Microsoft Exchange Server 2013 - Unable to recieve emails from outside
I'm having problems setting up brand new installation of EXCH 2013 on the VM server.
Infrastructure - main server Windows Server 2012 Standard, a VM server. Domain vwc.local, VM server introduced to domain. EXCH 2013 installed on VM server.
I'm able to send emails outside, but unable to receive ones from outside. Server provider A, MX records point to mail server. The local router redirect SMTP traffic to VM server - all ports.
According to Wireshark the SMTP traffic hits the VM server, but no connection with EXCHG receivers can be established. The external domain name - valleywomenscarepllc.com. Firewall is turned off. The receive connectors are setup to accept anonymous connection,
use all ip addresses associated with the VM server network adapter. Netstat shows that 25 port is available. Connectors are in an valid state by running ECHG commandlets.
I'm running out of ideas. Please suggest an area for research or request additional info to narrow down possible causes.
Thanks in advance!
Thanks to everyone!!!
Turned out that MX record was pointing to mail.valleywomenscarepllc.com. I changed to point to valleywomenscarepllc.com and all immediatelly - external OWA, ECP started working as well outside emailed delivering.
I've been fighting with EXCHG for over month, encountered multiple issues, and finally got it working. Thanks to everyone for suggestions!
Can anyone suggest on mobile dvice access. I setup my iPhone mail to to work with valleywomenscarepllc.com, however I get error that the server cannot be verified. ECP\Mobile access is on, no mobile device policies are in the effect, the autosync is
allowed on the user mailbox level though I get this error. Has anyone ever encountered similar issue?
Similar Messages
-
What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support -
I need to buy Microsoft Exchange Server 2013 License.
I need to buy exchange 2013 license but problem is that I have total 175 users in my organization and then exchange standard license support upto 5 mailboxes and exchange enterprise support upto 100 mailboxes. My boss want to have each user have separate
mailbox..
So i am looking a solution for 175 users with 175 mailboxes. If anyone can help me and guide me which exchange server is best and how can i manage 175 separate mailboxes ????
note: in future i also want to have symantec exec backup solution (mailboxes archiving) for that exchange server which i deploy in my organization.
need fastest response.
thanks in advanceHi FAISAL,
Regardless of which version of the Exchange 2013 will not limit the number of mailboxes, however,different versions of the
restrictions embodied in the number of databases.
More details please refer to the following article:
Exchange 2013: editions and versions
Microsoft Exchange Server 2013 is available in two server editions: Standard Edition and Enterprise Edition. Enterprise Edition can scale to 50 mounted databases per server in the Release to Manufacturing (RTM) and Cumulative Update 1 (CU1) versions, and
100 mounted databases per server in Cumulative Update 2 (CU2) and later versions; Standard Edition is limited to 5 mounted databases per server.
Best regards,
Niko Cheng
TechNet Community Support -
So, I have decompressed my brand new download of Exchange 2013 SP1. This was downloaded from the link at the bottom of the post.
So to start my upgrade I have tried to start by running the schema preparation which then advises me that I am welcomed to:
'Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup'
Is this poor QA or was the incorrect file uploaded?
http://www.microsoft.com/en-us/download/details.aspx?id=41994Hello,
Powershell need full path to file you want to run.
So you should run .\setup.exe instead of just setup.exe.
Hope this help.
Regards, Pavel. -
How to clone Microsoft Exchange Server 2013 configurations from one server to another server?
Hi! I need help of cloning Microsoft Exchange Server 2013 configurations from my first Server to the second Server. By doing this, the second Server will replace and run as per normal as the first Server is. How can this be done?
Thanks!Cloning an Exchange Server is a very bad idea. Exchange is very heavily intergrated into Active Directory and this can (and honestly not to sound scary probably will) cause major issues in your environment.
Also, since you cannot have 2 servers with the same name in the same domain/network running at the same time you'll need to change the name of one of the servers. That is a huge no-no with Exchange and requires a complete uninstall/reinstall of the
product.
Now requirements differ between environments, but if you are in a scenario where you want to move from 1 Exchange 2013 (or 2010 for that matter) Server to another machine running the same version of Exchange AND (this is a big requirement for the failover
cluster piece) the Operating Systems of the machines are the same (i.e going 2012r1 to 2012r1 or 2012r2 to 2012r2 and not 2012r1 to 2012r2) you can do what Brenle suggested with the DAG and DB copies. If the Operating System of the new machine is different
(2012r1 to 2012r2) then you will will not be able to use a DAG, and will need to perform mailbox moves to move between servers.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
Error occurred at the 7 of 15 step of Microsoft Exchange Server 2013
Hi all to every techies ....
I'm a new to exchange server 2013 , I tried to install exchange server 2013 on windows server 2012 but couldn't get the success , It stops either 7 or 8 step of 15 , I tried to google it out but can not getting any progress , I tried to remove it , I deleted
by using ADSI Edit then I removed from the IIS then I delete the Microsoft folder from the Installed directory , and also I removed it from the registry editor as well , Thing thing is pulling my hair out my scalp , Any related help highly appreciated ,
The registry key (pickup / transport) doesn't exist in specified registry location , (i.e HKEYLM_SOFTWARE_MICROSOFT_EXCHANGESERVER
Thank you all
Neil PatricHi,
To understand more about the issue, I’d like to confirm the detail error when the installation failed.
As far as I know, deployment of an Exchange Server 2013 server goes through three main stages.
1. Preparing Active Directory (if you are installing Exchange Server 2013 for the first time)
2. Installing the Exchange Server 2013 pre-requisites on the server
3. Running Exchange Server 2013 setup
For more information, you can refer to the following article:
http://exchangeserverpro.com/how-to-install-exchange-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Angela Shi
TechNet Community Support -
Exchange Server 2013: Not Receiving Internet email
Hello Guys, I have a new Exchange 2013 install and i am having problems receiving internet email. When testing from https://www.testexchangeconnectivity.com it fails at the last step when it tries to send a test email. I get the following response:
The server returned status code 451 - Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
Exception details:
Message: Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
Type: System.Net.Mail.SmtpException
Stack trace:
at System.Net.Mail.DataStopCommand.CheckResponse(SmtpStatusCode statusCode, String serverResponse)
at System.Net.Mail.DataStopCommand.Send(SmtpConnection conn)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at Microsoft.Exchange.Tools.ExRca.Tests.SmtpMessageTest.PerformTestReally()
Any Suggestions??http://gerhardwessels.wordpress.com/2013/05/06/451-4-7-0-temporary-server-error-please-try-again-later-prx2/
Check the above mentioned settings -
Dear colleges,
Thanks in advance for viewing and suggesting!
Now for whatever reason it is the XCHG server is not responsive at all when launching ECP from the other computer on the domain. When logging in to the virtual box EXCH server is hosted on it hangs on the "Applying user settings" message for
an about an hour when finally logged in 4 or 5 XCHG services won't start... I don't remember exactly which ones - "...Mailbox Transport..." is one of them.
I read about the similar being an issue with Win 2008 R2 and EXCH server 2010, and followed the advice that I needed to add some entries to the registry - didn't help, disabling IP6 (which by the way makes no sense as XCHG needs one) - still didn't help.
Would you suggest to rebuild virtual server and reinstall EXCH all together as troubleshooting Windows issues may be lengthy?
Thanks!Thanks folks! I think I have a clue what's going through don't know how fix it yet.
The problem is with DNS unable to resolve my main domain vwc.local. It makes some XCHG services to time out when starting. The error messages in the event log suggest about domain being unavailable
to contact.
When I tried resolving vwc.local with nslookup and ping it pinged THE OLD domain's IP address. When I setup server at home I specified this old ip address but changed it to a new one when I
moved box to the office. In the office everything worked very well - I introduced office's desktops to vwc.local, built a virtual box, introduced it the domain as well. Everything was good up until I started messing with XCHG. Now the domain is not resolvable
even though I made to be pinged to the new address by updating network adapter settings at the main server by selecting some checkboxes. But the vwc.local is still not available at VW where the XCHG is hosted on. When I open Server Manager/AD DS/AD DS
manager it gives me an error message about the DC being unavailable to contact.
How do I fix this domain mess now? Now I have 3 issues to deal with:
1. My remote desktop stopped working due to trial expiration even though I licensed server for 5 RDSCALs. This is a known issue with RDS and AD DS roles hosted on one physical box. Nobody seems
to know the step by step solution to the issue. I just got bunch of recommendations that I already followed. It looks like I need to call Microsoft and have them deal with their buggy software altogether.
2. DNS/domain issues described below. Something very weird. May I try re prepping the AD DS on the main server. I didn't try that may be I will.
3. XCHG not receiving messages from the outside.
:) Let's just focus on DNS/domain for a moment.
Thanks in advance! -
Exchange server 2013 Installation issue
Dear Experts,
Thanks in advance...
I am not able to Install Exchange server 2013. I have tried my best to Install but not success. Please find my system configuration.
Dell Laptop Intel I5 1.7 GHZ
RAM -8GB
Vmware workstation 9.
Steps I followed
Created a VM inside Vmware and Installed windows 2012 Std. Edition
Memory assigned to VM is 1 GB
All prerequisites completed and tried to Install Exchange server 2013 SP1
During installation it asked me to select the role to Install and I selected Mailbox server role and CAS
Exchange setup process started at 3 P.M till 9 P.M setup was not finished finally setup process halt and I got the error setup could not completed .
Please find the logs for your reference.............
04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
[04/13/2015 08:41:02.0303] [0] **********************************************
[04/13/2015 08:41:02.0303] [0] Local time zone: (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi.
[04/13/2015 08:41:02.0303] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[04/13/2015 08:41:02.0328] [0] Setup version: 15.0.847.32.
[04/13/2015 08:41:02.0328] [0] Logged on user: WIN-4D2C2JMF5R1\Administrator.
[04/13/2015 08:41:02.0336] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0368] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:02.0600] [0] Command Line Parameter Name='sourcedir', Value='C:\Softwares\Exch-13'.
[04/13/2015 08:41:02.0615] [0] Command Line Parameter Name='mode', Value='Install'.
[04/13/2015 08:41:02.0632] [0] RuntimeAssembly was started with the following command: '/sourcedir:C:\Softwares\Exch-13 /mode:Install'.
[04/13/2015 08:41:02.0632] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/13/2015 08:41:05.0504] [0] Finished loading screen CheckForUpdatesPage.
[04/13/2015 08:41:13.0567] [0] Starting file's copying...
[04/13/2015 08:41:13.0599] [0] Setup copy files from 'C:\Softwares\Exch-13\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[04/13/2015 08:41:13.0794] [0] Finished loading screen CopyFilesPage.
[04/13/2015 08:41:15.0033] [0] Disk space required: 1826493368 bytes.
[04/13/2015 08:41:15.0033] [0] Disk space available: 46620041216 bytes.
[04/13/2015 08:42:55.0484] [0] Finished loading screen InitializingSetupPage.
[04/13/2015 08:42:55.0484] [0] File's copying finished.
[04/13/2015 08:43:13.0922] [0] Setup is choosing the domain controller to use
[04/13/2015 08:43:28.0885] [0] Setup is choosing a local domain controller...
[04/13/2015 08:43:32.0221] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
See the Exchange setup log for more information on this error.
[04/13/2015 08:43:32.0335] [0] [ERROR] Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] [ERROR] The LDAP server is unavailable.
[04/13/2015 08:43:32.0366] [0] Setup will use the domain controller ''.
[04/13/2015 08:43:32.0366] [0] Setup will use the global catalog ''.
[04/13/2015 08:43:32.0596] [0] No Exchange configuration container was found for the organization. Message: 'Active Directory server
is not available. Error message: Active directory response: The LDAP server is unavailable.'.
[04/13/2015 08:43:32.0707] [0] The following roles have been unpacked:
[04/13/2015 08:43:32.0721] [0] The following datacenter roles are unpacked:
[04/13/2015 08:43:32.0739] [0] The following roles are installed:
[04/13/2015 08:43:32.0739] [0] The local server does not have any Exchange files installed.
[04/13/2015 08:43:32.0834] [0] Server Name=WIN-4D2C2JMF5R1
[04/13/2015 08:43:33.0032] [0] Setup will use the path 'C:\Softwares\Exch-13' for installing Exchange.
[04/13/2015 08:43:33.0084] [0] The installation mode is set to: 'Install'.
[04/13/2015 08:43:51.0460] [0] Exchange organization name is required for this mode.
[04/13/2015 08:43:51.0460] [0] Active Directory Initialization status : 'False'.
[04/13/2015 08:43:51.0472] [0] Schema Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Organization Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0472] [0] Domain Configuration Update Required Status : 'False'.
[04/13/2015 08:43:51.0536] [0] Applying default role selection state
[04/13/2015 08:43:51.0565] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:43:51.0565] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:43:51.0565] [0] InstallModeDataHandler has 0 DataHandlers
[04/13/2015 08:43:51.0565] [0] RootDataHandler has 1 DataHandlers
[04/13/2015 08:43:52.0848] [0] CurrentResult launcherbase.maincore:90: 0
[04/13/2015 08:43:53.0067] [0] Finished loading screen WelcomePage.
[04/13/2015 08:44:06.0654] [0] Finished loading screen EULAPage.
[04/13/2015 08:44:10.0679] [0] Finished loading screen RecommendedSettingsPage.
[04/13/2015 08:44:13.0814] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:13.0814] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:13.0814] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:13.0844] [0] InstallModeDataHandler has 8 DataHandlers
[04/13/2015 08:44:14.0048] [0] Finished loading screen RoleSelectionPage.
[04/13/2015 08:44:18.0619] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0619] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0619] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 9 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 10 DataHandlers
[04/13/2015 08:44:18.0632] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0632] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0632] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0632] [0] InstallModeDataHandler has 11 DataHandlers
[04/13/2015 08:44:18.0648] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:18.0648] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:18.0648] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:18.0648] [0] InstallModeDataHandler has 12 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0644] [0] InstallModeDataHandler has 13 DataHandlers
[04/13/2015 08:44:22.0644] [0] Setup is determining what organization-level operations to perform.
[04/13/2015 08:44:22.0644] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[04/13/2015 08:44:22.0644] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[04/13/2015 08:44:22.0656] [0] InstallModeDataHandler has 14 DataHandlers
[04/13/2015 08:46:00.0423] [0] Finished loading screen InstallationSpaceAndLocationPage.
[04/13/2015 08:46:28.0427] [0] Finished loading screen ExchangeOrganizationPage.
[04/13/2015 08:46:30.0221] [0] Finished loading screen
Regards
BiswajeetHi,
Please find the DC Health check report.
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = EX-13
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\EX-13
Starting test: Connectivity
......................... EX-13 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\EX-13
Starting test: Advertising
......................... EX-13 passed test Advertising
Starting test: FrsEvent
......................... EX-13 passed test FrsEvent
Starting test: DFSREvent
......................... EX-13 passed test DFSREvent
Starting test: SysVolCheck
......................... EX-13 passed test SysVolCheck
Starting test: KccEvent
......................... EX-13 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... EX-13 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... EX-13 passed test MachineAccount
Starting test: NCSecDesc
......................... EX-13 passed test NCSecDesc
Starting test: NetLogons
......................... EX-13 passed test NetLogons
Starting test: ObjectsReplicated
......................... EX-13 passed test ObjectsReplicated
Starting test: Replications
......................... EX-13 passed test Replications
Starting test: RidManager
......................... EX-13 passed test RidManager
Starting test: Services
......................... EX-13 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000272C
Time Generated: 04/14/2015 18:01:37
Event String:
DCOM was unable to communicate with the computer fec0:0:0:ffff::1 us
ing any of the configured protocols; requested by PID 4e4 (C:\Windows\syste
m32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 04/14/2015 18:01:49
Event String:
DCOM was unable to communicate with the computer fec0:0:0:ffff::2 us
ing any of the configured protocols; requested by PID 4e4 (C:\Windows\syste
m32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 04/14/2015 18:02:02
Event String:
DCOM was unable to communicate with the computer fec0:0:0:ffff::3 us
ing any of the configured protocols; requested by PID 4e4 (C:\Windows\syste
m32\dcdiag.exe).
......................... EX-13 failed test SystemLog
Starting test: VerifyReferences
......................... EX-13 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : NETMAGIC
Starting test: CheckSDRefDom
......................... NETMAGIC passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... NETMAGIC passed test CrossRefValidation
Running enterprise tests on : NETMAGIC.IN
Starting test: LocatorCheck
......................... NETMAGIC.IN passed test LocatorCheck
Starting test: Intersite
......................... NETMAGIC.IN passed test Intersite
Regards
Biswajeet -
Microsoft Exchange Server on Mac OS X Server
I am running Mac OS X Leopard Server on my Mac Pro with multiple clients, all using Mac OS X Leopard. Each client also has Microsoft Office 2008 for Mac installed with Entourage. Is it possible to install Microsoft Exchange Server on the Mac Pro and use it to set up calendaring for all of my Mac clients through Entourage?
Hi Benjamin,
Apologies for Jeff's rather useless answer.
You can absolutely install Microsoft Exchange on a Mac Pro server to accompany OS X Server.
Head over to VMware, Parallels or Oracle and grab a virtualisation hypervisor. I personally recommend VMware ESXi.
Setup a Virtual Machine running a copy of Microsoft Windows Server 2012 and Microsoft Exchange Server 2013. (More information here http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx#fbid=f4pyYTvvgji and here http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-2013-business-email-email-server-try-now-FX103765014.aspx)
If you would rather not involve yourself with all the fuss involved with maintaining Microsoft Exchange, head over to Microsoft Office's website and Subscribe to Office 365 for Business. If you would rather not work with Microsoft at all, head over to Google
and setup Google Apps.
Thanks,
Will -
Pull POP client web to Exchange Server 2013
Hi, i am new in Microsoft Exchange Server and Email Server Administrator. At present, my company planed to have a Microsoft Exchange Server 2013 and my scope will pull data from the web-client using POP3 to the Exchange. Would you guys give me any solution
and advice for this? Thanks a ton
Sorry for my bad English.Hi,
What’s the exact mean of “pull data from the web-client using POP3 to the Exchange”? Do you mean the Outlook client connects to Exchange 2013 with POP protocol?
If that is the case, please enable and configure the POP in your Exchange server by the following article:
https://technet.microsoft.com/en-us/library/bb124934(v=exchg.150).aspx
Generally, POP3 was designed to support offline mail processing. With POP3, email messages are removed from the server and stored on the local POP3 client unless the client has been set to leave mail on the server. For more information
about POP3 in Exchange 2013, please refer to:
https://technet.microsoft.com/en-us/library/jj657728(v=exchg.150).aspx
Regards,
Winnie Liang
TechNet Community Support -
Migrate or Redirect Client Mail Server to Microsoft Exchange Server
Hi, i am new in Microsoft Exchange Server and Email Administrator. At present, my company planed to have a Microsoft Exchange Server 2013 and my scope will be redirect or migrate the webmail database to the Exchange. Would you guys give me any solution and
advice for this? Thanks a ton
Sorry for my bad English.Hello,
The steps can be like this. There are various approached available and this can be a general approach
1. Install and configure the Exchange 2013
2. Export the current mailboxes to pst
3. Create the current domains as accepted domain in Exchange
4. Change DNS and direct email traffic to Exchange server
5. Import the psts to new outlook
Regards from Visit ExchangeOnline |
Visit WindowsAdmin -
Connecting to Exchange Server 2013 using IMAP command gives authenication error
Hello All,
My application (it is a C# code) connects to Microsoft exchange server 2013 using POP3 and IMAP, processes the emails, marks as read and move to particular folder if it is processed successfully else to an different folder. In this sometimes,
I am getting authentication failed error from IMAP however same mail is processed when it is executed next time. Few times it is processed with out error. I am not sure what is causing this issue.We are connecting to IMAP using tcpIMAP command.
This is the same application which we used with exchange server 2010 now we are upgrading to exchange server 2013. I have verified that the setting of exchange 2010 and 2013 are the same.
To verify the IMAP command I created a sample application using C# which will try to connect to IMAP service and log in to exchange server 2013; it fails to authenticate the user after connecting for few times and then it starts to authenticate
successfully then again fails for few times and then authenticates. I am not sure why this is happening.
Please suggest how can I resolve this.
Thank you, SanthaSince I've upgraded to Snow Leopard I've also moved from Entourage 2008 to Mail, iCal & Addressbook with the new Exchange support.
My company exchange server is Exchange 2007.
Mail works fine except the occasional Mail crash.
iCal worked fine the first two days and then it came with an error the it cannot connect to the Exchange server and asks me to type my email address again. Doesn't work so I need to put my exchange calendar in iCal in offline. But now there is no syncing with the Echange server.
This only occurs when I add a meeting request in iCal.
My Exchange administrator has reset my mailbox on the Exchange server.
This helped for about 4 hours. Now it's the same problem.
I have a feeling the when you setup your exchange account in Mail it uses different settings for Mail and iCal with the autoconfig.
Anybody has a solution? My Exchange admin cannot find any problems on his side. Do I need to make changes on my iCal client or do we need to wait for OS 10.6.1 ? -
Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1
Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspxI think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}} -
Exchange Server 2013 setup / coexistance Exchange 2010
So started setting up Exchange 2013 and ran into a random issue regarding the OAB. Resolved by deleting/recreating the OAB in Exchange 2010.
My issue now is setup will not complete, just tells me an "Incomplete Installation Detected" starts to resume the installation. Upon "next" I receive just a hanging screen of "Setup Progress" which goes no where.
[06/12/2014 20:05:19.0860] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Starting Microsoft Exchange Server 2013 Setup
[06/12/2014 20:05:19.0876] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[06/12/2014 20:05:19.0876] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[06/12/2014 20:05:19.0876] [0] Setup version: 15.0.516.32.
[06/12/2014 20:05:19.0876] [0] Logged on user: DOMAIN\Admin.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='sourcedir', Value='F:\'.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='mode', Value='Install'.
[06/12/2014 20:05:19.0969] [0] RuntimeAssembly was started with the following command: '/sourcedir:F: /mode:Install'.
[06/12/2014 20:05:20.0344] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:21.0391] [0] Setup is choosing the domain controller to use
[06/12/2014 20:05:21.0595] [0] The MSExchangeADTopology has a persisted domain controller: DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] Setup is choosing a global catalog...
[06/12/2014 20:05:22.0516] [0] Setup has chosen the global catalog server DOMAIN CONTROLLER.
[06/12/2014 20:05:22.0516] [0] Setup will use the domain controller 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Setup will use the global catalog 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0532] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0579] [0] Setup will search for an Exchange Server object for the local machine with name 'LOCALHOST'.
[06/12/2014 20:05:22.0751] [0] Exchange Server object found : 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0751] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole
[06/12/2014 20:05:22.0751] [0] The following datacenter roles are unpacked:
[06/12/2014 20:05:22.0751] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:22.0766] [0] The local server has some Exchange files installed.
[06/12/2014 20:05:22.0798] [0] Server Name=LOCALHOST
[06/12/2014 20:05:22.0829] [0] Setup will use the path 'F:\' for installing Exchange.
[06/12/2014 20:05:22.0829] [0] Setup will discover the installed roles from server object 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0829] [0] 'BridgeheadRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'ClientAccessRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'MailboxRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'UnifiedMessagingRole' is installed on the server object.
[06/12/2014 20:05:22.0845] [0] The installation mode is set to: 'Install'.
[06/12/2014 20:05:44.0768] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[06/12/2014 20:05:44.0768] [0] Active Directory Initialization status : 'True'.
[06/12/2014 20:05:44.0768] [0] Schema Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Organization Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Domain Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] The locally installed version is 15.0.516.32.
[06/12/2014 20:05:44.0768] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
[06/12/2014 20:05:44.0830] [0] Applying default role selection state
[06/12/2014 20:05:44.0877] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:44.0877] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:44.0877] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:44.0893] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:44.0893] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:45.0737] [0] Finished loading screen IncompleteInstallationDetectedPage.
[06/12/2014 20:05:48.0518] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:48.0518] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:48.0518] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:48.0518] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:48.0518] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:48.0737] [0] Finished loading screen SetupProgressPage.Hi,
Let's try the following resolutions:
1. Check if the discovery SearchMailbox is present on Exchange 2010 when you run the Exchange 2013 Install.
2. Reinstall your Exchange 2013 server:
Open ADSIEDIT, CN=Configuration, DC=your domain ->CN=Services ->CN=Microsoft Exchange ->CN=First Organization ->CN=Administrative Groups ->Cn=Exchange Administrative Group ->CN=Servers ->CN=Server name
After remove the exchange server, please reinstall your exchange server to test the result.
Thanks,
Angela Shi
TechNet Community Support
Maybe you are looking for
-
Urgent: Doubt in coding a logic
Hi Experts, I have a doubt in coding a logic . The bussiness requirement is that i have to capture a string of alphabets and check for particular alphabet in particular position and then process the rest of the logic. the logic is given below , can a
-
Trying to Serialize Trial version of Adobe Cs6 Design Standard on Mac
Hi, We have created a Trial package of Adobe Cs6 Design Standard using AAMEE 3.1 latest version. We followed the guidelines outlined in http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html to create a Serialization file. However
-
I´m using a 10.6.4 Server with OD Accounts. The OD-Users have Intel-imacs with Mac OS X 10.5.8. If the user send the first or the second email to another user, mail doesn´t respond and the spinning wheel start to run. I then do a force quit of mail a
-
Hi for ex: Org is PK Job is PK. Pos is PK. As the req , i have to set their ViewInstance and View Attribute Property. VO is based on EO. If i press Submit Button , i want to validate these fields, for ex: Org is invalid field , but it showing System
-
I have Dreamweaver CS3 running on MacOS 10.6.2 and can't preview in Firefox 3.6. Is this known? I have looked but not found an answer. Must I upgrade to CS4? Preview works in Safari but not Firefox. Firefox does open. That is to say a Firefox windo