Microsoft Exchange Server 2013 - Windows Server 2013 Standard - When logging in user hangs on - "Applying user settings" message
Dear colleges,
Thanks in advance for viewing and suggesting!
Now for whatever reason it is the XCHG server is not responsive at all when launching ECP from the other computer on the domain. When logging in to the virtual box EXCH server is hosted on it hangs on the "Applying user settings" message for
an about an hour when finally logged in 4 or 5 XCHG services won't start... I don't remember exactly which ones - "...Mailbox Transport..." is one of them.
I read about the similar being an issue with Win 2008 R2 and EXCH server 2010, and followed the advice that I needed to add some entries to the registry - didn't help, disabling IP6 (which by the way makes no sense as XCHG needs one) - still didn't help.
Would you suggest to rebuild virtual server and reinstall EXCH all together as troubleshooting Windows issues may be lengthy?
Thanks!
Thanks folks! I think I have a clue what's going through don't know how fix it yet.
The problem is with DNS unable to resolve my main domain vwc.local. It makes some XCHG services to time out when starting. The error messages in the event log suggest about domain being unavailable
to contact.
When I tried resolving vwc.local with nslookup and ping it pinged THE OLD domain's IP address. When I setup server at home I specified this old ip address but changed it to a new one when I
moved box to the office. In the office everything worked very well - I introduced office's desktops to vwc.local, built a virtual box, introduced it the domain as well. Everything was good up until I started messing with XCHG. Now the domain is not resolvable
even though I made to be pinged to the new address by updating network adapter settings at the main server by selecting some checkboxes. But the vwc.local is still not available at VW where the XCHG is hosted on. When I open Server Manager/AD DS/AD DS
manager it gives me an error message about the DC being unavailable to contact.
How do I fix this domain mess now? Now I have 3 issues to deal with:
1. My remote desktop stopped working due to trial expiration even though I licensed server for 5 RDSCALs. This is a known issue with RDS and AD DS roles hosted on one physical box. Nobody seems
to know the step by step solution to the issue. I just got bunch of recommendations that I already followed. It looks like I need to call Microsoft and have them deal with their buggy software altogether.
2. DNS/domain issues described below. Something very weird. May I try re prepping the AD DS on the main server. I didn't try that may be I will.
3. XCHG not receiving messages from the outside.
:) Let's just focus on DNS/domain for a moment.
Thanks in advance!
Similar Messages
-
I need some clarifications.
What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center? How each them are related in collaboration system?
Is Share point server 2013 and Share pointer Designer 2013 available in 32bit version? If not, then how to use it in 32 bit machine by using any VMs?
Thanks
SenthilSharePoint Server 2013:
http://office.microsoft.com/en-us/microsoft-sharepoint-collaboration-software-FX103479517.aspx
SharePoint Designer 2013:
Designer is used to develop SharePoint pages using HTML/CSS/JS as well as SharePoint Designer Workflows
Yammer:
https://about.yammer.com/
Windows Server is Windows, but the Server OS. SharePoint runs on top of supported Windows Servers editions (see http://technet.microsoft.com/en-us/library/cc262485.aspx).
SharePoint Server is 64-bit only (trial:
http://technet.microsoft.com/en-us/evalcenter/hh973397.aspx), although Designer does have a 32-bit edition (full product:
http://www.microsoft.com/en-us/download/details.aspx?id=35491).
You will need the capability to run 64bit VMs. Minimum recommended all-in-one VM for SharePoint is to allocate 24GB of RAM, but you can get away with as little as 12GB (I wouldn't go below that). Because of this, it generally rules out 32bit OSes as a virtual
machine host.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Integrate On-Premises Exchange Server With Windows Server Essentials
I have Exchange Server 2013 installed on Win Server 2012 R2 joined to Windows Server Essentials domain. Attempting to integrate the Exchange Server into the Essentials domain from the Essentials Dashboard using the wizard fails with the error, "Cannot
locate an Exchange Server on the network. Make sure that your Exchange Server is setup and that it is connected to the network". I can communicate with the server in multiple ways from the Essentials Server and other computers on the domain. Mail
flow in and out of the Exchange Server works without issue. I can use the various management tools to administer the Exchange Server. The only task I cannot complete is integrating it into the Essentials environment which I need to do to move on
to creating user mailboxes for user accounts setup in AD.
All research to date has come up empty handed.
Help!Hi RSUL,
Any update?
On current situation, would you please let me confirm something more? It may help me to understand this issue
clearly.
Would you please let me know how join the Windows Server 2012 R2 (which had been installed Exchange Server 2013) to Windows Server Essentials domain? Did use Connector software
(type http://servername/connect)?
On server essentials, please open Dashboard and navigate to DEVICES. Then check the Status of this server which had been installed Exchange Server 2013.
Currently, the Services Integration features, including on-premises Exchange integration, are only supported in a single domain controller environment. Meanwhile, the integration
wizard must be run on a domain controller.
In addition, please refer to the following article and check if can help you.
On
Premises Exchange Integration Windows Server 2012 Essentials
Integrate an On-Premises Exchange Server
with Windows Server Essentials
By the way, please check Event Viewer and some relevant logs if you can find some more clues.
Hope this helps.
Best regards,
Justin Gu -
Backup Windows Server on Windows Server 2012
We install backup windows server on windows server 2012 standard, more when I go in tools to be able to manage it he is not there, try the Wbadmin.msc command, and returns me a message that Windows can not find the Wbadmim.msc . Have uninstalled and reinstalled
feature several times and still nothing.
I am new to the forum, so descupem me if there is another topic like this.Hi There,
Have you tried to search for "Administrative Tools" and run the "Windows Server Backup" from there?
Good Luck -
Urgent help needed to setup Forms 6i Server on Windows Server 2003
Hello,
I am trying to install Forms 6i Server from the Forms/Reports 6i Release 2 CD onto a server with Windows Server 2003 Standard Editon (services pack 1) installed.
The Oracle Installer produced the following error when I tried to install the Forms 6i Server From the Forms/Reports 6i Release 2 CD:
user1.pin(20); os_error while spawning ifsrv60 -install forms60server port=9000 mode=socket batch=yes.
Has anyone successfully installed Forms 6i Server from Forms/Reports 6i Release 2 CD onto a Windows Server 2003 server?
Any help is appreciated.
PhilYou it obtained to install the FORMS 6i SERVER in Windows 2003 ?
I am with the same problem and not yet I obtained solution. -
How to Migrate windows 2008r2 RDS server to Windows server 2012r2 RDS
Hi, I want to migrate our 2008r2 RD server + Cals to windows server 2012r2 server, the user will still connect to 2008r2 server but the server hosting the license will be migrated to a 2012r2 server. Currently I have 2 servers that users can connect
to that are served by the 2008r2 RDS (the server I'm converting is just hosting the license) the server user connect to point to this license server. How do I proceed to migrate, I'm searching for documentation but I can't find much, I found that I can only
convert to 2012r2 from 2012 or better OS, so I installing a temporary 2012 server to do a double migration seem to be the best course of action but I can't find any documentation on how to Migrate the Remote Desktop Services Role Services from 2008r2 to Windows
Server 2012.
Also I just discovered that this server is also hosting license for windows server 2003 terminal service. Will I be able to host these licences on 2012R2 ?
Any pointer would be appreciated.Hi,
It seems like migration the Remote Desktop Services Role Services from 2008r2 to Windows Server 2012 is not supported.
http://technet.microsoft.com/library/dn479239.aspx
So i think you may install and configure the RDS server on Windows Server 2012 and then migration to Windows Server 2012r2.
Hope this helps.
Regards.
Vivian Wang -
Windows Server 2008 hangs in "Applying computer settings" after installing Sharepoint 2010
Hi!
I have a server which is designated to be a Sharepoint server, I have successfully installed the server, SQL server R2 and Sharepoint 2010, but right after Sharepoint Server 2010 is installed the nex time I reboot the machine it hangs in "Applying computer
settings" I have tried reinstalling the server several times, improving the server specs.
The installations run just fine I can even see the sharepoint site, and make any configuration, the issue comes when I restart the server (for updates for example..)
Can someone help me with this issue?
Thanks in advance
Carlos R Vargas MHi,
It may take some time for configuration after the new installation. Please wait patiently. If it still hangs, please refer to the following article:
KB article 2379016
A computer that is running Windows Vista or Windows Server 2008 stops responding at the "Applying User Settings" stage of the logon process.
http://support.microsoft.com/kb/2379016
Tim Quan -
Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT
Hello there-
I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
Is there any limitation on this sense? Any documentation about it?
Thanks and appreciate your answers.
Regards,
Gustavo Ortega
Software EngineerHello,
Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
Roles needed in IIS 7.0/IIS 7.5.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
The following command can be used to set the parameter from the command prompt, please
change the directory to Windows\System32\inetserv and then execute the command.
appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
after execution of this command.
Also, are you using Maxdb to store the files or is it a "flat files" content server ?
HTH.
Steve. -
Problem instaliing sun one LDAP server on windows server 2008 r2
Hi all ,
I am trying to install Ldap server (Sun ONE Directory Server) on windows server 2008
I am using apache-tomcat-7.0.28 and java jdk1.7.0_05
I am following this manual for installing :
https://blogs.oracle.com/marginNotes/entry/installing_directory_server_enterprise_edition1
I have a problem with the cacao agent and how to install it .
I've got this error message :
c:\Program Files\Sun\dsee7\bin>dsccsetup cacao-reg
Configuring Cacao...
## Failed to run "c:/Program Files/Sun/dsee7/ext/cacao_2/bin/cacaoadm.bat" set-
aram "jdmk-home=c:/Program Files/Sun/dsee7/lib/private"
#### Cannot create service for instance: [cacao.instance.name].
#### Cannot perform firstime inialisation and configuration.
## Exit code is 1
Failed to configure Cacao.
I stuck and with no other solutions . I hope if you could to help with this issue .
i will glad to know if there is any other ways to install this specific Ldap server ,
Thanks,
AlonYou most likely skipped the step of starting the installed server prior to trying to access admin URL. Please check this document:
http://docs.sun.com/source/817-1830-10/win.html
Relevant section is:
You can start the Administration Server in either of the following ways:
# Select Start Menu -> Programs -> Sun ONE Web Server, and choose Start Web Server Administration Server.
# From the Control Panel�s Services item.
HTH... -
Installing Sun Directory Server on Windows Server 2008
Has anyone tried installing Sun Java System Directory Server in Windows Server 2008? I am trying to do this but get an error stating that nss3.dll is missing at configuration time.
Windows 2008 is not a supported platform for any DSEE release. Even if you get it working, Sun Support won't be able to help if you have issues.
This issue seems to have been reported on Windows 2000 with DSEE 6.0 too and one workaround is to remove the nss3.dll from c:\winnt\system32 or equivalent directory. Please note this workaround is not targeted at Windows 2008, so use at your own risk.
http://sunsolve.sun.com/search/document.do?assetkey=1-1-6680728-1
Winodws Native DS6.0/ISW6.0 Zip:error could not locate nss3.dll
Edited by: etst123 on Jan 29, 2009 10:39 AM
(added link to bug report) -
I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003
In the app-server-ant.xml file, as indiacted in the error message i am getting, at line 145 it is suppose to get the path to \bin\asadmin.bat from the value of a paramater called 'asadmin'. This value is being set in the beginning of the file.
The parameter value of 'asadmin' is further referring to value of another parameter called 'javaee.home' which is being set in tut-install/javaeetutorial5/examples/bp-project/build.properties
I have checked the values of both these parameters and they are set correctly, so since it is still giving me problems, at line 145 i hard coded the path instead of the parameter name:
I replaced line
<exec executable="${asadmin}" failonerror="${failonerror}" dir="${javaee.home}">
with
<exec executable="c:/sun/appserver/bin/asadmin.bat" failonerror="${failonerror}" dir="${javaee.home}">
This works. -
Problem In Data Base Creation... Oracle 10g server in windows server 2008
I have installed Oracle 10g server in windows server 2008 and the domain & active directory r created now i am trying to create the databse i am getting usual error (tns protocol adapter error ) in the 2% i have removed the domain and the active directory from windows then i created but this is not a solutions i need to create the data base in the domain server...
this is a forms forum.
please post in Database Installation -
Error when configuring Siebel Server in Windows server 2003
Hi
I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
GenericLog GenericError 1 000000024f580f64:0 2012-03-08 01:13:22 Error in transferring input values ,num of arrays incorrect 0, expected : 1
GenericLog GenericError 1 000000024f580f64:0 2012-03-08 01:13:22 TransferInputsToValues returned error:3611539 to SetControlValues
GenericLog GenericError 1 000000024f58096c:0 2012-03-08 01:13:33 NSS - ErrCode 4597527 SysErr 0
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 NSS - ErrCode 4597527 SysErr 0
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸 ֓呸 ֓㷕粃Ꞡ粈㶻粃
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸 ֓呸 ֓㷕粃Ꞡ粈㶻粃Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
Hope it helps,
Wilson -
Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS
Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
Cannot I set up Windows server 2012 R2 as primary DC and DNS , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Exchange 2013 Windows Server 2012 NLB and DAG on the same server
Hi all, I am installing Exchange 2013 infrastructure with two servers.
Both servers have the CAS and Mailbox roles.
For mounting on High Availability, will create a DAG.
Client Access I have no external Network Load Balancer.
I thought about installing the NLB servers in the DAG members, this could not be done before.
I do not know if in Windows Server 2012 and Exchange 2013
Can I install NLB on members of a DAG?
regards
Microsoft Certified IT Professional Server AdministratorHi,
I’m afraid that WNLB and DAG cannot coexist in the same server. Because WNLB is incompatible with Windows failover clustering. If we're using an Exchange 2010 DAG and we want to use WNLB, we need to have the Client Access server role and the Mailbox server
role running on separate servers.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/ff625247(v=exchg.141).aspx
Thanks,
Angela Shi
TechNet Community Support
Maybe you are looking for
-
I cloud will not use i tunes password windows 7
I have changed the password so many times but still can not use icloud on my pc hope you can help
-
Hi, I'm facing a problem, i created APD which have query data source, this query have so many calculated keyfigure and these calculated keyfigure has Exception Aggregation field is "Use Standard Aggregation" and on Calculations tab "local calculation
-
How to install JAVA API client files :: Using JAVA Proxy & NWDS
Hi I am going to integrate the SAP with one "AB" System which is providing Java API to integrate with their client ( which in turn will connect with AB System ). So AB System is providing JAR files & property files, in order to instantiate objects &
-
In iTunes, the album 'Seams
In iTunes, the album 'Seams & Stitches' is there under album, for the artist With The Punches. When I look on my iPhone 5, under With The Punches, it says unknown album. Help!
-
I am getting really fad up with not being able to do simple things with this prog...... all I want is a file to go into encore ......if I go to dynamic link to encore it gets so far then tell me encoding failed...... now I'm getting this error messag