, that's just how this world operates, there's leaks almost everywhere and we just need to learn to live with it.
It is a fact that Nokia has lost much of it's market share to other manufacturers and it seems as if this happened overnight, but I think it's fair that we give credit where it's due. Anna was launched recently, August if I'm not mistaken, and 3 Months down the line we're at Nokia's throats for another update. Mind you Anna was not just a Bug Fix, it was a MAJOR update, which some countries still don't have due to some errors...... Before the Much Talked about iOS5, iOS 4 was made available to the public for the iPhone and iPod touch on June 21, 2010 (More Info Here), almost 15 Months in between, including the Official Launch date of the iPhone 4S with iOS5, yet we can't wait for more than 3-4 Months after a Major Update? Remember, the S^3 phones aren't the only phones that nokia offers on the market, they offer a wide range (Look at the most recent E-Series Software Updates that rolled out some days ago). If the N8 was Nokia's only Phone, I'm certain things would be running smoother, not Perfect, smoother.....
I would also love to see some sort of Improvement in here and there from Nokia, but trying to regain Market Leadership will not happen overnight and our support, as Nokia Users, will sure go a long way.
Nokia has in the years given us Products to be proud of, why can't we show the same support as we did before?
All I'm saying is, at the end of the day, we all want value for money, we chose Nokia, they are having difficulties, Let's support 'em, we're all human..... We will get Belle, we've only had Anna for about 95 days or so.... And, if True, with Carla and Donna under dev. we know that our phones will still be looked after...... Just a thought....
N8-00,Galaxy Tab 10.1

Symbian Belle update for S60v5

Hai,
I've a better suggestion to you, Nokia,
Symbian Belle is a nice OS than other Symbian, very similar to Android,
Now you gives Symbian Belle update for all your Symbian^3 devices, like Nokia N8, E7, C7, X7 etc...
My idea is that, Please give Symbian Belle update for Symbian 5th edition phones, if you can't, please give only for Nokia X6, because of this is the only phone with CAPACITIVE TOUCH SCREEN in S60v5 section, only one disadvantage is X6 don't hv 'Multitouch'.
Please Nokia, please...
Regards,
Basim.vt
Moderator's note: We have removed personal information from your post because we do not recommend it be shared on a public forum.

Hi basimvt
This is just an advice.
You are right in asking for that to Nokia but I can tell that the chances for you to get what you're asking for are less than ZERO. So my advice to you is to go for an app wich I used myself when I had a S60V5 device and it is "SPB Mobile Shell", I assure you won't regret it. That app made my old 5530XM a decent device to use.
Cheers!
PS.: I've posted the same response in here because they're asking for the same:
/t5/Software-Updates/Atleast-give-as-some-belle-lite-version/td-p/1344361

When symbian belle updation come for nokia 500

.. plz.. i want to know when symbian belle updation come for nokia 500

Nokia Belle is specifically tailored to each phone model, including the Nokia 500. Due to technical specifications, Nokia Belle for Nokia 500 differs to other Nokia Belle phones in the following aspects:
Nokia 500 with Nokia Belle only supports 4 homescreens.
Nokia 500 does not support NFC.
FM transmitter and widget are not supported in Nokia 500.
Nokia 500 includes Nokia Maps 3.06 instead of 3.08.
Additionally, Nokia 500 will get Angry Birds with the Nokia Belle update. This update is expected to launch on Feb 15th.
(Hit the star if it helped you)

Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

Not sure how this is an ipod touch question.
Perhaps you should post in the itunes forum.

Problems with the windows update site in 32-bit Vista Business

Hi Everyone,
I am experiencing problems with the windows update site. As far as I know it shold make a link to the Windows Update module on-board and show the available updates after scanning. However, I get to the page that says "Checking if your computer has the latest version of Windows updating software for use with this website" and the next page I get is "The website has encountered a problem and cannot display the page you are trying to view". The error number is 0x80070002. I go to the knowledge base and delete the content of the Data Store folder as advised, but to no use at all. Active X controls are enabled Java is working fine. I've cleaned the register and everything, did a complete scan with Onecare as advised by Microsoft, which did not find anything but again the same error message. I am using KIS 2009 and I am sure I have no viruses or any other malware. I even tried to go to the update site with the KIS switched off but to no avail too. On the other hand I don't have problems with the automtic updates and when I run a manual update from the Update module everything is OK. Do you have any suggestion as to what might be the issue with the website updates?
P.S. I am using 32-bit Windows Vista Business on a Lenovo W500.

hello
You may be having a problem with the windows update agent.Since its a problem relating to windows update microsoft support personnel may help you out.follow this link and contact them by chat or email
http://support.microsoft.com/common/international.aspx?gprid=6527&acty=Start&ctl=Region&wf=Workflow&...
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

I have a problem with my application update since i updated to iOS6

i am having a problem with my application update since i updated my iphonw to iOS 6. small updates are taking very long time and even not getting finished after several hours.
my internet connection is very fine and having good speed. i think updating to iOS 6 was a mistake....

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

I am having problem with iMessage after updating my 5s to iOS 8.0.2

I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

Hello Huyen,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Messages:
iOS: Troubleshooting Messages
Regards,
Jeff D.

MicroSD cashing problem with Symbian belle update

Similar Messages

Maybe you are looking for