Microsoft Forefront Login

Hello All,
I've done a little digging and it appears that Forefront Online Protection for Exchange (FOPE) has now been merged/replaced into the Exchange Admin Center (EAC) within Office 365 last year
Because of this the original URL no longer works: https://sts.messaging.microsoft.com/login.aspx
I've been reading from this white paper that you must browse to this webpage and login:  https://admin.protection.outlook.com/ecp/
White Paper: https://technet.microsoft.com/en-us/library/jj723141(v=exchg.150).aspx
Login attempts fail with my existing administrative username/password. It's almost as if its been migrated to office 365 but no credentials have been supplied to us?
How or what is the easiest solution to resolve this?
Many Thanks

Hi,
Please have a look at the similar thread.
Can't access FOPE admin portal
http://community.office365.com/en-us/f/158/t/66138.aspx
If you have any other question, you could get better support from Forefront Online Protection for Exchange.
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FOPE
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • IPad 2 looses username and password with Microsoft Forefront TMG

    My company uses Microsoft Forefront TMG as a proxy on our Guest wireless access.  We have a guest username and password that changes every few weeks that iPads can use to access the internet at work - we are not allowed into the company network!  Although I can put the guest username and password into the authentication dialog, the username and password are lost after the iPad has been off for several minutes and I have to reenter them.  In the before iOS 5.0 versions I was able to set the wireless to automatically remember the password and to auto-fill the username and password each time.  Now, the username and password that come up were from the pre-iOS 5.0 settings - it doesn't remember the new username and password from the last time that I logged in.  This occurs with any App that attempts to log in after I turn the iPad on.  The same issue comes up with other iPads here as well.  Settings are: Auto-Join and Auto-Login set, HTTP Proxy Off.  IP address received from DHCP.
    Is there any setting that I can use to get around this problem?
    LW

    The Apps worked when I originally got it (several days ago), and I could also log onto the websites.
    Could it be my wireless router? I did notice that when my macbook pro is asleep, and I open it up to awake it, it sometimes disconnects my wifi signal (everything connected to my signal will lose it) for about 20 seconds, and then it will come back to.
    Not sure if that is connected to my problem with logging into websites and apps, but I'll just put that info out there.

  • Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically

    Hello,
    I am having an issue when I start my TMG 2010 machine:
    (*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
    The service "Microsoft Forefront Server Protection for Exchange Registration Service"
    does not start, it is set to "Manual".
    I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
    Thanks in advance.
    Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

    Hi,
    Have you received any errors in event logs when
    you started the Microsoft Forefront Server Protection for Exchange Registration Service?
    Based on my research,
    Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
    Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
    The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
    down and does not need to be running for transport scanning to occur.
    You can refer to the link below:
    Services
    Best regards,
    Susie

  • Cannot save any changes - Microsoft Forefront 2010 for exchange is unable to perform the requested function

    HI, I have Forefront 2010 for Exchange installed for an Exchange 2007 SP2 running on Windows 2003 x64 SP2. Exchange has all roles installed on the same server. 
    When I try to save any change on Forefront I got the following message:
    Microsoft Forefront 2010 for Exchange is unable to perform the requested function. This may be because Forefront services are unavailable. Ensure that all Microsoft Forefront services are running and that WindowsPower Shell is functional
    Well, our FF services are running and PowerShell is functional. I checked some forums and found some problems when there is entries in the IP Allow / Block lists in Exchange UI. I removed those entries but problem remains.
    Any ideas would be appreciated.
    Xavier Villafuerte

    In my case, I was able to work around this issue by using  PowerShell directly.  For example, to run an on-demand scan for all mailboxes, this worked:
    #open EMS
    $aliases = (get-mailbox -result unlimited).alias
    Add-PsSnapin FSSPSSnapin
    set-FseOnDemandScan -MailboxList $aliases
    Start-FseOnDemandScan -EnableVirusScan $true
    Windows 2008 R2 SP1
    Exchange 2010 SP3, RU9
    PowerShell 4.0 present on the machine (though EMS runs PS 2.0)
    Forefront PowerShell cmdlets:
    https://technet.microsoft.com/en-us/library/cc482986.aspx
    Mike Crowley | MVP
    My Blog --
    Baseline Technologies

  • If the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

    if the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

    thanks for your reply!
      what's protection software can use for exchange server 2013?
    Hi,
    Most (if not all) of the bigger vendors has a product that supports Exchange 2013, so look them up.
    Exchange 2013 has some Anti-Spam and Anti-Malware Protection functionality that you can read about here:
    http://technet.microsoft.com/en-us/library/jj150481(v=exchg.150).aspx
    Martina Miskovic

  • Microsoft Forefront Protection 2010 for Exchange Server - where to look in GUI

    Hi there!
    We have configured Forefront for Exchange on Edge server.
    We have created a test subject filter and sent a test mail.
    On the Administrator Console under dashboards we see that message was blocked due to spam, but we cannot find in GUI some briefer details regarding this blocked message.
    How can we see in this administration console GUI which exactly message has been blocked?
    Having just dashboards and not being able to open and check every blocked message is a problem.
    Please advice
    With best regards
    bostjanc

    I posted a PowerShell-based workaround in the other thread:
    https://social.technet.microsoft.com/Forums/forefront/en-US/1ccb9a5e-4b08-4f6b-a4bd-32cf5f2cd2b0/cannot-save-any-changes-microsoft-forefront-2010-for-exchange-is-unable-to-perform-the-requested?forum=FSENext
    Mike Crowley | MVP
    My Blog --
    Baseline Technologies

  • Microsoft forefront protection 2010 for exchange server is unable to perform the requested function

    I get the following error any time I try and change any setting:
    Microsoft Forefront Protection 2010 for Exchange Server is unable to perform the requested function. This may be becuase Microsoft ForeFront services are unavailable. Ensure that all Microsoft ForeFront services are running and that Windows Powershell is
    functional.
    I have installed the latest rollup for SEP. Rollup 5 I think. I have rebooted the server. I have checked the permissions and they are correct.
    Any thoughts?

    I posted a PowerShell-based workaround in the other thread:
    https://social.technet.microsoft.com/Forums/forefront/en-US/1ccb9a5e-4b08-4f6b-a4bd-32cf5f2cd2b0/cannot-save-any-changes-microsoft-forefront-2010-for-exchange-is-unable-to-perform-the-requested?forum=FSENext
    Mike Crowley | MVP
    My Blog --
    Baseline Technologies

  • Spam notification on Microsoft Forefront Protection 2010 for Exchange Server

    Hello
    I'm using Microsoft Forefront Protection 2010 for Exchange Server on edge Exchange2010 SP2.
    I did know I can't configure any notification for detected spam, because the result would be that the users inbox would be spammed with Forefront notifications instead of the real spam.
    http://social.technet.microsoft.com/Forums/forefront/en-US/6c293ded-8e61-44a1-ac25-bb685ecd1c7c/notification-spam-forefront-for-exchange-2010
    But I can't find the Forefront notifications in tracking logs.
    Is it usual ?
    if not, why the Forefront notifications was't send?
    Thanks for any ideas.
    Hiroko

    Hi,
    I checked smtp log of our Exchange server.
    But I think I can't search the logs.
    Could you please tell me the word of error on smtp
    log.
    Thanks for any ideas.
    Hiroko

  • Itunes 10.4 and Microsoft Forefront UAG Endpoint on Win XP conflict

    Seems that when I loaded microsoft forefront UAG endpoint on my Win XP computer, itunes 10.4 stopped recognizing my iP3 and iP4. Took MS Forefront UAG endpoint  off and voila, itunes again recognized the phones.  Funny, I havea 2nd gen nano and it was not affected. There is little online about this conflict but after hours of trying all kinds of fixed, removing MS Forefront worked. Hope this helps someone else.

    Thanks for the link. I noticed that "Swut" from Orange County, Ca (see the post below) had a reply in the link you gave me referring to "Vipre" , which is an Anti-Virus program that I also use, like "Swut".
    I will investigate this further. In defense of Apple, there is no way that they can test against every bit of software that we run on these PCs. I would hope that if we find out that there is some problem with the Vipre interface, both Apple and the Vipre people will be made aware of the problem.
    Before I try the iTunes 10.2.1 upgrade again, I'll contact Sunbelt Software- the people who make Vipre and see if they have heard of this problem. I'll let all of you know what the results are.
    Thanks- Richard Van Nostrand
    "From Swut
    From: Orange County, CA
    Registered: Jan 28, 2008
    Re: iTunes 10.1.0.56 update kills network interface - Windows 7
    Posted: Dec 12, 2010 2:32 AM in response to: TG10987
    I didn't have to go all the way through with TRG10987s solution. When I got to step 4 I noticed that VIPRE had installed multiple virtual network adapters on to of the network adapters. I uninstalled VIPRE thereby deleting the virtual adapters ran the upgrade, and reinstalled VIPRE. Everything works fine now.
    Thanks to TG10987, who put me on the path."

  • Expiration of "Subscription license of Microsoft Forefront Protection for Exchange Server"

    We have "Microsoft Forefront Protection for Exchange
    Server" running in the company. Now I face the expiration of "Subscription license of Microsoft Forefront Protection for Exchange Server".
    I learned from
    http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx that "... products will continue to be supported through that date (12/31/2015) in order to provide with customers sufficient
    time to move to alternative solutions". My concern is, that Microsoft Forefront Protection for Exchange Server does not know about that grace period.
    It claims:
    Your Subscription license of Microsoft Forefront Protection for Exchange Server has expired. The product will continue to operate during the extended grace period
    until 5/1/2013. Subsequently, scanner updates will be disabled and the product will operate with reduced functionality.
    Is there a way to get a new license number? I called our software vendor, but Microsoft does not sell licenses anymore.
    Thank you for your assistance.

    Hi
       We just talk about exchange deployment and configuration in this forum.
       If you have any questions about licensing, please use the contact information in
    here which would be the best place for seeking the answer.
    Terence Yu
    TechNet Community Support

  • Problem starting Microsoft Forefront Server Protection Eventing Service?

    Hi Guys,
    Our Exchange 2007 Microsoft Exchange Information Store and Microsoft Exchange Transport services wont start. All dependencies have started except Microsoft Forefront Server Protection Eventing Service. We tried starting it manually but we got this message
    (see attached). Any idea how to fix this? Since we cant start Microsoft Exchange Information Store and Microsoft Exchange Transport services, OWA users cant access their emails. Please advise.
    Thanks,
    Arnel

    Hi Arnel,
    Based on your description, I understand that the Microsoft Forefront Server Protection Eventing Service can’t
    be started.
    Please run
    services.msc, select the Microsoft Forefront Server Protection Eventing Service and double-click to open it. In the service properties show box, please select Dependencies tab to check which service that it depends on didn’t start.
    Meanwhile, would you please let me know which version of the
    Forefront for Exchange Server? Please check if you have installed the latest updates to Forefront for Exchange Server. (Such as:
    Hotfix Rollup 3 for Microsoft Forefront Protection for Exchange and so on.)
    By the way, this issue seems to be more related to Forefront for Exchange Server. Please post it in the Forefront
    for Exchange Server forum. I believe we will get a better assistance there.
    https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FSENext
    Hope this helps.
    Best regards,
    Justin Gu

  • Microsoft Forefront Server Protection Eventing Service won't start?

    Hi Guys,
    When Forefront Protection for Exchange was integrated/enabled on our SBS 2008 server, Microsoft Forefront Server Protection Eventing Service won’t start. Even when we try to start it manually we are getting this message (see attached). During this attempt,
    we got these events in the event viewer. In this case, in order to have our email working, we have to temporarily disable Forefront. Any suggestion how to fix this? Please advise.
    Event 465
    Source: ESENT
    FSCEventing (9324) Corruption was detected during soft recovery in logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log. The failing checksum record is located at position END. Data not matching the log-file
    fill pattern first appeared in sector 450 (0x000001C2). This logfile has been damaged and is unusable.
    Event 301
    Source: ESENT
    FSCEventing (9324) The database engine has begun replaying logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log.
    Event 454
    Source: ESENT
    FSCEventing (9324) Database recovery/restore failed with unexpected error - 501.
    Event 1076
    Source: FSCEventing
    The Forefront Protection Eventing Service has stopped.
    Thank you very much!
    Arnel

    Hi Arnel,
    Based on error messages, it indicates a log file (inc.log) has become corrupted. Please restore the log file
    from a backup copy, and then check if this issue can be solved. For more details, please refer to the following article.
    Event Id 465
    Hope this helps.
    Best regards,
    Justin Gu

  • Sequencing Microsoft Forefront UAG Internet Explorer Addon

    Hello,
    I am trying to sequence the Microsoft Forefront UAG components to allow a remote access site to work.
    I am using App-v 4.6, IE 10 and a Windows 2008 R2 sequencer.
    I am sequencing as a plugin and pointing to the locally installed version of IE, then creating a shortcut to the website.
    However, when i publish the package, the addon doesnt appear in the manage addons IE list, and the site still prompts to install it..
    Does anyone have any advice please?
    Thanks,
    Fiona

    Can you verify if your IE really runs inside the virtual environment (application is shown as 'in use' in the client management console or you can access the asset folder on the virtual drive (like Q:) from an file-open (Ctrl-o) dialog of that IE?
    Falko
    Twitter
    @kirk_tn   |   Blog
    kirxblog   |   Web
    kirx.org   |   Fireside
    appvbook.com

  • SAP IDM vs Microsoft Forefront Client(FIM)

    Hi experts,
    Actually my companyBig Company) is planning to implement tool for Identity Management but there are couple of options which we are thinking of considering particularly the last  2 options are SAP IDM and Microsoft Forefront(FIM) ... But I am not able to enough information or comparision points that will help me in convincing to my sr management to finally say to one of these tool.
    I would really appreciate a quick response, if some one can explain the comparisions points among these 2 tools.
    Thanks
    SAP_Enthu

    Hi All ,
    Just to add to my previous question as currently we have MS Active Directory already and as per plan implementing SAP in almost all areas entreprise wide with GRC. So with this background , I will appreciate the advantages and disadvantages of SAP IDM 7.1(might use 7.2 if it comes within next 3 months as planned) with MS Forefront IDM(FIM 2010) in terms of Technical , functionally , architecture ,economic point of view.
    This will help in selecting the best tool among them.
    Thanks
    SAP_Enthu

  • Microsoft Forefront Protection encountered an error with event ID 6020 while performing a scan engine update.

    HI
    we have a error in the health status of our FPE 2010 console and we have below error
    event id 6020
     Microsoft Forefront Protection encountered an error while performing a scan engine update.
       Scan Engine: Cloudmark
       Update Path: http://forefrontdl.microsoft.com/server/scanengineupdate
       Error Detail: An error occurred while processing the universal manifest.
    Able to telnet the below and even Content Filter is enabled.
    telnet cdn-microupdates.cloudmark.com 80
    telnet lvc.cloudmark.com 443

    HI
    we have a error in the health status of our FPE 2010 console and we have below error
    event id 6020
     Microsoft Forefront Protection encountered an error while performing a scan engine update.
       Scan Engine: Cloudmark
       Update Path: http://forefrontdl.microsoft.com/server/scanengineupdate
       Error Detail: An error occurred while processing the universal manifest.
    Able to telnet the below and even Content Filter is enabled.
    telnet cdn-microupdates.cloudmark.com 80
    telnet lvc.cloudmark.com 443
    Ours has also started reporting failed updates since about 2AM GMT this morning on both of our Edge servers.
    Jeff

Maybe you are looking for