Microsd not detected in any phone after using for ...

I have nokia c3-00 with a memory card of 2gb which I got with the phone.i used it for like 2yrs.my phone has had several falls so far.yesterday it fell down and the screen broke.i got the screen repaired.now I see that the memory card is not being detected in the phone.i tried using other microsd cards but my phone detected them.also,other phones cudnt detect the same microsd.pls help.i have important data on it.

@surya1996
Was microSD password protected?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Dear sir while using the Internet 3G on my phone after using for 15 min my phone back panel getting hot every time after closing the inernet it becomes normal cool plz suggest me what to do & for 3G use I'm getting battery back up for 3 to 4 hrs plz help

    Dear sir while using the Internet 3G  on my phone it getting hot at backside specially back panel below apple logo and after stopping the use of Net it becoming normal also for 3G I'm getting battery back up for 2 to 3 h
    rs only plz tell me what to do plz reply it is normal or any problem with my phone

    Please don't respond with useless comments.  I've already addressed the fact that my screen was broken a few months ago.  My phone may or may not be broken beyond repair either way, as I said before I can't afford a new phone.  It's a strange problem because from what I can tell no one else has posted the same problem anywhere I can find.  Don't be a dickhole.

  • After installing 10.9.3 computer won't recognize Canon SD 1200 IS camera: get message "a camera was not detected".  Any suggestions?

    After installing 10.9.3 computer won't recognize Canon SD 1200 IS camera: get message "a camera was not detected".  Any suggestions?

    I have an older Kodak which they have stopped supporting and I have to take out the SD card and put it in the card slot to download pictures.  I read other threads where this solved similar problems for others.  Some have a separate card reader but I just use the one on my imac.  Wish it was more convienent to get to it though.

  • Load status in PSA "Request not updated to any data target using delta"

    Hi,
    I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
    There are lot of requests are there in PSA but some of them loaded with status
    u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
    Others u201CRequest not updated to any data target using deltau201D  -- need to delete
    We are deleting manually every week end.
    Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
    Thanks for your help in Advance,
    Raj.

    Hi Rajesh,
    You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
    Best Regards,
    Bansi.

  • Master data loads Request not updated to any data target using delta

    When checking the PSA the request updated ICON has red triangle and the mouse over says
    "Request not updated to any data target using delta".
    I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1.  DTP has not been implemented yet. The system was just upgraded in July.  I am unable to schedule deletes from the PSA for successful loads.  However, I think the data is updating to the info objects.  My Info package has the selection to PSA then in the InfoObject package by package.  
    How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
    Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

    Hi shikha,
    The load has not failed but I am unable to delete the load from the PSA.
    If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
    Thanks for the reply.
    Regards,
    JoeM

  • Request not updated to any data target using delta

    I am on BI 70 using 70 DataSource.  I executed InfoPackage in full update, then ran DTP in full mode.  There is only 1 data target.  The requests were successfully updated in the target DSO.  However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle. 
    My questions are:
    1.  Is this normal?
    2.  I need to do more full loads.  When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
    Thank you.
    Rebecca

    Hi Rebecca,
    To answer your questions
    1. Yes. This is normal.
    2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA)  would be re-loaded to the same data target .
    If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
    Hope this helps!
    - Meera

  • PSA showing Request not updated to any data target using delta

    Hi BWers,
    I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
    Requests for PSA /BIC/Bxxxx
    I see the Request updated having a Red triangle with an exclamation mark in it and it says
    "Request not updated to any data target using delta"
    Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
    Thanks for all your help.
    Manish

    Reg : Delta Load : Production Data
    Current Scenario :
    we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
    Structure underlying infocube:
    2 Data Sources >> 1DSO >>1 Infocube .
    Usually the Data is loaded in delta format on daily basis using process chains.
    For last one month the delta is not picking properly :
    Example :
    A WBS Element is created 2 years back and it open and getting its update into BW ,
    latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
    I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
    its showing this error:
    Request not updated to any data target using delta,
    i went and created DTP which didnt help much Because latest isnt caputered .
    if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
    how to over come this as this is a production issue
    Obaid : pls help me on this issue , any others expert pls help

  • Freeze up after using for awhile...

    I am having issues with my iBook freezing up after using for awhile. It will start up just fine, programs run just fine, but when i've been on the internet for a while (or typing in Word or anything requiring a significant amount of memory)my iBook freezes up and there is a periodic clicking noise coming from the lower left hand side (by the vent). I've tried resetting the memory and that didn't seem to help anything. Once the computer is frozen it is down for a while. It will only start up after it has been disconnected from any power source overnight. Then everything runs fine for a while and then the clicking begins again. Does this sound like an overheating issue, harddrive issue or software? Any help would be greatly appreciated!
    iBook G3 (white)   Mac OS X (10.3.9)  

    Thanks for all the help! Here's an update.
    My iBook now refuses to safe boot but instead will boot up normally! I haven't had any issues with it freezing up but I have only been using iTunes to transfer music to my ipod.
    The S.M.A.R.T. status of my drive is "verified".
    When attempting to boot into "safe mode", the loud clicking happens immediately but stops after about a minute or two and then the grey apple and progress indicator appear. It will stay like this for a couple of minutes and then it automatically restarts and will boot up into the normal mode.
    When attempting to repair my drive via the system disk, I get the error message that the underlying task reported failure on exit. Written in red in the message window is "Keys out of order".
    Also, the archive and install feature is not working. It tells me that there was an installation error and to retry installation.
    I will look into expanding the memory and additional disk repair software.
    I connect to the internet via ethernet(cable modem) and/or airport.
    Thanks again for all the help!

  • Photoshop CS6 shut down after using for 5mins; no image can be display on canvas.

    Photoshop CS6 shut down after using for 5mins; no image can display on canvas.

    Thanks for your help.  Actually the problem was solved when turning off the GPU.   In the mean time, I would like to upgrade my Video Card, too.  My existing vedio card detials are as below.  May I seek your advice on any good method other than replace it.

  • I have an AT&T locked phone valid contract for another year. I am planning for India visit for 3 months and I want to unlock my phone to use for my purpose. Apple care can help on this? or AT&T Customer care?

    I have an AT&T locked phone valid contract for another year. I am planning for India visit for 3 months and I want to unlock my phone to use for my purpose. Apple care can help on this? or AT&T Customer care?

    It's not going to happen. Even a cursory reading of the forums would have revealed this fact.
    Apple can NOT help you. AT&T WILL NOT help you.
    Leave your iPhone at home or in airplane mode while you're in India and buy yourself a cheap disposable phone to use while you're in India. I believe AT&T still has a program where they will put your account "on hold" while you are gone for a small fee.

  • I have mac os x 10.6.8. I am trying to back up my information via time machine and it's not letting me click on the "use for back up" option.

    I have mac os x 10.6.8. I am trying to back up my information via time machine and it's not letting me click on the "use for back up" option.

    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.bombich.com/software/updates/ccc-3.5.html
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    Create an OS X Lion Install disc
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html

  • I can not activate my iphone to be used for the first time, it is blocked. how do i unlock. can someone help me

    I can not activate my iphone to be used for the first time, it is blocked. how do i unlock. can someone help me

    dis the activation server is not available try again later or contact tech support.
    has no sim card installed more already tried with the sim card still not of.
    bought in china.

  • Hello! I havent received any code after paying for it! Money's been withdrawn from my bank account and all I have now is a transaction code. How can I get the code for Photoshop?

    I havent received any code after paying for it! Money's been withdrawn from my bank account and all I have now is a transaction code. How can I get the code for Photoshop?

    You'll need to call Adobe customer support on the telephone.  There's little we fellow users can do to help you.
    -Noel

  • Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

    My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
    {CE3119AD-35EF-41CF-9C21-C7698FEB8393}    2013-10-14 21:53:00:256-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 4 updates.
    {EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}    2013-10-15 04:15:54:069-0700    1    162    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Download    Download succeeded.
    {77DAE88F-2795-4258-8BBF-8D27E53662CF}    2013-10-15 12:10:38:196-0700    1    193    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates:  - Security Update for Windows 7 for x64-based Systems (KB2862330)
    {1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}    2013-10-15 12:15:25:676-0700    1    183    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Install    Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
    {A220898A-E5FE-4FE7-8413-2B0C7B4013D0}    2013-10-15 12:15:25:766-0700    1    202    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Reboot completed.
    {A5400FF2-33ED-4A47-8409-13E5DFE16A6D}    2013-10-15 19:29:31:486-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {43C533EE-775D-445E-A652-06648B72DE65}    2013-10-15 19:29:49:702-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}    2013-10-15 19:30:05:744-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 3 updates.
    {4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}    2013-10-15 19:30:08:753-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {51248882-41AC-4E59-B813-87AD326310AD}    2013-10-15 20:00:05:044-0700    1    183    101    {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}    501    0    wusa    Success    Content Install    Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
    {FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}    2013-10-16 00:11:39:832-0700    1    148    101    {00000000-0000-0000-0000-000000000000}    0    c8000247    AutomaticUpdates    Failure    Software Synchronization    Windows Update Client failed to detect with error 0xc8000247.
    Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
    (1) Checked Setting,  set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
    (2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
    (3) Ran MS FIXIT
    (4) Ran System File checker Scan (sfc /scannow)
    (5) Ran CHKDSK /F
    (6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
    (7) Ran Update for Windows 7 for x64-based Systems (KB971033)
    None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
    Any help or guidance is appreciated.
    Solved!
    Go to Solution.

    The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
    The End!

  • TestStand not updating th descriptio​n after using the edit substep

    I've created numerous custom steps in TestStand.  None of them will update the description after I use the edit substep and change some of that steps properties.  As an example, I have the following step description...
    str(Step.Channel.DeviceName)
    After I use the edit substep, which changes step.Channel.DeviceName, the description does not update.  However, if I then open the properties menu for that item and either select "OK" of "Cancel" to leave the property window, it then updates to the correct values.  Placing down a new step will also force the description to update.  While this is not functionally causing any problems, it would be nice if the descriptions updated immediatly.

    Hey Dillon,
    The reason it doesn't update is because the sequence editor doesn't know that the sequencefile has changed so it doesn't know to redraw that window.  You can force it to redraw the window by calling the method IncChangeCount from the PropertyObjectFileClass.  If you increment the change count it should automatically update the description as soon as your edit substep completes.  Also a piece of advice, in the future if you have TestStand questions, you can probably get a quicker answer to them by posting on the TestStand forums, even if it is using the TestStand API in another programming environment like LabVIEW or CVI.  Hope this helps!
    Message Edited by Patrick P. on 12-06-2006 06:38 PM
    Pat P.
    Software Engineer
    National Instruments

Maybe you are looking for