Microsoft exchange server info

I am trying to scan to an email and it's telling me i have enter my microsoft exchange server name and i don't know where to retrieve it from, need help Thank You

If you are a non IT person, ask your IT guy to configure it on the scanner so that it doesnt prompt all the time.
If you are an IT guy, you should know your Exchange server name, although you need to make a few changes for the scanner to send emails through.
Check http://theucguy.net/allowing-application-servers-to-send/
It applies for Exchange 2010 as well.

Similar Messages

Microsoft Exchange Server 2013 Cumulative Update 7 Setup - Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error - Set-SharedConfigDC

What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:

Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support

How do I know what my Microsoft Exchange server (incoming) is?

I don't know where to check for this info (other than the IT guy), if anyone knows where I can find this online? Much appreciated.

*" How do I know what my Microsoft Exchange server (incoming) is? "*
Ask your systems/network administrators.

Problem e-mailing reports after migrating to new Microsoft Exchange server

Hi,
I am now unable to e-mail (SMTP) reports to anyone in my company because we just migrated to a new Microsoft Exchange server. Anyone know how to get rid of this message?
Status: Failed
Printer: The instance is not printed.
External Destination: Mail the instance to "____________" with a subject of " %SI_NAME% %SI_STARTTIME% ".
Data Refresh Settings: Use the server defaults.
Start Time: 8/4/09 1:00:18 PM
End Time: 8/4/09 1:01:07 PM
Server Used: gmmc-crs.reportjobserver
Error Message: server error. SMTP_E_TCPSOCKET_OPEN(2): CrystalEnterprise.Smtp
We tried changing the gmmc-crs.reportjobserver with no luck.
Thanks,

Hi,
You need to start with your exchange logs and possibly enable tracing on your BO webi/crystal/destination job servers (depending on the type of report and whether or not it is scheduled) to get an idea of how far down the line the SMTP connection is getting.
You could also confirm a few key things:
Have the SMTP destinations on your BO servers been updated with the new SMTP server info
Can you telnet to the mail server on port 25 from the BO server - if not, then check the firewall between the two servers and change the existing ruleset to allow connectivity to the new server
Possibly the old mail server didn't require authentication and the new server does, you could test this through telnet?

Which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)

Hi everyone,
Can anyone tell me which versions of Microsoft exchange server supports Exchange OLE DB Provider (ExOLEDB)? Is Exchange server 2007, 2010 and 2013 support it?
Thanks

Exchange OLE DB was removed from Exchange Server 2010 in Jan 2010. So, it is only available with Exchange
2007, 2003 and 2000. You can visit http://blogs.msdn.com/b/deva/archive/2010/01/13/update-technologies-not-available-with-exchange-2010-their-migration-reference-s.aspx
for more info.

Using iPhone with a Microsoft Exchange Server

Hi
Is it possible to connect the iphone to a Microsoft Exchange Server to access your emails?
Thanks

Ryan Simmons,
Exchange's ActiveSync protocol which requires licensing a propietary protocol from Microsoft is what you are asking for.
IMAP is one additional port open, and can be encrypted with SSL. If they are concerned about an additional port open, VPN is an option. Then only when the VPN is active will the corporate email be available. The other argument that has been advanced on security is on Windows Mobile devices the server can ask for remote wipes of data from the phone. The iPhone only caches emails, and goes back to the server to download them again when you go to view them again. If you change the password for the account on the server, the same results occur - the email is not available on the device the next time that account is accessed from the iPhone.
This article contains an outline of the things needed on the server to support:
http://docs.info.apple.com/article.html?artnum=307313
This article outlines the VPN protocols supported by the iPhone:
http://docs.info.apple.com/article.html?artnum=305723
Hope this helps,
Nathan C.

With Microsoft exchange server, leave messages UNREAD even if read on blackberry?

We are having issues that seems complicated but I'm sure there's a solution..
Sometime while at a restaurant or waiting for a light, I get a message on the blackberry but I can't fix the problem right a way or it can wait until I'm back at the office to be fixed, now when I get back to the office, I open Microsoft outlook 2003, (running off Microsoft exchange server) the message downloads into my inbox, but tagged as read.
Here is my question:
If I read a message on my blackberry, how do I leave the message unread on the exchange server? I have the MIKE (Telus) or Nextel if you prefer 8350i but I also have 9 other blackberry curve 8330 with the same problem.
Is there a way , an option leave unread on the server until downloaded to INBOX?
Any help would be appreciated.
Alain

is this via BIS or BES?
If you disable reconcile on BES you can achive what you want.
Messages Options - Email reconciliation -
wireless reconcile = no
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

I have a BlackBerry and Microsoft Exchange Server. How will I sync with my new iPad?

I have a BlackBerry that is supported by a Microsoft Exchange Server so I can sync my BlackBerry and my laptop which is a PC. How do I sync my Outlook info with my new iPad2 so all of my devices are connected? Thank you.

The setup , as was mentioned, is basically the same as a Wimndows Mobile device. You need mail server name, your domain login and credentials You will also need to check you wi-fi connection and be sure you can get rhough whatever enterprise proxy servers you might have. If you have 3g I would use that and not mess around with a proxied network, if that is an issue for you.
One additional caveat....adding another mobile device significantly increases the complexity of your mail delivery system. There are articles on the Microsoft kbase that talk about Outlook calendaring best practices. Watch for calendar consistency issues. You might consider running Outlook in online rather than cached mode, or at the minimum deleting and rebuilding your cache file.

Emails for Current Day are not sync with Microsoft Exchange server

I have bought a Z1 and configured my microsoft exchange server email on it. All is working well. However it is only showing emails till yesterday. I have tried all sync settings including automatic, all, one day and all others but still it is not showing emails for current day. I have also tried all sort options but still no improvement.
The same setting are working perfectly fine on my Samsung Galaxy Note 2. What is the issue and how to fix it? Please make sure i have purchased a new phone and would use the stock email app and no third party email app.
Already there is a downgrade in Z1 stock email app. It is not supporting formatted signatures and formatted outgoing emails. Which is now very common on all phones of its price and class.
What is Sony doing on its phones? i do not understand.
Please let me know how to fix my issue of most recent emails sync.

http://office.microsoft.com/en-us/support/set-up-email-on-an-android-phone-or-tablet-HA102823196.asp...
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Can I get more than one account on iphone microsoft exchange server

Hi all,
I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
any workaround to the one email account per iphone policy??

Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

Cannot connect to an Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service"

Dear All,
I cannot connect to my Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service".
First I would like to present my network environment, I have 4 physical servers;
The first one is holding the Domain Controller 1, IP@: 192.168.1.10
The second server is holding the additional Domain Controller which it is DC2, IP@: 192.168.1.11
The third server is holding the Exchange 2013 Mailbox, IP@: 192.168.1.15
And the last server is holding the Exchange 2013 CAS-HT, IP@: 192.168.1.16
I am doing the steps below:
1-Creating a new profile in outlook and start configuring the exchange account by entering the IP address of the Exchange-CAS Server, 192.168.1.16
2-entering the account name: [email protected]
3-Go to "More Settings" > "Connection" > "Connect to Microsoft Exchange using HTTP" > and entering the "Exchange Proxy Settings"
4-type the exchange CAS Server URL, https://192.168.1.16
5-Check the "Connect using SSL Only"
6-Authentication Settings: "NTLM Authentication", and pressing Apply
7-When I press the "Check Name" button, a message occurred> "The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action".
8-I go back to the "Exchange Proxy Settings" and I Uncheck the "Connect using SSL Only" and pressing Apply
9-i press the "Check Name" Button, a small window occurred to enter a Username and Password, so I enter the Administrator username and the administrator password and pressing "OK", but nothing is changed, I tried to enter my
username and password in the small window and I still got the same result.
I cannot verify the account name and I cannot complete the process.
I appreciate you kind assistance.

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Try to login the test account through OWA.
2. Check the Autodiscover settings: get-clientaccessserver |fl autodiscoverserviceinternaluri
3. Check the result of directly accessing the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Thanks,
Angela
Angela Shi
TechNet Community Support

Microsoft Exchange Server 2003 and Windows 8 Compatibility

Is there a fix or workaround for accessing email via Outlook 2013 (Windows 8) when your company uses Microsoft exchange server 2003 and has not plans on upgrading it any time soon. I am a remote employee so I am the only one that has this problem in the
company. I can access email through an owa account but it's a pain. I tried to set up a rule to have all incoming mail forwarded to my gmail account in Outlook 2013, but that did not work. Any other ideas?

If server has enabled ActiveSync you can use Windows 8 Mail Client - works almost like Outlook.
AFAIR Outlook 2013 can't work with Exchange 2003.
Regards, Konrad Sagala, MCT, MCSE+M, MCITP: Exchange 2007/2010, Lync 2010, Office365, Windows 2008, Virtualization

SAP PI Connection Microsoft Exchange Server (Scenario Mail -- SAP PI -- File)

Hi experts,
we want to connect Microsoft Exchange Server to SAP PI. POP3 and IMAP4 is not allowed on mail server side.
But the standard mail adapter in SAP PI (configured as sender communication channel) only works with POP3 and IMAP4.
Can anyone help me to solve this problem
Thank you for your help.
Mario

Hi Priyadshini,
The way that you have developed your java program can be different that the way that SAP did it. With pop3 in PI, as far as i know, it is no possible to change the read/delete properties that the mail server has by default, as Amit and Ilya mentioned you should try with the imap solution or to talk to the mail server administrators.
Are you sure that the messages is being deleted?, have you checked other mail folders in the user account?, may be the message is being moved.
Regards.

Syncing ACT contacts while on automatic wireless syncing with Microsoft Exchange Server?

Does anyone know if this is possible? At the moment, my company is automatically performing a wireless sync between Outlook contacts and their Blackberry Curve 8330 devices. However, employees that travel also need their ACT contacts on their phone. I've researched CompanionLink and know that I can get the ACT contacts directly onto the Blackberry that way, but, the problem arises where the ACT contacts will end up syncing back to the Exchange server -- which we don't want. We want to keep the automatic syncing with Outlook, but periodically we want to do a one-way ACT transfer onto our Blackberries, without having those extra (approximately 5,000) contacts go back into Outlook. Is there an easy way to categorize/separate Outlook and ACT? Any ideas or workarounds?

flashman181 wrote:
I am trying to sync my Outlook 2007 with my palm Treo Pro but keep getting the same error - server could not be reached Error code
80072ee2. This is probably a basic question but the server you enter into the Microsoft Exchange settings in active sync is the mail server you have in Outlook 2007? eg mail.internode.on.net. I don't need to do anything to outlook 2007 to "activate" Microsoft Exchange.
I'm looking at the Internode setup guides and it looks as though you have a POP server. In that case, if you want to sync directly to the server, you would want to set it up for POP/SMTP rather than for Microsoft Exchange Server. Does that help?
If you do not want to sync over the air and instead want to sync only by USB/Bluetooth to your PC, I think that works quite differently. I don't have any experience with that.
(Edit: Changed link style so it was more obvious.)
Message Edited by Jeffro on 05-27-2009 07:05 PM

Mail bouncing from the Microsoft Exchange Server.

Hi All,
This is Brajesh from Mobinius Technologies. When ever we are sending mails to our client those who are using Microsoft exchange server. Our mail are getting rejected as spam content . How to resolve this
issue. Please help us.

Hi,
According to your description, I understand that failed to send message to recipient and rejected as a spam.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account or some special account contain this domain experience this question, how about internal and external mail flow?
If this issue only occur on some special recipient, it indicate that target domain may be configured to reject your message, I recommend to contact its administrator to change the setting.
Otherwise, please try to enable protocol log to get more details about this issue. More details about Protocol logging, for your reference:
https://technet.microsoft.com/en-us/library/aa997624(v=exchg.150).aspx
Best Regards,
Allen Wang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Microsoft exchange server info

Similar Messages

Maybe you are looking for