Microsoft Excel Physical Architecture not possible to create.

Hello:
I´m using ODI 11.1.1.5 and I have problems to load a simple Excel file.
Following instructions of different blogs, I don't have in ODI the Microsoft Excel "Technology" under the "Physical Architecture Section" under "Technologies" folder.
I only have a "File" folder inside "Technology" folder.
When I try to create a new technology, I get a message saying: "Unable to save Microsoft Excel (ODI-17591: Name 'MICROSOFT_EXCEL' is already used)"
Can anyone help me with this?

Are you trying to create a dataserver under Excel or actually create a new technology?
I think you want to right click excel and add a dataserver, try a different name - It might be getting confused with the code derived from the name you are currently providing.

Similar Messages

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

Error : Modification not possible- while creating source system in BI7

Hi BI Guru's,
We are using BI7 and source system ECC6 ,We are about to move to production, When creating the source system in BI PRD system we getting the Error Modification not possible.we created RFC connection, background user and remote connection works fine.
Is there any body put some light on this issue
thanks in advance,
Regards,
Mohan

Mohan,
Check if your logical systems are in place in SCC4 and also in the transport connection.
Also check if you are connecting to the source system by IP Address or by logical name.
Accordingly you would have to maintain the source system connections.
Arun

Workbook created in microsoft excel 2007 can not be opened in excel 2010

Dear All,
I have few workbooks .xlsm which were created in microsoft excel 2007 and were running fine in 2007 excel. Now microsoft office is migrated to 2010 excel. when i try opening the same workbook .xlsm then i get the following error message "Work book is corrupted and can not be loaded".
Anybody faced such issue any time? Any remedies for this? Please share.
Thanks,
Vijaya

Hi Vijaya,
Update your SAP GUI 640 or 7.
it will work.
Thanks and Regards,
Venkat.

It seems not possible to create this kind of "Brush" in Photoshop CS6, can anyone help?

I found this website.
http://newhive.com/andrew/drawonme?q=%23All%2F
And I thought this "brush" is a really cool technique for fast sketches. But it does not seem possible in photoshop, does it? I tested it with CS5 and even the new CS6 Brushes.
Thanks for any help

If I understand correctly the »thing« about this Brush is that it creates individual lines that interact with existing strokes by fanning them out when in proximity to an existing path.
I think this is not possible with a Brush in Photoshop what with it being a pixel oriented application (with some vector functionality, though, fortunately).

Is it not possible to create a PR with Fixed vendor without an Info-record

Hi,
We have a requirement in which data necessary for PR(Purchase Requisition) creation ( replenishment orders ) comes from a legacy system and we use the BAPI -BAPI_REQUISITION_CREATE to create the PR's.
The problem is when we try to create PR by using plant in the field fixed vendor present in Source of Supply tab, we are getting the error message, "Inforecord for Vendor xxx and material xxxx does not exist ". This message is due to the plant given in fixed vendor field and missing info records. And we always use only "plant" as fixed vendor.
Is there any way to avoid the determination of info records based on fixed vendor?
Thanks in Advance.
Edited by: Dagny on Aug 28, 2009 3:01 PM
Edited by: Dagny on Aug 28, 2009 4:30 PM
Edited by: Dagny on Aug 31, 2009 11:09 AM

Kurt Lang wrote:
It is more than well known that Flash is not supported on the iPad or iPhone. Adobe officially threw in the towel even attempting to get a working player for mobile devices that one, doesn't chew up battery life; two, doesn't eat up so many system resources.
The focus now is on Adobe AIR and HTML5. So don't expect to ever see Flash for the iPad.
I don't understand the reply. This is the Power Mac forum. Is the real problem finding a PowerPC version of Flash and Adobe Reader? If so, Adobe dropped Flash support for PowerPC in February.
http://lowendmac.com/ed/bashur/11db/powerpc-flash-support.html
How evil is this? Well, Apple itself no longer supports PowerPC in its last two major OSs, 10.6 and 10.7. So the problem here is a very old Mac.
There is an Adobe Reader for PowerPC.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5245
Adobe kept putting out PowerPC updates longer than Apple did!
Also, Adobe Reader is available for iOS, if that was part of the original question.

Partition layout greyed out – not possible to create a third partition

Hi all,
Being in need of a new laptop, I bought myself a Macbook Pro retina, 13inch, 512gb SSD last weekend. I’ve been a windows user for almost 20 years now, with occasional exploits into Unix/Linux, but I’ve had it in mind to try out OS X for quite a while. I like the hardware and the design of the Macbook Pro and the fact that Boot camp promised to make dual booting into win7 a walk in the park, lead me to just try it out. However…
When I tried running boot camp (based on creating bootable USB’s):
ISO number 1 first didn’t get recognized by boot camp
Omitting the bootable USB creation by boot camp, downloading the drivers on a separate USB stick and using my own bootable USB lead boot camp to state that it didn’t recognize a windows install disk (even though the USB is bootable and does work)
Creating a full new ISO and using that one to create a bootable USB by boot camp worked, but gave an error during the copying of the files (can’t create USB, error during copying windows installation files)
Making a new image of that ISO within OS X to avoid compatibility issues gave the same error
Using another USB stick gave the same error
Unmounting the image still gave the same error
At that point I gave up on wanting to use boot camp and I decided to do the install myself. Going to disk utility to create new partitions triggered a new issue:
Via the “+”-sign, I can create a second partition on my drive. I can name that partition, format it any way I want and make it as big as I want.
After doing that, the “-“-sign is available to remove that partition again and to merge all back into one big HFS partition.
The tool doesn’t allow me to create 3 partitions though. The partition layout box is greyed out and fixed on “current”, and after the second partition is created, I can create a third one
Rebooting and doing disk utility via CMD+R gives the same issue.
I looked on the internet, found people with similar issues, but until now no real solution (unless a “boot via USB and partition from there”-solution, which I didn’t try yet).
Why doesn’t the system allow me to create 3 partitions?
What can I do to still create 3 partitions?
Is working via a bootable OS X USB really the only way to do this?

user10274248 wrote:
So can anybody help how to create a volume group actually and how to create a logical volume under volume group.LVM is not recommended in Dom0, which is why support for LVM has been removed from the installer. LVM is not cluster aware and does not support write barriers, both of which are important for a filesystem that is used for storing file-backed disk images.

Not possible to creat Belgian i-tunes account in i-tunes 8

Good afternoon,
It seems to be impossible to create an account in i-tunes with a belgian visa card. The system keeps, asking for a Dutch billing address.
Read my full story here please:
http://forums.macrumors.com/showthread.php?t=593070
Many thanks to clarify asap.
Kind regards,
Koen Delrue

Hello,
Apple was only able to obtain licensing for media distribution in certain countries. I have a feeling that if they had it their way, iTunes would be available everywhere. In an order to combat users creating accounts for countries other than where s/he resides, they've had to ensure that if (for example) you are creating a US iTunes Store account, the user and the computer are physically located in the US, and that the credit card used to pay for the downloads is US based with US billing info.
Incredibly frustrating, I'm sure, for those who live in a country other than where iTunes is available.
You can, however, still obtain album artwork for your library. It's just that it won't download automatically from the iTunes store. (Which I've come to find doesn't always work so great anyway).
1. Right-click on a track (or multiple tracks selected at once) and go to Get Info
2. Select the Artwork tab for a single file, or the Info tab for multiple files
3. Drag the image from the Internet (Google Image searches, and Amazon work well) into the appropriate field
CG

Template Selection Not possible whicle creating Project Structure

Hi All,
When I am creating a new Project, I am unable to select the template are created in teh system. The field does not display any values.
Do reply with your valuable answers.
Thanks & Regards,
Stephen

Hi
First create a template in templates view of cProjects
this template is based on project type... Means you can have different templates for different project types..
Then select the project type for which you have created template, then only they will be visible in dropdown...
Niranjan
Award points if useful

Is it NOT possible to create indexes on views using SSMS?

I'm looking at:
http://www.mssqltips.com/sqlservertip/1610/sql-server-schema-binding-and-indexed-views/
The thing is I'm not able to find that index dialogue ANYWHERE. When I google I keep coming up with examples of how to create indexes using TSQL. Is there no way to create an index on an view with SSMS?
Using SQL Server 2008 R2.

Expand Views -> expand view -> right click Indexes - > new index

Problem with accessing parameter in HTML client, Access is not possible before created.

I have one Screen in which I set a date.
I pass the date to another Screen. In this screen I have a tile list showing all the busses and I want to show the current number of orders of the passed date for each bus.
So I created a custom field in the tile for showing the amount of orders, and it workes fine for a hardcoded date.
But I have no access to the passed parameter, because it is to early.
I get access after Screen.created to the Parameter, but there it is too late, because the list is already created with 0 as order Count.
myapp.freieBusse.bkz1_render = function (element, contentItem) {
var querybus = contentItem.value;
// var querydatum = new Date(); <=== This works fine for today
var querydatum = screen.queryDatumScreen; <== queryDatumScreen = Null at this Moment.
myapp.activeDataWorkspace.wksqlData.QueryDispoByDatAndBus(querybus,querydatum).execute().then(function (results) {
var countDispo = CountDispo(results);
element.innerHTML = countDispo;
function CountDispo(disposaetze) {
var totalDisp = 0;
var dispos = disposaetze.results;
dispos.forEach(function (dispo) {
totalDisp = totalDisp + 1;
return totalDisp;
How can I get an eralier Access to the Parameter. Or how can I manipulate the order Count of each row in the created of the Screen?
Helmut

The result is as slow that you can count the order with your fingers, but it works.
If you use a
WCF RIA Service the result will be fast. The calculations are performed inside SQL server and returned to the LightSwitch client in a single call per page.
You can also use a Web API call but for a table of data it actually takes a lot of careful JavaScript code and you lose the drag and drop and strong typing in the HTML designer.
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

HT2731 is not possible to create apple id in iphone without credit card ?

plz answer my question

You can, but it must be a new AppleID. Here is an article on how to do that:
http://support.apple.com/kb/ht2534

Just added Mavericks 10.9.1 and can no longer add an Excel file creating yesterday to an email message created on my MacBook Pro. I can locate the file in my Excel icon but not to attach to an email

Need help in attaching Excel files to emails......Excel spreadsheet created yesterday cannot be located to attach? The file can be located by entering the Excel icon but not visable when creating an email and attempting to attach.....seems to only inpact newly created files?

Support - Office.com - Microsoft

Microsoft excel not cannot be opened after i installed os x lion

my microsoft excel 2011 is not working with the os x lion. why is it so? whenever i try to to open it it will automatically close.. and a report will popo up and say microsoft excel cannot be opened because of a problem, should i reinstall my excel then?

When you uninstall it, make sure you uninstall everything. Follow these steps to, completely, remove office from your system: http://support.microsoft.com/kb/2398768. Then, try reinstalling.

Not able to download S&OP Add-In for Microsoft Excel

Hello Folks,
I have been trying to download the S&OP Add-In for Microsoft Excel but its not just getting downloaded. I am not able to see the S&OP in the excel ribbon. Any help would be appreciated. Let know if any info is needed from my end.
Thanks
Karan

Dear Karan
1) generally, under the following link you will always find the newest available add-on:
https://websmp106.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=Y&FUNCTIONBAR=N&EVENT=TREE&NE=NAVIGATE&ENR=67837800100900008464&V=MAINT
--> Comprised Software Component Versions --> SAP SOP EXCEL ADD-ON 3.0 --> # OS independent
2) As there are new Add-on's several times a year, you should efford to check with your administrators that you get the required authorizations, or that they provide always the latest version to you with other means, e.g. by putting the file in the company - internal "shopping-basket"
3) When installing was successfully, but you dont get it displayed, than go to Excel (I have Excel 10, so the path might be slightly different for you)
--> ribbon "file"
--> "Option"
==> you get a new window, here:
On the left choose "Add-Ins"
--> than on the right side bottom-left you will find "Manage"
--> choose "COM-Add-Ins" and press "Go..."
==> you get a new little window popped up. Here your "S&OP Add-In for Excel" should appear and flagged :
If that does not appear, you installatoin was not successful and you have to repeat
Good luck
Irmi

Microsoft Excel Physical Architecture not possible to create.

Similar Messages

Maybe you are looking for