Microsoft Dyamics CRM 2015 : Current Geospatial Capabilities

Greetings,
I have only become familiar with MS Dynamics CRM 2013. We have recently upgraded to 2015. I am seeking some knowledge regarding current geospatial capabilities and/or integration. May somebody please provide a link or start a discussion with
me?
Regards,
Jeff

Hi Chris,
Thank you for your reply. Currently we are tracking data relating to the following that want to integrate high-level geospatial visualizations with CRM 2015:
-level of training material and support
-allowances of products based on demand
-training methods/providers and impact on training performance
-cost analysis of support/training
-forecasting of support needed, products to manufacture, and training
Some example use-cases of high-level geospatial visualizations would be:
- Training: how much?, where?, who?
- support needed at specific locations
- cost of support/training at specific locatations
-etc...
I am aware of the Bing Map feature in 2015. I am sort of the bridge between a geospatial team and upper management; I have done CRM development in 2013 but nothing geospatial.
Is this something that could integrate well with PowerMaps or PowerBi? If so, how efficiently? Can I provide my own data visualization in iframe in 2015 CRM interface? I want to avoid adding any non-value-add activities for users and upper
mgt by keeping the visualizations within CRM.
I'm fresh out of college and new to this organization. Any advice would help.
Thanks

Similar Messages

Microsoft Dynamics CRM 2015 online (AD requirements)

Hi all,
we are currently looking to setup a CRM 2015 online environment.
I tried looking in the Technet articles but couldn't find an answer.
Do we need to forsee Active directory groups (such as PrivUserGroup, SQLAccessGroup,...) like we do for the On premise version?
And do we need to give a license, or does this come with the Office 365 license?
Any help would be highly appreciated.
Regards,

Got a call from MS support, its across the entire service. They are working hard to fix meanwhile they provided a work around I am not sure if it will work for everyone but
https://ORGNAME--s.crm4.dynamics.com worked for me. Or variations where --d becomes --s
so that is the normal url https://ORGNAME.crm4.dynamics.com/ you take the orgname and add --d or --s followed by crm4.dynamics.com
Only works in IE
teach a man to fish ... etcetera

Biztalk 2013 integration with CRM 2015

Hi,
I am working on a BizTalk 2013 integration with CRM 2015 on premise server and currently developing a POC to see how it works. There are quite a few good articles on BizTalk-CRM integration and I am referring them while building this POC. However I thought
of taking expet’s advice for this. Here are my requirements as of now.
Search CRM contacts by Fname, Lname etc.. And definitely not by Contact ID which is GUID. In this case BizTalk can expect responses like Single contact, Multiple contacts, Contact Not found or soap fault.
Create a single contact record in CRM from BizTalk.
Update Contact details in CRM like multiple addresses for a single contact.
So we have 2 approaches to integrate CRM, using untyped soap endpoint or CRM SDK.
I did an orchestration today with soap endpoint for “Retrieve” operation bypassing a GUID and can see the response returned. But how to pass the fname, lname etc. instead of GUID as there are no fields to populate in the soap Retrieve schema?
Is it wise decision to use untyped soap UI instead of CRM SDK proxy by keeping the above 3 requirements in mind?
Using SOAP endpoint, how can achieve the requirement 1 that returns multiple contacts?
I have seen articles using Query and Fetch to get multiple contacts and I really don’t understand it. Is it the only way to get multiple contacts?
Thanks!
JB

Hi Abhishek,
While exploring the CRM REST capabilities i found the below content on MSDN that says the REST endpoint works only for getting the contact by uniqueID and not by firstname and lastname etc...
https://msdn.microsoft.com/en-us/library/gg328090.aspx#BKMK_RetrievingRecords
Retrieving records
HTTP GET is used when you are retrieving records. When a unique identifier for
a specific record is provided, only that record will be retrieved. Otherwise, any system query options that are defined will be applied and up to 50 records will be retrieved that match any system query option filters.
We can't use a GUID as it is name search from customer website and GUID available at that stage.
So if it works only with GUID then we have to use either CRM SDK or SOAP enpoint right?
Cheers
JB

Error while installing the Microsoft Dynamics CRM 2013 Report Authoring Extension set up

HI Experts,
I am trying to install Report Authoring extension tool to work with MS CRM 2015 online reports but unable to install, getting below error even though I am having VS 2013, SQL Server 2014 and Data tools for VS 2013 installed on my machine.
Please help me to fix this issue.
When I double click the error getting below error.
Error : Business Intelligence Development Studio is not installed for Microsoft SQL Server Reporting Services.
When I click the details , getting below error.
Thanks
Baji Rahaman

The Report Authoring Extensions (any version) don't support VS 2013. Currently the Crm 2015 Report Authoring Extensions support VS 2012 and VS 2010, and the Crm 2013 Report Authoring Extensions supports only VS 2010.
By the way, the error you posted suggests you're trying to install the Crm 2011 Report Authoring Extensions
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

Question on CRM 2015 on-premise features (U.K. version)

Hi All,
Does the new on premise version of the CRM 2015 come with an in-built Marketing system which records delivery stats such as email opens, click thrus etc. or is this somthing contained in a plug-in or something you have to subscribe to? I ask because we are
about to install a third party email marketing system into CRM and I can't see how the CRM 2015 can capture this level of detail unless Microsoft were sending the emails on our behalf through some sort of cloud service? We currently use CRM 2011 and i do recall
that landing pages were available in the US on-premise version but not the UK on-premise version so I am aware that differences can exist between versions.
Any advice would be greatly appreciated.
Thanks
David
David Kelly

No, that is a separate product called Dynamics Marketing. It's not part of CRM. You can add tools like ClickDimensions to CRM to handle that for you if you as well.
also, landing pages have been entirely removed form Dynamics CRM.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

SharePoint List Component Activation Error CRM 2015 SP 2010

Hi
We are trying to load up the CRM 2015 list component on SharePoint 2010. We have enabled the SharePoint Sandbox and did other searching but have not seen any web results for this error. We have tried to load this in 2 different environments and
get the same error. Any help would be appreciated.
Thanks Paul
Name=Request (POST:http://pmt-d:80/_catalogs/solutions/Forms/Activate.aspx?IsDlg=1&op=ACT&ID=1&Source=http%3A%2F%2Fpmt%2Dd%2F%5Fcatalogs%2Fsolutions)
Template Discovery/InitScriptData: cannot get user profile, no UserProfileApplicationProxy exists in the current context
Solution Deployment : Looking for 'ReceiverAssembly' attribute in manifest root node for solution 'crmlistcomponent.wsp'.
Solution Deployment : Looking for 'ReceiverClass' attribute in manifest root node for solution 'crmlistcomponent.wsp'.
Solution Deployment : Missing one or more of the following attributes from the root node in solution crmlistcomponent.wsp: assembly '', type ''.
System.ArgumentException: Culture name 'sr-cyrl' is not supported. Parameter name: name
at System.Globalization.CultureTableRecord..ctor(String cultureName, Boolean useUserOverride)
at System.Globalization.CultureTableRecord.GetCultureTableRecord(String name, Boolean useUserOverride)
at System.Globalization.CultureInfo..ctor(String name, Boolean useUserOverride)
at System.Reflection.AssemblyName.nGetFileInformation(String s)
at System.Reflection.AssemblyName.GetAssemblyName(String assemblyFile)
at Microsoft.SharePoint.Administration.SPUserCodeSolutionPackage.GetAssemblyName(String solutionRelativePath)
at Microsoft.SharePoint.Administration.SPSolutionPackage.SolutionFile.get_AssemblyName()
at Microsoft.SharePoint.Administration.SPSolutionPackage.SolutionFile.get_HasStrongName()
at Microsoft.SharePoint.Administration.SPSolutionPackage.AddAssemblies(XmlNode root, String strFileDirRelativeToCabFile)
at Microsoft.SharePoint.Administration.SPSolutionPackage.ProcessSolutionManifest()
at Microsoft.SharePoint.Administration.SPSolutionPackage.Load()
at Microsoft.SharePoint.Administration.SPSolutionLanguagePack.CreateSolutionPackage(SPRequest request, String name, String signature, Byte[] fileBytes)
at Microsoft.SharePoint.SPUserSolutionCollection.<>c__DisplayClass1.<AddOrUpgrade>b__0()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPUserSolutionCollection.AddOrUpgrade(SPListItem item, SPUserSolution existingSolution)
at Microsoft.SharePoint.SPUserSolutionCollection.Add(Int32 solutionGalleryItemId)
at Microsoft.SharePoint.WebControls.SolutionItemButton.ActivateItem()
at Microsoft.SharePoint.WebControls.SPLinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint

Daniel - if I understand your question correctly, Yes, AAM is configured in SharePoint 2010 and working fine.
The CRM 2013 List Component activates just fine, I will use that for now while we test CRM 2015. In my particular case I am using ADFS and IFD but I don't think that matters because I get the error the original poster is getting when I try to activate
the crmlistcomponent.wsp in the site collection (long before any interaction with CRM).

Error while uploading report in Microsoft Dynamics CRM Online

I have created a report using fetch-xml query for Microsoft Dynamics CRM Online. In this field, I have created a custom enity which has "Last Accessed Date Time" field of type "DateTime". This field stores the value in GTM. I am retrieving
the value of this field using fetch-xml query. Also, I want to calculate the difference between the current DateTime and the value (in the locale and not in GMT) of this field in "Hours Minutes Seconds" format. I
have written an expression for the same in reportas follows.
(IIF(((INT((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value), DateTimeKind.Utc).ToLocalTime(), DateTime.Now))/60))>60), INT(((((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value),
DateTimeKind.Utc).ToLocalTime(), DateTime.Now)))/60)) / 60), 0))
& "Hours"&
(IIF(((INT((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value), DateTimeKind.Utc).ToLocalTime(), DateTime.Now))/60))>60), INT((((DateDiff(DateInterval.Second,DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value),
DateTimeKind.Utc).ToLocalTime(), DateTime.Now)))/60) Mod 60), INT((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value), DateTimeKind.Utc).ToLocalTime(), DateTime.Now))/60)))
& "Minutes" &
((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value),
DateTimeKind.Utc).ToLocalTime(), DateTime.Now)) Mod 60)
& "Seconds"
This works fine in visual studio. But, when tried to upload the same report in CRM Online organization, it gives the following error.
Any idea how to solve this issue?

I have found the following useful link-
- support.microsoft.com/.../en-us
The error occurred because I have used some functions("Int", "DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value), DateTimeKind.Utc).ToLocalTime()") in my ssrs report which are not supported by CRM Online., though
it works fine in visual studio.

CRM 2015 Outlook Plugin and SCCM 2012

Good Morning!
In need of some assistance from you more experienced SCCM admins. Let me quickly run down the steps of what I've done:
1) Created a network share for CRM 2015 that everyone can see
2) Ran the EXE from Microsoft and followed the instructions from them to create the CrmClient_32.msi
3) In SCCM, created a new application, and linked the shared folder. SCCM auto-populated the install command, publisher data, etc. The only thing I added was "/s" for the MSI package to install
4) Created a Device Collection with one test PC that already has CRM 2013 installed
5) Deployed the application to the device collection with the following options:
Under Content Tab:
Content Location: \\networkshare\Installs\CRM2015
Persist content in the client cache is NOT checked
Allow clients to share content with other clients on the same subnet IS checked
Deployment options: Do not download content
Under the Programs Tab:
Installation program: msiexec /i /s "CrmClient_32.msi"
Installation start in: blank
Uninstall program: msiexec /x
Run installation and uninstall program as 32-bit process on 64-bit clients IS checked
Under User Experience Tab:
Installation Behavior: Install for system
Logon requirement: Whether or not a user is logged on
Installation program "margin-bottom:9px;padding-right:0px;padding-font-family:Arial, Helvetica, sans-serif;font-size:14px;line-height:21px;word-wrap:break-word;color:#333333;">Maximum allowed run time ( 120 minutes)
Estimated installation time (0 minutes)
6) I schedule the install (for most applications I've seen this works best)
Now when I go to Monitoring, all I see is the deployment is "In Progress" and the category is "Waiting for content"
I'm frustrated because I don't understand why this won't work. It seems so painless and the method I've described above works for almost any other application I've pushed out.
I'm all ears - is there anything you see that isn't correct? Any ideas or suggestions? If you've successfully pushed out CRM 2015 some how (even if it's not through SCCM), could you please share your solution?
Thank you so much! -Nick

Hi,
In need of some assistance from you more experienced SCCM admins
Since we are not familiar with SCCM, please refer to SCCM forums below to get more professional support:
https://social.technet.microsoft.com/Forums/en-US/home?category=configurationmanager&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Cant add Competitors on Mobile Phone App CRM 2015

I'm currently configuring the mobile phone app for CRM 2015 online.
The issue i'm having is that i cant seem to add competitors, either directly or to an existing Lead or Opportunity. Although the entity appears in the lead and opportunity records, it only shows already added competitors (which were added via the browser
or tablet app). I don't seem to have the option to add new competitors within the mobile phone app as the little "+" symbol at the top of the form is not present.
I have the competitors entity enabled for the mobile phone app and tablet app. the tablet app works fine.
I've also noticed that competitors entity appears on the tablet home page navigation but not on the mobile home page.
Any suggestions?

Hi,
This is very urgent. I have to submit the app in 2 days. Doesn'y anyone have any idea about this?? Please Help

Dynamics CRM 2015 : Email editor

Dear all,
Can anyone confirm if the email editor comes with the Dynamics CRM 2015 On-premise version and Online version?
I have many reviews saying that we have email editor in the Dynamics CRM 2015 version but I am unable to find it.
Any help/ guide would be greatly appreciated.
Many Thanks & Regards
Vinay

Hello Vinay,
The emal editor is only available with MDM (Microsoft Marketing). Check this out for reference.
https://community.dynamics.com/crm/f/117/t/151513.aspx
Regards
Abhishek
Abhishek Bakshi

CRM 2015 Update 0.1 Install Fails with SQL Error

Hi, anyone managed to install CRM 2015 Update 0.1?
The software installed fine but the DB updates fail with a SQL error. Just want to know if this is just my issue or if MS have a bug in the update. This is the SQL error:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Data.SqlClient.SqlException: The current transaction cannot be committed and cannot support operations that write to the log file. Roll
back the transaction.
Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.
All of the ORGs fail with this error, even when I try to apply the DB update via Deployment manager. I've had to back out the rollup.

The issue appears when the update process creates the index cndx_BusinessDataLocalizedLabel. This is a known cause which is under investigation internally. Currently it seems to plan to release in CRM 2015 SP1

Unable to register custom workflow activity on MS CRM 2015 Online

Hi All,
I am trying to register custom workflow activity using plugin registration tool on MS CRM 2015 Online.
Error says that 'No Plugin have been selected from list. Please select atleast one and try again'
In short my assembly is not considered as custom workflow activity.
I am giving my code let me know, If any thing is wrong.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Activities;
using Microsoft.Xrm.Sdk;
using Microsoft.Xrm.Sdk.Workflow;
namespace Training.SamplePlugin
public class SampleCustomworkflow : CodeActivity
[Input("Birthday")]
public InArgument<DateTime> BirthDate { get; set; }
[Output("NextBirthday")]
public OutArgument<DateTime> NextBirthDay { get; set; }
protected override void Execute(CodeActivityContext executionContext)
//Create the tracing service
ITracingService tracingService = executionContext.GetExtension<ITracingService>();
//Create the context
IWorkflowContext context = executionContext.GetExtension<IWorkflowContext>();
IOrganizationServiceFactory serviceFactory = executionContext.GetExtension<IOrganizationServiceFactory>();
IOrganizationService service = serviceFactory.CreateOrganizationService(context.UserId);
if (context.PrimaryEntityName.ToLowerInvariant() == "contact")
DateTime birthDate = BirthDate.Get<DateTime>(executionContext);
DateTime nextBirthDate = new DateTime(DateTime.Now.AddYears(1).Year, birthDate.Month, birthDate.Day);
//NextBirthDay.Set(executionContext, nextBirthDate);
Entity newContact = new Entity();
newContact.LogicalName = "contact";
newContact.Id = context.PrimaryEntityId;
newContact["new_nextbirthday"] = nextBirthDate;
service.Update(newContact);
If code is correct then has somebody faced this kind of issue earlier, what is resolution.
Thanks
Apurv

Have your signed your assembly ??
Microsoft Dynamics CRM Training|Our Blog |
Follow US |
Our Facebook Page |
Microsoft Dynamics CRM 2011 Application Design
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

Fetch-Xml based report (to count User Access in the last 6 months ) for Microsoft Dynamics CRM Online

Hi,
I have created a User Access report for CRM on-premise using SQl query in the following format. One row corresponds to one user in organization. Currently, I am using Microsoft Dynamics CRM Online trial version and have two users in my organization.
I want to the same report for CRM Online environment. Only Fetch-Xml based custom reports are supported by CRM online environment hence this SQL query cannot be used.
I have already written fetch-xml query to retrieve user access records ("audit" entity records) in "last-x-months" (where x = 1,2,3,4,5,6) as below.
I am able to retrieve the records with "last-x-months" condition at a time, for example, the last-2-months in my fetch-xml query only.
For, example, when I retrieve the records in the last-2-months, it also includes the records in the last month. I want to count the records in the 2nd month only that is the difference between these two. The difference will be my 2nd column.
Similarly, I want the other columns.
For the case in the above example, I have created the two separate datasets to get the record-count for the last month and last-2-months. But, I am not able to use the two datasets in the same table in my report and hence not able to calculate the difference.
Is there any way to solve this problem?

Hi,
I have modified my Fetch-XML query to retrieve all the required User Access records and removed aggregation and counting and grouping from the query as well. Did grouping and counting in SSRS. Now the report works fine as shown in the above picture.

How to migrate waiting stage workflows in ms crm 2015

Hi,
We are migrating the data from ms crm 2011 on-premise to ms crm 2015 on-line.
So how to migrate the ms crm 2011 on-premise waiting stage workflows to crm 2015 on-line?
Is there anyway to migrate these workflows or workaround? Please suggest
Its very urgent.
Thanks,
Yadav
Yadav

Hello Yadav,
If you want to migrate from CRM 2011 on premise to CRM 2015 online, unfortunately this is not possible in single step. You would have to first upgrade to CRM 2013 and then only you can upgarde to CRM 2015.
CRM 2011 -> CRM 2013 SP1 -> CRM 2015
Refer https://technet.microsoft.com/en-us/library/hh699673.aspx
For On Premise to Online migration, all customizations has to be exported through a solution. And if your database is big you need to plan your migration using a DM tool like scribe.
Now coming on to your original question, the answer is if you just migrate database, everything will be in same state as it was earlier in your old environment, and will continue the same way. The records for which workflow are in waiting state or in progress
will be resumed again automatically once the migration is completed, if you will stop "CRM Aynchronous Service" then all workflows will be in waiting state so when you will resume the service again then the system will resume those workflows again.
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

CRM 2015 Installing fails: Action MicrosoftCrm.Setup.Server.BackupUpgradeDataAction Failed Could not find the file 'C:\intpub\wwwroot\web.config'.

I don't have many issues... but when I do it is usually a bad one.
I took my CRM 2013 install running on Server 2008 and did an upgrade to server 2012 R2. No issues. All updates applied. From there I run the CRM 2015 installer to run the upgrade..... Yes, running as admin, and after the "Pre Flight
Check" everything is good. From there the install starts to copy files..... I get this error.
00:16:43| Info| CrmAction execution time; BackupUpgradeDataAction; 00:00:03.0020974
00:16:43| Error| System.Exception: Action Microsoft.Crm.Setup.Server.BackupUpgradeDataAction failed. ---> System.IO.FileNotFoundException: Could not find file 'C:\inetpub\wwwroot\web.config'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite, Boolean checkHost)
at Microsoft.Crm.Setup.Server.BackupUpgradeDataAction.Do(IDictionary parameters)
at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
I am finding no references to this issue any where. Looking for suggestions. It appears that this file does not actually exist. Somewhere during the upgrade maybe it got deleted. I have put an old web.config file in this
path, rebooted everything and still get the same error.
Looking for some suggestions.
Pierre Hulsebus

Sounds like a problem with the information about where the Crm website is installed. Crm uses 2 registry values 'website' and 'websitepath' under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSCRM. Do these look correct, and is the Crm website under c:\inetpub\wwwroot,
or elsewhere ?
The last part of the 'website' value is the website id, which you can see in IIS Manager
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

Microsoft Dyamics CRM 2015 : Current Geospatial Capabilities

Similar Messages

Maybe you are looking for