Microsoft DLL registeration on Sun Solaris OS

Can I register or execute Ms. DLL or .EXE on Sun Solaris OS? Thanks in advance.
Imran

Thanks for answer.
Is there any alternate for activeX control for Solaris environment?
Regards,
Imran

Similar Messages

Problems in installing msi k9n6gm-v drivers in sun solaris

I have problems in installing drivers of my msi motherboard. Please help me. Also im new in using sun solaris. I dont know how to run executable and .ini files format which is windows compatible.

You are new to the forum, so some advice:
Do not post the same question to multiple forums.
Pick one and place it there.
You will get a response or you will not get a response.
Cross-posting will not get any answer, any faster, and it is considered bad forum manners.
ini and exe files are for Microsoft's OS.
They don't work in *NIX.
Your motherboard drivers are for Windows and cannot be used for Solaris.
Here are a few links for you to spend some time with:
http://www.sun.com/bigadmin/hcl/hcts/device_detect.html
http://www.sun.com/bigadmin/hcl/
http://72.5.124.61/software/solaris/howtoguides/installationhowto.jsp
http://docs.sun.com/app/docs/doc/817-0544/

Error 404 after applying p9492821 to OBIEE 10.1.3.4.1 on SUN Solaris

Hi Experts
I have applied teh above patch to OBIEE 10.1.3.4.1 on sun solaris as per the steps provided in the patch doc.
But after applying patch when i try to connect to presentation layer i am getting error
HTTP 404 Not Found
http://192.17.61.85:9704/analytics/saw.dll?Dashboard
if i browse http://192.17.61.85:9704/ i am able to get the welcome page.
oc4j is runnign
bi server and presentation services are also running
any help???
regards
Gourisankar

Are you able to reach presentation services and login if you go to http://192.17.61.85:9704/saw.dll ?
If so this may be a JEE application container issue or some type of rewriting of the URL going on.
Do you have a list of all the items that the patch modified?

Sun Solaris 2 OS vs Audition 3

Hi folks, just a newbie question please if I may ask will Audition 3 run on Sun Solaris 2 operating system or is it exclusive to Microsoft products?
I am considering moving from Vista Ultimate 64 to Solaris 2 because 1: it's free, 2: it's fast, 3: it can use my 8GB RAM whereas Vista 64 can't or doesn't know how to; everything is just SO slow, and I need speed to get my work done.
Thanks.
Ian Samson
[email protected]

Okay, so I am a real novice here. This is what I put to Sun Solaris:
My behemoth PC "Brutus" has two 500 GB HDDs, 8GB RAM, two Intel DuoCore2
3.xGHz processors, and Windows is painfully slow. If I were to download
Sun's Solaris 2 for x64 systems, is it like a Unix machine that runs
extremely quickly? Microsoft doesn't need amateur users writing them and
bugging them with user questions, they have far more important matters to
consider, such as this new Solaris 2 operating system from Sun Microsystems.
This is going to challenge Microsoft's OS realm, particularly since it is
free to download and install and use. The challenge is also there with Sun's
OpenOffice.org 3.1 release just installed today. I cannot afford Microsoft's
ever increasing prices for operating systems.
What is my learning curve going to be from running DOS 2.0 to Vista Ultimate
64, by changing to Sun Solaris 2, and will that mean I have to rid all 5
machines in my home network of Windows operating systems and move everything
onto Solaris if the hardware can take it? I simply do not have more than 24
hours in my day and it's already overstretched. I need a solution now, will
Adobe Audition 3.0.1 run on Sun Solaris 2, or can I reinstall Vista into a
Solaris "box" so that Adobe Audition thinks it is in a Windows Environment,
and Windows thinks it's in control, but in fact they are all running in a
little Solaris "box" on the PC?
2009/5/11 SteveG(AudioMasters) <[email protected]>

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Installation problem sun solaris 9 x86 on intel

I am trying to install sun solaris 9 x86 intel platform edition on my home pc hp e-vectra, configuration is PIII 800 Mhz, 10 GB HDD, 128 MB Ram, 17" color monitor, but it giving me following error :-
BooT Panic: trap type e, error 0 at 117499
Cr0: 800000011, cr1: 4, cr3: 17e000
Eax: 0, ebx: 7e2c, ecx: 0 edx: 16e350
Es: fffffffe, edi: 17dfe0, ebp: 7e40, esp: 7e20
Entering boot debugger:
Please help me, how can I install sun solaris 9 x86 on my HP E-Vectra PC.
Kalpesh Mehta

I had similar problems several months ago. I suspect this happens when host pc does not have floppy drive(or bios somehow misreports it) as it was in my case. Solaris 8 seems to work fine in the same environment, so I keep using it for now. Possible workaround might be to use DCA from Solaris 8: Installation of Sol9 started just fine after I entered Sol8 DCA and asked it to boot from Sol9 CD.
Hope this problem will be fixed in subsequent Sol9 releases.
Victor

Sun Solaris 10 installation problem on IBM ThinkPad R31Notebook

Hello,
I have tried to install Sun Solaris 10 on my IBM ThinkPad R31 notebook, but the system has problem at initial stage of loading the installation software from CD. Here is the message I see on the screen when the CD is loaded:
loading stage2 ....
GNU GRUB Version 0.95 (639K lower / 514880K upper memory"
Solaris
Solaris Serial Console ttya
Solaris Serial Console ttyb (for 1x50, v60x and v65x
SunOS Release 5.10 version Generic_118855-33 32-bit
Copyright 1983-2006 Sun Microsystems, Inc All Right reserved
Use is subject to license terms
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
I changed both memory and the hard drive but I still have the same problem. Can anyone please tell me what the problem might be or what remedial step I should take to install Solaris 10 on R31?
Thanks

Did you try install check CD before the installation?
I think that there might be two main reasons:
1. Your computer is not supported
2. Hard drive may need to be formated to FAT32 or UFS

Portal Installation Problem on Sun Solaris

Hi,
I'm trying to Install portal (Oracle 9i AS ) on Sun Solaris 2.8 (64 bit). I have followed all the steps and installer show successfull installation. But when I'm trying to check the installation thru web browser, I'm not getting anything. It is not able to load portal. Please let me know do I need to start any listener or anything else.
What else should I do to check the mistakes because I have installed it twise but no luck.
Thanks.
Sandeep

I am having the same problem installing on Windows 2000. I looked at the services that were installed and two of the ones that were marked as Automatic did not start when I rebooted. They are:
OracleiSuitesHTTPServer
OracleOraHome81TNSListener
I also tried to start the HTTP server from the command line but got the following error:
D:\Oracle\iSuites\Apache\Apache>apache
Syntax error on line 14 of D:\Oracle\iSuites\Apache\Apache\conf\mod__ose.conf:
AuroraService - directive already in effect for this Server
If anyone has a solution please let me know. I had a hard enough time trying to get through the installation at all.
Thanks,
-Stephanie
null

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Duplex print with Report 6i on SUN Solaris

Dear All,
I would like to know if it's possible to print in duplex mode using Report 6i on SUN Solaris. If yes! show me the way.Thanks for help.

Hi DG,
Thanks a lot for being patient with me.
Here is what df -k returned.
# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0d1s0 1139022 711306 370765 66% /
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
mnttab 0 0 0 0% /etc/mnttab
swap 215536 4 215532 1% /var/run
swap 215848 316 215532 1% /tmp
/dev/dsk/c0d1s7 6404645 4938156 1402443 78% /export/home
# who
root console Jul 20 14:09 (:0)
root pts/4 Jul 20 14:10 (:0.0)
The foregoing list shows that I do not have sufficient disk space. Oracle Install documentation says I should have 3GB for a full install. My second hard disk should be able to handle this, but I do not know yet how I can add more disk space to the file system. Can you please tell me how I can do this?
Meanwhile I am deleting the 13 files 9iAS10220_part1 through 9iAS10220_part13 to free up some disk space. Having extracted files and created Disk1 through Disk5, I do not think I will need these 13 files anymore.
I am still trying to understand what runInstaller script is trying to do.
Roger
null

PCC-S-02014 error while compiling with in Sun Solaris

We are porting our application from HP-UX to Sun Solaris and as part of that I am trying the compile a Pro*C program in Sun Solaris using SUNWspro C++ compiler. Precompiling is failing with following error.
PRECOMP set: /u01/app/oracle/product/10.2.0/bin/proc dbms=native code=cpp mode=ansi include=/u01/app/oracle/product/10.2.0/precomp
ireclen=255 oreclen=255
define=__sparc define=__SUNPRO_C include=/usr/include include=. include=/u01/app/SUNWspro/prod/include/CC/stlport4 include=/u01/app/oracle/product/10.2.0/rdbms/public/ include=/u01/app/oracle/product/10.2.0/network/public/ include=/u01/app/oracle/product/10.2.0/rdbms/demo/ errors=yes select_error=no
sqlcheck=limited ltype=NONE
release_cursor=no hold_cursor=no
Pro*C/C++: Release 10.2.0.3.0 - Production on Thu Dec 18 03:09:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: /u01/app/oracle/product/10.2.0/precomp/admin/pcscfg.cfg
Syntax error at line 44, column 30, file /u01/app/SUNWspro/prod/include/CC/stlport4/algorithm:
Error at line 44, column 30 in file /u01/app/SUNWspro/prod/include/CC/stlport4/a
lgorithm
# include STLPNATIVE_HEADER(algorithm)
.............................1
PCC-S-02014, Encountered the symbol "(" when expecting one of the following:
: [ ] + / . .. an identifier, a numeric constant, newline,
define, elif, else, endif, error, if, ifdef, ifndef, include,
line, pragma, undef, exec, sql, begin, end, var, type,
oracle, an immediate preprocessor command, a C token, create,
function, package, procedure, trigger, or, replace,
Normal C++ files are getting compiled with out eny issues. This particular file is having functions written in C fashion. Any idea what is missing in the compiler option.
regards
Vinu

Hi Vinu,
I'm not sure if this is still an issue for you. When I have encountered issues like this with Pro*C I have ended up specifying parse=none to the proc command and then putting all declarations between "EXEC SQL BEGIN DECLARE SECTION" and "EXEC SQL END DECLARE SECTION" markers. I have also moved any "special" declarations into a specific header file and then placed the "#include <special header file>" inside the declare section as well.
Perhaps that will help a bit,
Regards,
Mark

BPEL Server installation on JBOSS application Server on SUN SOLARIS

I have a question about Oracle BPEL installation. For our project exists the requirement, to install BPEL Server on SUN SOLARIS, whereby the appropriate Version of Application server JBOSS already exists and it should be used.
The version of the Oracle BPEL server for JBOSS, which we found on the Download side, is made available only with JBOSS (version 3.2.6) in a Package.
During the BPEL server installation this bound JBOSS server version is installed automatically, without giving selection. Is there a BPEL installation for JBOSS on SUN-SOLARIS, which can be installed at the already existing JBOSS server?

Hi There,
Dis you get any good responces to your question ?
Thanks
[email protected]

Java.lang.NoClassDefFound Error while invoking dbua(9.2.0.8)on Sun Solaris.

Hi Friends,
I had installed Oracle 9.2.0.1(software alone) on Sun solaris box and then i installed the patchset 9.2.0.8 on the same Oracle 9i Home.It's installed.
But when i try to run dbca to cretae a database from $ORACLE_HOME/bin it throws the error:
java.lang.NoClassDefFoundError
i had set the PATH,ORACLE_SID,ORACLE_HOME,LD_LIBRARY_PATH but still getting the error.
Please suggest a fix.
Regrads,
Arun

Do you have JAVA_HOME set in your environment?
What's the result of
env
Make sure DBCA is calling the java under $ORACLE_HOME not from other installation.

Front end of PL/SQL for Sun solaris

Hi,
What are the popular front ends and also Which is best front end of PL/SQL under
UNIX (Sun Solaris) platform.

You can use Sql Navigator from Qwest Software
which can run on Win95/NT/2000. You can use SQL*NET to connect to your Sun Solaris or any other Oracle instance running on UNIX platform.
Jack
null

Microsoft DLL registeration on Sun Solaris OS

Similar Messages

Maybe you are looking for