Microsoft Baseline Configuration Analzyer 2.0 not working

We have a SBS 2003 and would like to perform a swing Migration to SBS 2011. We are following the guide at
http://technet.microsoft.com/de-de/library/gg563799.aspx. Unfortunately, we can't get the "Microsoft Baseline Configuration Analyser 2.0" to run. The dropdown for "Select
a product" is blank and the "Start scan" is greyed out.
We have also installed SBS Best Practices Analyzer Tool. We have deinstalled and reinstalled both Tools.
Any ideas?

Did you install Microsoft PowerShell 2.0 first? Try rebooting also. This link has links to more detailed guides based on the MS one that may help:
http://blog.mpecsinc.ca/2011/05/sbs-2003-to-sbs-2011-migration-guide.html
-- Al

Similar Messages

SQL 2012 Best Practice Analyzer issue with nothing available in pulldown on Microsoft Baseline Configuration Analyzer V2.0

We have tried using both a Windows 7 and a Windows 8 machine and still cannot see any items available in the pulldown (ie. no sql 2012 or anything) Is this a known issue and BPA does not work for SQL 2012? Any suggestions? I've seen several
posts with the same issue but, no resolution.
Laura

Hi Laura,
I installed Microsoft Baseline Configuration Analyzer 2.0 successfully. I can select a product: SQL Server 2012 BPA. Do you mean this?
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support

Microsoft Jet OLEDB 4.0 STILL not working on 64-Bit?

I've seen all the posts (hundreds of them) concerning the fact that the Microsoft Jet OLEDB 4.0 provider only works on 32-Bit systems. Really? I'm running Windows Server 2008 Data Center and have an urgent need to run an SQL Job that needs to query an Access database. The job runs DTExec to execute an SSIS package (the Job step is configured with the "Use 32 bit runtime" checked (set to true)). I am getting the follwing error message when I'm on the part of the SSIS package, which is an 'Execute SQL Task', which attempts to open the Access Database:
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:31:08 PM
Finished: 2:31:12 PM
Elapsed: 4.438 seconds
Microsoft (R) SQL Server Execute Package Utility
Version 10.0.1787.0 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 2:37:14 PM
Error: 2009-04-30 14:37:19.13
   Code: 0xC002F210
   Source: DoDeletes Execute SQL Task
   Description: Executing the query "DELETE From [dbo].[zsong] where [MUZENBR] in (
SE..." failed with the following error: "The OLE DB provider "Microsoft.Jet.OLEDB.4.0" has not been registered.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:37:14 PM
Finished: 2:37:19 PM
Elapsed: 4.422 seconds
I find it highly ridiculous that Microsoft would not care to release a 64-bit driver for Jet OleDb 4.0. There is obviously a need, judging by the hundreds of posts out there with people asking about this.
Or am I missing something? Is there a driver that I just can't find?
Thanks.

The Jet OLEDB provider consists of several dlls. You can check if these dlls are installed.
For x64 machines, the 32-bit folder where I expect they live is C:\Windows\Syswow64 or C:\Winnt\Syswow64
This list (taken from http://support.microsoft.com/kb/278604) seems to cover the Jet dlls:
Microsoft Jet 4.0 OLE DB Provider
Provider=Microsoft.Jet.OLEDB.4.0
C:\WINNT\System32\Msjetoledb40.dll
C:\WINNT\System32\Msjet40.dll
C:\WINNT\System32\Mswstr10.dll
C:\WINNT\System32\Msjter40.dll
C:\WINNT\System32\Msjint40.dll
This article tells how to see if Jet is installed, and which version is installed, and how to get the latest service pack 8 http://support.microsoft.com/kb/239114/
However, that kb 239114 it says "For computers that are running Windows Server 2008"
If you are running Windows Server 2008, you have a later version of Jet 4.0 than the version that is included with Jet 4.0 SP8.
If you don't find Jet is installed correctly, I am not totally sure what to do - sounds like Windows is not installed completely, or the feature was not enabled in the add/remove windows components.
Indeed Jet is only 32-bit as Todd mentioned http://support.microsoft.com/kb/957570
Since Jet is included with the OS I expect the install to have been done by one of the *.inf files in the C:\Windows\inf. I found several inf files on my Win 7 machine (not a good comparison for you) which cover these dlls such as (syssetup.inf, layout.inf, oem33.inf). I know it is possible to right click and run the install on these .inf files, but since its a windows component, it would be reinstalling windows components too, which I would recommend against on a production server, escpecially a datacenter edition! Must be a high end production server, so I can't recommend you do that because I'm afraid it would break something else because I haven't tested it before.
Let us know if you find the dlls or not.
Best wishes, JasonHDidn't get enough help here? Submit a case with the Microsoft Customer Support team for deeper investigation - http://support.microsoft.com/select/default.aspx?target=assistance

Conversion of Microsoft Word 2010 to PDF-Links not working in the PDF

I have a Windows 7 Professional 64 Bit Operating System and Microsoft Word 2010. There is a particular word document(Word 2010) that I need to convert to PDF.I did a "save as" and stored it as a PDF. But the issue in the PDF is that the links in the "Table of Contents" do NOT work. I am using Adobe Reader 10.1.2.Please let me know how could I do the conversion and how can the links work correctly

Adobe Reader 10.1.2 cannot convert DOC files to PDFs. You will need Adobe Acrobat to do this.
Save As > Adobe PDF feature is using Microsoft's PDF converter. You may need to follow up with them regarding the same.

WDA application configuration parameter Stylesheet URI not working

Hi Experts,
I created an application configuration for a webdynpro ABAP application and populated theme path for parameter Stylesheet URI on application configuration. However when I execute the application using this application configuration, the application does not pick up the theme.
If I pass the same path using URL parameter SAP-EP-THEMEROOT, it works. Also it works if I maintain it as URL parameter in SPRO
However for my requirement I need it to work specifically from application / application configuration parameter. Has anyone faced this problem and found a solution?
Thanks in Advance
Tanmay

I believe you need a redirect if you want to change between SSL and non-SSL.
How about something in the line of (example with code 404):
<If $code=404 && $security>
Error fn="redirect" url="http://oursite/error.html"
</If>.. where +$security+ means SSL.
About the Error and URI, it seems uri="/error.html" would work, but it will not switch you from SSL to non-SSL.
I'm curious why you would want to redirect a user to the non-SSL instance in this scenario..

Microsoft Teredo tunneling adapter #2 is not working

Hi, i'm having problems with "microsoft teredo tunneling adapter #2". I've tried to fix it, but it keeps on saying that it's not working.When i set the tcpip6/parameters value to 0 it only fixed the teredo tunneling adapter but the teredo tunneling
adapter #2 is still not working. any ideas?

Sten
This is a known problem if Zone alarm is installed. If you have it installed remove it at least to check
To turn off Teredo tunneling interface 6to4 open an elevated command prompt and type
netsh interface terredo set state disabled.
To Re-install it
Click on Start.
Type Device Manager in search box and open it.
Click the Action tab at the top and click add legacy hardware
then click next and next again it will then scan and find nothing click next on the screen after that.
Wait a minute and you will see a list of hardware appear, scroll down and choose network adapters then click next, then from the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling Adapter, then click
next and this will install it.
To check just make sure it is set to show hidden devices, right click on device manager on the right and click view then show hidden devices.
Wanikiya and Dyami--Team Zigzag

Workflow configuration for warehouse does not work

Hi,
I´m trying to create a workflow for a datawarehouse but for that I need to configure it.
When going to the Workflow Configuration Assistant it does not run. any idea?

hi,
i have installed de datawarehouse builder and then the server workflow 6.3. i had problems at installing the workflow and after looking in different forums the solution was that before installing I should do:
IGNORE_PREREQ=TRUE
After installing a new entry appeared in inicio->programs-><oracle_home>->migrating tools it was the workflow configuration assistant.
When executing this link a black screen appears and after 30secs it dissapears and nothing else happens.
In the tutorial
http://www.oracle.com/technology/obe/10gr2_owb/owb10gr2_gs/owb/lesson4/etl-mappings.htm
explains how the configuration should be but I can not do it.

Microsoft apps (outlook/Excel etc) do not work after SAPGUI 720 install

Hello,
We use a tool called MARIMBA to package and deploy SAPGUI and other apps to our users. Recently, we packaged SAPGUI 720 and deployed to some end-users (Win XP 32-bit SP3, Win 7 enterprise) via Marimba. However, after SAPGUI gets pushed to the end-user computers, users complain that their Microsoft apps don't work or are missing! Few users report Symantec Anti-virus does not launch.
I am not sure if this is unique to our environment. Please report here if you have encountered similar situation.
Thanks for your time.
Edited by: Gokul Ramaswamy on Apr 9, 2011 12:48 AM

You software is too old. You need to move to Office 2008, 2011 or use iWork or use Open Office (or Libre Office, or NeoOffice, etc.)

Microsoft Internet Explorer 10 and 11 not working

Hi Team,
Iam currently using windows 7 64-bit operating system and we require internet explorer 10 and 11 for our regular project usage.
When I have upgraded the version of IE from 9 to 10 or 11 its not responding and not showing in processes tab of task manager as well.
Request you to share your valuable thoughts in fixing this issue

Does the behavior persist after Resetting Internet Explorer, followed by a reboot? See
https://social.technet.microsoft.com/Forums/en-US/ad8ea815-11b6-43fb-9f84-1aec4115de77/unable-to-install-vs-professional-2013
Tip: For optimal results, check/enable the Delete personal settings option.
Is KB3003057, KB3006226, KB3010788, KB2992611, KB2993958, KB3005607, KB2978120, KB3003743, KB3002885 and/or
KB3011780 listed in Installed Updates (not
Update History)?
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Microsoft Comfort Keyboard 2000 "n" key not working

First off any n
that I type is copy pasted.
I bought the Comfort Keyboard 2000 less than
5 days ago and already the n key
has stopped working.
I am using Windows
7 64 bit and all other keys on the keyboard
work perfectly fine. All I could find
help for were the non-character keys.
This is very disappointing to me because
of the short amount of time it took for this product to stop functioning.
Thank you if you can
help.

Hi,
I suggest
removing and reinstalling the device driver.
http://www.microsoft.com/hardware/en-us/d/comfort-curve-keyboard-2000
If the issue persists, it is recommending contacting Microsoft Hardware support and let them examine the hardware.
http://www.microsoft.com/hardware/en-us/support
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

PI 7.1 - Configuring a client proxy - not working.

I am trying to send a Client proxy from ECC to XI.
This is a new PI 7.1 install so I am trying to test a quick and easy client proxy from ECC to XI and cant even get a message sent to XI.
On ECC, I am getting a weird message in SXI_MONITOR
I get a gray colored flag and when I hover over it, give me the following info:
"Message recorded (Commit Missing)".
Has anyone encounter this type of status.
Basically the message never send out to XI. Also, the message does not let me restart or even cancel the message.
Overall, all the config looks good on ECC
SLDCHECK looks good.
In ECC, I configured the Integration engine config as an Application Server and pointed it to RFC destination that points to the XI server.
-steve

Hi,
1) Queues are clean
2) I have checked the RFC Destination for the HTTP connection. It brings back a 500 empty response which is good.
I did a check on the Integration Engine Config and it brings back a yellow status that "Corresponding Integration Server not Maintined"
I wasnt sure if this was an info message that really wasnt an error.....any thoughts?

Configuration Plan for service not working

Hi,
I have written once config plan for my composite which has one inbound Fileadapter to read and one outbound fileadapter to write files.
if I am below configuration plan my files are being written to desired directory
<reference name="Write">
<property name="logicalDirectory">
<searchReplace>
<search>C:\Documents and Settings\Ashutosh Singh\Desktop\my Files\FileAdapter\Destination</search>
<replace>C:\Documents and Settings\Ashutosh Singh\Desktop\my Files\FileAdapter\Destination\logical</replace>
</searchReplace>
</property>
<binding type="jca"/>
</reference>
However If I write similar kind of search replace for my inbound service it is not picking the desired directory.
<service name="ReadFile">
<property name="PhysicalDirectory">
<searchReplace>
<search>C:\Documents and Settings\Ashutosh Singh\Desktop\my Files\FileAdapter\Source</search>
<replace>C:\Documents and Settings\Ashutosh Singh\Desktop\my Files\FileAdapter\Source\sub_source</replace>
</searchReplace>
</property>
<binding type="jca"/>
</service>
Kindly suggest

Refer the below blog URL to change the JCA properties through plan file
http://www.albinsblog.com/2012/10/exploring-deployment-plan-file-to.html#.UMCn-aycaS0
Regards
Albin I
http://www.albinsblog.com

Microsoft office 2004 for mac does not work now how do i get it to work!!

how do i get microsoft office for mac 2004 to work now i have downloaded Lion

Office 2008 is the oldest version that runs under lion. Office 2004 requires rosetta, which was discontinued as of 10.7. you'll have to upgrade to office 2008 or newer if you're using lion!

Sntp configuration in SF500 seems not working

I am experiencing the following issue:
SF500 switch is configured at the office and installed at remote location.   I check the clock setting (with CLI) after installing and see that the clock is NOT synchronized with the sntp server.
Then i go into cli and remove and add the same sntp server. And - surprise - the time is synchonized.....
What am i doing wrong here? Below is the output from the time part of the running-config, and a show version
SW-test#sh ver
SW version    1.3.0.62 ( date 02-May-2013 time 14:56:31 )
Boot version    1.3.0.03 ( date 23-Jul-2012 time 10:32:34 )
SW-test(config)#
SW-test#wr
Overwrite file [startup-config].... (Y/N)[N] ?Y
15-May-2013 21:36:12 %COPY-I-FILECPY: Files Copy - source URL running-config destination URL flash://startup-config
15-May-2013 21:36:23 %COPY-N-TRAP: The copy operation was completed successfully
Copy succeeded
show run
clock timezone CET +1
clock summer-time NED recurring last sun mar 02:00 last sun oct 03:00
clock source sntp
sntp unicast client enable
sntp unicast client poll
sntp server 172.27.3.1
SW-test#ping 172.27.3.1
Pinging 172.27.3.1 with 18 bytes of data:
18 bytes from 172.27.3.1: icmp_seq=1. time=20 ms
18 bytes from 172.27.3.1: icmp_seq=2. time=20 ms
18 bytes from 172.27.3.1: icmp_seq=3. time=20 ms
18 bytes from 172.27.3.1: icmp_seq=4. time=20 ms
----172.27.3.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 20/20/20
SW-test#conf t
SW-test(config)#no sntp server 172.27.3.1
SW-test(config)#sntp server 172.27.3.1
SW-test(config)#
SW-test#sh clock
16:32:10 CET Mar 1 2015

Ok, i just discovered that there probably also should be a "poll" after the sntp server ip addresses.
sntp server 172.27.3.1 poll

Configuring Mail and Calendar not working.

Hello,
I have just setup Mac OS X Server with my own domain (server.mydomain.com). I am having trouble getting the mail and calendar to work on my computer that is hosted on google apps. It will not connect at all. My email address is [email protected] Could there be something wrong with the DNS settings of my server that is causing it conflict to connect? I am hoping someone out there can help me! At the moment I can not find anything anywhere to sort this out.

For Mail.
Do a backup.
Take notes of all account information or take screen shots. You may need to set the accounts up again. Quit Mail.
Copy the line below.
~/Library/Containers/com.apple.mail
Select Go/Go To Folder from the Finder menu bar. Paste the line into the window. You won’t see it.
Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
Relaunch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. If the problem remains, return the folder to where you got it replacing the one that is there.
Information learned from Linc Davis.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library Directory in Mac OS X 10.7 Lion & 10.8 Mountain Lion
You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible.

Microsoft Baseline Configuration Analzyer 2.0 not working

Similar Messages

Maybe you are looking for