Microsoft 2008 NPS Radius + wireless controller.
Hi,
We have implemented new Microsoft 2008 NPS Radius for authentification wireless controller.
i am seeing RADIUS server x.x.x.x:1812 failed to respond to request (ID 119) for client ............. in controller. But there no logs hitting to the NPS server either failed or success or other related.
Layer 3 comminucation is fine between controller & server.
As per the debug logs,controller forwarding request NPS server "Successful transmission of Authentication Packet tp ......NPS proxy ".
But there is no further key exchange or successful authentication logs, any idea on this?
Thanks
Shrinivas.K
Download NTRadPing and test to see if your radius is working. You can put a sniffer on and see if you see packets coming out of the wlc and radius. You can always remove the aaa from the wlc and add it back on and also remove and add back on the wlc as a aaa client on the radius server.
Thanks,
Scott Fella
Sent from my iPhone
Similar Messages
-
Microsoft 2008 NPS Radius + WLC
Anyone have any luck getting this to work? I am at this point just trying to get the radius set up and get the certificate pulled into the EAP section of NPS. Or know if Cisco supports this type of setup. My 2003 IAS box was a snap but now have the Windows Team forcing this god-awful OS onto me to use. Any help docs links appreciated.
Wow, this thread is still going?
I found a solution to the issue:
1. Install NPS
Start - Control Panel - Programs and Features - Turn Windows Features on or off
Rt-click Roles - Add Roles - Next - Network Policy and Access Services - Next - Next
Network Policy Server (tick) - Next - Install - Close
2. Start NPS and Register in AD
Start - Administrative Tools - Network Policy Server
Rt-click NPS (local) - Register Server in Active Directory - OK - OK
3. Configure Network Policy for Computers
Expand Policies
Rt-click Network Policies - New
Policy Name Computer Policy (or whatever you want to call it) - Next - Add
Select Windows Groups - Add - Add Groups
Enter Domain Computers - OK - OK
Select NAS Port type - Wireless - IEEE 802.11 (tick) - OK - Next - Access Granted - Next
Microsoft Encrypted Authentication MS CHAP (untick) - Add
Select Microsoft: Protected EAP (PEAP) - OK - Next - Next
Select Framed-Protocol | PPP - Remove
Select Service Type | Framed - Remove
Select Encryption - No encryption (untick) - Next - Finish
4. Configure Network Policy for Users
Repeat steps in 3 above substituting User Policy as name and Domain Users as Group
5. Setup RADIUS client
Expand RADIUS Clients and Servers
Rt-click RADIUS Clients - New RADIUS client
Friendly Name: WLAN Controller Name of your choice
Address (IP or DNS): IP address of Controller
Vendor Name: Cisco
Shared Secret: The Access Key you set on the Controller - Confirm Shared Secret - OK
6. Set up Wireless GPO (if you want to automate client distribution)
Start - Administrative Tools - Group Policy Management
Rt-click your domain object and Create a GPO in this Domain and Link it Here
Call it WirelessClient or whatever floats your boat
Rt-Click the GPO - Edit
Computer Configuration - Policies - Windows Settings - Security Settings - Wireless Network (IEEE 802.11) Policies
Rt-click Wireless Network (IEEE 802.11) Policies - Create a new Wireless Policy
Policy Name WIRELESS (or whatever)
The rest of the settings need to be as per your controller setup, below are settings for WPA2 enterprise
Description: Wireless network - yadayada
Authentication: WPA2
Encryption: AES
IEEE 802.1X tab - Settings
Trusted Roor Certificate Authorities - find your server's root certificate in the list and tick - OK - OK
Repeat for additional SSIDs if necessary
That should do it - it worked for me! -
Cisco Nexus to use Radius AAA authentication using Microsoft 2008 NPS
I have a Nexus 7010 running
Just wondering if you can help me with something. I'm having an issue with command authorization thru our aaa config. We don't have a problem authenticating its command authorization that is not working. From what I have seen and read Nexus NX-OS 6.x does not have any commands for aaa authorization unless you are configuring TACACS+. My basic config is below if you can help it would be much appreciated.
>>ip radius source-interface mgmt 0
>>radius-server key XXXXX
>>radius-server host X.X.X.X key XXXXX authentication accounting
>>radius-server host X.X.X.X key XXXXX authentication accounting aaa
>>authentication login default group Radius_Group aaa authentication
>>login console local aaa group server radius Radius_Group
>> server X.X.X.X
>> server X.X.X.X
>> source-interface mgmt0
Also does anyone know how to configure Microsoft 2008 NPS as a Raduis server to work with Nexus? I have read a few post that suggest changing the
shell:roles="vdc-admin" in the Attribute Value field in the RADIUS server
Does anyone know if this works????
ThanksI have never done this before with ACS but not with NPS. However, you are in the right path. Nexus uses NX-OS which is different in some regards to regular IOS. One of those differences is the AAA setup. In NX-OS you assign users to roles. So for full access you will need to return the following attributes from your Radius server:
Attribute: cisco-av-pair
Requirement: Mandatory
Value: shell:roles*"network-admin vdc-admin"
For more information take a look at this link:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/115925-nexus-integration-acs-00.html
Hope this helps
Thank you for rating helpful posts! -
hello,
Does anyone know where I might find a document spacific to 2008 / NPS / WLC intergration?
thanks very much for your time,
greg
Message was edited by: GREGORY WHYNOTTThere are some good NPS server installation guides on the net - follow all of the recommended best practices from Microsoft for security and maintenance. When you have a sound base system and the other required components to start this test procedure with a sound NPS server. Here is where the integration occurs between NPS and WLC;
Set the Auth and Acct ports
Set your NPS Server access ports by right-clicking the globe symbol of the NPS Server
Select properties, go to the properties tab and enter 1812 for auth and 1813 for accounting.
Next, Configure the RADIUS Client Settings Remember that to NPS the WLC is a RADIUS Client (along with other NAS devices like APs, WLCs, etc.)
Configure the RADIUS Client Settings
Expand the options below the NPS Server globe icon
Add the WLC 5500 in the NPS server as a Radius Client
1. Right-click RADIUS the Client and Select New RADIUS Client
2. Enter Friendly Name and IP address of the Cisco WLC
3. Select RADIUS STANDARD as the RADIUS Vendor
4. Click the Manual radio button to enter the RADIUS key manually
5. Enter a strong RADIUS key (make sure you put it in your key pass keeper you will need to add the same shared key to the controller)
6. Check the Enable Client box
7. At the time of this writing the controller does not support the Message authenticator setting leave unchecked in advanced tab.
8. Click OK to close the new RADIUS Client configuration.
Configure a Connection Policy (This policy determines which network access server to send requests to)
9. Right Click the Network policy and Select New
10. Enter a Policy Name (e.g. Connection to Wireless)
11. Select Unspecified for the Type opf Network Access Server
12. Add a Condition – pick NAS port type Wireless - 802.11 Click OK.
13. Add another Condition - choose the group from the AD Domain to grant access (e.g. Domain/Wireless Users) Click OK.
14. Optional - Add another Condition - a Condition – Add Client IPV4 Address (this is the Controller's IP address) Click OK.
15. Click Next
16. Authenticate requests on this server.
17. Click Next
18. Do not override security here.
19. Click Next.
20. We won't be applying attributes here.
21. Click Next.
22. Finish.
Configure a Network Policy (This determines access)
23. Right Click on Network Policies and choose New.
Enter a Policy Name (e.g. Wireless )
24. Select a Windows group Domain/Wireless Users to be allowed access
25. Click Next.
25. Select Grant Access - Access is granted if Client attempts match the conditions of this policy. Click Next.
26. Configure Authentication Methods
27. Click Add..Microsoft Protected EAP a methods box will be presented
28. You can also check v2 below if your organization security policy allows.
29. You can double-click Microsoft Protected EAP (PEAP) and pick the order - move secure password up.
30. In the same dialog window select the certificate used by NPS to identify itself to the client (your Windows 7 wireless client)
Note: Microsoft has lots of documentation about this so look there for group policy guidance and how to get it in your client's trusted root.
31. Click Next
32. You can add constraints such as time, etc. here. Click Next
33. On the the Configure Settings dialog choose Encryption, Strongest Encryption. Click Next.
34. This tab is the IP settings tab and that depends on your network. For now, choose Server settings determine IP. Click Next.
Add any further Constraints and Conditions after you get your tests working.
The WLC
There is a setup wizard on WLC..it will ask you to set up the RADIUS server.
To configure a RADIUS server now, enter yes and then enter the IP address, communication port, and
enter no. (Type yes, NPS IP: subnet: Gateway:
If already set up..
Configure Security and AAA Server in WLC 5500
1. Browse to the IP address of WLC.
2. Click Login and use your username and password credentials.
3. Choose Security > AAA > RADIUS > Authentication and then click on New to launch RADIUS server configuration page.
4. Choose the Server Index (the priority order of the RADIUS server). The controller tries Index 1 first, etc.
5. Enter RADIUS Server IP Address.
6. Shared Secret Format for now set to ASCII.
7. Enter the Shared Secret and Confirm the Shared Secret (Be sure to use the exact Shared Secret you used in NPS).
8. Click on Wireless. In the left hand pan click Authentication. You will see the IP address and port number 1812 of Radius Server. You need to match the RADIUS Authentication port with the port you are using in NPS. (Remember, you set that first on NPS above)
9. Click Accounting. Click New on right hand top corner. You will be presented with a window to add a server, use the same Shared Secret and Port 1813.
10. Apply changes.
11. To add another RADIUS server Choose SECURITY > AAA > RADIUS > Authentication and then click New to navigate to this page.
12. Click on the WLANs Tab >Click on a WLAN>Click on General Tab>Check Enable on Status and Check Enabled on broadcast SSID
13. Click on the Security Tab>Click Layer2 Tab>Select WPA+WPA2 from Layer2 security drop-down list>Check WPA policy and the same page, enable AES and in Auth Key Mgmt, select 802.1x. Now click the Apply button.
14. Click on AAA Servers>Select Authentication and Accounting server NPS.
15. Ensure that Enable is checked for both Authentication and Accounting radio button. Click Apply.
Remember to think about the RADIUS process and your policies as you troubleshoot;
Likely gotchas;
The shared secrets are mismatched
The NPS Server certificate is not in the wireless client's trusted root (laptop)
You are evaluating user dial-in properties and don't mean to.
Your policies don't grant access or don't match.
Use the logs and the Microsoft Reason Codes.
Review appropriate Cisco WLC documentation http://www.cisco.com/en/US/partner/tech/tk722/tk809/technologies_configuration_example09186a0080782507.shtml
Finally, remember that this is a baseline test server to prove your wireless system works. Before deploying you will want to look at other conditions and constraints for limiting access and authentication by building your security in layers. And you will want to test the system and run security audits. Run the Best Practice Analyzer from Microsoft and consider adding Smart Cards or tokens to your installation. http://technet.microsoft.com/en-us/library/ee922674(WS.10).aspx
Good luck. -
Wireless Controller and Microsoft Windows 2008 NPS
Hello Community,
Got a Nightmare project to convert our Wireless over to Windows 2008 NPS for AP, Controller and User Athenication. Anyone have a link to a good Deployment Guide/How To on what is needed for the NPS Server (esp the attributes for AP, Contoller and Users)?
Thank You
MichaelSo you are looking to use RADIUS to authenticat the managment users and the actual wireless clients?
RADIUS Managment
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080782507.shtml
This goes over what attribute you need to return from the RADIUS server.
For the users:
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bfb19a.shtml
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered -
Authentication Failed to 2008 NPS from Cisco IOS VPN
I'm trying to authenticate VPN connections to a Windows 2008 NPS Radius server.
Local authentication works fine.
Here are cisco configs:
aaa new-model
aaa authentication login default local
aaa authentication login VPNauth group radius local
aaa authorization network VPNgroup local
aaa session-id common
ip radius source-interface Loopback0
radius-server host x.x.x.x auth-port 1645 acct-port 1646 key 7 xxxx
crypto map VPNMAP client authentication list VPNauth
crypto map VPNMAP isakmp authorization list VPNgroup
crypto map VPNMAP client configuration address respond
crypto map VPNMAP 10 ipsec-isakmp dynamic dynmap
... other crypto commands
This is the section of the log from NPS:
Authentication Details:
Connection Request Policy Name: VPN
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: x.x.x.x
Authentication Type: PAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 16
Reason: Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.
I do have PAP enabled on the Network/Connection Request Policies...
I'm stuck
Please helpCan you run a "teat aaa " command to see if the user can be authenticated successfully?
I think this might be a configuration issue on NPS. You can google it. Here is one I found, refer to "irishHam" post.
http://social.technet.microsoft.com/Forums/en-US/winserverNIS/thread/bfbbbae4-a280-4b3f-b214-02867b7d33e3 -
2504 Wireless Controller and Server 2008 NPS
I want to configure a simple NPS/RADIUS server for wireless authentication. I've read well over the EAP setup, and becaues it makes use of certificates it isn't going to work for non-domain computers. I'm looking for a way to copy what I have to VPNs, where when a user tries to login it ask for their username and password.
Ergo, when a computer, ipad, iphone, android, or mac connects to the wireless I want them to be asked for their domain username and password. If possible I'd like to keep it so they do not need to specify domain\username but rather just their username.
Is what I'm looking to do possible? I've configured it with EAP but again in this deployment I cannot make use of certificates or a domain CA. I am also not able to touch every machine that comes in to connect to the wireless. I am also looking to use LDAP/RADIUS in place of a PSK or WEP key so that user passwords can be changed per the domain policy every so often. We also have a wireless users group so not just anyone can connect. For every other non-company employee we already have a restricted SSID for guest with a PSK.
Thanks in advance for any and all suggestions!Joe:
Having NPS, you have the options to configure PEAP-MSCHAPv2 or EAP-TLS.
EAP-TLS: mandates a certificate on the server as well as a certificate on every single machine for authentication purposes.
PEAP-MSCHAPv2: mandates a certificate on the server only. Users connecting to the wireless network must trust the certificate (or, user devices can be configured to escape this trust and connect even if the server cert is not trusted).
for PEAP-MSCHAPv2, Your options are:
- Buy a certificate for the server from a trusted party (Verisign for example [which was bought later by Symantec]). This way all devices will - by default - trust the server's cert.
- Install local CA. Install a cert on the server and then push the root CA cert for your CA to all client device so they trust this issuer.
- If both up options are not valid for you, what you can do is to configure every single client to ignore the untrusted cert and proceed with the connectoin. (This is a security concern though. not recommended unless really needed).
You must get a cert on the server and all clients must trust that certificate's issuer. Otherwise you'll not be able to user PEAP.
HTH
Amjad
Rating useful replies is more useful than saying "Thank you" -
Server 2008 R2 RADIUS Server with a Cisco Aironet 1040 Wireless AP
I am trying to get Server 2008 R2 RADIUS Server to work with a Cisco Aironet 1040 Wireless AP. I have installed the RADIUS server by MS standards and performed some searches on Google to configure the Cisco Aironet. I see others using a Wireless LAN Controller, which I do not have. I found this post below:
https://supportforums.cisco.com/discussion/11546056/wlc-2504-radius-2008-r2-server
But I have yet to locate a good step by step document on how to set it up and I have found so many different ways that others have set it up, but none have yet to work. I am having authentication issues that I have know of and I do not see any errors in the Windows Event Viewer and I do not know where the Acess Point stores it logs for any sort of error. Keep in mind this is the first time I am doing this. I do not have a Wireless LAN Controller and all my network / domain services are on individually built servers and not on one single server as I have seen with most of the documentation they all say the same thing by putting the Certificate Services, Domain Services (AD / ADS, etc), and NPS. I do not want that configuration and my setup should not be any different, but something is not right. I know from reading that this is not rocket science, but from someone who has never done it before this is difficult as I keep reading on and so many people do it different ways including what I have been reading according to what Cisco says to configure in the environment. Does anyone know where I can find good step by step documentation along with where I can look for logs on either device? I find that all the documentation I see on Cisco's website and from searching that it is old and outdated and not been updated in a long time so it is hard to determine what works and what does not work. I am stumped here and have been doing this for several weeks now with no luck. Thank you in advance.I did configure the Server 2008 R2 RADIUS Server using this video below:
https://www.youtube.com/watch?v=g-0MM_tK-Tk
I also referenced Technet to make sure it was configured correctly as well. I am still not sure if I am 100% setup correctly on the Windows Server side, but I for sure want to make sure I have the AP side setup correctly. Do you know of a better article for the Windows Server 2008 R2 setup? Does it matter that I do not have all the services installed on the same server? Instead I have them installed on multiple servers.
I have image number c1140-k9w7-tar.124.25d.JA1 on the AP. The part that confused me in that article, which I have seen before was the part about "Setting up access point must be configured in the authentication server as an AAA client." What is the AAA Client? I also am not aware of having Cisco Secure ACS anywhere built into the AP as that part through me off completely. Do I need to skip these steps? Thank you for help on this. -
Two WLC to the same NPS Radius (win 2008)
Hi everyone :
I have a WLC 2504 running with one SSID (authentication 802.1X to NPS radius win 2008 Server) , I have another branch with another WLC 2504.
Can I have configure the same SSID with the same NPS radiud win 2008 server in this another WLC 2504?? and How could I do it?
Regards,
Claudio L.Hi Scoott,
Thank you so much for your response.
I have used this guide to configure this deployment :
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bfb19a.shtml
In win 2008 server , I just only add the WLC like a new Radius Client ?
I mean ,
Frienly Name : WLC2
Address IP : 192.168.1.X
Vendor : Radius Standard
Share secret : xxxx
And That´s all, right ? -
Cisco WLC 5508
Software Version: 7.4.100.0
Windows Server 2008R2
I've got everything setup on the Windows Server 2008 side of things (certificates, radius clients, etc)
I added the radius server on the WLC, and configured a new WLAN to use it.
Both are on the same subnet.
When trying to conect to the WLAN it kept failing. I installed wireshark on the server to monitor the radius traffic, and to my surprise there was no radius traffic showing up on the server. The radius statistics on the WLC are at 0 as well, so it's like the WLC isn't even attempting Radius.
I reverified that the server was enabled on both the security tab and the WLAN itself on the WLC. Rebooted the controller and the server, all to no avail. I used a radius test client, and can successfully send radius commands to the server using that utility.
Frustrated, I just kept trying to reconnect on my wireless device, and after about the 15th try, finally I saw radius activity on wireshark. It rejected my access, but at least I saw activity. It also registerd radius statistcs on the WLC as well.
So now if I keep trying to connect repeatedly, about every dozen or so times the WLC actually will send a radius request to the server.
What in the world is going on here?I do have local management users on the controller.
Some hours later I added the option of authenticating management users, for the NPS server. Then logged inn to the management GUI using NPS radius, worked just fine.
However, these commands have been useful to me several times, to make sure unsuccessful requests appear in the Windows Event log:
auditpol /get /subcategory:"Network Policy Server"
If it shows ‘No auditing’ or just "Success", you can run this command to enable it:
auditpol /set /subcategory:"Network Policy Server" /success:enable /failure:enable
So now I know that the NPS radius server works, for management access. I will go to the customer's site some other day to test it for 802.1x authentication. If not, I'll do some debugging to decide wihich to blame - the WLC or NPS. -
Win 2008 R2 radius integration with WLC 5508
Requires help in integrating Win 2008 R2 Radius server with WLC 5508
Step by Step instructions - NPS & Wireless LAN Controller
PEAP Authentication - http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/115988-nps-wlc-config-000.html
EAP-TLS
https://kb.meraki.com/knowledge_base/radius-creating-a-policy-in-nps-to-support-eap-tls-authentication
hope that helps, Please let me know if you have any other questions in regards to setting up your NPS server
Please rate that post if it answers your question or helps you to resolve the problem. -
VLAN assignment without ACS on Cisco Wireless Controller 5508
I was wondering if it is possible to do dynamic VLAN assignment on the Cisco Wireless Controller 5508 without using Cisco ACS but use Microsoft NPS server instead? Is there a manual or article that someone can point me in the right direction?
Thank you!Any RADIUS server will allow you to do the dynamic vlan assignment if you configure the right RADIUS attributes (64, 65 and 81 that Steve mentioned above).
This doc shows example of dynamic vlan assignment with WLC and ACS.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml
Same config on WLC is needed. However, on the RADIUS you need to configure the same attributes on the NPS instead.
HTH
Amjad
Rating useful replies is more useful than saying "Thank you" -
Wireless Controller locking down User per SSID
I am using Wireless Controller 4112. We use WPA enterprise mode for authentication and encryption via Microsoft IAS server and MS AD domain.
My question is how to lock down a user to a specific SSID? I would guess that this is via some vendor specific radius attributes, am I right? And if so, what would be the name (and ID) for the attributes?
Thanks in advance.Making progress in setting up the wireless controller with multiple VLAN and WLAN/SSID. I create a virtaul interface at the controller and assign a VLAN number to it. The controller mgmt port is also set to a trunk port. Create a new SSID WLAN and have it mapped to the new virtual interface. Things work good.
The new problem I am trying to solve is how to prevent wired users to access the controller admin web interface via the virtual interface IP. I try create ACL and map it to the virtual interface. It doesn't seem working. -
AiroNet 1140 Authentication Issues Windows Server 2008 NPS
Hello,
We have an AiroNet 1140 AP that we are trying to configure RADIUS authentication. Our RADIUS server is a Microsoft Windows Server 2008 NPS server. Unfortunately, our Wi-Fi clients are unable to authenticate. We appear to have everything configured on the AP and RADIUS server correctly, but we receive the following errors from the debug on the AP. Doug
*Mar 14 05:46:58.413: RADIUS/DECODE: No response from radius-server; parse response; FAIL
*Mar 14 05:46:58.413: RADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response;
FAIL
*Mar 14 05:46:58.413: RADIUS/DECODE: No response from radius-server; parse response; FAIL
*Mar 14 05:46:58.413: RADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response;
FAILHi Steve, Here is the config for the AP. Some screenshots of the NPS config are below, too. Please let me know if you need more information from our NPS server. Thanks, Doug
ap#sh run
Building configuration...
Current configuration : 2971 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
logging rate-limit console 9
enable secret 5 $1$1IPZ$WkdzqdeeGvEPvQLCHfGXU.
aaa new-model
aaa group server radius rad_eap
server 10.20.2.96 auth-port 1645 acct-port 1646
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
server 10.20.2.96 auth-port 1645 acct-port 1646
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
dot11 syslog
dot11 ssid wifi
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
username pg_ap privilege 15 secret 5 $1$rg0/$hTYIn.lysNUfxhzxqXonl/
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid wifi
antenna gain 0
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7.
m8. m9. m10. m11. m12. m13. m14. m15.
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid wifi
antenna gain 0
dfs band 3 block
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11
. m12. m13. m14. m15.
channel dfs
station-role root access-point
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no keepalive
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.40.0.200 255.255.0.0
no ip route-cache
ip default-gateway 10.40.0.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server local
no authentication mac
nas 10.20.2.96 key 7 003555402B5F012F3D007B16062C46430759550B3A232F7E0A1636472C01402573
radius-server attribute 32 include-in-access-req format %h
radius-server host 10.20.2.96 auth-port 1645 acct-port 1646 key 7 08100A08261D0F3E202A3B5C251E677C26
677B1C171E08576F7A4C077F19403C337F0C7C7D035B172550305F756934172E327A1B13250C154D4C3F1319305C3514
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 0 4
end
ap# -
Config air-lap1041n-e-k9 with cisco 5500 (5508) series wireless controller. how to?
Hi!
I try to configure a Cisco 5508 Wireless controller and 25 Air-lap1041 to use as VoIP and data. I read documents, manuals, etc, but the AP doesn't charge the configuration, or not conect with the Wireless Controller, why? No Radius server present, only WPA security.howto, please...
I try to put a static ip in the LAP, with lwapp or capwap command, (LWAPP/CAPWAP ap ip address direccion mascara) and the AP returns "You should configure Domain and Name Server from controller CLI/GUI." and i can't change the name of the AP (Command is disabled).
Log from AP:
using ÿÿÿÿ ddr static values from serial eeprom
ddr init done
Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x83000800, 0xc0000000
RQDC, RFDC : 0x80000037, 0x00000184
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is NOT up.
PCIE1 port 1 not initialize
PCIEx: initialization done
flashfs[0]: 6 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 2369024
flashfs[0]: Bytes available: 30016000
flashfs[0]: flashfs fsck took 21 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 44:2b:03:dc:09:25
Ethernet speed is 1000 Mb - FULL duplex
Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...###########################
File "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" uncompressed and installed, entr
y point: 0x4000
executing...
enet halted
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1040 Software (C1140-RCVK9W8-M), Version 12.4(23c)JA, RELEA
SE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 01-Jun-10 12:53 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
flashfs[1]: 6 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32126976
flashfs[1]: Bytes used: 2369024
flashfs[1]: Bytes available: 29757952
flashfs[1]: flashfs fsck took 7 seconds.
flashfs[1]: Initialization complete.
flashfs[2]: 0 files, 1 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 11999232
flashfs[2]: Bytes used: 1024
flashfs[2]: Bytes available: 11998208
flashfs[2]: flashfs fsck took 1 seconds.
flashfs[2]: Initialization complete....done Initializing flashfs.
Ethernet speed is 1000 Mb - FULL duplex
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1041N-E-K9 (PowerPC405ex) processor (revision B0) with 98294K/32
768K bytes of memory.
Processor board ID FCZ1611W414
PowerPC405ex CPU at 333Mhz, revision number 0x147E
Last reset from reload
LWAPP image version 7.0.94.21
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 44:2B:03:DC:09:25
Part Number : 73-14034-04
PCA Assembly Number : 800-34273-05
PCA Revision Number : A0
PCB Serial Number : FOC16075VZ3
Top Assembly Part Number : 800-34284-03
Top Assembly Serial Number : FCZ1611W414
Top Revision Number : A0
Product/Model Number : AIR-LAP1041N-E-K9
% Please define a domain-name first.
Press RETURN to get started!
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:00:09.574: *** CRASH_LOG = YES
Base Ethernet MAC address: 44:2B:03:DC:09:25
*Mar 1 00:00:09.838: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log
(contains, 1024 messages)
*Mar 1 00:00:11.848: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
to up
*Mar 1 00:00:11.892: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-RCVK9W8-M), Version 12.4(23c)JA, RELEA
SE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 01-Jun-10 12:53 by prod_rel_team
*Mar 1 00:08:16.954: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to up
logging facility kern
^
% Invalid input detected at '^' marker.
*Mar 1 00:08:28.047: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER
*Mar 1 00:08:28.049: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:09:08.282: %CDP_PD-2-POWER_LOW: All radios disabled - LOW_POWER_CLASS
IC_NO_INJECTOR_CONFIGURED AIR-CT5508-K9 (c464.138f.9345)
*Mar 1 00:09:08.282: -Verify the required power-injector is installed on this
port: AIR-CT5508-K9(Gig 0/0/2).
*Mar 1 00:09:08.282: -If a power-injector is installed, issue the command:"pow
er inline negotiation injector installed"
*Mar 1 00:12:19.976: %CAPWAP-5-STATIC_TO_DHCP_IP: Could not discover WLC using
static IP. Forcing AP to use DHCP.
*Mar 1 00:12:29.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:12:39.994: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:12:49.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:12:59.994: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:13:09.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
Not in Bound state.
*Mar 1 00:13:19.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:13:19.993: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
logs from wireless controller:
(Cisco Controller) >show interface summary
Interface Name Port Vlan Id IP Address Type Ap Mgr Gu
est
ap-manager 2 untagged 209.165.200.231 Dynamic Yes No
management 1 untagged 209.165.200.230 Static Yes No
service-port N/A N/A 192.168.1.157 Static No No
virtual N/A N/A 1.1.1.1 Static No No
(Cisco Controller) >
i conect with service-port ok and the management port works, i think.
AP442b.03dc.0925>ping 209.165.200.230
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 209.165.200.230, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
AP442b.03dc.0925>
Help, please!
i write in spanish:
Hola:
Tengo que configurar un cisco 5508 wireless controller con 25 air-lap1041n, para usarlo como acceso de datos y voz. ¿Cómo lo hago? He leído manuales, y seguido las instrucciones, pero el punto de acceso parace que no es capaz de cargar el perfil. No hay servidor radius, solo la configuración de una clave wpa. Alguién me puede indicar pasos, GraciasHi!
I buy a gigabit switch. I connect the service-port to gigabit switch, and laptop to gigabit switch. I used 192.168.1.x ip address (192.168.1.157 to service-port and 192.168.1.233 to wired port on laptop, well, the laptop has two ip adress, 192.168.1.233 and 209.165.200.2, and the laptop works ok. Ping to 209.165.200.230 -ip address of management interface- and ping to 209.165.200.203 -ip address for AP, is assigned by DHCP of WLC. And i connect the ap to gigabit switch, and the wlc assigns well an ip direction.
I post the run-config and sysinfo log. The gigabit switch is tp-link model tl-sg1005d, no configuration.
Before the logs, I see this message from AP:
*Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
version 6.0.199.4 ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
Hola:
He comprado un switch gigabit. Conecto el service-port al switch gigabit y el portátil también (por cable). Uso como direcciones ip el rango 192.168.1.x (192.168.1.157 asignado al service-port y 192, 168.1.233 al portátil, bueno, el portátil tiene dos direcciones, la dicha anteriormente y la 209.165.200.2) El portátil funciona bien, hace ping al 209.165.200.230 - la ip de la management interface, y a 209.165.200.203 - ip asignada al AP por el DHCP del WLC. He conectado el AP al swtich gigabit, y el dhcp del wlc asigna correctamente una dirección ip.
Añado a continuación los resultados de los comandos "show run-config" y "show sysinfo". El switch es un TP-LINK modelo TL-S1005D, sin necesidad de configuración.
Antes de mostrar los resultados de los comandos, he visto el siguiente mensaje en el log del AP:
*Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
version 6.0.199.4 ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
Un saludo
Antonio R.
(Cisco Controller) >show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis" , DESCR: "Cisco Wireless Controller"
PID: AIR-CT5508-K9, VID: V02, SN: FCW1608L05X
Burned-in MAC Address............................ C4:64:13:8F:93:40
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
Press Enter to continue or to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.4
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console
1.27
Build Type....................................... DATA + WPS
System Name...................................... CISCO-CAPWAP-CONTROLLER
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 209.165.200.230
Last Reset....................................... Power on reset
System Up Time................................... 0 days 0 hrs 17 mins 45 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin,
Rome, Vienna
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... ES - Spain
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +36 C
External Temperature............................. +23 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0
Burned-in MAC Address............................ C4:64:13:8F:93:40
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
Press Enter to continue or to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Network Information
RF-Network Name............................. hosp
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Fast SSID Change ........................... Disabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
1 Normal Forw Enable Auto 1000 Full Up Enable N/A 1000BaseTX
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Disa Enable Auto Auto Down Enable N/A Not Present
4 Normal Disa Enable Auto Auto Down Enable N/A Not Present
5 Normal Disa Enable Auto Auto Down Enable N/A Not Present
6 Normal Disa Enable Auto Auto Down Enable N/A Not Present
7 Normal Disa Enable Auto Auto Down Enable N/A Not Present
8 Normal Disa Enable Auto Auto Down Enable N/A Not Present
Press Enter to continue or to abort
AP Summary
Number of APs.................................... 0
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location
Port Country Priority
Press Enter to continue or to abort
Press Enter to continue or to abort
AP Location
Site Name........................................ default-group
Site Description.................................
WLAN ID Interface Network Admission Control
1 management Disabled
AP Name Slots AP Model Ethernet MAC Location
Port Country Priority GroupName
Press Enter to continue or to abort
AP Config
Press Enter to continue or to abort
Press Enter to continue or to abort
AP Airewave Director Configuration
Press Enter to continue or to abort
802.11a Configuration
802.11a Network.................................. Disabled
11nSupport....................................... Enabled
802.11a Low Band........................... Enabled
802.11a Mid Band........................... Enabled
802.11a High Band.......................... Enabled
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
802.11n MCS Settings:
MCS 0........................................ Supported
MCS 1........................................ Supported
MCS 2........................................ Supported
MCS 3........................................ Supported
MCS 4........................................ Supported
MCS 5........................................ Supported
MCS 6........................................ Supported
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
MCS 7........................................ Supported
MCS 8........................................ Supported
MCS 9........................................ Supported
MCS 10....................................... Supported
MCS 11....................................... Supported
MCS 12....................................... Supported
MCS 13....................................... Supported
MCS 14....................................... Supported
MCS 15....................................... Supported
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Disabled
Priority 4............................... Disabled
Priority 5............................... Disabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Beacon Interval.................................. 100
CF Pollable mandatory............................ Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
CFP Maximum Duration............................. 60
Default Channel.................................. 36
Default Tx Power Level........................... 0
DTPC Status..................................... Enabled
Fragmentation Threshold.......................... 2346
TI Threshold..................................... -50
Legacy Tx Beamforming setting.................... Disabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admision Control (CAC) configuration
Voice AC:
Voice AC - Admission control (ACM)............ Disabled
Voice max RF bandwidth........................ 75
Voice reserved roaming bandwidth.............. 6
Voice load-based CAC mode..................... Disabled
Voice tspec inactivity timeout................ Disabled
Voice Stream-Size............................. 84000
Voice Max-Streams............................. 2
Video AC:
Video AC - Admission control (ACM)............ Disabled
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
Video max RF bandwidth........................ Infinite
Video reserved roaming bandwidth.............. 0
Press Enter to continue or to abort
802.11a Advanced Configuration
Press Enter to continue or to abort
802.11a Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
TxPower Update Logging......................... Off
Default 802.11a AP performance profiles
802.11a Global Interference threshold.......... 10 %
802.11a Global noise threshold................. -70 dBm
802.11a Global RF utilization threshold........ 80 %
802.11a Global throughput threshold............ 1000000 bps
802.11a Global clients threshold............... 12 clients
Default 802.11a AP monitoring
802.11a Monitor Mode........................... enable
802.11a Monitor Mode for Mesh AP Backhaul...... disable
802.11a Monitor Channels....................... Country channels
802.11a AP Coverage Interval................... 180 seconds
802.11a AP Load Interval....................... 60 seconds
802.11a AP Noise Interval...................... 180 seconds
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
802.11a AP Signal Strength Interval............ 60 seconds
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -70 dBm
Transmit Power Neighbor Count.................. 3 APs
Min Transmit Power............................. -10 dBm
Max Transmit Power............................. 30 dBm
Transmit Power Update Contribution............. SNI.
Transmit Power Assignment Leader............... c4:64:13:8f:93:40
Last Run....................................... 75 seconds ago
Coverage Hole Detection
802.11a Coverage Hole Detection Mode........... Enabled
802.11a Coverage Voice Packet Count............ 100 packets
802.11a Coverage Voice Packet Percentage....... 50%
802.11a Coverage Voice RSSI Threshold.......... -80 dBm
802.11a Coverage Data Packet Count............. 50 packets
802.11a Coverage Data Packet Percentage........ 50%
802.11a Coverage Data RSSI Threshold........... -80 dBm
802.11a Global coverage exception level........ 25 %
802.11a Global client minimum exception lev.... 3 clients
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
--More or (q)uit current module or to abort
Channel Update Interval........................ 600 seconds [startup]
Anchor time (Hour of the day).................. 0
Channel Update Contribution.................... SNI.
Channel Assignment Leader...................... c4:64:13:8f:93:40
Last Run....................................... 75 seconds ago
DCA Sensitivity Level.......................... STARTUP (5 dB)
DCA 802.11n Channel Width...................... 20 MHz
DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
802.11a 5 GHz Auto-RF Channel List
Allowed Channel List......................... 36,40,44,48,52,56,60,64
Unused Channel List.......................... 100,104,108,112,116,120,124,
128,132,136,140
DCA Outdoor AP option.......................... Disabled
Radio RF Grouping
802.11a Group Mode............................. AUTO
--More or (q)uit current module or to abort
802.11a Group Update Interval.................. 600 seconds
802.11a Group Leader........................... c4:64:13:8f:93:40
802.11a Group Member......................... c4:64:13:8f:93:40
802.11a Last Run............................... 75 seconds ago
802.11b Configuration
802.11b Network.................................. Enabled
11gSupport....................................... Enabled
11nSupport....................................... Enabled
802.11b/g Operational Rates
802.11b/g 1M Rate............................ Mandatory
802.11b/g 2M Rate............................ Mandatory
802.11b/g 5.5M Rate.......................... Mandatory
802.11b/g 11M Rate........................... Mandatory
802.11g 6M Rate.............................. Supported
802.11g 9M Rate.............................. Supported
802.11g 12M Rate............................. Supported
802.11g 18M Rate............................. Supported
802.11g 24M Rate............................. Supported
802.11g 36M Rate............................. Supported
802.11g 48M Rate............................. Supported
802.11g 54M Rate............................. Supported
802.11n MCS Settings:
MCS 0........................................ Supported
MCS 1........................................ Supported
MCS 2........................................ Supported
MCS 3........................................ Supported
MCS 4........................................ Supported
--More or (q)uit current module or to abort
MCS 5........................................ Supported
MCS 6........................................ Supported
MCS 7........................................ Supported
MCS 8........................................ Supported
MCS 9........................................ Supported
MCS 10....................................... Supported
MCS 11....................................... Supported
MCS 12....................................... Supported
MCS 13....................................... Supported
MCS 14....................................... Supported
MCS 15....................................... Supported
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Disabled
Priority 4............................... Disabled
Priority 5............................... Disabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Beacon Interval.................................. 100
CF Pollable mode................................. Disabled
--More or (q)uit current module or to abort
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 1
Default Tx Power Level........................... 0
DTPC Status..................................... Enabled
Call Admission Limit ........................... 105
G711 CU Quantum ................................. 15
ED Threshold..................................... -50
Fragmentation Threshold.......................... 2346
PBCC mandatory................................... Disabled
RTS Threshold.................................... 2347
Short Preamble mandatory......................... Enabled
Short Retry Limit................................ 7
Legacy Tx Beamforming setting.................... Enabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
Faster Carrier Tracking Loop..................... Disabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admision Control (CAC) configuration
Voice AC - Admission control (ACM)............ Disabled
--More or (q)uit current module or to abort
Voice Stream-Size............................. 84000
Voice Max-Streams............................. 2
Voice max RF bandwidth........................ 75
Voice reserved roaming bandwidth.............. 6
Voice load-based CAC mode..................... Disabled
Voice tspec inactivity timeout................ Disabled
Video AC - Admission control (ACM)............ Disabled
Video max RF bandwidth........................ 50
Video reserved roaming bandwidth.............. 0
802.11b Advanced Configuration
Press Enter to continue or to abort
802.11b Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
Transmit Power Update Logging.................. Off
Default 802.11b AP performance profiles
802.11b Global Interference threshold.......... 10 %
802.11b Global noise threshold................. -70 dBm
802.11b Global RF utilization threshold........ 80 %
802.11b Global throughput threshold............ 1000000 bps
802.11b Global clients threshold............... 12 clients
Default 802.11b AP monitoring
802.11b Monitor Mode........................... enable
802.11b Monitor Channels....................... Country channels
802.11b AP Coverage Interval................... 180 seconds
802.11b AP Load Interval....................... 60 seconds
802.11b AP Noise Interval...................... 180 seconds
802.11b AP Signal Strength Interval............ 60 seconds
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -70 dBm
Transmit Power Neighbor Count.................. 3 APs
Min Transmit Power............................. -10 dBm
Max Transmit Power............................. 30 dBm
Transmit Power Update Contribution............. SNI.
Transmit Power Assignment Leader............... c4:64:13:8f:93:40
Last Run....................................... 213 seconds ago
Coverage Hole Detection
802.11b Coverage Hole Detection Mode........... Enabled
802.11b Coverage Voice Packet Count............ 100 packets
802.11b Coverage Voice Packet Percentage....... 50%
802.11b Coverage Voice RSSI Threshold.......... -80 dBm
802.11b Coverage Data Packet Count............. 50 packets
802.11b Coverage Data Packet Percentage........ 50%
802.11b Coverage Data RSSI Threshold........... -80 dBm
802.11b Global coverage exception level........ 25 %
802.11b Global client minimum exception lev.... 3 clients
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
Channel Update Interval........................ 600 seconds [startup]
Anchor time (Hour of the day).................. 0
Channel Update Contribution.................... SNI.
Channel Assignment Leader...................... c4:64:13:8f:93:40
Last Run....................................... 213 seconds ago
DCA Sensitivity Level: ...................... STARTUP (5 dB)
DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
802.11b Auto-RF Allowed Channel List........... 1,6,11
Auto-RF Unused Channel List.................... 2,3,4,5,7,8,9,10,12,13
Radio RF Grouping
802.11b Group Mode............................. AUTO
802.11b Group Update Interval.................. 600 seconds
802.11b Group Leader........................... c4:64:13:8f:93:40
802.11b Group Member......................... c4:64:13:8f:93:40
802.11b Last Run............................... 213 seconds ago
Mobility Configuration
Symmetric Mobility Tunneling (current) .......... Enabled
Symmetric Mobility Tunneling (after reboot) ..... Enabled
Mobility Protocol Port........................... 16666
Default Mobility Domain.......................... hosp
Multicast Mode .................................. Disabled
Mobility Domain ID for 802.11r................... 0x97e2
Mobility Keepalive Interval...................... 10
Mobility Keepalive Count......................... 3
Mobility Group Members Configured................ 1
Mobility Control Message DSCP Value.............. 0
Controllers configured in the Mobility Group
MAC Address IP Address Group Name Multicast
IP Status
c4:64:13:8f:93:40 209.165.200.230 hosp 0.0.0.0
Up
Advanced Configuration
Probe request filtering.......................... Enabled
Probes fwd to controller per client per radio.... 0
Probe request rate-limiting interval............. 500 msec
EAP-Identity-Request Timeout (seconds)........... 30
EAP-Identity-Request Max Retries................. 2
EAP Key-Index for Dynamic WEP.................... 0
EAP Max-Login Ignore Identity Response........... enable
EAP-Request Timeout (seconds).................... 30
EAP-Request Max Retries.......................... 2
EAPOL-Key Timeout (milliseconds)................. 1000
EAPOL-Key Max Retries............................ 2
dot11-padding.................................... Disabled
Authentication Response Timeout (seconds)........ 10
Rogue Entry Timeout (seconds).................... 1200
AP Heart Beat Timeout (seconds).................. 30
AP Discovery Timeout (seconds)................... 10
AP Local mode Fast Heartbeat (seconds)........... disable
AP Hreap mode Fast Heartbeat (seconds)........... disable
AP Primary Discovery Timeout (seconds)........... 120
AP Primed Join Timeout (seconds)................. 0
Packet Forwarding watchdog timer (seconds)....... 240 (enable)
Location Configuration
RFID Tag data Collection......................... Enabled
RFID timeout.................................... 1200 seconds
RFID mobility.................................... Oui:00:14:7e : Vendor:pango S
tate:Disabled
Interface Configuration
Interface Name................................... management
MAC Address...................................... c4:64:13:8f:93:40
IP Address....................................... 209.165.200.230
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 209.165.200.1
External NAT IP State............................ Disabled
External NAT IP Address.......................... 192.168.1.1
VLAN............................................. untagged
Quarantine-vlan.................................. 0
Active Physical Port............................. 1
Primary Physical Port............................ 1
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 209.165.200.230
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No
Interface Name................................... service-port
MAC Address...................................... c4:64:13:8f:93:41
IP Address....................................... 192.168.1.157
IP Netmask....................................... 255.255.255.0
DHCP Option 82................................... Disabled
DHCP Protocol.................................... Disabled
AP Manager....................................... No
Guest Interface.................................. No
Interface Name................................... virtual
MAC Address...................................... c4:64:13:8f:93:40
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No
WLAN Configuration
WLAN Identifier.................................. 1
Profile Name..................................... HOSP3C
Network Name (SSID).............................. HOSP3C
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
NAC-State...................................... Disabled
Quarantine VLAN................................ 0
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
WLAN ACL......................................... unconfigured
DHCP Server...................................... 209.165.200.230
DHCP Address Assignment Required................. Enabled
Quality of Service............................... Platinum (voice)
Scan Defer Priority.............................. 5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... 802.11b and 802.11g only
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Disabled
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT(802.11r)............................. Disabled
FT-PSK(802.11r)......................... Disabled
FT Reassociation Timeout......................... 20
FT Over-The-Air mode............................. Enabled
FT Over-The-Ds mode.............................. Enabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
H-REAP Local Switching........................ Disabled
H-REAP Learn IP Address....................... Enabled
Infrastructure MFP protection................. Enabled
Client MFP.................................... Optional
Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Band Select...................................... Enabled
Load Balancing................................... Enabled
Mobility Anchor List
WLAN ID IP Address Status
Press Enter to continue or to abort
Press Enter to continue or to abort
ACL Configuration
Press Enter to continue or to abort
CPU ACL Configuration
CPU Acl Name................................ NOT CONFIGURED
Wireless Traffic............................ Disabled
Wired Traffic............................... Disabled
RADIUS Configuration
Vendor Id Backward Compatibility................. Disabled
Call Station Id Case............................. lower
Call Station Id Type............................. IP Address
Aggressive Failover.............................. Enabled
Keywrap.......................................... Disabled
Fallback Test:
Test Mode.................................... Off
Probe User Name.............................. cisco-probe
Interval (in seconds)........................ 300
MAC Delimiter for Authentication Messages........ hyphen
MAC Delimiter for Accounting Messages............ hyphen
Authentication Servers
Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/P
hase1/Group/Lifetime/Auth/Encr
Accounting Servers
Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/P
hase1/Group/Lifetime/Auth/Encr
--More or (q)uit current module or to abort
TACACS Configuration
Authentication Servers
Idx Server Address Port State Tout
Authorization Servers
Idx Server Address Port State Tout
Accounting Servers
Idx Server Address Port State Tout
LDAP Configuration
Press Enter to continue or to abort
Local EAP Configuration
User credentials database search order:
Primary ..................................... Local DB
Timer:
Active timeout .............................. 300
Configured EAP profiles:
EAP Method configuration:
EAP-FAST:
Server key ................................
TTL for the PAC ........................... 10
Anonymous provision allowed ............... Yes
Authority ID .............................. 436973636f00000000000000000000
00
Authority Information ..................... Cisco A-ID
Press Enter to continue or to abort
HREAP Group Summary
HREAP Group Summary: Count: 0
Group Name # Aps
Press Enter to continue or to abort
HREAP Group Detail
Press Enter to continue or to abort
Route Info
Number of Routes................................. 0
Destination Network Netmask Gateway
Press Enter to continue or to abort
Qos Queue Length Info
Platinum queue length............................ 100
Gold queue length................................ 75
Silver queue length.............................. 50
Bronze queue length.............................. 25
Press Enter to continue or to abort
Mac Filter Info
Press Enter to continue or to abort
Authorization List
Authorize MIC APs against AAA ................... disabled
Authorize LSC APs against Auth-List ............. disabled
Allow APs with MIC - Manufactured Installed C.... disabled
Allow APs with SSC - Self-Signed Certificate..... disabled
Allow APs with LSC - Locally Significant Cert.... disabled
Load Balancing Info
Aggressive Load Balancing........................ Disabled
Aggressive Load Balancing Window................. 5 clients
Aggressive Load Balancing Denial Count........... 3
Statistics
Total Denied Count............................... 0 clients
Total Denial Sent................................ 0 messages
Exceeded Denial Max Limit Count.................. 0 times
None 5G Candidate Count.......................... 0 times
None 2.4G Candidate Count........................ 0 times
Press Enter to continue or to abort
Dhcp Scope Info
Scope: PUNTOSAP
Enabled.......................................... Yes
Lease Time....................................... 86400 (1 day )
Pool Start....................................... 209.165.200.201
Pool End......................................... 209.165.200.229
Network.......................................... 209.165.200.0
Netmask.......................................... 255.255.255.0
Default Routers.................................. 0.0.0.0 0.0.0.0 0.0.0.0
DNS Domain.......................................
DNS.............................................. 0.0.0.0 0.0.0.0 0.0.0.0
Netbios Name Servers............................. 0.0.0.0 0.0.0.0 0.0.0.0
Press Enter to continue or to abort
Exclusion List ConfigurationUnable to retrieve exclusion-list entry
Press Enter to continue or to abort
CDP Configuration
Press Enter to continue or to abort
Country Channels Configuration
Configured Country............................. ES - Spain
KEY: * = Channel is legal in this country and may be configured manually.
A = Channel is the Auto-RF default in this country.
. = Channel is not legal in this country.
C = Channel has been configured for use by Auto-RF.
x = Channel is available to be configured for use by Auto-RF.
(-,-) = (indoor, outdoor) regulatory doamin allowed by this country.
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11bg :
Channels : 1 1 1 1 1
: 1 2 3 4 5 6 7 8 9 0 1 2 3 4
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
ES (-E ,-E ): A * * * * A * * * * A * * .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11a : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Channels : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
: 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
ES (-E ,-E ): . A . A . A . A A A A A * * * * * * * * * * * . . . . .
Press Enter to continue or to abort
WPS Configuration Summary
Auto-Immune
Auto-Immune.................................... Disabled
Client Exclusion Policy
Excessive 802.11-association failures.......... Enabled
Excessive 802.11-authentication failures....... Enabled
Excessive 802.1x-authentication................ Enabled
IP-theft....................................... Enabled
Excessive Web authentication failure........... Enabled
Signature Policy
Signature Processing........................... Enabled
Press Enter to continue or to abort
Custom Web Configuration
Radius Authentication Method..................... PAP
Cisco Logo....................................... Enabled
CustomLogo....................................... None
Custom Title..................................... None
Custom Message................................... None
Custom Redirect URL.............................. None
Web Authentication Type.......................... Internal Default
External Web Authentication URL.................. None
Configuration Per Profile:
Rogue AP Configuration
Rogue Location Discovery Protocol................ Disabled
Rogue on wire Auto-Contain....................... Disabled
Rogue using our SSID Auto-Contain................ Disabled
Valid client on rogue AP Auto-Contain............ Disabled
Rogue AP timeout................................. 1200
MAC Address Classification # APs # Clients Last Heard
Adhoc Rogue Configuration
Detect and report Ad-Hoc Networks................ Enabled
Auto-Contain Ad-Hoc Networks..................... Disabled
Client MAC Address Adhoc BSSID State # APs Last Heard
Rogue Client Configuration
Validate rogue clients against AAA............... Disabled
Rogue Client Configuration
Validate rogue clients against AAA............... Disabled
--More-- or (q)uit
MAC Address State # APs Last Heard
Ignore List Configuration
MAC Address
Rogue Rule Configuration
Priority Rule Name State Type Match Hit Count
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.4
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console
1.27
Build Type....................................... DATA + WPS
System Name...................................... CISCO-CAPWAP-CONTROLLER
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 209.165.200.230
Last Reset....................................... Power on reset
System Up Time................................... 0 days 0 hrs 41 mins 2 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin,
Rome, Vienna
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... ES - Spain
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +39 C
External Temperature............................. +23 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0
Burned-in MAC Address............................ C4:64:13:8F:93:40
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
(Cisco Controller) >
The AP log
AP442b.03dc.0925>
*Apr 19 23:10:18.428: %CAPWAP-3-ERRORLOG: Selected MWAR 'CISCO-CAPWAP-CONTROLLER
'(index 0).
*Apr 19 23:10:18.428: %CAPWAP-3-ERRORLOG: Go join a capwap controller
logging facility kern
^
% Invalid input detected at '^' marker.
logging facility kern
^
% Invalid input detected at '^' marker.
*Apr 19 23:10:19.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 209.165.200.230 peer_port: 5246
*Apr 19 23:10:19.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 19 23:10:20.200: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
peer_ip: 209.165.200.230 peer_port: 5246
*Apr 19 23:10:20.201: %CAPWAP-5-SENDJOIN: sending Join Request to 209.165.200.23
0
*Apr 19 23:10:20.201: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
version 6.0.199.4 ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
*Apr 19 23:10:20.354: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Apr 19 23:10:20.355: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 209
.165.200.230:5246
*Apr 19 23:10:20.356: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 19 23:10:20.356: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 19 23:10:20.412: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
not established
Maybe you are looking for
-
Not able to close asset fiscal yearar
Hi, Not able to close fiscal year in asset accounting for multiple company codes. In OAAQ asset closed year is 2010 at company code level but in OAAR for depreciation areas there are different closed fiscal years for the same company code. For deprec
-
Oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared ob
Hi, I'm installing Oracle 9i on IA 64, OS linux. I keep getting the following error when I run sqlplus oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared object file: No such file or directory ERROR: ORA-24314: service
-
Error while Updating build 10049 to 10074
Hi, currently build 10049 is installed and I want to update to build 10074. While downloading und preparing everything is find, but while installing the new build after the reboot there is an error. The installation aborts at 1%. After that, the PC r
-
How to request - Updating an embedded image in a PDF using Actions but not all actions are recorded
i am trying to create an Action in CS3 but some of my actions are not been recorded. What i want to do is run the Batch option on a folder with a 1,000 PDFs in it. The PDFs (which were created in Illustrator CS3) consist of a single page with a singl
-
Possible bug with HTML emails and attachments from Mail.app
I'm trying to send an attachment with an HTML email from Mail.app and getting unexpected results. I've been messing around with the order that things get added to the new e-mail and it seems that I can have either an attachment or I can have HTML ema