Microsoft Dynamics CRM 2013 Google Chrome not populating popups working correctly with pop ups.

If incorrect forum, just alert and move. I am having an issue with hosted Microsoft Dynamics 2013 and Google Chrome latest release, 31. This just started with the hosted version of Dynamics CRM 2013, Chrome had been working correctly with
our earlier version of CRM.
When users on latest version of Chrome, 31, login to Dynamics CRM 2013, everything looks fine. Issue is specifically, for sales folks, when they open a client record, and where the client info is located, there is a standard date and time and tiny
little calendar you can pull up if you click on it. When the user clicks on the tiny little calendar, they DO get a pop up, but the pop up is blank. And, there is no error message at all. Nothing freezes, nothing bad happens at all, except
for the salesperson, who live and die by their calendars and ability to schedule appointments and see exiting appointments.
This is not some in house coding issue. It is a generic CRM phone call record that has this issue.
Again, no errors, nothing crashes, but Dynamics CRM 2013 is useless to Google Chrome users in house because of this. Which, in a support position, is terrible. Users who got an upgrade, have their favorite interface rendered useless. And these
are sales folks. And, I did all settings according to what I was able to find for CRM 2010 and Chrome, for when pop ups do not work, and all settings were already correct for pop ups, website is in trusted sites, etc, which is what I expected, since
everything worked on CRM 2010.
Any clues or ideas? Thank You.
Rick

We don't know. Better to ask over here.
https://community.dynamics.com/crm/f/117.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

I am being repetedly asked to verify certificates and also cannot use xmarks as it does not appear to work correctly with my current version of firefox (8.0) and my mac 10.6.8. I tried removing and reinstalling but unsuccesfully.

whenever i start firefox i receive a message saying that the certificate is not recognised - it is a certificate relating to xmarks.
in fact upon installation i received another message stating that it wouldnt work correctly with my version of firefox. now i have updated firefox but receive the same message.
thinking that it was an issue relating to certificates i went into "preferences" and removed all the certificates in the "authorities" section also given that i didnt recongnise any of them (e.g. turktrust!!).

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

Error while installing the Microsoft Dynamics CRM 2013 Report Authoring Extension set up

HI Experts,
I am trying to install Report Authoring extension tool to work with MS CRM 2015 online reports but unable to install, getting below error even though I am having VS 2013, SQL Server 2014 and Data tools for VS 2013 installed on my machine.
Please help me to fix this issue.
When I double click the error getting below error.
Error : Business Intelligence Development Studio is not installed for Microsoft SQL Server Reporting Services.
When I click the details , getting below error.
Thanks
Baji Rahaman

The Report Authoring Extensions (any version) don't support VS 2013. Currently the Crm 2015 Report Authoring Extensions support VS 2012 and VS 2010, and the Crm 2013 Report Authoring Extensions supports only VS 2010.
By the way, the error you posted suggests you're trying to install the Crm 2011 Report Authoring Extensions
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

Does Eloqua Integrate with MicroSoft Dynamics CRM 2013 and or 2015

We are planning to upgrade from Dynamics CRM 2011 to 2013 or 2015. I cannot find information to confirm Eloqua will integrate with the newer versions of Dynamics CRM. I 'hear' Eloqua will integrate with 2013. Does anyone integrate Eloqua with Dynamics 2013 or 2015?

Hello-
We actually integrate with MS Dynamics, both 2013 and 2015 versions and would gladly help you.
Feel free to visit our website for more info: www.putitforward.com/omc
Here's a video on our YouTube channel about MS Dynamics 15 to Eloqua integration.
Hope this helps!
If you have any additional questions, let me know and I'll send you more info.

Database update failed for some organizations when installing Update Rollup 1 for Microsoft Dynamics CRM 2013 Service Pack 1

Hi,
We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
Does anyone know how to fix this problem?
09:10:41| Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115. Continuing with other orgs. Exception: System.ArgumentNullException: Value cannot be null.
Parameter name: type
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type)
at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

Hi,
We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
Does anyone know how to fix this problem?
09:10:41| Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115. Continuing with other orgs. Exception: System.ArgumentNullException: Value cannot be null.
Parameter name: type
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type)
at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

Object scaling does not seem to work correctly with objects containing Bezier curves

I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
Thanks for any suggestions or ideas.
-Bubba
ps - i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)

Bubba,
Referring to post #16 (trying to get it more right from the start than in post #15),
the scaling will be symmetric with parallel segments if the original object is rotationally symmetric and reflectionally symmetric about two orthogonal axes, and that is also the case.
The scaling of the object in post #16 is in fact symmetric because corresponding segments of original and scaled object have the same distance all the way round.
The five star in the OP is rotationally symmetric but only reflectionally symmetric about one axis, so the segments are parallel, but the scaling is not symmetric because there different distances between corresponding segments, even though you were actually satisfied with it:
The first star shows the effect I'm trying to get and the second shows the problem
This could be mended by scaling from the centroid.
If you need to have the same distance between all the segments of original and scaled object, with scaling you are restricted to objects where all segments start and end at the same distance from the centroid, as in regular polygons (including the square), regular stars, and the circle (with its curved segments). Objects with curved segments derived from regular polygons and stars will have varying distances and non parallellism within each segment.

KB3008923 Makes Microsoft Dynamic CRM 2013 add/change javascript in Form Dialog impossible - Fix is use CHROME or remove update.

After KB3008923 was installed on my computer we found out that in Microsoft Dynamic Crm 2013
we could not change Form Script or add Form scripts as the dialog adding/maintaining this did not work
any more. The dropdown box is empty and the function and parameters are gone.
Fix is to remove KB3008923 or use CHROME until Microsoft fixes it!

REPOSTING...
Some web application modal dialog boxes don't work correctly in Internet Explorer 11 after you install update 3008923 (17 Dec-14)
http://support2.microsoft.com/kb/3025390/en-us
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

MS Dynamics CRM 2013 install via GPO

Good Morning,
I need to rollout MS Dynamics CRM 2013 to all 180 of my users. I would like to do this via GPO but I only have the .exe install files and no .msi files. I have adhered to the following -
http://technet.microsoft.com/en-us/library/hh699775.aspx
I have followed the steps under the section Create the CRMCLient_bitversion.msi file
but I am not achieving any administrative installation files. For example I have a network share setup as follows -
\\server\crm_files\test
I have mapped a network folder via command prompt using the net use command to map the Z: drive to
\\server\crm_files. As per the instructions I have run the following command -
CRM2013-Client-ENU-i386.exe /a /q /targetdir \\server\crm_files\test
When I run this command I am prompted to click Run or Cancel so I click Run. After 2-3 seconds I then get a dialog box showing the different switches that I can run with the only other option being to close the box. After closing the box I look in my
test folder and it is empty.
Should there be something in the test folder? Have I run the wrong command string?
EDIT: Please note that I only have the installation/.exe file for CRM 2013. The article on the link I posted earlier mentions an XML file that is included with the installation files. I do not have this XML file.
Jeet S

Hi,
Have you checked this article?
Install Microsoft Dynamics CRM for Outlook using a command prompt
==============
CRM2013-Client-ENU-i386.exe /a /q /targetdir \\server\crm_files\test
The command here is not in the right way, we need first to extract files from the
CRM2013-Client-ENU-i386.exe, under the folder we will find the
SetupClient.exe and the mentioned XML files.
Run this command to extract the file:
CRM2013-Client-ENU-i386.exe /extract
Then use the command below to create an MSI file:
Setupclient /Q /A /targetdir "\\share\mscrm_client_admin"
Besides, for Microsoft Dynamics CRM 2013 deployment, we'd better ask in the forum below:
Microsoft Dynamics CRM Forum
http://community.dynamics.com/crm/f/117.aspx?pi49901=0
Best regards
Michael Shao
TechNet Community Support

How to Repair Microsoft Dynamics CRM Server 2013 once the update rollup or service pack is installed?

Hello,
I am going through the following Technet article:
Repair Microsoft Dynamics CRM Server 2013 (
https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
Thank you,

Hello,
I am going through the following Technet article:
Repair Microsoft Dynamics CRM Server 2013 (
https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
Thank you,

Signed DocuSign documents are not updating in Microsoft Dynamics CRM record

My organization uses DocuSign with our Microsoft Dynamics CRM Online instance.
When we first applied the DocuSign solution, we could send documents using the Send with Docusign feature and a signed version would be automatically up[dated in the same CRM record when the process was complete.
Recently, the signed copies are not updating in the CRM.

We don't know. Better to ask over here.
https://community.dynamics.com/crm/f/117.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to improve performance for bulk data load in Dynamics CRM 2013 Online

Hi all,
We need to bulk update (or create) contacts into Dynamics CRM 2013 online every night due to data updated from another external data source. The data size is around 100,000 and the data loading duration was around 6 hours.
We are already using ExecuteMultiple web services to handle the integration, however, the 6 hours integraton duration is still not acceptable and we are seeking for any advise for further improvement.
Any help is highly appreciated. Many thanks.
Gary

I think Andrii's referring to running multiple threads in parallel (see
http://www.mscrmuk.blogspot.co.uk/2012/02/data-migration-performance-to-crm.html - it's a bit dated, but should still be relevant).
Microsoft do have some throttling limits applied in Crm Online, and it is worth contacting them to see if you can get those raised.
100 000 records per night seems a large number. Are all these records new or updated records, or are there some that are unchanged, in which case you could filter them out before uploading ? Or are there useful ways to summarise the data before loading
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

Windows 10 and Dynamics CRM 2013 Outlook Client - Identity Foundation missing

How can I install/activate the Identity Foundation in Windows 10.
In Control Panel\All Control Panel Items\Programs and Features the feature is missing.
Dynamics CRM 2013 (and 2011) Outlook Client does need the Identity Foundation:
Error is "Could not load file or assembly 'Microsoft.Identity.Model, Version=3.5.0.0 ...
icomedias Austria - Germany

I've had the same problem with the CRM 2011 Plug-in.. It is not possible to install the Windows Identity Framework onto Windows 10 since it was not included as an option in the "Features" menu.
Also - I found this forum entry discussing that exact problem (with no answer, so far):
Windows Identity Foundation not working with Technical Preview
EDIT: Fixed link. Inside of the linked discussion thread, I see this:
"From Windows 8.1 Features Screen:
WIF 3.5 has been superseded by WIF classes that are provided as part of .NET 4.5. It is recommended that you use .NET 4.5 for supporting claims-based identity in your applications.
so i guess they removed it completely in Windows TP"

Coded UI automation support for MIcrosoft Dynamic CRM 2013

Hi,
I have been checking for a UI automation tool for Microsoft Dynamic CRM 2013. Even though it is mentioned as coded UI fully supports Dynamic CRM, I was not able to automate CRM with VS2013, VS2015 Preview. Please reply if you have any workaround to make
it possible to automate UI testing of CRM 2013 using coded UI.
Regards,
Vinu chandran.

Hi Vinu,
According to your description,
could you please tell me what version of VS you use to test your coded UI test?
In addition, I did some search and don’t find any information about CRM2013 support for Coded UI test.
Based on this article:
Supported Configurations and Platforms for Coded UI Tests and Action
Recordings, Dynamics CRM web client is fully supported. Even though I am not sure whether it includes CRM2013, I suggest you should use VS to drag the crosshair
on the control to check the control can be identified by Coded UI Test.
In addition, since the issue is related to the Microsoft Dynamic CRM, I suggest you can ask the issue to
Microsoft Dynamic
CRM forum, may be you will get better support.
As you said that you are not able to automate coded UI test with VS2015 Preview, because VS2015 Preview is still a preview version
instead of final released version, I suggest that you should submit this feedback to Microsoft Connect feedback portal:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,
Microsoft engineers will evaluate them seriously.
After you submit the feedback, you can post the link here which will be beneficial for other members with the
similar issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ECC 6.0 integration with Microsoft Dynamics CRM

Hi All
I am working on a ECC 6.0 integration with Microsoft Dynamics CRM. I need to send the customer master data, va01/va02, vl01n/vl02n/ vf01/vf02 to CRM system. One option I have is to send in the form of IDOC with TRFC - TCP/IP. But looks like this needs a middleware like Biztalk.
Is there a way I can send this data using a Internet service in ECC 6.0 ??? As this would cut the cost of the Biztalk.
I really appriciate your thoughts on this. We don't have XI either.
Thanks a lot
Van

HI Van Dan Jan,
We have just implemented integarion of SAP with Microsoft stack (Microsoft CRM, Share point and Axapta), But in all integration BizTalk as a middleware used.
There is two way requirements :
1. whenever Most of the control are at the Microsoft level like : Customer creation, Creation of orders, which need to be synchronus activity we have used RFC which internally calls BAPI. (So SAP adapter Configured at BizTalk). and whenever Biztalk receives request file from CRM or share point to there location they call SAP RFC's.
2. When DATA is needed from SAP to microsoft stack like to syncronize the missing transaction like customer pad and all.
Scheduled job at BizTalk end which call SAP to get the DATA via RFC mode :
In SAP we have two things
1. if DATA size is small (below 2 MB) like in last 1 hrs what are the sales contract created in SAP that need to updated in Microsoft other system than Biztalk will trigger a job at 1 hr interval or on deemand to get the detail which directly we pick from data base or using BAPI to get the detail via RFC.
2. If Data Size is large (more than 2 MB) like total transation happened in a day for all customers: then we wriiting the data in OS or application server and that job also get initiated from Biztalk end by sending any parameter to SAP.
advantage of using BizTalk is most of the control you can give it to them so they can run there job on deemand basis.
There is a something known as web service we can use to avoid Interfacing tool, but I dont have much Idea about that,
and please check how many interfacing point is there with SAP in your project, because if Interfacing points are more then I think it is not good to write a web services for so many things.
do let me know if you need further information.

Error while uploading report in Microsoft Dynamics CRM Online

I have created a report using fetch-xml query for Microsoft Dynamics CRM Online. In this field, I have created a custom enity which has "Last Accessed Date Time" field of type "DateTime". This field stores the value in GTM. I am retrieving
the value of this field using fetch-xml query. Also, I want to calculate the difference between the current DateTime and the value (in the locale and not in GMT) of this field in "Hours Minutes Seconds" format. I
have written an expression for the same in reportas follows.
(IIF(((INT((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value), DateTimeKind.Utc).ToLocalTime(), DateTime.Now))/60))>60), INT(((((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value),
DateTimeKind.Utc).ToLocalTime(), DateTime.Now)))/60)) / 60), 0))
& "Hours"&
(IIF(((INT((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value), DateTimeKind.Utc).ToLocalTime(), DateTime.Now))/60))>60), INT((((DateDiff(DateInterval.Second,DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value),
DateTimeKind.Utc).ToLocalTime(), DateTime.Now)))/60) Mod 60), INT((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value), DateTimeKind.Utc).ToLocalTime(), DateTime.Now))/60)))
& "Minutes" &
((DateDiff(DateInterval.Second, DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value),
DateTimeKind.Utc).ToLocalTime(), DateTime.Now)) Mod 60)
& "Seconds"
This works fine in visual studio. But, when tried to upload the same report in CRM Online organization, it gives the following error.
Any idea how to solve this issue?

I have found the following useful link-
- support.microsoft.com/.../en-us
The error occurred because I have used some functions("Int", "DateTime.SpecifyKind(DateTime.Parse(Fields!new_lastaccesseddatetime.Value), DateTimeKind.Utc).ToLocalTime()") in my ssrs report which are not supported by CRM Online., though
it works fine in visual studio.

Microsoft Dynamics CRM 2013 Google Chrome not populating popups working correctly with pop ups.

Similar Messages

Maybe you are looking for