Microsoft Azure for machine learning on data collected from microsoft spectrum observatory

Dear Sir,
Can any one please suggest how shall I apply Microsoft Azure for applying machine learning techniques on spectrum data available from Microsoft spectrum observatory . Please send a mail.
Regards,
pavan

Hi Pavan!
Apologies, I'm not familiar with MSO - how are you collecting the data provided there? Is there an API? Do you have access to the raw data?
Regards,
AK

Similar Messages

Campus Manager No Data Collected from Network

Just intergraged CiscoWorks with ACS. Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
No Data Collected from Network
1.Devices are not availiable from DCR or
2.You have not performed data collection at least once
When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
We could see devices fine before the ACS intergration but now, we cannot see any devices.
Any thoughts?

The devices (original clients) that I defined are as follows:
10.0.1.*
10.0.10.*
10.0.2.*
I was able to see these clients. Deleted the above clients from ACS and added:
10.0.1-10.*
So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
I can still see the original clients only. The others show up in Devices not configured in ACS report.
What do I need to do? What did I miss?

Reference for working with a data collection retreived from a Web Service

Does anyone have a good resource / example of working with multi row data collections returned from a web service call?
In addition to the basic return of x data rows, I will also be getting parent child collections. For example,
for each Customer row, 0 or more Customer Invoices
I have found many guides the relate to single values being retrieved by the web service, but I have not found any that refer to data collections.
Best regards,
Thomas

That can all certainly be done with a 13" MBP.
You'd want to get a USB hub, preferably USB 3.0 to plug in your optical drive, keyboard and mouse.
For your external monitor you can use a Mini DisplayPort adapter to DVI or HDMI (or if it's a retina MBP use the HDMI out).
For your ethernet, it will plug right into the non-retina. If you get the retina, you'd need a Thunderbolt to Ethernet adapter (faster) or a USB to ethernet adapter (slower).

Test Run - L1 and L2 Regularization for Machine Learning

James McCaffrey looks at how regularization can help to reduce overfitting, a common result of machine learning that undermines the predictive accuracy of the model.
Read the article

Hi,
Jaya and I discussed this and there are a couple of issues that may be the problem in your case:
Filter selection might be selecting different features in the training and scoring experiment. Try removing filter based feature selection module.
Feature hashing preserves the original text features causing the input dimension to increase considerably. Try removing the original text column using "Project Columns" module (after "Feature Hashing" and prior to "Train")
Limit the size of the model (there's a limitation on operationalizable models) by restricting hashing bits (say 10-12 bits)
Here's a screen shot of scoring experiments (where I restricted to 10 bits)
regards
Sharat

Tables for fields for machine wise production data

PP gurus,
Plz let me know abt the tables for fields
machine code
quantity poduced
quantity rework
quantity rejected
no of settings
hours available
hours produced
time per setup(in minutes)
segemnt
Plz let me know all dse ASAP.
regards,

Sudha,
AFRC                           Incorrect cost calculations from confirmat
AFRD                           Default values for collective confirmation
AFRH                           Header information for confirmation pool
AFRP0                          Table of planned changes for confirmation
AFRP1                          Table of planned changes to conf.: Automat
AFRP2                          Table of planned changes for confirmation:
AFRP3                          Table of planned changes for confirmation:
AFRP4                          Table of planned changes to confirmatn: Da
AFRU                           Order Confirmations
AFRUHR                         Order Confirmations for HR
AFRV                           Confirmation pool
AFRV_DEL                       Backup Copy for Confirmation Pool
Regards,
Prasobh

I would like to learn how to search in database (data collected from users)

Where can I find learning material ?
Are there any code examples?

As I do not know your skill level I will start with - http://www.adobe.com/devnet/dreamweaver/application_development.html#php
for general info.
More advanced - http://www.devshed.com/c/a/MySQL/Building-a-Search-Engine-with-MySQL-and-PHP-5/2/
PZ

Data collection from 3 different hardwares

Hello Friends,
Actually I want such vi in which = when program starts execution it should record raw data available on GPIB port and then send a command on TCP/IP (i.e., Ethernet card) to move the stage. After movement of stage, it should again get the data from GPIB.
Now here what actually I want is, How I should write program in which this is satisfied.
Here I'll require
Write data to spreadsheet,
wait for some execution to be done
Read data from spreadsheet,
Save both data available before and after movement of stage,
and accordingly It should plot the graph of both datas.
Thank you.
Tanmaya

Sounds like a case for a state machine architecture.
http://zone.ni.com/devzone/conceptd.nsf/webmain/c74cec177a289dbd86256c4e00600196
http://sine.ni.com/apps/utf8/niepd_web_display.display_epd4?p_guid=B45EACE3E1E956A4E034080020E74861

GAIN PHASE Data collection from HP4194 using a GPIB card?

I'm trying to collect gain and phase data on a HP4194 using a GPIB card. I'd like to collect this data and run it to an MS Excel spreadsheet. Does any one have any VI's that do this??? So far, I haven't been able to find any commands that read each of the 401 elements to labview.
HERE'S AN EXAMPLE OF DATA I WANT TO READ:
http://www.tec.ufl.edu/~shailu/labview/4194a/4-pt/505/II/archive/pxfn1.txt
Please email me at [email protected], if you have a solution. Thanks.

That sounds like a bit of LabVIEW coding. Here's some resource that will help:
-The instrument driver for this device is available at ni.com/idnet.
-LabVIEW has a WriteToSpreadSheet.vi on the File I/O function pallete.
-The Programmer's Reference for the 4194 gives the strings to send of the GPIB bus.
Randy Solomonson
Application Engineer
National Instruments

Can I load data collected from one form, into a new form?

I have created an Employment Application which collects pre-employment data for our prospective employees. I would like to be able to load that data into an Employee Packet once the decision is made to hire the prospect. Is that possible?

Are you using a PDF form, and if so, do you have Acrobat?

Can we create a pdf using data collected from a forms central form?

I have a form in Forms Central that is collecting data and I want to take the data and merge the fields into a pdf document with merge fields. Then send the completed merged pdf to someone else automatically?

Hi,
Kindly post your query in FormsCentral forums:https://forums.adobe.com/community/formscentral
Regards,
Florence

How to listen out for a stream of data coming from (web)server

Hello
I have an applet that connects to a server (same location as web server) and connects to a server on a socket. This all works fine for sending commands to this server. But the server can send data to the client at any moment in time. So how do I listen out for the activity? do I launch a separate thread that sits listening for incoming data?
What is the way to do it?
Angus

Check out my InfoFetcher class
http://forum.java.sun.com/thread.jspa?threadID=750441&messageID=4291848

Search script generator for all objects and data (!) from a user/schema ?

Is there a way to create a script which (when run) creates all the existing
TABLES; INDEXES, KEYS and DATA for a specified user/schema ?
This (PL-)SQL script should contain all INSERTS for the currently existing rows of
all the TABLEs.
When I use e.g. export to Dumpfile I have at first find all TABLEs and components
which I want to dump. This is rather uncomfortable.
I just want to specify the user name similar to
createscript user=karl@XE outfile=D:\mydata\myscript.sql
Is this somehow possible ?

So that I understand your requirements exactly, are you asking for your script to ...
1/ export from database A the entire schema of a specified user
2/ drop all objects owned by that user in database B
3/ import the objects from database A into database B
If so, it sounds to me that a shell script that does a schema level export as Nicholas suggested, and then drops the user from database B using the cascade keyword (e.g. drop user username cascade), recreates the user and then imports the export file into B should do the trick.
I don't think searching for individual tables and creating the statements to recreate them is the best idea.
Hope that helps
Graham

LiveCycle: Online data collection from PDF to RSS feed

Is there any resource anywhere that anyone could possibly point me to that will help me understand how to extract data from a on-line PDF form (posted at our web site) and push that data to our RSS feed?
I have been searching for anything along this line for most of the day and am not able find anything even remotely similar.
All help is very much...did I say Very Much?...appreciated...
Thanks...

Is the form being returned as a pdf or xml? You can distribute the form, which will set up a pdf portfolio for your returned forms. When forms are returned via email, you double click on the attachment and it puts into the portfolio. From the portfolio you can export one or more forms (data) into an excel file.
To export the whole form, click on File, Export and choose the file type you want. However, if you just want the form data, I would suggest you distribute the form to create the pdf portfolio for that.

How to load data for attribute of Master Data Object from PSA

Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSA

Jr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help

Peformance data collection from SUN ZFS storage

Hi,
We will be doing a performance load tests on couple of ZFS 7420 soon. what all the performance data needs collected and how?
I am pretty new with this(SUN) line of products and tools. what will you do in those scenario as performance experts?

1) It would certainly be faster as it does not have large ethernet/tcpip overheads.
2) LUNs can be created on the same pool as your existing NAS shares.
3) You can test out with iSCSI, but performance wise it would be very close to your existing NAS. You might want to try to LACP a couple of network ports dedicated to iSCSI.

Microsoft Azure for machine learning on data collected from microsoft spectrum observatory

Similar Messages

Maybe you are looking for