Microsoft exchange just stopped working.

Microsoft exchange just stopped working, getting error message "cannot get mail, the connection to the server failed" no settings have been changed on my iPad.

Handed it over to my LAN administrator and they managed to sort it out. Basically deleted everything and switched it off then re loaded mail account. Now it works.

Similar Messages

Exchange just stops working.......

I have my 3G set up on my corp network. Everything sets up fine and push works perfeclty. then, for no apparent reason, it just stops working. I manually try to sync and I get the "connecting" for about two minutes then it just stops and no emails come through nor can I send anything. the only fix seems to be deleting my account, waiting about 30 minutes and then re-configuring. This again works for a while until the same thing happens.
Has anybody else run into this issue?

Here is the ultra-lame Apple fix for this:
http://support.apple.com/kb/TS2032

Microsoft Exchange email stopped working "Cannot Get Mail" message

About 4 days ago my work email stopped working altogether. Every time i open the application, a message 'Cannot Get Mail - The connection to the server failed.' appears. This happened about a day after i installed 2.2 firmware.
I spoke with my IT department and they haven't made any changes on the server.
I deleted all mail accounts on my phone but to no avail. I did a complete restore of the phone and it still doesn't work.
I had my phone replaced yesterday for a different issue, it came with 2.1 software and i still was not able to connect to the server.
One more thing, when i initially set up the account, i get an error message 'Unable to Verify Certificate'.
The email was working fine for about three months before that.
Any help would be very much appreciated since it's my work phone and i rely on having access to my email everywhere i go.
Thanks,
Message was edited by: imbGraff

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
https://discussions.apple.com/message/20180176#20180176

My Microsoft Silverlight just stopped working. It says that I need to reinstall so I deleted all of the files and then tried to reinstall. Now it says that a newer version of silverlight exists already but there are no versions of silverlight in the drive

What should I do?

Those instructions are somewhat out of date. There is no WPFe.plugin. Even these instructions are out of date.
There seems to be two of these "how do I remove and update silverlight" threads going on at the same time. Here's a link to the other one.
I was recommending the same thing over there as here with the same lack of results. So I'll repeat here my last post in that thread not knowing at the time I am writing this whether that suggestion will work:
I only have one idea left. After that you need to do some google searching on "uninstalling os x silverlight". Apparently this has caused problems for a number of folks.
Remove the following two installer receipts:
/private/var/db/receipts/com.microsoft.installSilverlightPlugin.bom
/private/var/db/receipts/com.microsoft.installSilverlightPlugin.plist
/private/var may be invisible on your system so use the Finder's Go To Folder and type (or copy/paste) /private/var/db/receipts/ and click the Go button.

Anyone having issues syncing iPhone with Microsoft Outlook 2007? iTunes says it is syncing but it will not update calendar or contacts. It just stopped working a few weeks ago.

Anyone having issues syncing iPhone 3GS with Microsoft Outlook 2007? iTunes says it is syncing but it will not update calendar or contacts. It just stopped working a few weeks ago.

I'm glad to hear that I'm not the only person struggling with exact issue. I've rebooted, upgraded, re-installed, pulled all my hair out as nothing works.
The biggest dissapointment with this thread is that nobody seems to have responded with a solution.
And yes I've managed to pull together enough intellegence to tick the box "sync to outlook" in iTunes - still nothing man.
Definately does not sync from phone to PC and is very hit and miss on PC to Phone. In other words now running 2 seperate calendars - Not helpful Jan.

Microsoft Exchange Health Manager worker process (15200) received restart request and will be stopped. Server 2013

Hi everyone,
Anyone seen this before? The Health Manager seems te stop and restart rapidly.
Microsoft Exchange Health Manager worker process (15200) received restart request and will be stopped. Restart reason: Unknown.
Error message:
System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
at System.Diagnostics.Eventing.Reader.EventLogException.Throw(Int32 errorCode)
at System.Diagnostics.Eventing.Reader.NativeWrapper.EvtSubscribe(EventLogHandle session, SafeWaitHandle signalEvent, String path, String query, EventLogHandle bookmark, IntPtr context, IntPtr callback, Int32 flags)
at System.Diagnostics.Eventing.Reader.EventLogWatcher.StartSubscribing()
at Microsoft.Office.Datacenter.ActiveMonitoring.LocalDataAccess.InitializeProbeResultNotification(DateTime startTime)
at Microsoft.Office.Datacenter.ActiveMonitoring.LocalDataAccess.Initialize(IEnumerable`1 discoveryWorkItems)
at Microsoft.Exchange.ActiveMonitoring.MonitoringWorker.Activate()
at Microsoft.Exchange.ActiveMonitoring.MonitoringWorker.Run(String[] args)
Watson report about to be sent for process id: 11156, with parameters: E12IIS, c-RTL-AMD64, 15.00.0847.032, msexchangerepl, M.O.Datacenter.ActiveMonitoringLocal, M.O.D.A.CrimsonReader`1.ReadNext, System.UnauthorizedAccessException, e552, 15.00.0847.030.
ErrorReportingEnabled: True
Cheers,
Yannick

Hi,
The Exchange Health Manager Service is used to manage worker process. It's used to build, execute, and start and stop the worker process, as needed. It's also used to recover the worker process in case that process fails, to prevent the worker process from
being a single point of failure.
Please check whether the Exchange Health Manager Service is running well.
Besides, please check the application log to see if there is any related events that can be used to troubleshoot this issue.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

My charger just stopped working even though the light turns on

My charger just stopped working and I got my laptop less then two weeks ago, the green light turns on then turns orange and shows it is charging but the battery doesn't increase it decreases as if I never had the charger connected, what can I do? I have no insurance for my laptop.

As Csound1 sugessted bring it back and exchange it before the 14 day window expires. Take advantage of it.
You also have a 1 year warranty

Exchange connector stops working after patching?

our service manager exchange connector stopped working after patching that we performed on wed.
When starting or stopping the exchange connector we get this info in the Operations manager log file.
Error importing solutions. Error message:Management Pack [Microsoft.EnterpriseManagement.ServiceManager.Connector.AD,d43c3091-62c2-6404-607d-4376e592a89b] already imported.
Management Pack [Microsoft.EnterpriseManagement.ServiceManager.Connector.Sms,f772aa89-b934-2fac-4f37-5e0165d390ec] already imported.
Management Pack [Microsoft.SystemCenter.ConfigurationManager.Connector.PowerManagement,a070249c-6b56-37b8-d52c-a2906a63f9fc] already imported.
Management Pack [Microsoft.EnterpriseManagement.ServiceManager.Connector.Sms2011,fbea6f5a-838d-25a2-20af-fc21eb0b6706] already imported.
Management Pack [Microsoft.SystemCenter.ConfigurationManager2011.Connector.PowerManagement,bc23ed54-a33a-f608-05a9-c1f292140d2e] already imported.
Has anybody else seen this? Any suggestions?
Thanks Lance

Hi,
Did you try to restart SCSM's services?
If this doesn't help, I would try to delete and recreate the connectors.
More info:
System Center Service Manager Connector 3.0 for Exchange
http://www.microsoft.com/en-us/download/details.aspx?id=38791
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

CUCI LYNC application has just stopped working

Hi guys, anyone come up with this issues with CUCI LYNC, the application has just stopped working, the error in the application log is "could not connect to device provider". It was all working fine and just stopped working, and unaware of any changes to the system which is 6.142190-3. Cisco UC Integration for Microsoft LYNC version 8.6(2.20916) & Microsoft OC 2007 r2
Thanks in advance
Jeff
Sent from Cisco Technical Support iPad App

Just in case anyone else has this problem, the Tomcat certificate on the cluster had expired. Until you can schedule a change to resolve it, you can put the following in the regkey "ccmcipservervalidation" =0 and restart, it should then log in if it were the same issue.
Sent from Cisco Technical Support iPad App

Photoshop Elements 5 just stopped working and will not open my catalogue.

I have Photoshop Elements 5 running on Vista 64 bit. It was working fine, but just stopped working out of the clear blue outside of regular Microsoft patches.
The intro screen opens but when I click on Organize my photos it starts to open the next window but just sits there trying to open my catalogue file of pictures. I've left it there trying to fully open for hours and nothing progresses beyond that point. Any suggestions?

Please re-post your question in the correct forum.
Mylenium

Ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost.

Microsoft Excel has stopped working

We are on BW 7.0 and BEx7.0
I have activated BI Content of InfoCube 0WBS_C11 and all it's SAP delivered Query elements. The InfoCube is loaded with data already.
When I run the queries in BEx, I got message "Microsoft Excel has stopped working" on the queries which have only one parameter of "My Controlling Area", If the queries have other parameters like BWS besides Controlling Area, I got"No Applicable Data Found" .
Please help, thanks.

We are on ERP Release 604 level 0004 SP SAPKH60404.
Office 2007 or lower is the standard for our users. When Report Painter and Infoset query reports are displayed in Excel view using Office 2010 Excel and the file tab is selected (to save the file), a box with the message 'Microsoft Excel has stopped working' appears.
We just discovered this issue and are looking for an answer. The work around for now is to export a spreadsheet file.

Exchange email stopped working on iphone 4s and iPad3

Exchange email just stopped working on both iPad3 and iPhone 4s for no apparent reason. My PC is windows7 and using office 365 and receiving email OK. Suddenly both my Apple devices are saying "user name or password for Exchange is incorrect". Any ideas?? I am still on iOS5.1.1 and not 6. Appreciate your help in advance.

mdwnz -
It sounds like you have either a locked out account or your password expired. Please reset your password then go into Settings > Mail, Contacts, Calendar > Click on the account with the issue and re-enter your new password.
This should resolve your issues.

Hi, I've tried charging continuously for 72 hours. But to no avail. It just stopped working out of the blue! I had only used it for about 1 month!

Hi, I've tried charging continuously for 72 hours. But to no avail. It just stopped working out of the blue. Actually I believe I let the battery die off completely. When I tried charging it again, it never worked.
I had only used it for about 1 month.
I bought this in January at Best Buy, and still have the receipt. I was on long business trip and just got back. I can't get the 90 day customer service. How can I get this returned to Black Berry, they won't allow me to contact them without providing my credit card for incidence based service.
Please help! Thanks.

do any LED color happen when you plug it in?
if only RED, then pug in until red goes out, wait 6 seconds and plug in again.
repeat 3 times and wait to see if 5 green flashes while plugged in
after 5 flahes, leave it plugged in for 90 minutes and it should boot up. if not hold power button down for 20 seconds and try again.
You have 1 year warranty, choose option other when calling in and not phone support. This is confusing I know.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Microsoft excel has stopped working (on model update...).

Hi eb
I have chaneged the query of an excel 2013 power pivot model's data source.
On save an update of the models data is launched.
Every thing goes well until the very end of data retrieval (around 27 milion records).
At that point excel crashes with the enoying massage 'Microsoft excel has stopped working'.
I have looked in windows logs there is just one general massage with nothing in it...
Where would you go looking?
File size at 4.5 milion records is 111MB so at 27 milion should be around 666MB...
TIA!
Rea

What version of Excel 2013 do you have installed? 32 bit or 64 bit? It sounds like 32 bit based on your above scenario. When you have excel open, open up task manager and watch your memory usage. 32 bit Excel is capped at 2 GB of RAM, but realistically it
starts crashing right around the 650 MB to 1.2 GB range. (I've seen it crash anywhere in this range)
I'd suggest either limiting your query down to pull much fewer rows or installing the 64 bit version of Office/Excel.
In addition to what SQLBISchmidt has already mentioned, double check that you are only including columns that will actually be used within the Power Pivot model. Be especially careful with columns that have many distinct values (i.e. high cardinality) as
these can be very costly in terms of memory consumption.
Do you happen to have any complex calculated column calculations in the table or related tables? This can also cause these kind of issues if it is indeed memory-pressure related.
You may find this official help article useful in finding a way to reduce the memory footprint of this table: http://office.microsoft.com/en-gb/excel-help/create-a-memory-efficient-data-model-using-excel-2013-and-the-power-pivot-add-in-HA103981538.aspx
Regards,
Michael
Please remember to mark a post that answers your question as an answer...If a post doesn't answer your question but you've found it helpful, please remember to vote it as helpful :)
Website: nimblelearn.com, Blog:
nimblelearn.com/blog, Twitter:
@nimblelearn

Microsoft exchange just stopped working.

Similar Messages

Maybe you are looking for