"Microsoft.Exchange.2010.Reports.Transport.Platform.TopUsers "Report show no result

hello,
i have an issue in my SCOM 2012 report.when i go to
Reporting --> Exchange Server 2010 Report Library-->and open the report Microsoft.Exchange.2010.Reports.Transport.Platform.Top users.
in my scom 2012 console and execute the report for top users on the basis of Messages Send or Messages Received ,it return zero result.
thank you

Hi,
Blank reports can be a common issue with System Center Operations Manager. These are caused by many different reasons, and for the focus of this article we will discuss the following:
1. The wrong type of entity was selected as the report target.
2. The corresponding performance collection rule or the script that generates the performance data is not enabled for the report target.
3. There is a functional problem with the Health Service on the agent.
4. Management servers are unable to insert data into the OperationsManagerDW database.
5. Data is stuck in the staging tables in the OperationsManagerDW database.
More details:
https://support2.microsoft.com/kb/2573329?wa=wsignin1.0
In addition, it is suggested to configure the Exchange management pack according to the mangement pack guide.
And here are two links that should be helpful for you regarding to this issue, please refer to them:
http://zoomindia111.wordpress.com/configure-exchange-2010-sp1-management-pack-in-scom-2007-r2/
http://blogs.technet.com/b/emreguclu/archive/2011/09/26/empty-exchange-2010-server-statistics-mailflow-reports-if-default-log-directory-has-changed.aspx
Regards,
Yan Li
Regards, Yan Li

Similar Messages

BB Torch 9810 direct access mailbox Microsoft Exchange 2010

Hi,
Wanna check whether in anyway my BB could direct access mailbox Microsoft Exchange 2010 without BES (private and/or Company). Thanks
BR

Hi eddiesonka,
"Why" is truly a difficult question for us end users to truly know the answer to. Typically, I shy away from those since, well, not being an insider, I can only have my own personal theories. But, this topic is one that I'm OK presenting my theories on.
The basic answer is that different is different. Non-BB devices do things in their way, BBs do them in their way. Consequently, we all have choice, which is a good thing in a free market society, I think!
Unlike other devices (e.g., ActiveSync), BBs do not technically have a full on-device email client. Other devices, with a full on-device client, conduct all device to email server activities directly. BBs use the carrier/RIM hosted BIS service as an intermediary between the BB and the email server. The main benefit is one of data plan consumption. With non-BBs, the full on device email client must check the server for new email on a periodic basis (yes, I know that some services have more PUSH, but many are still PULL), generating traffic over the carrier data network even when there is no new email on the server. With BBs, that "check for new email" is done by BIS, completely independent of the BB...so no traffic to the BB is generated unless BIS finds something on the server that needs to come to the BB. For folks on limited data plans and limited WiFi access, this can become important.
So, it is up to the consumer to completely research the different choices available to them...and make their selection according to their own unique set of requirements and desires. RIM is advancing BIS...with GMail and Yahoo, there now are some calendar and contact OTA synchronization capabilities that did not exist in the past. With luck, they will continue to develop BIS and enable more and more OTA functions to BIS-level customers -- while, of course, at the same time, preserving their dominance in the mobile security world! And remember, for enterprises, RIM has made BES-X totally free...
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

OSX 10.5.8 and Microsoft Exchange 2010

Hello
Is it possible to get Entourage on Mac OSX 10.5.8 to work with A microsoft exchange 2010 server? I know it will work if we upgrade to Snow Leopard but some of our staff still have power pc macs and therefore can't use Snow Leopard.
Thanks
Gary

There is no reason why it should not work, it worked with exchange 2003 and 2007.

Configure sharepoint 2013 with Microsoft exchange 2010

Hi,
I am want to configure SharePoint 2013 with Microsoft exchange 2010.
Please let me how can I integrate these server to Send/ Receive domain E-mails.
Thanks,
C Mahone

For email integration there really isn't anything special about Exchange 2010 vs. any other mail server. Check the links here on configuring Incoming and Outgoing mail in SharePoint:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

My macbook air cannot sync with my office microsoft exchange 2010 mail server

My macbook air cannot sync with my office microsoft exchange 2010 mail server.
It used to work perfectly, and then I lost connection and was never able to establish one. I re-istalled my e-mail account several times, no success.

I am sure all of you got your email issues sorted out by now but i was having trouble settings up exchange email on my Iphone 5S, and the problem i found was to go to settings, icloud, then log into icloud with your apple id first (before setting up the exchange email). Once i logged into my icloud account on my Phone 5S, the exchange server email starting working and synching right away.
to confirm this worked, i even deleted my email account and deleted my Icloud accounts both from my iphone was able to simulated the same exact problem (exchange server would not sync with my Iphone 5S) until i logged back into my Icloud account on my 5S.
Again once i logged into Icloud, the exchange server issues went completely away.
Just wanted to post this so anyone else having the issue could see.

Exchange 2010 BCC Transport Rule skipped- Logging required

Hi,
we have some transport rules created on Exchange 2010 SP2 U4 that for each message sent to a specific mailbox the message is bcc'ed to some internal users. The rules work all fine, but we have a case were in some occasions a transport rule is not getting
applied and the message is not delivered to the bcc users but only to the initial recipient mailbox. The transport rule in question has Priority "0" and we have no conflicting trasnport rules
Message tracking log is not so helpful since it just shows that the message delivered successfully, whereas in the case that the rule is being applied message tracking shows the message being deferred to the other recipients as well.
Unfortunately we were not able to reproduce the issue since it occurs in an ad-hoc basis therefore enabling pipeline tracing will not be of much help.
Please advise, what logging shall we enable on what level to be able to identify the cause and the location of the logs generated in each case (Event Viewer or C:\Program Files\Microsoft\Exchange Server\V14\Logging or C:\Program Files\Microsoft\Exchange
Server\V14\TransportRoles\Logs).
Thank you very much in advance.

Hi,
If you want to ensure that the transport agent is doing its job within a message, we can enable
Pipeline tracing feature which allows us to create an exact snapshot of a whole message before and after it encounters each transport agent. Each step of the process is kept in a directory for troubleshooting reasons.
Before you enable pipeline tracing, you need to specify the sender's email address you want to monitor. Pipeline tracing is designed to log messages sent from a specific email address. Then we can use the following command to enable it:
Set-TransportServer Server1 -PipelineTracingEnabled $True -PipelineTracingSenderAddress "<>" -PipelineTracingPath <LocalFilePath>
For more information about pipeline tracing, please refer to:
http://technet.microsoft.com/en-us/library/bb125018(v=exchg.141).aspx
Understanding Transport Agents (Part 2)
http://www.msexchange.org/articles-tutorials/exchange-server-2007/planning-architecture/understanding-transport-agents-part2.html
Hope it helps.
Regards,
Winnie Liang
TechNet Community Support

Microsoft Exchange 2010 and Outlook 2013

My colleagues computer suddenly crashed yesterday and it wouldn't restart without a system restore.
Now when we try to open up Outlook it says that you must connect to Microsoft Exchange at least once before you can usse your Outlook Data file (.ost)
Also The PC has lost the trust relationship on the domain
We have exchange 2010 and the servers OS is Microsoft Windows Small Business Server 2011 and the Client PC is running off of Windows 8.
Can you please help me resolve this issue?
kind regards
Steve Bradshaw
[email protected]

It might be possible that the MAPI key (which enables Outlook to synchronize with Exchange) has been deleted due to the System crash. So, in order to establish the connection, you need to Reconnect the OST file to the original MAPI profile and then reconnect
then MAPI profile to Exchange Server.
If the above method fails to resolve the issue, then the best option for you would be to take the help of any professional OST to PST Conversion Software, which will help you to Extract data from your OST file and convert it to PST file which you can import
back to your Outlook to establish the connection with Exchange Server again.
You can check this
presentation for more info.

Exchange 2010 Hub Transport

Hi Spiceheads, I thought that with Exchange 2010 mailboxes will always use the local hub transport on that server first but alas I was wrong. We need to migrate an exchange 2010 box to virtual hardware, I setup and configured a new server with the old one still live, as soon as I installed the HT role on the new server mail immediately started flowing out of it first even though every mailbox and DB was still on the old server, of course this ended up causing our mail to get flagged as spam as the spf records didn't match, thankfully this lasted all of 3 minutes while I uninstalled the role from the new server, My question is - is there a way to add the HT role but still have mail flow out of the old HT server vs the new one?
I want to add the role so I can configure all the options first, including some third party software we have...

Hi allAfter a rather heated conversation with our MSP I come to you for guidance.We've recently acquired another business and need to add two new sites plus a butt hosted server to our network. The current layout is as follows (forgive my terrible diagram):Top is our business, bottom is the one we've purchase, red indicates how the VPNs are structured. We have extensive on-premise infrastructure at the Main Office (top left) so we are planning to retire my butt hosting once our systems have been merged but in the meantime we need to be able to access their system and vice versa so I am hoping for the following:In summaryNew link from my butt hosting to the Main OfficeNew link from the alt-main office to Main officeNew link from the new "other site" to Main OfficeNow, our VPNs are controlled by our MSP, after a two week delay waiting...

Exchange 2010 Edge Transport - Not being detected by SCOM agent?

All,
I recently installed the SCOM 2007 R2 agent onto our Edge Transport server for Exchange 2010. Our architecture is pretty simple. We have a DMZ network where I have a SCOM 2007 R2 Gateway server and our Edge Transport server.
Essentially it goes like this:
Edge Transport Server Agent <-> Gateway Server <-> SCOM RMS server
I have the Exchange 2010 and the FOPE for Exchange 2010 MP's loaded on our RMS server. When I loaded the SCOM 2007 R2 agent onto our Edge server, the agent discovered it had FOPE and does reflect as such on the RMS server, but it did not seem to pick
up that it was also the Exchange Edge Transport role.
I looked on the RMS server in the Authoring -> Object Discoveries and the Edge transport is set to discover, so I am a little stumped as to why the agent didn't discover the role.
Any suggestions where to look next?

Just a little more detail on this. I've been working on this exact issue for probably 3 weeks with an engineer.
This issue is actually a bug in the Exchange 2010 MP.
How is it a bug exactly? Well, the MP is looking for the Active Directory site that the Edge Server is a member of... let's think about this, the Edge server is NOT domain joined, and as such, shouldn't have an active directory site.
Additionally, the regkey path referenced above is incorrect, though it seems that numerous others have figured that out on their own as well. The correct regkey path should be:
hklm>system>currentcontrolset >services>netlogon>parameters
So sure, this "fixes" the issue - but the real issue is that the MP is looking for an Active Directory site, on servers that aren't a member of an active directory site. Kind of a BIG oversight by the MP authors in my opinion.
I'm sure there are plenty of orgs relying on SCOM to monitor their Exchange 2010 implementations that don't even realize that their Edge servers aren't being monitored for the Exchange roles.

Exchange 2010 hub-transport server

i have 2 exchange 2010 hubtransport servers.
ideally when i send email my email should be load-balanced but emails send using hubcas1 goes fine and hubcas2 kepts in queues
suppose if i send at a time 5 mail
3 emails go through hubcas1
2 emails stucks in queue in hubcas2

Hi,
As you said you have added both the hub transport servers in the source server option of the send connector.Same time you have mentioned you don't have the smart host to deliver the emails to the internet and also the server hubcas2 can able to resolve the
external domain namespaces .Then do the following .
step 1 :Then please enable the protocol logging on the send connector to see the why the connections from the server hubcas2 is rejected to send emails to internet.
Step 2: Then do the outbound email test from EXRCA tool by using the ip address or name which is mapped on the MX record which belongs to the server hubcas2.
Please feel free to reply me if you have any queries .
Regards
S.Nithyanandham
Thanks & Regards S.Nithyanandham

Microsoft Exchange 2010 / Office Pro 2013 - Contact Issues

Good Morning Everyone.
We are running MS Exchange 2010 and have recently upgraded all our clients to MS Office 2013 Pro from Office 2007.
We've had problems with people being able to access previously accessible share folders etc. but we've managed to resolve them. What we are having problems with are peoples personal contacts....
Within Outlook If we click "New Email", then we click "To", choose address book and select "Contacts" (Personal contacts) we receive the error:
"The Address list cannot be displayed. The contacts folder associated with this address list could not be opened; it may have been moved or deleted, or you do not have permissions. For information on how to remove this folder from
the outlook address book, see Microsoft Outlook Help"
The unusual thing is, if we go to the people tabs at the bottom (Mail, Calender, People etc") Then we can access the address book without issue?
Any help would be appreciated, this problem is on every single client...
Regards
Steve Skingle

Hi,
Please make sure the Contact folder is enabled as an email address book in Outlook. We can check this by right-clicking on the personal contact folder, select
Properties, then Outlook Address Book tab.
Check if the “Show this folder as an email Address Book” option is ticked. If not, tick it and restart Outlook to check the result.
Please let me know the result.
Steve Fan
TechNet Community Support

Exchange 2010 edge transport server, degraded desktop / remote desktop

I have a 2010 edge transport server loaded on windows server 2008 R2 that after about 3 days will no longer allow RDP connections or desktop logons due to a serious performance lag / time out. A reboot clears the performance issue for about another 3 days.
I allowed an RDP connection to stay open for the 3 days and it continues to work however actions like trying to load the task manager, start button, computer or any windows not currently open takes an extremely long time. Task manager and perf mon show very
little processor and memory usage.
Tried the following to resolve:
Replaced hard drives (raid 1)
Replaced server (moved drives from one server to another chassis)
Monitoring iops, memory usage and proc transactions. Nothing shows any unusually high usage.
I tried disabled AV services, log monitoring and backup services both while the issue was happening and as preventative measure before the issue arose.

hi cna you check if by any chance you have bandwidth limitations configured. either on router or on tour switch. i had this kind of issue and it ended with bandwidth issue which was configured wrongly. you said this is happening with RDP. hows the performance
when accesing locally
did you check performance counters and event viewer.. anything there
Mark as useful or answered if my replies helped you solving your query.
Thanks, Happiness Always
Jatin
Skype: jatider2jatin, Email: [email protected]

Contact Corruption with Microsoft Exchange 2010

I currently have a client with a Sprint palm pre who has roughly 1500 contacts. I have set up his phone to sync directly with the exchange server over the air (This is the only account that is set up on the device) E-mail works fine, calendar and contacts appear to work fine, however it seems at random that the pre deletes certain pieces of information out of contacts (phone numbers being deleted, e-mail addresses having random erratic characters inserted, sometimes my client will enter a new contact and it will not sync at all, it doesn’t even show up on the device) He currently uses 3 separate PC’s 2 with outlook 2003, one with outlook 2007. There have not been any contact issues similar to this before the palm pre was synchronized with their new exchange server. The device has been hard wiped and re-synced (an arduously long process, the problem is still persisting. I have also checked for any software / firmware updates, everything looks to be the latest version available.
Post relates to: Pre p100eww (Sprint)

Important detail I missed. The client is running MS Exchange 2010. Is there a compatability list somewhere on palm's site?

Exchange 2010 SP3 CU7 Index / Search not Indexing / no result

I Have Problemes with an Exchange 2010 Sp3 Ru7 Server. The SearchEngine does not index anything. No Database have index Data. When i went to OWA no Searchresult on Server.
I have start the resetsearchindex etc. The Microsoft-Exchange-Troubleshooters/Operational gives no error, Mailbox Repair also no error. When i start resetsearchindex the Folder in the Database Directory ist going delete an renew. Then he create 19Files but
nothing more happend.
i configure Perfmon to see activity. There i see that under MSFTESQL-ExchangeCatalog the Counter ""Batches completed w/errors 1800"
After few hours an error in Eventlog came.
Die Exchange-Suchindizierung hat die Indizierung der Postfachdatenbank Mailbox_Database_01 (GUID = b69e081c-65d8-49a9-8a82-0cdc16333380) aufgrund eines Fehlers (Microsoft.Exchange.Msfte.BatchTimeoutException: Timeout detected for batch Database Guid:b69e081c-65d8-49a9-8a82-0cdc16333380;
NumberOfFailedDocuments:0; ShouldIsolateError: False; SubmitTickCount:38475899; BatchKind:RetryMailbox; Number of entries:100) vorübergehend deaktiviert.
Anyone an Idea ?
Thanks for Help- Thomas

Hi,
Here are some suggestions, please try these to check result.
Please check to see if you are using a 3rd party disk defragmenter. If you are using this type of software, stop all the 3rd party defragmentation services temporarily.
Please check to see if the CatalogData folder is being scanned by file-level antivirus OR on-demand antivirus. If it is, reconfigure both file-level and on-demand antivirus, so it is not scanning the CatalogData folder.
Please turn up logging to expert for MSExchange Search Indexer\Configuration and MSExchange Search Indexer\General.
Please rebuild search catalog and check if event 110 is logged in the application log. Event 110 means the full crawl is completed successfully.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Exchange 2010 - Issues with Room Finder not showing available rooms.

Hi,
We are having issues with room finder not populating the room resources that are available inside a meeting request within outlook 2010. It also appears that there is a drop down box that is present in a lot of the other forums and pages that I have referenced
for troubleshooting:
Single Exchange 2010 server version 14.03.0224.002 running all roles. Migrated from previous Exchange 2003 environment and old 2003 server has been decommissioned.
Room mailbox created and all configured resource policies are working correctly for creating meeting requests. A distribution group was created and the room mailboxes added to this DG as per instructions here: hxxp://exchangeserverpro.com/find-meeting-rooms/
. We have recreated the OAB and confirmed that the Room mailboxes are part of this list.
Does anyone have any ideas why the rooms are not showing up in the Room Finder box?
If I have missed any information please feel free to ask for more info.
Thanks, all help will be appreciated.

Hi,
According to your description, I understand that room finder cannot show available room in Outlook 2010.
If I misunderstand you concern, please do not hesitate to let me know.
I want to double confirm whether it works before, or it can’t work after decommission Exchange 2003? How about other Outlook version?
The offline address book (OAB) is generated by Microsoft Exchange Server. In order for the Room Finder feature to work, the OAB must be generated by Exchange 2010 or a later version.
Please run Get-OfflineAddressBook | FL Identity,Server to double check OAB generation server. Also, run Get-OabVirtualDirectory | FL to check URL for current OAB VD and force update OAB.
Then open Test E-mail AutoConfiguration to double check whether Outlook get correct URL.
After above complete, please try to switch to Send/Receive tab, click Send/Receive Groups, and then click Download Address Book.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

"Microsoft.Exchange.2010.Reports.Transport.Platform.TopUsers "Report show no result

Similar Messages

Maybe you are looking for