Microsoft Binary Format accessing - conversion algorithm needed

I need to access data from a 3rd party source but the numeric fields are stored in Microsoft Binary Format.
Does anybody has a java source code of procedure that does conversion between MSBinary float to IEEE float (Java float)?

I think the point is, the good Dr didn't even know what "Microsoft Binary Format" was and was able to come up with code for it in a flash, so one would think that someone who was at least familiar with it could use the Web to do same. Further evidence of the lost art of searching the web.

Similar Messages

Any format to jpeg conversion algorithm required

Hello,
Can anybody help me out in finding image conversion algorithms for converting images from bmp to jpg, tiff to jpg, png to jpg, gif to jpg etc.
Thanks in advance
regards
Gopal.K

look up the JAI (Java Advanced Imaging), once you load a file, you can save it back as any type that is supported--including JPEG.

Create a Document in DMS and attach a file coming in binary format

Hi to all,
I have to create a new document in DMS (trx: CV01N) with an attachment but this attachment is a pdf file in binary format. Can I use bapi "BAPI_DOCUMENT_CREATE2"? It support binary files in input or I have to convert files in someway? Or I have to use another BAPI?
I'm using an r/3 4.6c and I know that it is a big limit.
Please, I need help.
Thank you very much in advance,
Enrico

That assumes two things:
1. That Apple would have let Microsoft have access to its file format.
2. That Microsoft would want to spend the time and trouble to write filters for file formats that Apple can't be bothered doing for its own software.
Peter

How to convert image to binary format

Hi all,
We have developed an Employee search mobile web application in .net which is hosted on an exposed IP server, we need to show the employee data along with the image of the employee on mobile.
When we run this application through our desktop we are able to see the image of the employee since we are doing this through intranet , but when we try to access the same from any mobile device we are able to see only the data but no image, since we are doing this through internet(exposed server).
Please suggest some way to get this image,
is there any function module in ABAP which can convert image to binary format
so that we export binary data to .net application

Hei evryone!
CAn anyone pls help me on how to solve this error:
java.security.AccessControlException: access denied (java.security.SecurityPermission insertProvider.SunJCE)
 at java.security.AccessControlContext.checkPermission(Unknown Source)
 at java.security.AccessController.checkPermission(Unknown Source)
 at java.lang.SecurityManager.checkPermission(Unknown Source)
 at java.lang.SecurityManager.checkSecurityAccess(Unknown Source)
 at sun.plugin.security.ActivatorSecurityManager.checkSecurityAccess(Unknown Source)
 at java.security.Security.check(Unknown Source)
 at java.security.Security.insertProviderAt(Unknown Source)
 at java.security.Security.addProvider(Unknown Source)
 at CryptoTest.processFile(SwingApplet.java:68)
 at CryptoTest.<init>(SwingApplet.java:65)
 at SwingApplet.init(SwingApplet.java:39)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Is it allright for a swing code to access local resources? like in my case i want my swing app to decrypt and encrypt an image file but when i tried to access the method for decrypting and encrypting i got this error message on my console. Do i have to make my code signed before i could write/read a file on my hard drive?
Any help / suggestions would be much appreciated.Thanks!

BlackBerry Internet Service with Microsoft Outlook Web Access account

I need to switch my 8820 to a new work account. They use Outlook Exchange 2003, but do not support BES. I have access via both regular desktop Outlook and also Outlook Web Access (from a different server). I read the procedure to use BIS in KnowledgeBase KB03133. After entering my email address and password, I get a message that it was successfully set up. But, I get no e-mail messages delivered. When I check the settings, it looks like it is not using the correct server for Web Access. However, I can find no way to manually enter it - I don't get the error message described in Step 5 where I can pick "I will provide the settings." I try to set up via computer but I get a message that my BIS cannot be accessed via HTML and need to set up on my BB.
Any suggestions? Would it work with a newer phone running a newer OS? Do I need to check with AT&T if it supports Outlook Web Access? Thanks in advance.

Hi and Welcome to the Forums!
Lot's of possible variables...here a several other KBs to try:
KB03133How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
KB18567BlackBerry Internet Service cannot connect to a Microsoft Outlook Web Access account using Microsoft Exchange 2007 or Microsoft Exchange 2010
KB15173Locate the mailbox name for a Microsoft Outlook Web Access 2007 email account
KB04804Error message appears when attempting to integrate a Microsoft Outlook Web Access 2010 account
KB02858Unable to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
The trick to getting to the manual settings screen is to provide your valid email address, but an incorrect password...then, it will allow you to manually enter the settings.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
 Cheers, Tom

Read DMS document in binary format

Hi,
I have a requirement to read DMS document in binary format into internal table.
and i want to print the data in internal table through SAP spool.
Please let me know how to handle this requirement.
Thanks
Srini

Hi,
Check scms pakage, FG - SCMS_CONV for conversions..
Regards
Surjit

Replace the XML Tags which are in binary format in 4.6C Version

Hi Experts,
I have an issue. I am working on 4.6 c version of sap. I have a requirement to send ftp of an xml file. I created an internal table which has components of table type too ( For Line items ). After appending a record of sales order into the table I am using SDIXML_DATA_TO_DOM ( To attach the to the document ) and SDIXML_DOM_TO_XML ( To convert the document contents into XML ( Binary Format ).
 CLASS cl_ixml DEFINITION LOAD.
 g_ixml = cl_ixml=>create( ).
 CHECK NOT g_ixml IS INITIAL.
 m_document = g_ixml->create_document( ).
 CHECK NOT m_document IS INITIAL.
 CALL FUNCTION 'SDIXML_DATA_TO_DOM'
 EXPORTING
 NAME = 'xmldata' " data in character format
 DATAOBJECT = xmldata[]
 IMPORTING
 DATA_AS_DOM = l_dom
 CHANGING
 DOCUMENT = m_document
 EXCEPTIONS
 ILLEGAL_NAME = 1
 OTHERS = 2
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CHECK NOT l_dom IS INITIAL.
 w_rc = m_document->append_child( new_child = l_dom ).
 IF w_rc IS INITIAL.
 WRITE 'OK'.
 ELSE.
 WRITE: 'ERR ='.
 ENDIF.
 CALL FUNCTION 'SDIXML_DOM_TO_XML'
 EXPORTING
 DOCUMENT = m_document
 PRETTY_PRINT = ' '
 IMPORTING
 XML_AS_STRING = w_string
 SIZE = w_size
 TABLES
 XML_AS_TABLE = it_xml " Final XML data ( with xml tags ( xml tags are the field names of internal table ) ) in bin
 EXCEPTIONS
 NO_DOCUMENT = 1
 OTHERS = 2
 IF SY-SUBRC = 0.
 WRITE 'OK'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ELSE.
 WRITE: 'ERR =',
 sy-subrc.
 ENDIF.
So, it_xml has the binary format of XML data.
Now the requirement is that I need to get rid of some XML tags in the final internal table XML data. Because by default, at the start of the the table row the <item> and </item> tags are inserted. This is automatically done in the Function module
SDIXML_DOM_TO_XML.
I want to find out the binary string of <item> and </item> and replace them by null binary string. I know how to replace the character strings but not for binary strings in 4.6 C.
It is little bit urget. I would appreciate the quicker answer.

Hi,
check this program , I think this will help you
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
data : itab like catsdb occurs 100 with header line.
data : file_location type STRING.
data : file_name like sy-datum.
data : file_create type STRING.
file_name = sy-datum .
file_location = 'C:\xml\'.
concatenate file_location file_name into file_create.
concatenate file_create '.XML' into file_create.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i.
select * from catsdb into table itab.
append itab .
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
I_XML_DOC_NAME =
IMPORTING
PE_BIN_FILESIZE = l_xml_size
TABLES
i_tab_sap_data = itab
CHANGING
I_TAB_CONVERTED_DATA = l_xml_table
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 24
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = file_create
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
write : 'INTERNAL TABLE DATA IS SUCCESSFULLY DOWNLOADED TO LOCATION', file_create .
Thanks.

How to read 16-bit signed integer in binary format with 2 byte sync. preceding??

A flowmeter provides data as 16-bit signed integer in binary format with 2 byte sync. preceding
I got i small problem by understanding the synchronasation.
I read the data provided by the flowmeter, and then write it to a binaryfile.dat. i need to convert the data to decimal format. is it better to convert the data before or after writing it to the binary file. Coz i need to read the data out again for calculations and save it again in a new file.
I understand that the synchronization help one to see where to begin reading the usable data. is it right?
Need any suggestions
Thank you !
Zamzam
HFZ
Attachments:
DataOut.JPG ‏37 KB

HI Rolf.k.
Thank you for the small program it was helpfull.
You got right about that proberly there will be conflict with some spurios data, I can already detect that when writing the data to a spreadsheet file.
I writes the data in such a way, that in each line there will be a date, a timestamp, a tab and a timestamp at the end. That means two columns.
When i set given samplerate up, that controls the rate of the data outflow from the device, (1,56 Hz - 200 Hz), the data file that i write to , looks unorderet.
i get more than one timestamp and severel datavalues in every line and so on down the spreadsheet file.
Now the question is: Could it be that the function that writes the data to the file, can't handle the speed of the dataflow in such a way that the time stamp cant follow with the data flowspeed. so i'm trying to set the timestamp to be with fractions of the seconds by adding the unit (<digit>) in the timestamp icon but its not working. Meaby when i take the fractions off a second within the timestamp i can get every timestamp with its right data value. Am i in deeb water or what do You mean!??
AAttached Pics part of program and a logfile over data written to file
regards
Zamzam
HFZ
Attachments:
DataFlowWR.JPG ‏159 KB
Datalogfile.JPG ‏386 KB

LabVIEW binary format that can be opened with Python

I need to save data in a binary format which can be opened with Python. I have tried the "Write Waveforms to File (1D).vi" and can open them back up in LabView, but the binary format is not published anywhere, so I cannot open them in Python. They appear to be saving as DataLog type binary files.
Is there another binary format which I can use that I can open in Python?
The reason I need this is that with 16-channel DAQ at 20kHz I can only save about 30 seconds of data. For longer periods, the task of writing to a text file consumes all available memory and cpu.

I found a solution. I found an open-source project called pyTDMS (google for it), and it can read tdms type files sometimes. It was some trial and error to get my data saved in a way that pyTDMS could open the file, but in the end it works great.
I have two digital output channels as well as 16 analog input channels, so here is how I had to save the data within LabView:
The 16 analog input channels were saved as a 1D array of waveforms. Then the digital output channels were made into another 1D array of waveforms. The trick was to use the write tdms subvi twice. Once for the analog input channels and again, on the same file, for the digital output channels. pyTDMS opens these files just fine, and I can use the metadata to sort out what channels the data goes with in Python.

String (binary) to boolean conversion problem.

Hello,
Im facing problems converting a string (presumably in the binary format) to turn on LEDs according to its respective weight. ie.binary input = 1010. Thereby it would turn on the first (MSB) and third LEDs while the second and third are left off.
What I have managed to obtain is a direct conversion of decimal to binary but have not much idea on how to achieve the above goal. The attached file shows two operations; top part does the boolean to binary conversion is fine. The bottom is supposed to be the binary to boolean conversion.
Attachments:
boolean to string.vi ‏21 KB

OK, let's back up a second here. I don't understand what your "boolean to string" VI is doing. Are you starting with a string, a number, or a bunch of Boolean controls? The top part is dealing with Boolean controls and creating a string of characters of "0" and "1". The bottom part you have a numeric control. By the way, it is pointless to take the output of Number to Boolean Array, converting it to an array of 0s and 1s, indexing out each element, and then using the Not Equal to Zero operator. Just take the Boolean array output from Number to Boolean Array directly into an Index Array!
You seem to be saying that you have a string in the binary format. This is somewhat meaningless, so I'm assuming you mean you have a string that consists of a sequence of the ASCII characters "1" and "0" to indicate a numerical 1 or 0. You then want to convert this into something that is programmatically useful. What that is is not clear, so let's assume an array of Booleans. If that's the case, then you can simply take advantage of the fact that you're starting out with ASCII characters, and use the ASCII codes to find out what you have. The ASCII code for the character "0" is 30 (hex) or 48 (decimal). The ASCII code for the character "1" is 31 (hex) or 49 (decimal). Assuming this is what you have and what you want, then you can simply do this:
Attachments:
Example_VI.png ‏8 KB

Really struggling to export adobe pdf to a microsoft word format so i can send onwards as email attachment

really struggling to export adobe pdf to a microsoft word format so i can send onwards as email attachment

Why would you need to do that? You can attach a PDF to an email directly...

Extract FORM data into BINARY format or XSTRING format?

Hello,
Our config: I am developing an VISITOR Adobe Interactive Form, i have Designer 8.1 and Reader 9.0 in my Windows 7 Laptop. When i checked the menu EDIT-->form properties --> Compatability, its Adobe XML form File (XDP)
When i opened this VISITOR interactive form in a browser, right clicking and checked form PROPERTIES, then i saw the "PDF Version: 1.6 (Acrobat 7.x)"
I am using JavaScript
1st user opened the form, entered data, say entered USA in COUNTRY field.
2nd user opened the same form and edited the COUNTRY field from USA to UK.
Pls. let me know is there any way for me to capture the user entered data into a BINARY format or XSTRING or RAW FORMAT or RAW STRIGN
Pls. note i need latest changes, like COUNTRY field hold the value of UK.
Pls. note for some reason, SAVE the form should not come into picture in my case (form will be saved in some workflow (pls. note not adobe's workflow, we hv SAP workflow) staging area in the time lapse of between 1st user and 2nd user,)
Thank you

I am looking WHOLE FORMA DATA in either XSTRING or BINARY FORMAT or any other format, except STRING format.
I gave COUNTRY as an example, but am looking the HWOLE form AS IS
Any help pls.
Thank you

Extract Form either in BINARY FORMAT or XSTRING?

Hello,
Our config: I am developing an VISITOR Adobe Interactive Form, i have Designer 8.1 and Reader 9.0 in my Windows 7 Laptop. When i checked the menu EDIT-->form properties --> Compatability, its Adobe XML form File (XDP)
When i opened this VISITOR interactive form in a browser, right clicking and checked form PROPERTIES, then i saw the "PDF Version: 1.6 (Acrobat 7.x)"
I am using JavaScript
1st user opened the form, entered data, say entered USA in COUNTRY field.
2nd user opened the same form and edited the COUNTRY field from USA to UK.
Pls. let me know is there any way for me to capture the user entered data into a BINARY format or XSTRING or RAW FORMAT or RAW STRIGN
Pls. note i need latest changes, like COUNTRY field hold the value of UK.
Pls. note for some reason, SAVE the form should not come into picture in my case (form will be saved in some workflow (pls. note not adobe's workflow, we hv SAP workflow) staging area in the time lapse of between 1st user and 2nd user,)
Thank you

I am looking WHOLE FORMA DATA in either XSTRING or BINARY FORMAT or any other format, except STRING format.
I gave COUNTRY as an example, but am looking the HWOLE form AS IS
Any help pls.
Thank you

Converting Resource(Dictionary Simple Type) to Binary Format.

Hello Experts,
In my Web Dynpro Application,
I have a View Context attribute called "FileResource" of type Resource(Dictionary Simple Type) which is bound to the FileUpload UIElement of View.
When im running the application I am able to Upload the file in my view context attribute successfully,
Now I need to pass it to the RFC as an Import Parameter which is declared as type "RAW-Uninterpreted Sequence of bytes",
kindly guide me how to convert the value of the view context attribute "FileResource" of type Resource(Dictionary Simple Type) into BINARY format, so that i can pass it to the RFC as an import parameter.
Thank you please reply.........

I used this code from a tutorial. And it work. Place Some of this code on any button.
     IPrivateFileUploadVIEW.IContextElement element = wdContext.currentContextElement();
     //if a file in the FileUpload field exists
     if (element.getResource() != null)
          IWDResource resource = element.getResource();
          try{
               InputStream archivo = resource.read(false);
               byte[] b = new byte[5000];
               archivo.read(b);
               //ResourceBundle.getBundle();
               wdContext.currentZ_Lmmfu_Cambio_Estado_InputElement().setI_Archivo(b);
               wdThis.wdGetAdminCMPController().executeZ_Lmmfu_Cambio_Estado_Input();
               //Imprimir nombre del archivo
               String name=resource.getResourceName();
               wdComponentAPI.getMessageManager().reportException(name,false);
                    File f = new File(resource.toString());
     catch(IOException error)
          wdComponentAPI.getMessageManager().reportException(error.toString(),false);
      //report success message
     // wdComponentAPI.getMessageManager().reportMessage(IMessageAdministracionCMP aa ,new Object[] { resource.getResourceName()}, false);
      else
     // if no file in the FileUpload field exists
     //     report error message
     wdComponentAPI.getMessageManager().reportException("Search for a file",false);
     //     clear the 'FileResource' context value attribute
     element.setResource(null);
Is there a better way to do this.
I need to get the creation or modification date from the original file. How can I do this?

Microsoft Binary Format accessing - conversion algorithm needed

Similar Messages

Maybe you are looking for