Microsoft error related to xbox controller problems?

Everytime I boot up my PC with my xbox controller plugged in ( more specifically, my Xbox One fightstick controller), I receive this error message. My visual files are up to date so it's not that. What is this?
"Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C...
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information."
Along with the Xbox logo icon on my toolbar glowing orange.

Hi JohnTheMountain,
In addition to the error you received, please also take a check into event Viewer and see if any other errors logged.
Besides, please try to update your Xbox controller related software from the link below, then check to see if issue insists.
http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows
Best regards,
FangZhou CHEN

Similar Messages

  • Cannot open Itunes- Microsoft error

    Every time I try to open Itunes 7.1 I get a Microsoft error saying it encountered a problem and needs to close. I have tried installing and reinstalling and It continues to come up with this message and it will not open. Any suggestions? I should never have decided to try to upgrade.

    replying to jigglydudesis
    I have a K-Lite codec pack installed on my computer, I don't remember what version but its been less than a month since I downloaded the it. Are their any known problems between the two?
    afraid so. the problems usually arise when the versions of the QuickTime codecs that come with the Pack are out of sync with the mimimum QT version requirement for the particular version of itunes you're running.
    for example, itunes 5.0.x required at least QT 7.0.2, and K-lite Packs with the QT 6.5.2.10 codecs broke QT 7.0.2, which broke itunes 5.0.x.
    itunes 6.0.x required at least QT 7.0.3 ... and ACE Packs containing the QT 6.5.2.10 codes would break that.
    itunes 7.0.x requires at least QT 7.1.3. i've already seen a report of a version of the ACE Pack breaking QT 7.1.3:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=3226147
    ... and a report of a K-lite Pack containing the QT 7.0.3 codecs breaking a QT 7.1.3:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=3311325
    it might not just be the codec mismatch that is causing the grief. in at least one case i've seen a report of a K-Lite pack installing an earlier version of qttask.exe (it's a quicktime background process and startup item) on a PC, and and a version mismatch between your QuickTime Player and qttask.exe could cause all manner of grief when upgrading or launching QT:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=3212208
    ... but whatever the precise mechanism, the upshot is that the mega codec packs can break your QuickTime in nasty ways, resulting in a broken itunes that won't launch.

  • Upgrade issue - MicroSoft error!  Afraid to uninstall and lose music!

    Okay friends, I went for the upgrade to 7.0 and now I'm getting MicroSoft errors - "iTunes has encountered a problem and needs to close." I'm about to uninstall and then reinstall an older version of iTunes. Silly question here - but - if I uninstall, will I lose all of my music?

    To be on the safe side, go to the folder where your music is stored, copy all of it to a folder outside of the iTunes folders and then uninstall/reinstall to your heart's content

  • ChaRM: Internal Phase Controller Problem

    Hi Team,
    I am working in Sol Man ChaRM. My scenario is as below:
    We would like to create two maintenance projects one for nomal corrections (SDMJ) & another for SDHF corrections.
    I have successfully created one mainteance project for SDHF corrections (Activated ChaRM check box) in SOLAR_PROJECT_ADMIN.
    I am trying to create one more maintenace project to handle normal corrections (SDMJ) in SOLAR_PROJECT_ADMIN. Both two projects uses same logical components. When i try to activate the check box "Activate ChaRM" in the second project, i am getting below error.
    Internal Phase Controller Problem
    Message no. /TMWFLOW/TASKLIST176
    Diagnosis
    The system was unable to generte the task list due to an internal error in the phase controller.
    For more information, see the application log (choose Messages on Generation).
    Need your valubale input to solve the error.
    Thanks
    Kumar

    Hello Kumar,
    If applicble for your release and SP level you may want to review and implement the following notes:
    #927124, #1011376 and #987927
    They should help you in solving your problem.
    Also please refer to the following link, where you find a summary of
    the steps that should be done to prepare the CHARM scenario:
    "First steps to work with Change Request Management scenario"
    First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
    Further details can be found in the following SDN blogs:
    "Change Request Management scenario: Usual questions"
    http://www.sdn.sap.com/irj/scn/weblogs;?blog=/pub/wlg/15116
    "Change Request Management scenario: Working examples"
    http://www.sdn.sap.com/irj/scn/weblogs;?blog=/pub/wlg/15117
    Regards,
    Paul

  • I use word for mac and keep getting an error message microsoft syn services has encountered a problem and needs to close.  tell microsoft about this problem. even if i clicked send info to m/soft the message still comes up repeatedly i've turned comp off

    i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

    i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

  • Adobe Digital Ed 4.0 will not open -- gets a Microsoft error message "encountered a problem and needs to close"

    Does not open.
    Instead Microsoft error message "encounters a problem and needs to close".
    I have already tried the uninstall & reinstall "solution".
    What else can I do.  I have a paid for document I would like to read.
    Thanks.

    Hi ynotcookit
    Please make sure that antivirus has been disabled...
    Check the .net framework installed on the machine and update it, if required
    Also, Let us know the exact OS that you're using?
    Thanks,
    Mandeep

  • Getting a microsoft error report when trying to run Quicktime

    I have dell laptop which has windows XP. I was not able to run Itunes because I got an error that said that microsoft has encountered an error and i choose to send an error report or not. so i uninstalled and reinstalled itunes and quicktime with no avail. After going these forums, I uninstalled itunes and only installed the quicktime standalone player and i get the same error which tells me the problem is with quicktime. I tried all the stuff on the forum but cannot get quicktime to work which then means I cant get itunes to work which totally *****! any ideas? I wish Apple had a phone/chat support like dell.

    I am also having this issue with a new Dell laptop which runs Windows XP tablet edition. I have tried installing QT 7.5.5 twice, and even installing an older version (7.1.6). Every time I try to open QT I get a brief error message on the screen after which it crashes and restarts the system....very frustrating....

  • ITunes won't upgrade to10.5. Error message "There is a problem with the Windows installer package. Contact the package vendor". I need help.

    iTunes won't upgrade to10.5. I'm on 10.1.17.
    When installing 10.5 it terminates with an error message "There is a problem with the Windows  installer package. Contact the package vendor".
    It does not provide an error code or details/description to further troubleshoot. As a result I can't upgrade my Apple devices to leverage the cloud.
    Any smarts out there who could help?
    Using PC Win-7 w/IE 7 (should that matter)
    Thanks much

    I know there's a million threads like this, but I thought I'd record my experience.  I, too, was having the original poster's error when I tried to update iTunes on Windows XP.  I think I was stuck on 10. 
    I solved it by un-installing iTunes and every other Apple app.  I discovered that Apple Software Update would not un-install as its MSI file could not be found.  I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs.  Google "kb290301" for a Microsoft page that includes a download link for it.  After that, I was able to install a fresh copy of iTunes 10.5.2.
    I'm not sure why this app's folder and MSI were missing from my computer.  I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

  • Can't get itunes to install. Microsoft error message, an error has occured.

    I have purchased an ipod - great. I tried to download the software provided. At the very end of the download a Microsoft error message appears stating an error has occured and needs to close. Send error report yes/no.
    Okay - I tried the uninstall - "repair: through MY COMPUTER, still no luck. Same error message comes up.I then completely unistalled itunes from my computer.
    I then went to Microsoft to update my computer. My computer was up to date. I have a Dell computer with Windows XP Home edition with service pack 2. I then went to Dell and checked with them. Computer is up to date.
    I then called Apple who walked me through the steps to download Quick Time and itunes from the internet. Quick Time downloaded, but iTunes did not.
    We then did the "msconfig" and tried again. Same thing, an error message occured. Apply said it was a Microsoft problem.
    I contacted Microsoft, they checked the computer and said there was no problem. To be on the safe side, I reinstalled Microsoft on the computer to ensure I wan not missing any files.
    I then went back on line to Microsoft to make sure my computer was up to date. I also ran the Window's Install clean up to ensure all was removed.
    I called Apple again. They walked me through the same process and after two hours still the same error message. I service tech then tried to transfer me to a supervisor but instead hung up on me.
    HELP! What else do I need to do to get this to work?

    EVERYONE PLEASE!!! I do NOT mean to be UGLY but it is incredibly DIFFICULT to help when I have eleventy million people popping in for help in someone else's thread. PLEASE, I Beg of you, POST YOUR VERY OWN THREAD WITH YOUR ISSUES, Windows OS, Service Pack, Antivirus and Firewall Software, any error messages, etc. That way I can help each and every one of you without feeling like I need to pull may hair out. It is against forum rules to threadjack another user's post anyway. Thank you. I will ignore this thread if threadjacking continues and no one will get advice.
    I appreciate it greatly.
    Cheers,
    Rachyl

  • Microsoft Office Excel has encountered a problem and needs to close

    Hi,
    I am executing the following code in an excel application and while closing excel I am getting the error
    'Microsoft Office Excel has encountered a problem and needs to close'.
    EnterpriseSession boEnterpriseSession;
    ReportEngines boReportEngines ;
    IReportEngine boIReportEngine;
    CrystalDecisions.Enterprise.SessionMgr loginSessionManager = new CrystalDecisions.Enterprise.SessionMgr();
    CrystalDecisions.Enterprise.EnterpriseSession boEnterpriseSession = loginSessionManager.Logon("userName", "password", "cms", "authentication");
                        int iMinuteNumber = 1;
                        int iLogonNumber = -1;
                        string strToken = boEnterpriseSession.LogonTokenMgr.CreateWCAToken("", iMinuteNumber, iLogonNumber);
                        boReportEngines = new ReportEngines(strToken);
                        boIReportEngine = (IReportEngine)Session.boReportEngines.getService(ReportEngineType.WI_ReportEngine);
    The exception that is displayed while debugging is 'BusinessObjects.ThirdParty.OOC.OB.AssertionFailed'.
    Thanks,
    Divya
    Edited by: dpanicker on Jun 23, 2010 6:47 AM
    Edited by: dpanicker on Jun 23, 2010 7:26 AM

    I'm curious how you are running this code within excel as I would expect you would've had to write a dll to expose the SDK as COM in order to be able to access it from an excel document.

  • MICROSOFT ERROR MESSAGE

    Dear All
    I gather this question has been asked before, but any replies to that question don't answer the difficulties I have at present !!
    I recently bought an ipod and, to be honest, I wish I had spent the £200 on something more worthwhile ....
    As instructed, I downloaded the latest version of Itunes from Apple .... that's when the problems began ....!!
    Each time I attempt to open Itunes, it fails to do so and I'm met with the standard Microsoft error message asking if I wish to report the matter to Microsoft ....
    From reading other questions on this forum, I gather the problem rests with Quicktime which, somehow, has become 'corrupt' during the installation process (although how this can be given the whole installation process is automated is beyond me !!).
    Apple suggests the uninstallation of itunes and Quicktime .... easier said than done ....!
    I have been able to remove itunes, however, I am met with the following error message when I attempt to remove Quicktime using 'Add/Remove Programs' -
    'The following file does not exist, or is not a valid uninstallation log.
    C:\WINDOWS\System32\Quicktime\Uninstall.log'
    I've attempted to uninstall it via C:\Program Files only to be met with the same message ....
    Neither System Restore or Windows Cleanup Facility (again suggested by Apple !) remove it .... in fact, nothing appears to be able to remove it !!
    I attempted to download the 'stand alone' version of Quicktime without itunes (again from Apple !) in the hope that it would overwrite the 'corrupt' version, only to be told when I tried to install it that a more up to date version of it was already installed and running in my PC .... kinda frustrationg given I got both versions from Apple !!!!
    I am now faced with the situation where I have an Ipod I cannot use and a new PC which has a corrupt program running in it which I also cannot remove !!!!
    As I say, I wish I spent the money elsewhere !!
    Can anyone help with this one PLEASE !!!!!!
    NEW Ipod 30GB   Windows XP Pro  
    NEW IPOD 30GB   Windows XP Pro  

    seems this is a common problem, has anyone found a way to have windows allow itunes to install when you run into this problem. i am now going on almost a year and 3 ipods later trying to solve the problem of downloading itunes!

  • "Microsoft Sync Services has encountered a problem and needs to close"

    whenever I try to sync entourage with iCal or Address Book, I get the following message: "Microsoft Sync Services has encountered a problem and needs to close". I can't seem to get it to stop. Anyone have any ideas?
    Thanks!
    Chris

    I finally solve this problem in my imac....
    For Snow Leopard (Mac OS X v10.6 Snow Leopard):
    1 In the Finder, choose Utilities from the Go menu.
    2 Open Terminal.
    3 In the Terminal window, type or paste the following command on a single line:
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl reset
    4 Press Return.
    5 When the operation is complete quit Terminal.
    For Leopard (Mac OS X v10.5 Leopard)
    1. In the Finder, choose Utilities from the Go menu.
    2. Open Terminal.
    3. In the Terminal window that opens, type or paste the following command on a single line:
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full
    4. Press Return.
    5. When the operation is complete quit Terminal.
    Source: http://support.apple.com/kb/TS1627
    Note: I'm using Snow leopard when I enter the command..it gives me some error however, I used the command for normal leopard it works for me no more annoying error sync...:) it may works on yours too worth of try.

  • HELP!HELP!HELP!  Microsoft error message

    Please help! When I try to edit a certain scene IN FLASH CS3,
    microsoft error message pops up to send an error report. i was just
    using that scene earlier today. WHAT THE HELL HAPPENED?
    i can't even test the scene or movie! please help!
    message:
    Error signature
    Appname: flash.exe AppVer 9.0.0.494

    Hi, did you find a solution to this? I have the same problem
    - except I can't even open any of my Flash files now. I'm heading
    to tech support.

  • Itunes Microsoft Error

    I recently reformated and when I tryed to open Itunes it said microsoft error report. C:\DOCUME~1\Owner\LOCALS~1\Temp\WER1C4.tmp.dir00\appcompat.txt is the technical problem it gave me. This happend last time I reformated as well and I somehow fixed it by uninstalling and doing something else (which i forgot) but now that I forgot how to fix it im stuck.

    I would venture to guess your Hard Drive has corrupted sectors. Open 'My Computer' right click on 'C' (assuming that's your primary drive designation) go to 'Properties' select the 'Tools' tab and check for errors. This may entail a reboot and a lengthly check. Look for options to automatically recover bad sectors/data.
    Post results here.

  • Microsoft Error Reporting

    Cant open Office, or office files, even after re-istall of Office 2008.  Keep getting Microsoft Error Reporting message box.

    Is a Trial version of Office also installed? That can cause problems if you install the full version with the trial still in place.
    If that''s not the probelm, you'll do better to use the MS Office:Mac forums here:
    http://www.microsoft.com/mac/support

Maybe you are looking for