Microsoft Exchange Server 2003 Small Business Server
Has anyone been successful syncing email with a MS Exchange Server 2003 Small Business Server?
My IT guy has tunred on IMAP, but still no luck. Just get a warning message that the iPhone cannot connect to the server.
Thanks.
Turning IMAP on is the 1st step. IT will also need to open that port (143) on the firewall.
Similar Messages
-
Upgrade from Server 2003 Small Business Edition
Hi
I have one DC with 2003 Small Business version. I have upgraded it to Domain Functional Level 2003. When I try to add a server 2012 DC , the error message on the Server 2012
server manager communicates that the level is 2000.
I have checked the DNS setting on the DC with 2003 and there is a A record for the DC, DNS seems to be fine as I was reading that this problem occurs when
DNS is not configured correctly.
The DNS server is server is currently the 2003 DC.This one may help.
http://fawzi.wordpress.com/2009/10/30/quick-tip-query-active-directory-functional-levels/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Microsoft Exchange Server 2003 and Windows 8 Compatibility
Is there a fix or workaround for accessing email via Outlook 2013 (Windows 8) when your company uses Microsoft exchange server 2003 and has not plans on upgrading it any time soon. I am a remote employee so I am the only one that has this problem in the
company. I can access email through an owa account but it's a pain. I tried to set up a rule to have all incoming mail forwarded to my gmail account in Outlook 2013, but that did not work. Any other ideas?If server has enabled ActiveSync you can use Windows 8 Mail Client - works almost like Outlook.
AFAIR Outlook 2013 can't work with Exchange 2003.
Regards, Konrad Sagala, MCT, MCSE+M, MCITP: Exchange 2007/2010, Lync 2010, Office365, Windows 2008, Virtualization -
How to set Iphone 4s to sync with Microsoft Exchange server 2003?
I am unable to set up my Microsoft Exchange Server with my Iphone 4s. The exchange server is 2003 with Service Pack 2 installed.
I have gone through the steps, but I get a box entitled “Exchange Account”saying “Unable to verify account information”.Hello,
Seems you are not using an Exchange server account, please refer to the following link and try to set the out of Office notices with POP3, IMAP, and Outlook.com accounts:
http://office.microsoft.com/en-us/outlook-help/send-out-of-office-notices-with-pop3-imap-and-outlook-com-accounts-HA010248748.aspx
Best Regards,
Steve Fan
TechNet Community Support -
Dear All,
I cannot connect to my Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service".
First I would like to present my network environment, I have 4 physical servers;
The first one is holding the Domain Controller 1, IP@: 192.168.1.10
The second server is holding the additional Domain Controller which it is DC2, IP@: 192.168.1.11
The third server is holding the Exchange 2013 Mailbox, IP@: 192.168.1.15
And the last server is holding the Exchange 2013 CAS-HT, IP@: 192.168.1.16
I am doing the steps below:
1-Creating a new profile in outlook and start configuring the exchange account by entering the IP address of the Exchange-CAS Server, 192.168.1.16
2-entering the account name: [email protected]
3-Go to "More Settings" > "Connection" > "Connect to Microsoft Exchange using HTTP" > and entering the "Exchange Proxy Settings"
4-type the exchange CAS Server URL, https://192.168.1.16
5-Check the "Connect using SSL Only"
6-Authentication Settings: "NTLM Authentication", and pressing Apply
7-When I press the "Check Name" button, a message occurred> "The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action".
8-I go back to the "Exchange Proxy Settings" and I Uncheck the "Connect using SSL Only" and pressing Apply
9-i press the "Check Name" Button, a small window occurred to enter a Username and Password, so I enter the Administrator username and the administrator password and pressing "OK", but nothing is changed, I tried to enter my
username and password in the small window and I still got the same result.
I cannot verify the account name and I cannot complete the process.
I appreciate you kind assistance.Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Try to login the test account through OWA.
2. Check the Autodiscover settings: get-clientaccessserver |fl autodiscoverserviceinternaluri
3. Check the result of directly accessing the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Thanks,
Angela
Angela Shi
TechNet Community Support -
Microsoft Exchange Server on Mac OS X Server
I am running Mac OS X Leopard Server on my Mac Pro with multiple clients, all using Mac OS X Leopard. Each client also has Microsoft Office 2008 for Mac installed with Entourage. Is it possible to install Microsoft Exchange Server on the Mac Pro and use it to set up calendaring for all of my Mac clients through Entourage?
Hi Benjamin,
Apologies for Jeff's rather useless answer.
You can absolutely install Microsoft Exchange on a Mac Pro server to accompany OS X Server.
Head over to VMware, Parallels or Oracle and grab a virtualisation hypervisor. I personally recommend VMware ESXi.
Setup a Virtual Machine running a copy of Microsoft Windows Server 2012 and Microsoft Exchange Server 2013. (More information here http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx#fbid=f4pyYTvvgji and here http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-2013-business-email-email-server-try-now-FX103765014.aspx)
If you would rather not involve yourself with all the fuss involved with maintaining Microsoft Exchange, head over to Microsoft Office's website and Subscribe to Office 365 for Business. If you would rather not work with Microsoft at all, head over to Google
and setup Google Apps.
Thanks,
Will -
Using Microsoft Exchange Server in SOA Suite
Hi Gurus,
I want to use Microsoft Exchange Server for sending email notifications in SOA Suite.
I tried connecting to my company( Exchange Server) SMTP name and port no but its failing with all options ( SSL, TSL , NONE).I even tested with OSB, adding SMTP server and sending mail using Business Service but it's failing
I have tested with Apache James and Gmail as email server and it works fine,but problem comes when in want to configure it with company Exchange Server
Did any one have configured/tried connecting to Microsoft Exchange Server using SOA Suite. Please provide your inputs.
Socket Excpetion while sending emails in 11g
says Oracle UMS does not works with Microsoft Exchange Server and we need to replace some jars.
Please suggest !!
Regards,
Abhinav GuptaHi Neeraj,
for OutgoingMailServerSecurity : TLS
*******error*****
******** in Email Driver Logs *********
javax.mail.MessagingException: Can't send command to SMTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.smtp.SMTPTransport.sendCommand(SMTPTransport.java:1564)
at com.sun.mail.smtp.SMTPTransport.sendCommand(SMTPTransport.java:1551)
at com.sun.mail.smtp.SMTPTransport.ehlo(SMTPTransport.java:935)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:426)
at javax.mail.Service.connect(Service.java:310)
at javax.mail.Service.connect(Service.java:169)
at javax.mail.Service.connect(Service.java:118)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:780)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
*****IN console Logs *******
Jun 25, 2012 3:45:36 PM IST> <Error> <oracle.soa.services.notification> <BEA-00
0000> <<.> Error status received from UMS.
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : javax.mail.MessagingException: Can't send command to S
MTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorExc
eption: PKIX path building failed: sun.security.provider.certpath.SunCertPathBui
lderException: unable to find valid certification path to requested target,
Addressed to : EMAIL:abhinav.gupta@*********.com,
UMS Driver : Farm_base_domain/base_domain/AdminServer/usermessagingdriv
er-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : 23239c4f0ac0064b017335c74f86a8e9,
Gateway message Id : ****.outlook.com:[email protected]@*******.com,
Status Received at : Mon Jun 25 15:45:34 IST 2012.
Check status details and fix the underlying reason, which caused error.
>
********error *******
for OutgoingMailServerSecurity : NONE
*******error*****
******** in Email Driver Logs *********
javax.mail.MessagingException: [EOF]
at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:1481)
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1512)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1054)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:634)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:781)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
*****IN console Logs *******
<Jun 25, 2012 3:57:10 PM IST> <Error> <oracle.soa.services.notification> <BEA-00
0000> <<.> Error status received from UMS.
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : javax.mail.MessagingException: [EOF],
Addressed to : EMAIL:abhinav.gupta@*****.com,
UMS Driver : Farm_base_domain/base_domain/AdminServer/usermessagingdriv
er-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : 232e2ab70ac0064b01cd6ee979e494ed,
Gateway message Id : ****.outlook.com:[email protected].******.com,
Status Received at : Mon Jun 25 15:57:04 IST 2012.
Check status details and fix the underlying reason, which caused error.
*******error*****
Please suggest me what to do !! I am stuck with it for last two days !! -
Help on setting up a forwarding rule for 2007 microsoft exchange server
can someone pls link or tell me how to set up a forwarding rule on a 2007 microsoft exchange server. I can only find stuff on a 2003 server and they are not quite the same.
Thxchk this MS KB : http://technet.microsoft.com/en-us/library/bb851509.aspx
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved. -
Which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)
Hi everyone,
Can anyone tell me which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)? Is Exchange server 2007, 2010 and 2013 support it?
ThanksExchange OLE DB was removed from Exchange Server 2010 in Jan 2010. So, it is only available with Exchange
2007, 2003 and 2000. You can visit http://blogs.msdn.com/b/deva/archive/2010/01/13/update-technologies-not-available-with-exchange-2010-their-migration-reference-s.aspx
for more info. -
Microsoft Exchange Server Active Sync issue
When I purchased my Droid Incredible I set up my account for my work email. My job uses Microsoft exchange server so I had no issues getting setup and started.
A week later my email stopped syncing. I deleted the account and set it up again. That temporarily fixes the problem. Another week passes and I have the same problem. I reset my phone and set up the my email account again. No issues until one week later when it does it again.
Unless I can find a solution to this problem I think this phone will have to be returned. Don't get me wrong, this phone is great but email is the reason I purchased this phone. There are 52 weeks in a year. I can't see myself resting my email account every week.
Any help would be appreciated!
Thx
TainoEI had the same problem when I first purchased the phone back in May. I had about 60,000.00 emails from the past 5 years in my main server at work that I had not deleted. My IT guy told me that I had to delete my old emails and that the INC works from the main server and I had way over the amount that I should have. I work for a very busy RE firm in NYC and we get about 150 emails a day, which ads up fast. Once I dld as he suggested the phone has not had one problem w/ outlook or syncing again. The Iphone works in the exact same way. BB's operate from their own server so are not as effected by this as much. The phone works great with outlook, and actually quicker and better than my BB. Good luck!!
-
"Your mailbox has been temporarily moved on Microsoft Exchange Server"
Exchange 2003, Outlook 2007
In Outlook, the Inbox folder does not show up under Mailbox - User Name. Starting with "Outlook Today" and clicking on the "inbox" like he can get to his messages.
In OWA the envelope icon shows up but instead of saying "Inbox" it had a URL like "http://video.google.com&search="...
I used exmerge to extract the data for the user, deleted the mailbox, then used exmerge to import it back.
"Inbox" now shows up in OWA but when Outlook is launched it gives this message:
"Your mailbox has been temporarily moved on Microsoft Exchange Server. A temporary mailbox exists, but might not have all of your data. You can connect to the temporary mailbox or work offline with all of your old data. If you choose to work with your old data, you cannot send or receive e-mail messages."
Did I miss a step somewhere?I just encountered the same problem, and was able to get all of my old data back to my new profile (contacts, saved e-mails, inbox folders, etc.). Before creating a new profile, when the error message appears,
choose the option to use old data. When outlook loads (using Outlook 2010), go to File -> Options and click on 'Advanced'. You should see an 'Export' section, click on the 'Export' button. An 'Import and Export Wizard'
window will appear, click on 'Export to a File' and click next, then choose 'Outlook data file (.pst)'. The next screen will ask you a folder to export, in which you can choose from all your outlook folders...for a complete backup, I suggest choosing
the root folder. It should be the name of your profile, for example: "username @hotmail.com". Make sure 'Include subfolders' is checked. The final screen will ask what location to store the .pst file in, and if you want to add a password
to it. Now you've backed up all your Outlook data :)
To import the .PST to your new profile, make sure to change Outlooks default profile to the new one you've created (as Deli suggested). When outlook loads up, click on File -> Open, and then click on 'Import'. Choose 'Import from another program
or file' and click next, then choose 'Outlook data file (.pst)' and click next. Now you just point it to the .pst file you exported earlier, and all of your information will be imported into Outlook in its own folder. From there you can drag everything
(emails, contacts, etc.) into the folders that you want. And that's it, hope this helps someone else. -
With Microsoft exchange server, leave messages UNREAD even if read on blackberry?
We are having issues that seems complicated but I'm sure there's a solution..
Sometime while at a restaurant or waiting for a light, I get a message on the blackberry but I can't fix the problem right a way or it can wait until I'm back at the office to be fixed, now when I get back to the office, I open Microsoft outlook 2003, (running off Microsoft exchange server) the message downloads into my inbox, but tagged as read.
Here is my question:
If I read a message on my blackberry, how do I leave the message unread on the exchange server? I have the MIKE (Telus) or Nextel if you prefer 8350i but I also have 9 other blackberry curve 8330 with the same problem.
Is there a way , an option leave unread on the server until downloaded to INBOX?
Any help would be appreciated.
Alainis this via BIS or BES?
If you disable reconcile on BES you can achive what you want.
Messages Options - Email reconciliation -
wireless reconcile = no
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
We are transitioning from Exchange 2003 to Exchange 2010. We found Outlook online mode (non-cached mode) have many warning "Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]", usually happen when users tried to open
address book but sometimes even normal operation like click the Send button. The problem does not affect OWA and extremely rare when Outlook is running in cached mode. Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops.
We have a lot from the CAS/HT to DC/GC on TCP_3268 and LDAP. And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK.
We also have a lot from CAS/HT to the Outlook Clients on the static RPC port (TCP_59933). And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK and RST-ACK, ACK.
This happens even on Outlook 2010 which I though it has TCP Keep Alive implmented to keep the session active within 1 hour.
Can somebody tell me if these out-of-state are the cause of our problem? And how to fix it?
THANK 1,000,000Hello AndyHWC,
I did some consulting with our CAS team and received the following feedback to your post:
It is difficult to determine what is causing resets without seeing the captures first hand however, the concern is that you are seeing dropped packets on the firewall logs. Where is this firewall located?
Based on the description "Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops." and "We have a lot from the CAS/HT to DC/GC on TCP_3268 and
LDAP." indicates to me that the firewall is between CAS and GC. This not supported under any circumstances and would explain the issue they are seeing with clients trying to "retrieve data from the GC".
If there is not a firewall between the GC and CAS then a Microsoft support engineer would need to have concurrent Netmon Captures from client, CAS, GC during the
issue to analyze. If only one GC exists consider adding another GC to handle the client requests and for fault tolerance.
Also verify that all NIC card drivers are updated to the latest driver version
More information about firewalls with Exchange 2007/2010
http://msexchangeteam.com/archive/2009/10/21/452929.aspx
http://technet.microsoft.com/en-us/library/bb232184(EXCHG.80).aspx
You can install the Client Access server role on an Exchange 2007 computer that is running any other server roles except for the Edge Transport server role. You
cannot install the Client Access server role on a computer that is installed in a cluster. Installation of a Client Access server in a perimeter network is not supported.
http://technet.microsoft.com/en-us/library/dd577077(EXCHG.80).aspx
“The Installation of a Client Access Server in a Perimeter Network Is Not Supported
Issue You may want to install an Exchange 2007 Client Access server in a perimeter network. However, this type of installation is not supported in Exchange
2007.
Cause The Exchange 2007 Client Access server role is not supported in any configuration in which a firewall is located between the Client Access server
and a Mailbox server or a domain controller. This includes firewall devices, firewall programs, or any program or device that is designed to restrict traffic between two network locations.
For correct operation, Client Access servers require typical domain connectivity to domain controllers and global catalog servers. Because any devices
or programs that restrict or reduce access to domain controllers or global catalog servers may affect the correct operation of the Client Access server, we do not support this type of configuration.
Resolution To resolve this issue, move the Client Access servers to the internal network. For more information about the ports that Exchange 2007 uses
for various services, see Data Path Security Reference.”
Thanks,
Kevin Ca - MSFT
Kevin Ca - MSFT -
How to integrate Microsoft Exchange Server with Oracle 11i EBS
Hello
Can Microsoft Exchange Server be integrated with Oracle??
If yes then HOW ??
Regards
FahadI have been with 2 clients that have used Exchange Server 2003 for processing Workflow Notifications for multiple 11.5.10.2 with ATG.H RUP 4 instances. I have found that Exchange will frequently take 4 hours to send notifications and 2-4 hours to process notifications that are replied back to it. Outbound messages generally fail with 451 Timeout waiting for client input errors, but finally send after about 4 hours. If you doing a live demo that needs to make use of Workflow Notifications, plan on waiting and waiting and waiting...
-
How to read emails from Microsoft Exchange Server
I have microsoft exchange server and I want to read emails from microsoft exchange server. There is no POP3 server. So is it possible?
If it is possible to read emails from microsoft exchange server then please give me some idea.
Thanks
Santanusantanu wrote:
Hi,
My company is using Microsoft exchange server.
IMPA and POP3 has been disabled, but my requirement is I wan to read email.Then ask the administrator of the server to enable IMAP. If you have a valid business requirement to do that, there would be no reason for the administrator to refuse.
Maybe you are looking for
-
Mail Crashed - Inbox Deleted - Trying Data Recovery - Help
I am running a G4 Powerbook 10.3.9 and Mail 1.3.11 locked up and crashed. My old Inbox is wiped out. Last July, I accidentally deleted my Sent emails but that was intentional (as in I thought I was in the Trash window, selected All and Deleted but as
-
please help ive just upgraded from lightroom 3.6 to 5 as a download but it wont open when i click it on my MAC os 10.7.5? any help much appreciated as it is really annoying me as I cant find any help on this on the internet thank you very much in a
-
Opening a folder with an application in one click, and automating Terminal
A forum member kindly recommended I move a question from 'Mac OS X Leopard' to this sub-forum as it was more appropriate to Unix: Firstly, is it possible to create a desktop/dock icon (or perhaps a Safari or FireFox bookmark) that opens a folder with
-
Hi Experts, I need to create new copy conrol routine in Data tranfer for copying over the Contract Start date and End Date since currently there is no copy routine assigned for Table VEDA. How to get this table in routine, becasue there is no existin
-
Req for tbirdparis re: arrange page tips
Hello there tbirdparis, in a previous thread you mentioned using blank tracks and such to make your arrange page more orderly and easier to use. Would you be willing to post a screenshot of this? Thanks for your time...