Microsoft Exchange and Outlook "requesting data.. error message.
I have a customer experiencing problems with their Microsoft Exchange and Outlook clients running across a newly installed ATM WAN. I have a 3 MB IMA circuit at the host as well as the remote. On a frequest basis the clients will get the requesting data from Exchange server error message. Any suggestions on what might be causing this problem?
Exchange server was original designed as a LAN application, thus the RPC protocol. Since you are running across a slow WAN (latency is not LAN like) you can only adjust/eliminate the message via the Registry, or better yet a Group Policy;
http://support.microsoft.com/default.aspx?scid=kb;en-us;293650
The messages become more prevalent with large number of users, slow hardware, and with Outlook 2003. The move to RPC over HTTP (2003 Exchange and Outlook 2003) might reduce chatter.
Similar Messages
-
ITunes 9.0.1 windows 7 and outlook - default client error message in sync
So I've just installed a new copy of the RTM release of Windows 7 (clean install on new PC). I've installed my outlook 2002 and iTunes as well and replicated my settings identically to my old system running on XP.
The problem I'm getting is that everytime I try to synch my iPhone to iTunes, I get the following error message:
Either there is no default mail client or the current mail client cannot fulfill the messaging requests. Please run Microsoft Outlook and set it as the default mail client.
Now....I do not use outlook for mail and most IMPORTANTLY, in the iTunes sync Info window for my iPhone, Mail Accounts is unticked so that it should not sync.
Normally, I'd call this a microsoft issue, but I think this is a problem with iTunes and Windows 7 possibly. It looks like iTunes is trying to do something with the mail client even thought I have it configured to ignore mail account synching.
Anyone have this problem and a solution?
I tried doing a detect and repair in microsoft outlook, but the problem is still present.Ya I had the same problem. Just uncheck all of the outlook boxes and then re-sync. Then recheck them all and re-sync, after that my itunes got hung up on calenders so to fix that just go into preferences, devices and then click reset sync history and you should be all set.
Message was edited by: DFreeman -
I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?
I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you. -
We are getting a SCOM alert " Database copy isn''''t keeping up with the changes on the active database copy and has failed."
When we go to the mailbox server and check we found all the Mailbox DB's are mounted properly and their copies are in healthy state. Further digging to this problem we found that there are no critical events to this DB in the eventviewer.
When we runt he get-mailboxdatabasecopystatus -identity DBNAME | Fl then in the ErrorMessage section we get error "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for . If the copy doesn't
recover automatically, administrator intervention may be necessary. Error: The directory is not empty."
ErrorEventID : 4126
In the event viewer we get a Information event 4114 saying the DB redundancy health check passed and in the details section we get the same error message mentioned above.
Also we observed that the "MSExchange Replication" counter "Failed" is set to 1 for this perticular DB but is is set to 0 for the other DB's. Tried restarting the MSEXChange replication service but still the "Failed" counter
is 1 and the SCOM alert is still active.
The version is Exchange 2010 SP3 UR5
Any clues???Hi,
From your description, this issue only affect one mailbox datatabase.
Please use the Update-MailboxDatabaseCopy command to check result.
If it doesn't work, please dismount your active database copy and check if this is Clean Shutdown, if it's dirty shutdown, please bring to clean shutdown and mount this database copy. Then run the Update-MailboxDatabaseCopy command again to check result.
Best regards,
Belinda Ma
TechNet Community Support -
I just downloaded Itunes 11.1.4 (64-bit) update and am running Windows 7. Itunes will not run after installing this update and I receive an error message R6034 on Loading Microsoft C Runtime Library incorrectly. Also Error message 1114 the Itunes Installer was installed incorrectly. Is there an new update for this problem? Is anyone else having this problem? Please help. Thanks.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99425) -
I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010. It worked fine before with iCloud 2.1.2. Any solutions? I'm on Windows 7, Outlook 2010.
HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS
-
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
new Ipad and cannot sync contacts; error message on Itunes - unable to load data class info from sync servies; reconnect or try again later
For Windows - look at this.
http://support.apple.com/kb/TS1567?viewlocale=en_US
For Mac - maybe this applies
http://support.apple.com/kb/TS3744
I just picked these out by going to the box to the right called - More like This. -
I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station". Any ideas?
This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express. -
Send/receive hang on "Offline address book Connecting to Microsoft Exchange" and will never finish?
When I hit send/receive on a few clients the process will hang on "Offline address book Connecting to Microsoft Exchange" and will never finish? These same user can long on the OWA and send/receive just fine. The problem is that while it's hanging it can't go out and look for new email. Any thoughts?
I had similar problem.
This actually arose due to the fact I had mistakenly set the Default web Site directory with a HTTP redirect which applied to all subfolders including OAB.
I did then rectify this by going into individual subfolders and unchecking Http Redirect from each sub folder, however unknowingly it created/modified a webconfig file under the OAB virtual directory. (you can explore it to see the
file there)
If you test your OAB url (for people with the issue), which is : http(s)://servername/oab/[code]/oab.xml you will get Error 500.
Each time Outlook 2007 was trying to connect to get OAB, it was trying to read that webconfig file.
I fixed this by changing the permissions on that webconfig file to allow everyone and the above error was done, and also my Outlook 2007 was downloading the OAB again!
Now if the above fix did not fix your problem, you can temporarily effectively disable OAB by unticking Web Distribution of OAB and Public Folder Distribution in EMC under Organisation/Mailbox/Offline Address Book. Users will be able to do a
send/reiceve without any errors/issues. However, if a new contact/user is added to your AD with exchange attributes, the clients will not be able to see this. I'm guessing if cached mode was also not used, issues would also occur if they tried using the GAL.
acidack, you are a lifesaver.
I looked at the other webconfig files in the internet directories and noticed they all had 'Authenticated Users' with read permissions while the OAB one did not. Adding this group with read permissions solved the problem; Outlook 2007
users are no longer frozen on the 'Offline address book connecting to Microsoft Exchange" message.
What caused this? I'm not sure. I was messing with the web settings trying to redirect people to OWA. Something I did must have caused this file to be re-created without the needed permissions.
Acidack and AndrewB, You are both live savers. After all these years, your solution to this problem is still spot on. -
I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!
amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive -
Trying to install itunes on windows vista and get the following error message:
Trying to install itunes on windows vista and get the following error message: An error occurred during the installation of assembly "Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey Token="1fc8b3b9a1e3b",process orArchitecture="x86"". Please refer to Help and Support for more information. HRESULT: 0x80070424.
A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
Hi,
I have some data loaded into the data-domain in Endeca 3.0. When I was creating views in studio I repeatedly get this message when I say save view:
Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported language ${DEFAULT_LANGUAGE}
In the workspace.prm file I have set ${DEFAULT_LANGUAGE}=en
May I know why this happening and a remedy for it. Appreciate you help.Hi,
I have some data loaded into the data-domain in Endeca 3.0. When I was creating views in studio I repeatedly get this message when I say save view:
Could not execute view config service request. This usually happens when an invalid view config service request is made, or when a read only Oracle Endeca Server receives a view config service request. Error message: Error applying updates: Unsupported language ${DEFAULT_LANGUAGE}
In the workspace.prm file I have set ${DEFAULT_LANGUAGE}=en
May I know why this happening and a remedy for it. Appreciate you help. -
I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, MarkUnfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems. -
My ipod needs to be restore and I get a error message saying :ipod software update server coud not be contacted.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then tap Settings > General > Software Update
No data is lost due to a reset.
Maybe you are looking for
-
How to restore R11 database..? Please guide in details.
Dear Friends, I had install Windows NT 4.0 as domain controller and installed oracle R11 and configured. It was working fine. After some time I had UPGRADE my Operating system WINNT 4.0 to WINDOWS Server 2000. Server was properly upgraded with any tr
-
Relink issue In the new InDesign CS4 when relinking an image via the links pallet the relinked file is "automatically reduced" to fit the current picture box. How can I turn this function off?
-
Songs slowing down when I type
I'm running iTunes 7.7.1 on a new computer. iTunes had no problem on my old one, but on my new one, the songs slow down when I type, which is rather annoying, since I listen to music while, you know, typing. I'm on WinXP Pro, and everthing else is wo
-
Help, error when trying to load sound file
When i try to load a sound file like this AudioClip gong = getAudioClip(getDocumentBase(), "slow.wav");I get this error, java.lang.NullPointerException at java.applet.Applet.getDocumentBase(Applet.java:141) at collision.<init>(collision.java:
-
I am unable to register my debit card after creating my apple ID. Whenever i click "continue" after filling all the debit card details, it shows that, "Your payement method has been declined". Please help me people, why is it so.? Also, i would ike t