Microsoft 2003 Server not able to do Microsoft Updates and giving a "404 error file or directory not found"

Can anyone provide a fix or suggest fixes for this issue and is there another way around getting updates from the site that i can try. Not sure why it keeps coming up with this error each time i click the microsoft update option.
thanks
Nexusxox

Hi Nexusxox,
In addition, To troubleshoot the winodws updates issue, please follow these methods:
1. You should be able to access the Windows Update website. If you can't access this site, try to use the
Windows Update Troubleshooter to fix the problem.
Refer to:
http://support.microsoft.com/kb/2497281#manually
2. Recreate SoftwareDistribution folder:
1) Stop the Automatic Updates and Background Intelligent Transfer Service services.
2) Delete or rename the %windir%\SoftwareDistribution folder.
3) Restart Automatic Updates and Background Intelligent Transfer Service services.
3. Reset Windows update:
How do I reset Windows Update components?
To do so: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added
protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge
Base: 322756 (http://support.microsoft.com/kb/322756/)
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

404 Error - File or Directory not found

Hi there
I have a simple CF page set to do a dump of the server only at this stage.
<cfdump var="#server#">
It works fine when I'm on the server itself and run from 127.0.0.1/mydomain/index.cfm
When I try to run from www.mydomain.com - I get a 404 file or directory not found
Is this a CF error or is this an error being thrown up from IIS
How do I get around this error ?
Thanks in advance.
Kind regards

Hi Nexusxox,
In addition, To troubleshoot the winodws updates issue, please follow these methods:
1. You should be able to access the Windows Update website. If you can't access this site, try to use the
Windows Update Troubleshooter to fix the problem.
Refer to:
http://support.microsoft.com/kb/2497281#manually
2. Recreate SoftwareDistribution folder:
1) Stop the Automatic Updates and Background Intelligent Transfer Service services.
2) Delete or rename the %windir%\SoftwareDistribution folder.
3) Restart Automatic Updates and Background Intelligent Transfer Service services.
3. Reset Windows update:
How do I reset Windows Update components?
To do so: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added
protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge
Base: 322756 (http://support.microsoft.com/kb/322756/)
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I just downloaded Itunes 11.1.4 (64-bit) and am running Windows 7, Itunes will not open and I get an error message about Microsoft runtime and I get an error R6034 and 1114 which says Itunes was installed incorrectly. Can anyone help?

I just downloaded Itunes 11.1.4 (64-bit) update and am running Windows 7. Itunes will not run after installing this update and I receive an error message R6034 on Loading Microsoft C Runtime Library incorrectly. Also Error message 1114 the Itunes Installer was installed incorrectly. Is there an new update for this problem? Is anyone else having this problem? Please help. Thanks.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99425)

When I start Firefox, I get an error message instead of my home page: Server not found Firefox ca

The error message is: Server not found
Firefox can't find the server at co108w.col108.mail.live.com.
If I then hit "Home" it goes to the home page. Changing the home page hasn't helped. Resetting Firefox hasn't helped. This just started today. Restarting the computer didn't help.
I'm using Firefox 18.0.2 and Windows 7.
Thanks.

Check for malware
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Weblogic 6 Post Installation Problem - weblogic.Server not found

I reinstalled my recent downloads of the evaluation
copy of Weblogic 6.0 server three times on my NT 4.0 Service
pack 6 notebook computer. Installation works. However, I can't
start the server using the "startWebLogic.cmd". I get an error
that says that the class "weblogic.Server" is not
found -
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
javap command cannot locate the class either.
My suspicion: weblogic .jar is corrupt.
Question: How do I get a new jar file? I have already
downloded the install files twice with no luck.
I have enclosed the command prompt messages.
[d:\bea\wlserver6.0\config\myadmindomain]setEnv
set WL_HOME=d:\bea\wlserver6.0
set JAVA_HOME=d:\bea\jdk130
set CLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
;d:\bea\wlserver6.0\lib\weblogic.jar;
set PATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visual Stud
io\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Microsoft V
isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Visual S
tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
Your environment has been set.
[d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
set PATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visua
l Studio\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Micro
soft Visual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Vi
sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
"d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath .;.\lib\weblogic_sp.j
ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserver "
-Dbea.home=d:\bea" "-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
cy" -Dweblogic.management.password= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
goto finish
cd config\myAdminDomain
ENDLOCAL
[d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
Class 'weblogic.Server' not found

It looks like your startWebLogic.cmd script has problems with the class
path. You should doublecheck that.
Thanks,
Michael
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Bindu Rao" <[email protected]> wrote in message
news:[email protected]...
>
I reinstalled my recent downloads of the evaluation
copy of Weblogic 6.0 server three times on my NT 4.0 Service
pack 6 notebook computer. Installation works. However, I can't
start the server using the "startWebLogic.cmd". I get an error
that says that the class "weblogic.Server" is not
found -
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
javap command cannot locate the class either.
My suspicion: weblogic .jar is corrupt.
Question: How do I get a new jar file? I have already
downloded the install files twice with no luck.
I have enclosed the command prompt messages.
[d:\bea\wlserver6.0\config\myadmindomain]setEnv
set WL_HOME=d:\bea\wlserver6.0
set JAVA_HOME=d:\bea\jdk130
setCLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
;d:\bea\wlserver6.0\lib\weblogic.jar;
setPATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisual Stud
io\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Microsoft V
isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\MicrosoftVisual S
tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
Your environment has been set.
[d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
setPATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisua
l Studio\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Micro
soft Visual Studio\VB98;D:\Microsoft VisualStudio\VIntDev98\bin;D:\Microsoft Vi
sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
"d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath.;.\lib\weblogic_sp.j
>
ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserv
er "
-Dbea.home=d:\bea""-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
cy" -Dweblogic.management.password= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
goto finish
cd config\myAdminDomain
ENDLOCAL
[d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
Class 'weblogic.Server' not found

Constantly keep getting error 404, server not found

Very frequently I keep getting the error message 404, server not found. This problem mainly comes up after I have been on the computer for a while, and I leave the web site that I'm viewing on for some time. I then return to the computer some time later, and when I try to refresh the page to update the info on the page (example: a weather site or yahoo stock market info) I keep getting, 404 server not found. When I try the option: try again, it does nothing to solve the constant problem. The only way I can get back to the web site and see updated info is to start firefox in safe mode. And, that does solve the problem. But why does this problem keep constantly occurring. And, why do I have to constantly have to restart firefox in safe mode to get going again. It would seem firefox should recognize this issue and solve it. I'm using what I believe to be the latest version, 15. Can someone shed some light on this issue? I did not have this problem with my older computer and an old version of firefox, version 3.6. But, since getting a new computer and using a new version of firefox, version 15, this problem constantly appears. Can some one help? Thank you.

Which security software (firewall, anti-virus) do you have?
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Surfing the web I constantly get a dialog box popping up that says "The connection was rest" or " Server not found" or "The connection has timed out"

Surfing the web I constantly get a dialog box popping up that says "The connection was rest" or " Server not found" or "The connection has timed out". The panel gives me three possible causes, none of which are correct and tells me to "Try again". Sometimes when I try again the site appears, sometimes it does after several tries and sometimes it never does. I called my IP, Cox and they told me it is a result of something Microsoft put out in their updates to IE (presumably to discourage people from using Firefox). Can you help me get rid of this problem?

Surfing the web I constantly get a dialog box popping up that says "The connection was rest" or " Server not found" or "The connection has timed out". The panel gives me three possible causes, none of which are correct and tells me to "Try again". Sometimes when I try again the site appears, sometimes it does after several tries and sometimes it never does. I called my IP, Cox and they told me it is a result of something Microsoft put out in their updates to IE (presumably to discourage people from using Firefox). Can you help me get rid of this problem?

Server not found in Kerberos database (7)

Hi!
Running the examples from
http://java.sun.com/javase/6/docs/technotes/guides/security/jgss/lab
works fine for me as long as I use the Kerberos test realm I have set up on a unix machine. But when I run the same classes against our Active Directory, the client spills a stacktrace, indicating that AD can not find the server in its database. But it actually is in that database, as the sample server can perfectly authenticate as exactly that principal!
Enabling all security related debug info i could find, this is the client dump:
$ java -Djava.security.auth.login.config=jaas-krb5.conf
 -Djava.security.krb5.kdc=##KDC##
 -Djava.security.krb5.realm=##REALM##
 -Dsun.security.jgss.debug=true
 -Dsun.security.krb5.debug=true
 -Djava.security.debug="logincontext,policy,scl,gssloginconfig"
 GssClient host ##SERVER##
scl: getPermissions ProtectionDomain (file:/xxxxx/ <no signer certificates>)
sun.misc.Launcher$AppClassLoader@11b86e7
<no principals>
java.security.Permissions@1a46e30 (
(java.io.FilePermission \xxxxx\- read)
(java.lang.RuntimePermission exitVM)
scl:
Debug is true storeKey false useTicketCache true useKeyTab true doNotPrompt false ticketCache is nu
ll isInitiator true KeyTab is null refreshKrb5Config is false principal is xxxxx tryFirstPass is tru
e useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
KinitOptions cache name is C:\xxxxxAcquire default native Credentials
Obtained TGT from LSA: Credentials:
client=##USER##@##REALM##
server=krbtgt/##REALM##@##REALM##
authTime=20070705103930Z
startTime=20070705103930Z
endTime=20070705203930Z
renewTill=20070712103930Z
flags: FORWARDABLE;RENEWABLE;INITIAL;PRE-AUTHENT
EType (int): 23
Principal is ##USER##@##REALM##
 [Krb5LoginModule] authentication succeeded
 [LoginContext]: login success
Commit Succeeded
 [LoginContext]: commit success
Authenticated principal: [##USER##@##REALM##]
Connected to address ##SERVER##/xxxxx
xxxxx
create server name with host@##SERVER##
Search Subject for Kerberos V5 INIT cred (<<DEF>>, sun.security.jgss.krb5.Krb5InitCredential)
Found ticket for ##USER##@##REALM## to go to krbtgt/##REALM##@##REALM## expiring on Thu Jul
05 20:39:30 GMT 2007
Entered Krb5Context.initSecContext with state=STATE_NEW
Found ticket for ##USER##@##REALM## to go to krbtgt/##REALM##@##REALM## expiring on Thu Jul
05 20:39:30 GMT 2007
Service ticket not found in the subject
Credentials acquireServiceCreds: same realmUsing builtin default etypes for default_tgs_enctypes
default etypes for default_tgs_enctypes: 3 1 23 16 17.
CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumType
EType: sun.security.krb5.internal.crypto.ArcFourHmacEType
KrbKdcReq send: kdc=##KDC## UDP:88, timeout=30000, number of retries =3, #bytes=1328
KDCCommunication: kdc=##KDC## UDP:88, timeout=30000,Attempt =1, #bytes=1328
KrbKdcReq send: #bytes read=101
KrbKdcReq send: #bytes read=101
KDCRep: init() encoding tag is 126 req type is 13
KRBError: sTime is Thu Jul 05 14:43:05 GMT 2007 1183646585000
 suSec is 487997
 error code is 7
 error Message is Server not found in Kerberos database
 realm is ##REALM##
 sname is host/##SERVER##
 msgType is 30
KrbException: Server not found in Kerberos database (7)
 at sun.security.krb5.KrbTgsRep.<init>(Unknown Source)
 at sun.security.krb5.KrbTgsReq.getReply(Unknown Source)
 at sun.security.krb5.internal.CredentialsUtil.serviceCreds(Unknown Source)
 at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(Unknown Source)
 at sun.security.krb5.Credentials.acquireServiceCreds(Unknown Source)
 at sun.security.jgss.krb5.Krb5Context.initSecContext(Unknown Source)
 at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
 at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
 at GssClient$GssClientAction.run(GssClient.java:171)
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAs(Unknown Source)
 at Jaas.loginAndAction(Jaas.java:94)
 at GssClient.main(GssClient.java:97)
Caused by: KrbException: Identifier doesn't match expected value (906)
 at sun.security.krb5.internal.KDCRep.init(Unknown Source)
 at sun.security.krb5.internal.TGSRep.init(Unknown Source)
 at sun.security.krb5.internal.TGSRep.<init>(Unknown Source)
 ... 13 more
Exception in thread "main" java.security.PrivilegedActionException: GSSException: No valid credentia
ls provided (Mechanism level: Server not found in Kerberos database (7))
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAs(Unknown Source)
 at Jaas.loginAndAction(Jaas.java:94)
 at GssClient.main(GssClient.java:97)
Caused by: GSSException: No valid credentials provided (Mechanism level: Server not found in Kerbero
s database (7))
 at sun.security.jgss.krb5.Krb5Context.initSecContext(Unknown Source)
 at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
 at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
 at GssClient$GssClientAction.run(GssClient.java:171)
 ... 4 more
Caused by: KrbException: Server not found in Kerberos database (7)
 at sun.security.krb5.KrbTgsRep.<init>(Unknown Source)
 at sun.security.krb5.KrbTgsReq.getReply(Unknown Source)
 at sun.security.krb5.internal.CredentialsUtil.serviceCreds(Unknown Source)
 at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(Unknown Source)
 at sun.security.krb5.Credentials.acquireServiceCreds(Unknown Source)
 ... 8 more
Caused by: KrbException: Identifier doesn't match expected value (906)
 at sun.security.krb5.internal.KDCRep.init(Unknown Source)
 at sun.security.krb5.internal.TGSRep.init(Unknown Source)
 at sun.security.krb5.internal.TGSRep.<init>(Unknown Source)
 ... 13 moreWhy's AD claiming in the KRBError that it can't find a sname/realm which exactly matches the principal it accepted for the server? This totally confuses me! Can please anyone bring some light?
Regards

It works now!!!
The exact procedure is:
- Create a new user in AD with an arbitrary name <username>. Use the same name in "User Logon Name", "User Logon Name (pre Win2K)" and "First Name" (odd, isn't it).
- Set the password, deactivate "User has to change the password at first logon", and activate "Password never expires"
- Create a mapping for the service name by entering into the command line: ktpass -princ "<protocol>/<fqdn>@<realm>" -mapuser "<username>@<realm>" -pass "*" -out dummy.keytab
- Check that the mapping is set and unique; use adsiedit.msc (Windows Support Tools).
- Now you can use the Java tool ktab to create your own keytab as usual and go.
But it is a science in its own right to correctly configure an Active Directory , especially for use with Kerberos. In particular error messages are hardly useful (as it is generally the case in the Kerberos world). It may help to read:
http://www.microsoft.com/downloads/details.aspx?FamilyID=99b0f94f-e28a-4726-bffe-2f64ae2f59a2&DisplayLang=en
and
http://www.microsoft.com/downloads/details.aspx?FamilyID=7dfeb015-6043-47db-8238-dc7af89c93f1&displaylang=en
Have fun!

In Firefox, I keep getting "Server not found" error - CONSTANTLY!

Two days ago I started getting the "server not found" error, off and on, daily. It is happening on both my desktop iMac 10.7, and my Windows 7 laptop. I keep having to hit the "Try Again" butting, and sometimes, several times, before a web site will finally launch. The only two extensions I have on both, are the Adblock Plus and the Last Tab Close Button, both of which, have been installed on said computers for months and months and months.
I went in and changed a setting to the "auto detect proxy setting", hoping that would work, and it did not.
I have Firefox version 21 on both computers, and it seems the problem started shortly after this latest Firefox update, and at the SAME TIME on both computers.
I do not have virus protection on my iMac, nor on my Windows 7 laptop, at the moment, but I have run online software to check for anything, and no issues, so I believe, it is not that which is the issue.
The firewalls on both computers are working fine and no issues there either, I have not changed any firewall settings, on either computer. It couldn't be the firewall, in my opinion, because this annoying error message started happening on BOTH of my computers, at the same time; I work on my iMac in the morning, then switch to my laptop in the afternoon, and same issue continues on both, and started at the same time, on both.
Is there something broken in Firefox from this last update of the browser?
Does anyone have any suggestions as to why both computers are having this issue, at the same time?
I have not tried using I.E. yet on my laptop, I rarely have ever needed to use that browser, and I hate it, so I don't use it.
Any help or suggestions, would be appreciated.

I followed those steps, but clearly some steps are missing. How do you "enable each extension one at a time"? The only choices I see in Safe Mode are "disable" and "remove."
And why is it that every other update to Firefox breaks Firefox? I've had to install add-ons just to be able to use it in Windows 8 with a touchpad.
Now that I think of it, it doesn't even matter any more. After years of Firefox loyalty (even after Firefox users have dropped to 28%), I'm off to download Google Chrome (up to 52%). I'll miss Firefox, but not the on-again, off-again performance.

I keep getting the following error "server not found.....firefox can't find the server at http." when I try to log on to one certain website.

I was able to access this website prior to 2 weeks ago. I can access this website on other computers without issues, and I can also access all other websites on this computer.
The following is what is listed in the navigation bar when I get the error message.
http://iphantom.com/wisd/restricted.html?fn=Default&FP=l&ip=10.201.5157&ibip=66.206.97.9&ldu=l&re=0&bu=wps.prenhall.com
I noticed it says wisd/restricted, but I can log on to this website using my wisd computer without issue, and I get the same error message at my home/other locations. So I know that it is not restricted. I have used all the other suggestions "no proxy", shut down firewalls, but nothing has worked.
Any help with this matter will be greatly appreciated.
Thank you,
Cody

go through this
[[Server Not Found - Troubleshoot connection problems|Server Not Found - Troubleshoot connection problems]]

FF 9.0.1 bizzare behavior:server not found, sites look wrong, left tab igoogle back, failed signons

'''Anyone else having problems with FF 9.0.1? I mean multiple, strange problems! Ever since I upgraded to this latest version of Firefox 9.0.1, I have frequent "server not found" on common web sites like www.google.com, www.amazon.com, www.tvguide.com, etc.
All these problem are frequent but inconsistent. Happens most, but not all of the time. Repeated attempts to execute a site url will, eventually (usually) get a good response.
Further, when pages are found, they open up looking wrong - unformatted text, no graphics, missing html commands, etc.
Also, on several sites, I am unable to sign on or exchange information/data. Logons are not accepted, fail or are repeated over and over, responses not recognized, etc. This seems to especially true for Yahoo and ATT web sights.
Lastly, just to add insult to injury, that damnable left side tab on my Google home page (igoogle) is BACK!!
Switching to Chrome and/or IE eliminates these problems, but I still prefer FF!
'''I have reviewed the articles here and tried several alterations on the config page, but nothing has helped.'''
I have flushed my cache, cookies, history with no benefit! I have also, as I am now, started FF in safe mode band EVEN in SAFE MODE, with EVERYTHING disabled, I still get the bizzare responses and the left tab is still back.
Is there a way to reload FF completely with every thing set as itv it was BEFORE the last upgrade or to go back to an earlier version? What is it about 9.0.1 that is causing all these problems?
BTW, incidently, aabout the same time as upgrading FF, I also switched from Comcast cable ISP to ATT DSL ISP at a even higher speed - 18.0 Mbps. Not sure if that matters; I think the behavior was evident BEFORE the switch over.
Any ideas or suggestions? Are the setting in my config under "useragent" correct? The Ivp6 settings?
Your help would be greatly appreciated!
Bob Woolf'''

'''Cor-el,
I think it's time to bring some of those kryptonian super powers of yours in to play! :)
Yes, I am still having problems. I tried to load in the online site for my bank, Navy Federal Credit Union. I got the old "server not found" BS. I did as you suggested and executed a SHIFTED Reload and that worked, at least in the since that I was able to get the opening page.
However, when I went to sign on, the trouble appeared. Similar to the failed logons and recycling sign ons that I had seen on Yahoo and a few other sites, WHEN I logged onto NFCU's page (they have an unusual three part logon), as soon as I sign on I am IMMEDIATELY told I have "timed out" on the session and am kicked off. Repeated attempts to access my account yields the same thing over and over. I tried to sign on using Internet Explorer and there was NO PROBLEM AT ALL, so the issue is specific to FF.
I then flushed the cache and retied; no luck. I tried SAFE MODE and again no luck. I then went in a flushed the cache, again, and deleted all associated cookies. Again no luck.
Then I flushed the cache, reset ALL the preferences and tried again, still no luck.
As it stands now, I have reset the USERAGENT entries, flushed the cache, reset the preferences and, removed the cookies and still, EVEN in SAFE mode, Firefox and NFCU can't get along. Neither can Yahoo.com!
So, after all that,I am at my wits end. Suggestions? Should I send you a refreshed copy of my troubleshooting dump?
Keep in mine that I have, up until 9.0.1 came out, been using FF to aces s all these sites without any problems. So I guess the question has to be: Exactly what was changed in 9.0.1 from the previous version that has made it act this way?
Ideas? Suggestions? Fixing this has become a full time job!
Bob W'''

Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

Can you post an ipconfig /all from the server and the DC?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Error "kdc: Server not found in database" on attempted connections using Network User Credentials

I am rebuilding my system after a recent debacle with Time Machine, which resulted in a complete wiping of my Open Directory contents. At this point, users can log into various computers on the network, when the hosts have been reconnected to the newly formed Open Directory and the trust certificate has been authorized. However, when users attempt to connect to any file share, the Network User Account credentials fail to gain access.
I am running Mac OS X 10.9.4 on all systems. Two mac-mini's are running OS X Server 3.1.2. One of these servers (mavericks1.pediatricheartcenter.org) is the Open Directory. While testing the system, I am using the console on "Mavericks1," so the following discussion involves communication between the two server hosts only.
From Mavericks1, I open the console and attempt to connect to my file server, named fileserver.pediatricheartcenter.org. I clear the console just prior to sending a "registered user" request to "FileServer" to gain access. Careful examination of the console records shows the following:
1. The Network User is authorized with a message "ENC-TS pre-authentication succeeded".
2. Mavericks1 lists a console message that reads "kdc: Server not found in database: krbtgt/[email protected]:no such entry found in hdb"
3. Mavericks1 lists a console message that reads "kdc: Server not found in database: cifs/[email protected]: no such entry found in hdb"
4. The process registers what appears to be a final failure before trying again with "kdc: Failed building TGS-REP to 127.0.0.1:64390"
FileStorage.local does not exist in the DNS, nor does it exist on FileStorage.pediatricheartcenter.org. That (local) host name was removed when the domain host name for filestorage.pediatricheartcenter.org was created.
1. Why does the kerberos process reference a host name that does not exist?
2. What might be causing the failed authentication exchange?
3. What can be done to remedy the issue?

I spent some time on the phone with Apple Support on Friday. Thank you to Linc Davis for providing some insights into the issues.
As a result of the conversation with Apple Support we learned the following, which I will report here for those who might find this page again:
First, OpenDirectories are extremely fragile. Once you have turned on your OpenDirectory, do not do any of the following:
Do NOT change the host name.
Do NOT change the IP address.
If you are going to attempt either of these things, you should make a clone of your drive (not just a TimeMachine backup, a fully bootable clone, just in case).
Performing these activities (particularly the changing of the host name) will "break" your open directory, and the only way to rebuild the open directory is first to fully destroy the original. Several services are also destroyed when OpenDirectory is broken, the most notable is Profile Manager.
DESTROYING OPEN DIRECTORY
To fully destroy OpenDirectory, it is more complex than simply turning off the OpenDirectory and turning it back on again. Perform the following steps:
Install WorkGroup Manager (it is depricated, but Apple still has a version available for use with OS X Mavericks to handle functions that the Server App does not perform like exporting users and groups).
Sign into WorkGroup Manager as the directory administrator (user name defaults to "diradmin" the password is defined on OpenDirectory creation).
Export the Users, Groups, Computers and Computer Groups to the Desktop or another safe location.
Close WorkGroup Manager
Turn off the OpenDirectory in Server App.
Delete the Server App from the Applications folder and put it in the Trash. (This will disable any active services that are marking various files as being currently in use. Don't worry, we will restore it from the Trash when we are done).
In the terminal, run the following command: sudo slapconfig -destroyldapserver
Make a backup of all website files (just in case)
Navigate to the folder /Library/Server and delete the ProfileManager folder. (If you willing to do so, delete the whole Server folder).
After deleting various folders in the /Library/Server directory, restore the Server.app from the Trash.
Run the Server App.
Set the computer's network connection and host name.
Create a new OpenDirectory.
Use WorkGroup Manager to import any exported files from Step 3.
If you deleted the entire Server directory, use the website backup to retrieve the files that comprise your web site(s) and use the Server App to link the file directories to the Web site's domain name(s).
Personal Note: These instructions got me farther than any other tips I had received previously. After following these instructions, I was able to rebuild my Open Directory. During the process of copying files from the old user home folders into the new user home folders, the computer froze and when it rebooted, all the users and groups I had created during the day had disappeared. Rather than trouble-shooting it again, I decided to do a fresh installation.
A NOTE ON HOME FOLDERS
PER APPLE SUPPORT: Do NOT use the default /Users directory for Network users. Apple Support wanted me to rebuild the home directory, but they noted I was not able to do this, because I had used /Users. This folder ("/Users") is a critical component of the OS X system, and will cause additional problems if the folder is destroyed and rebuilt. The directory id and permissions must remain unchanged from the original installation.
For this reason, Server administrators (like yourself) should use File Sharing in the Server App to create a new anchor point for home directories. Create a shared folder. Ensure that it is shared over the protocols that you will be using (AFP, SMB, WebDav), and then after selecting these values, check the box that allows the folder to be used as a home directory at the bottom of this list. This box will be greyed out if the system is not already bound to an OpenDirectory. If you have activated OpenDirectory on the same machine, the machine will operate as if bound to itself, and this field will be active. If the FileShare server is NOT an OpenDirectory master or replica, then bind the machine to an OpenDirectory via the "System Preferences > Users & Groups > Login Options".
If the local area network has FileShares that are enabled for home directory use, the folders will appear in the User Profile editor under the Home Folder list (See image)
In the screenshot above, I have selected a shared directory named "HomeFolders". By using specially defined home folder directory, the server administrator has the option of deleting and modifying the home folder if necessary. Creating a home folder directory in a location other than "/Users" is the recommended best practice by Apple Support.
If you are inserting files into the home folders, you will need to change the owner and the group to the new owners names. I copied files from the old user directories into the new user directories so that the users would have access to their old files. When my OpenDirectory crashed, and all the users were recreated, they were recreated with different system level user id's. The system therefore maintains a memory that the file was owned by the original owner, even though the system administrator has put it in the new user profile's folder. To fix this, do the following:
1. Prior to making the copy, run "ls -al" from the terminal on the new home directory root. You are looking for the default folder owner and default folder group. On my system it was the user name and a group named "staff".
2. When making the copy, do not replace the user folder. Copy the files into the file folder, not over it.
3. After you have moved files into the user's folders, you can use "sudo chown -R [owner]:[group] [homeFolderPath]/*" and "sudo chmod -R 700 [homeFolderPath]/*" (replace the [owner] and [group] portions of these commands with the owners and groups identified by the command in step 1, and replace [homeFolderPath] with a path to the user directory created for the specific user.
For example:
For the user johnnybgood, we might see the following:
1. We run "ls -al" on the newly created home folder and find that the folder /Volumes/HomeFolders/johnnybgood is owned by johnnybgood and the group "staff".
2. We copy or move files from the old locations using commands similar to the following:
       sudo mv /OldFolderLocation/johnnybgood/Documents/* /Volumes/HomeFolders/johnnybgood/Documents
       sudo mv /OldFolderLocation/johnnybgood/Desktop/* /Volumes/HomeFolders/johnnybgood/Desktop
       sudo mv /OldFolderLocation/johnnybgood/Music/* /Volumes/HomeFolders/johnnybgood/Music
       ....etc....
       (notice how we are not just moving the old johnnybgood folder to the new location.)
3. Next, we change the ownership and file permissions:
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Documents
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Documents
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
4. Let the user log in and use the system normally.

Server Not Found - php in CS5.5 'Live Code' Issues

Hi
I'm new to this Forum, so hello to one and all.
I have just started to learn php and was lead to believe that CS5.5 would be able to let me see what was happening when I place a new bit of php in the Live View. However, all I get is an error code saying the following:
Server Not Found
The page "http://ftp.sharkdesigns.co.uk/public_html/php.php" was not loaded because Dreamweaver could not find the server "ftp.sharkdesigns.co.uk". Please make sure you are connected to the internet and the server name is correct.
Not being a computer buff I have no idea why this should be happening, since I have built my web site on the CS4 version without any issues.
I have learned some HTML, CSS etc. by sheer trial and error, since the books I have assume that you know what you’re talking about to be able to read what they are talking about, but nobody explained what they are talking about when they talk about the stuff that you need to know … Confused? Join my world, because I’m so confused that I have lost track of everything I have learned and don’t know where to look in the hope that an answer will materialise. The problem is that I don’t use the special terms that are so common in this industry often enough to remember what they actually mean for more than a few minutes, so when I try to learn something new, I have to start all over again as if I didn’t know anything at all. By way of added frustration, I also don’t know what to ask or how to ask for it because I don’t know that it is there to be asked for in the first place (example: - if you can’t spell the word ‘One’, and there is no one else to ask how it is spelled, how do you look it up in a dictionary unless you can already spell it?).
The problem I have is that if it works I can use it, but if it doesn’t work you need a Masters degree to get it to work to use it, which I don’t, and there is just on one to ask what is going wrong. So unless you know what to ask and how to ask for it, which I don’t, you just have an error message that stumps you before you have even started.
I know that this is a lot of rambling, but I just need my system to work so that I can lean a little php to make my web site run better, and there is no one I know who can help.
Can anyone help?

Mark Shark Designs wrote:
Hi
I'm new to this Forum, so hello to one and all.
I have just started to learn php and was lead to believe that CS5.5 would be able to let me see what was happening when I place a new bit of php in the Live View. However, all I get is an error code saying the following:
If you have just started to learn php then you will want to set up a local server testing environment to test your pages rather than keep uploading the files to your remote and checking them out, which seems a bit backwards to me if your'e going to be using php a lot.
For PC:
http://www.webassist.com/support/documentation/how-tos/xampp_for_windows.php
For Mac:
http://www.webassist.com/support/documentation/how-tos/mamp_for_mac.php

Server not found when switching from 4g to wifi and vice versa.

I've had this issue for a while across multiple phones and multiple versions of Firefox for Android, and it does not happen with any other browser (which is upsetting). Whenever I am surfing the web and have multiple tabs open, and I switch from 4g to wifi or vice versa, I always get a "Server not found" error on both existing tabs and new tabs. This is an annoying issue that I am surprised to see hasn't been fixed. The only way I've been able to fix it is to quit and relaunch the app. I have tried removing plug-ins and reinstalling, but it has not helped.
Anything I could do to alleviate the issue?
LG G2 and Samsung Galaxy Note 3. Both on Android 4.4.2
Firefox for Android Ver. 35.0.1

''Roland Tanglao [[#answer-698502|said]]''
<blockquote>
Hi scruffy90:
You wrote "LG G2 and Samsung Galaxy Note 3. Both on Android 4.4.2 Firefox for Android Ver. 35.0.1 "
I just tried switching between HSPA+ aka 3G and WiFi on a Galaxy S5 running Android 5 and have had no issues but I think this may have been an issue in the past (I did a search for a bug in bugzilla.mozilla.org but couldn't find anything).
Are there any other details you could provide that could help us debug?
e.g.
# Are you using a proxy?
# Who is your WiFi provider?
# Have you tried other WiFi (e.g. the Wifi both at home and work)
Cheers!
...Roland
</blockquote>
Hello Roland,
No proxy on the phone or wi-fi network.
My ISP is Time Warner, but I supply my own router (Linksys e4200)
And this happens on every wi-fi network, at home and away from home.

Microsoft 2003 Server not able to do Microsoft Updates and giving a "404 error file or directory not found"

Similar Messages

Maybe you are looking for