Microsoft Exchange Portlet security

Hi, I cant find any documentation on this issue, but are there other ways to set up login security for the Exchange portlet than the ones described in http://www.oracle.com/technology/products/ias/portal/point/exchange2003/installation.html ? Basic authentication is not an option for the case I'm on right now, so a different authentication scheme is needed.
Is it possible or do I have to resort to some activex-control or something?

Hi gekka,
Can you tell me which kind of authentication you are looking for Microsft Exchange Portlet?.So that i can give some solution for your problem.Please provide environment detail such as which version of exchange(2000/2003) you are using???..e.t.c
Thanks & Regards.,
Bala S Murugan.,
SendRequestGetResponse At Gmail Dot Com.,
http://balamurugan-portlets.blogspot.com

Similar Messages

Microsoft Exchange enhanced security MSFP or AKU 2...

Does anyone know if the Mail for Exchange client supports the MSFP security standards that have been implemented as part of MS Excahnge 2003? my company is about to ban all devices that do not support this standard and I am mightily concerned about losing the facilities on my e70. If the product does not support the standards, can you tell me when Nokia will implement the standard - all major enterprises are setting this as a minimum requirement and I am sure it will severly dent sales of Smartphones if they do not support the standards

Hi,
Would you please provide more detailed information about the issue? What operation did you act when the issue occurred?
In additional, please refer to the article below to see if it can resolve the issue:
Event ID 904 occurs when you back up an Exchange database by using either a third-party backup solution, or a NT Backup application
http://support.microsoft.com/kb/924204
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

EXCHANGE PORTLET IN CLUSTER MACHINE

Hi,
I was setting the exchange portlet, but the machine residing IIS and the outlook is in a cluster how can I configure the portlet in the cluster?, is there any special instruction to setting the portlet?, I have to do the same twice in each machine or this is not supported?
Thanks a lot.
Cecilia Vega

Hi Cecilia,
I have not tested Microsoft exchange portlets in a cluster environment. But I feel these portlets should work fine in a cluster environment too.
A few questions though,
1. "Outlook is in a cluster", can you please elaborate on this. As the there is no dependency on Outlook for the portlets to work.
2. Can you let me know details of Cluster environment and the version of the Windows/ IIS and Exchange server that you are using.
Answer to the above questions will allow me to answer with more specifics.
But here are a few points for setting up Microsoft portlets in a cluster environment:-
1. Once you set up the Replication and Clustering in IIS, then you will be pointing to one IIS machine where the .asps are hosted. And the failover will be taken care by the clustering environment, you will not have to do any additional settings.
2. You need to keep in mind that ASP sessions do not fail over to other nodes in Microsoft Clustering. This means that clients will need to reestablish the connection if a failover occurs on the server.
Please get back if you face any issues.
Take care,
Manoj

"Security policy error" while setting up "Microsoft Exchange Hosted Services" Exchange Account (corporate user)

I'm a corporate user with a very large company that is using Microsoft Hosted Exchange services actually hosted by Microsoft employees at their facilities. I called Palm support and they were clueless and zero help. The lady pointed me to some Palm KB article that I had already read and only remotely had anything to do with my problem. I see nothing on this error message in the forums and google searches. Sprint has even replaced my palm pre due to other reasons and the same error occurs after I configure the exchange account. I'm also seeing the error when I configure my account on my wifes brand new pixi. Both our pre and pixi already have exchange accounts successfully configured on our phones that are hosted by sherweb. The sherweb exchange accounts work without issue. I have tried configuring this microsoft hosted exchange account 5-6 times with the same result. It accepts my configuration information and adds it to the list of available email accounts in the pre. However, it keeps popping up this message stating "Security policy error: "Exchange... Tap for details" (with a yellow exclamation mark). Then it says "Security Policy Error" The account Exchange (first part of my email address) is disabled because security policies cannot be set." "Leave it disabled" or "Remove Account". I know something is working because it enforced a Password or Pin policy on to my phone which is not required unless this account has been added. I can also see it in the "Mobile Devices" section of web outlook when I login. This is the place in web outlook where you can see the last time the device synced, where you can remote wipe the phone etc. If anyone has any idea how to resolve my issue please post. Any ideas? I'm fresh out of ideas on this problem and very frustrated with Palm Developers. Just another example of poor development and testing practices by Palm. I hope they correct this issue on subsequent releases but I am only marginally optimistic that they will ever get this exchange mail support to the level necessary to support large corporations. What I do know is that my Microsoft Hosted Exchange account works fine on a Windows Mobile phone and a iPhone 3GS (confirmed by other coworks who have configured their phones using our exchange services). As a result, I have no choice but to blame Palm for this problem instead of Microsoft. Palm please fully support microsoft exchange mail users!!!!
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

From my understanding of EAS and PDA devices, if the server as a policy to enforce and the device cannot provide that policy then the server will not allow the device to connect. The KB I gave you has a listing of what policies the devices supports, if your server supports more than that then it could deny the connection. As for what the iPhone does and does not do we cannot answer that due to we are not iPhone.
I did find an article that may explain a little better for PDA and exchange: http://www.infoworld.com/d/mobilize/how-avoid-smartphone-exchange-policy-lie-004

Spam Protection for Email showing Critical for Exchange Server 2007 after installing Symantec Mail Security for Microsoft Exchange

Hi there,
I have SBS 2008, and I have recently installed Symantec Mail Security for Microsoft Exchange version 7.5 but when I take a look on Windows SBS Console under Security, it shows "Spam Protection for Email Critical Exchange Server 2007" However,
when I open the SMSME it shows running well with no problem..
Any Suggestions???
Thanks

Hi,
Would you please let me confirm whether all functions (which are related to Exchange Server) run as normal? Just
a confirmation, thanks for your understanding.
Please run
SBS BPA and check if find relevant issues. In addition, please refer to GaryD9’s suggestion in following thread and check if can help you.
SBS
2008 & Forefront Protection 2010 for Exchange - SBS Console Error
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Kaspersky Security 9.0 for Microsoft Exchange Servers

Is anyone using Kaspersky Security 9.0 for Microsoft Exchange Servers with Microsoft Exchange 2010?
We use Kaspersky for SharePoint and it is a good product. We currently use Forefront for Exchange but that product has gone away.
Our Exchange server is protected by McAfee/Intel's cloud SPAM and Antivirus product, but we want an AV solution that is installed on the Exchange server as well.
I cannot find any real world reviews for Kaspersky Security 9.0 for Microsoft Exchange Servers can any Spiceheads help me out?
This topic first appeared in the Spiceworks Community

Hi Amol8k,
Welcome to Nokia Forum!
Have you tried contacting the developer of this application? Try contacting them first so that they can provide you right resolution for these matters. You can reach them through this link: http://support.kaspersky.com/. Let us know what will be the outcome of this.

Can I move the 'Microsoft Exchange Security Groups' OU?

Can I move the 'Microsoft Exchange Security Groups' OU?

OK for Exchange 2007 this is apparently supported
Q: Can I move the default Exchange security groups to another container or domain in the forest?
A: Exchange 2007 uses a new set of security groups to manage the permission model and to maintain coexistence. These groups are as follows:
Exchange Server
Exchange View-Only Administrators
Exchange Public Folder Administrators (New in Exchange 2007 Service Pack 1)
Exchange Recipient Administrators
Exchange Organization Administrators
ExchangeLegacyInterop
By default, these security groups are located in the root domain in the Microsoft Exchange Security Groups organizational unit. They can be moved to different organizational units and also to other domains in the forest. Moving the groups in the forest is supported because these groups have two unique properties: a well-known GUID and a distinguished name that can change. By using these two properties and adding them to the forest’s otherWellKnownObjects attribute during the Setup /PrepareAD task, Exchange can find the security group anywhere in the forest. The directory service will handle updating the distinguished name (DN) of the object when it is moved. In this manner, Exchange does not require a fixed location in the directory.
http://technet.microsoft.com/en-us/library/bb310792.aspx
http://www.pro-exchange.be/modules.php?name=News&file=article&sid=418Deli

Will Microsoft Exchange2000 Portlet work with Exchange 2003

Hi All,
Has anyone tried using Microsoft Exchange2000 Portlet with Exchange 2003 ? Or is there any Portlet available for Exchange 2003 ?
Thanks in Advance.
Dipak

I'm facing problem with Exchange 2003 portlet which is not working with all users. it's working good only with the one user. I mean it doesn't allow the other users to put there user name & Password .
Please help me with this portlet or is there other portlet for exchange 2003
Thanks
Waleed

The connection to Microsoft Exchange is unavailable

Environment: Windows 7 Pro 64bit
Setup: Fresh install of Office 2010 64-bit from office 365 web site on a fresh install of Win 7 Pro 64bit.
Issue: I first launched Outlook and tried to link a new account to the client by putting in my email address and password. It seemed to take it, but a new dialog box keeps poping up asking me for my password (it shows the email address
already filled in). It acts as if it does not like my password, but I know it is correct because I can log in and get my mail through the web access.
When after 5 or 6 tries, I press cancel, I get the error message " The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action." Then I get a
dialog box listing the Microsoft Exchange Server and Mailbox.
Steps to resolve:
I am at a total loss on how to resolve this issue, is there anyway to manually connect to M.E> as it is just saying the connection is unavailable. All of the other threads dealing with this issue have been no help. I can sign into my account
at login.microsoftonline.net so I know the account is valid. I also receive email to my iPhone with the account and server. Any advice would be wonderful.
I went into Control Panel ->Mail, and deleted the profile. Then I tried to create a new profile and I got the same results as the first time through Outlook directly. Also, this is Windows 7 64 and office 64, but in Control Panel, it says
Mail(32bit). This is a completely new install so I don't know why it is not working. I have performed this exact same install on a dozen machines over the last 2 years without a single hitch.
I checked my DNS records and everything seems to check out. I haven't changed anything in DNS for over a year.
I am out of the office so I cannot copy some of the registry entries as some of the other posts recommend.
I ran remote connectivity analyzer. I don't know what it is saying, but below are the things that seemed to be irregular:
1) Attempting to test potential Autodiscover URL https://X123.com:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
2)Testing TCP port 443 on host X123.com to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
Any help would really be appreciated.
Tom

Hi Tom,
Please manually configure your Office 365 account in Outlook 2010 to check whether the issue persists. About how to manually configure Outlook for Office 365 account, please refer to:
http://blogs.technet.com/b/hot/archive/2012/02/06/how-to-manually-configure-outlook-office-365.aspx
If the account can be manually configured but can’t be auto-configured by using autodiscover, please open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address -
uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service. If possible, please post the
Results tab and Log tab here for further troubleshooting.
Regards,
Winnie Liang
TechNet Community Support

The action cannot be completed. The connection to Microsoft Exchange is unavailable. outlook must be online or connected to complete this action

I have outlook 2013 and am trying to add an exchange 2010 multi-tenant account.
I have created a new profile.
I select Manual setup or additional server types
Then select Microsoft Exchange Server or compatible service
I enter the server settings. But the following error is returned when i click check name
"The action cannot be completed. The connection to Microsoft Exchange is unavailable. outlook must be online or connected to complete this action"
I have tried selecting more settings, selecting security, and then selecting the option:- Always propt for logon credentials.
But the same error is still returned
I tried deselecting the option Encrypt data between Microsoft outlook and Microsoft Exchange
But still continue to get the same error.
Reading from other forums I have tried restarting the Microsoft Exchange Address book service under services on the exchange server.
But this did not help either
i am able to access the email accout via outlook web access. I am also able to add the email account to my iphone with the server details and it adds fine onto my iphone but cannot add it to outlook 2013.
any help would be appreciated.
Thanks
Rehan Miah

Hi,
This issue may occur when the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders registry key does not contain all of the required data. Specifically, these problems occur if the
AppData string value is missing from this registry key.
NOTE: The \User Shell Folders key also contains a string value called
Local AppDatawhich is different from the value called AppData. The value that causes this problem (if it is missing) is the
AppData value.
To resolve this issue, import the User Shell Folders registry key from a working Windows User Profile.
For more information, please refer:
http://support.microsoft.com/kb/2264398
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support
I have looked in the registry and Appdata is not missing it has the following value "%USERPROFILE%\AppData\Roaming" also Local AppData is there with the following value "%USERPROFILE%\AppData\Local" i do not have a working machine to import the user shell
folders registry key so any other advice would be useful.
thanks
Rehan Miah
In order to test what you suggested i created a windows 7 virtual machine installed outlook 2003 however i also get the error on the virtual machine that i have created.
any further suggestions would be a great help.

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

OWA 2007 Issue : Microsoft.Exchange.Data.Storage.VirusMessageDeletedException Could not get properties.

Hi I am facing an issue with Outlook web access on my production server Exchange Server 2007 with Sp1. When i try to reply or forward a message from OWA it displays The message has been deleted due to a virus threat . Kindly refer to the below error details. I have a box with all 3 roles installed I do not have an Edge Server . IO have installed Forefront on the same Box as my exchange Server.Below is the Detail of the error . Kindly Help
A virus was found in this message and it has been deleted. For further
information, please contact technical support for your organization.
Click here to continue working.
Copy error details to clipboard
Show details
Request
Url: https://192.168.7.12:443/owa/forms/basic/BasicEditMessage.aspx?ae=Item&t=IPM.Note&a=Reply&id=RgAAAACFMIZq8d7LTqcPs%2bRZA5g%2bBwBDDZWeCojSQZ1bZZ7Ga%2fkWAAAAeCc6AABDDZWeCojSQZ1bZZ7Ga%2fkWAA5iTbjpAAAJ
User host address: 192.168.7.11
User: Munendra Pal Gangwar
EX Address: /o=First Organization/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=mp_gangwar
SMTP Address: [email protected]
OWA version: 8.1.336.0
Mailbox server: PFCDELEXCH01.PFCDOMAIN
Exception
Exception type: Microsoft.Exchange.Data.Storage.VirusMessageDeletedException
Exception message: Could not get properties.
Call stack
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.InternalLoad(PropertyDefinition[]
properties, Boolean forceReload)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties, Boolean canSaveOrDisposeMapiProp)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties)
Microsoft.Exchange.Data.Storage.Item.InternalBindItem(StoreSession
session, StoreObjectId itemId, Byte[] changeKey, ItemBindOption
itemBindOption, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, ItemBindOption itemBindOption,
PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](StoreSession
storeSession, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.LoadMessage()
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Inner Exception
Exception type: Microsoft.Mapi.MapiExceptionVirusMessageDeleted
Exception message: MapiExceptionVirusMessageDeleted: Unable to get
properties on object. (hr=0x80004005, ec=1294) Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=479] Lid: 27161 EcDoRpcExt2
returned [ec=0x0][length=422][latency=15] Lid: 23226 --- ROP Parse
Start --- Lid: 27962 ROP: ropOpenMessage [3] Lid: 17082 ROP Error:
0x50E Lid: 26977 Lid: 21921 StoreEc: 0x50E Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
1238 Remote Context Overflow Lid: 14164 StoreEc: 0xFFFFFA1D PropTag:
0x672D0003 Lid: 8660 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid:
21970 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid: 23921 StoreEc:
0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x672F0014 Lid: 23921
StoreEc: 0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x6708000B Lid:
21970 StoreEc: 0x8004010F PropTag: 0xE960102 Lid: 21970 StoreEc:
0x8004010F PropTag: 0x6708000B Lid: 21970 StoreEc: 0x8004010F PropTag:
0xE960102 Lid: 21970 StoreEc: 0x8004010F PropTag: 0x67760102 Lid:
25394 Lid: 19506 Lid: 27698 Lid: 11285 StoreEc: 0x50E Lid: 21970
StoreEc: 0xFFFFFC07 PropTag: 0x30080040 Lid: 25818 Lid: 6153 StoreEc:
0x50E Lid: 25906 Lid: 5249 StoreEc: 0x50E Lid: 1750 ---- Remote
Context End ---- Lid: 27962 ROP: ropGetPropsSpecific [7] Lid: 17082
ROP Error: 0x4B9 Lid: 26465 Lid: 21921 StoreEc: 0x4B9 Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
26426 ROP: ropGetPropsSpecific [7] Lid: 1750 ---- Remote Context End
---- Lid: 26849 Lid: 21817 ROP Failure: 0x4B9 Lid: 20385 Lid: 28577
StoreEc: 0x50E Lid: 32001 Lid: 29953 StoreEc: 0x50E
Call stack
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32
hresult, Object objLastErrorInfo)
Microsoft.Mapi.MapiProp.GetProps(PropTag[] propTagsRequested)
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)

I had this same issue, except I have Symantec mail security not Forefront. It wound up being a line in the adult content filter. For whatever reason, they included "If you received this email" as one of the literal strings. This is probably part
of almost every corporate confidentiality clause I have ever seen!! go figure......
Thanks for the event log hint- since I have the adult content set to delete, I had no good tracking mechanism in Exhange or SMSME. I set email notifications for the future on these.
Brent
I had this same problem, but I have ESET Mail Security Server. in some one case the problem y solved if I attach the "user@domain" in the "white
List". But in many case the problem is continuous. I have Exchange 2007 in MS Windows Server 2003.
Thanks for yours help.

Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database 1006.

HI all,
I ran into a problem with one of the servers in my DAG. Due to a backup failure, the log partition filled up and the Exchange database went offline on this particular server. The DAG continued to function on the other server. So this particular
DB01 had only some test accounts in it so I removed the database copy. Unfortunately the removal must not have completed correctly.
After recovering the needed space in the partition, I tried to recopy the database and it failed. So I deleted the entire database from the active server and it successfully removed it from the active server. Now on both the servers the database
is not showing, however I'm receiving the error below which indicates to me that the service still thinks the database exists. I am also getting event 4113 Database redundancy health check failed for the database copy as it shows there is only one copy
of the database (failed redundancy) but there should be zero copies.
This database no longer exists in AD as I have verified this with ADSI so it must have something on the exchange server that is still telling the service the database exists.
Can you point me to the location to clean this up?
Log Name:      Application
Source:        MSExchange Mailbox Replication
Date:          02/25/2011 2:00:07 PM
Event ID:      1006
Task Category: Service
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      email1.domain.com
Description:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: DB01
Error: MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropLogon [254]
    Lid: 17082   ROP Error: 0x3EB
    Lid: 26937
    Lid: 21921   StoreEc: 0x3EB
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 22086
    Lid: 27206
    Lid: 17990
    Lid: 16966   StoreEc: 0x8004010F
    Lid: 31433   StoreEc: 0x8004010F
    Lid: 8620    StoreEc: 0x3EB
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x3EB
    Lid: 26297
    Lid: 16585   StoreEc: 0x3EB
    Lid: 32441
    Lid: 1706    StoreEc: 0x3EB
    Lid: 24761
    Lid: 20665   StoreEc: 0x3EB
    Lid: 25785
    Lid: 29881   StoreEc: 0x3EB
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchange Mailbox Replication" />
    <EventID Qualifiers="32772">1006</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-02-25T22:00:07.000000000Z" />
    <EventRecordID>181576</EventRecordID>
    <Channel>Application</Channel>
    <Computer>email1.domain.com</Computer>
    <Security />
</System>
<EventData>
    <Data>DB01</Data>
    <Data>MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropLogon [254]
    Lid: 17082   ROP Error: 0x3EB
    Lid: 26937
    Lid: 21921   StoreEc: 0x3EB
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 22086
    Lid: 27206
    Lid: 17990
    Lid: 16966   StoreEc: 0x8004010F
    Lid: 31433   StoreEc: 0x8004010F
    Lid: 8620    StoreEc: 0x3EB
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x3EB
    Lid: 26297
    Lid: 16585   StoreEc: 0x3EB
    Lid: 32441
    Lid: 1706    StoreEc: 0x3EB
    Lid: 24761
    Lid: 20665   StoreEc: 0x3EB
    Lid: 25785
    Lid: 29881   StoreEc: 0x3EB     </Data>
</EventData>
</Event>

Hi
This error occurs because the MailboxReplicationService (MRS) currently caches Mailbox Database information past the lifetime of some databases.
Restarting the service will clear the cache.
Maybe it is the simplest way to solve it.
If it doesn’t work, you can try cmd to check it.
Get-MailboxDatabase : Can you find the database which you delete?
Remove-MailboxDatabase -Identity "MyDatabase": You can try to delete database if you can see the database.

Microsoft Exchange Server 2013 Cumulative Update 7 Setup - Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error - Set-SharedConfigDC

What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:

Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support

BB Torch 9810 direct access mailbox Microsoft Exchange 2010

Hi,
Wanna check whether in anyway my BB could direct access mailbox Microsoft Exchange 2010 without BES (private and/or Company). Thanks
BR

Hi eddiesonka,
"Why" is truly a difficult question for us end users to truly know the answer to. Typically, I shy away from those since, well, not being an insider, I can only have my own personal theories. But, this topic is one that I'm OK presenting my theories on.
The basic answer is that different is different. Non-BB devices do things in their way, BBs do them in their way. Consequently, we all have choice, which is a good thing in a free market society, I think!
Unlike other devices (e.g., ActiveSync), BBs do not technically have a full on-device email client. Other devices, with a full on-device client, conduct all device to email server activities directly. BBs use the carrier/RIM hosted BIS service as an intermediary between the BB and the email server. The main benefit is one of data plan consumption. With non-BBs, the full on device email client must check the server for new email on a periodic basis (yes, I know that some services have more PUSH, but many are still PULL), generating traffic over the carrier data network even when there is no new email on the server. With BBs, that "check for new email" is done by BIS, completely independent of the BB...so no traffic to the BB is generated unless BIS finds something on the server that needs to come to the BB. For folks on limited data plans and limited WiFi access, this can become important.
So, it is up to the consumer to completely research the different choices available to them...and make their selection according to their own unique set of requirements and desires. RIM is advancing BIS...with GMail and Yahoo, there now are some calendar and contact OTA synchronization capabilities that did not exist in the past. With luck, they will continue to develop BIS and enable more and more OTA functions to BIS-level customers -- while, of course, at the same time, preserving their dominance in the mobile security world! And remember, for enterprises, RIM has made BES-X totally free...
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Microsoft Exchange Portlet security

Similar Messages

Maybe you are looking for