Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically

Hello,
I am having an issue when I start my TMG 2010 machine:
(*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
The service "Microsoft Forefront Server Protection for Exchange Registration Service"
does not start, it is set to "Manual".
I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
Thanks in advance.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

Hi,
Have you received any errors in event logs when
you started the Microsoft Forefront Server Protection for Exchange Registration Service?
Based on my research,
Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
down and does not need to be running for transport scanning to occur.
You can refer to the link below:
Services
Best regards,
Susie

Similar Messages

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

Windows Service does not start automatically

Hi
I have a .NET 4.5 C# windows service, StartType set to automatic. It is running fine in server.
Few days ago, my server has windows update, including security update for .NET framework 4.5.1. Server auto restarted.
However, my service is not started.
By referring to eventlog, it shown as below sequence
1. Explorer initiated restart - Shutdown type - restart
2. Sql Server Service is stopped successully
3. My Service is stopped successully
-- Server restarted
4. Sql Server Service is in running state
5. My Service is stopped successully
Question is, why my service is stopped instead of running/started? I checked event log and my app log, no error at all.
Any ideas?
Thank you

I was thinking to set "SQL Server", but I am not sure what is the service name for the SQL service name.
Anyway to specify like "SQL Server *" ?
thank you
The default instance service name is MSSQLSERVER, and MSSQL$[name] for a named instance. If you're not sure what the instance is, you could check the services.msc or the registry value in this registry hive:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\InstalledInstances
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows listener +service does not start automatically eventhough Automatic

Hi
When I restart the database server, the listener is not starting automatically , so as the service.
Both are set to start automatically.
This was working before and all of a sudden, this problem appeared.
I dont remember changing any setting on the database side but on windows server side, not sure if anything is changed.
The error we received:
============
The OracleServiceGEOOAP service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
The OracleOraDb11g_home1TNSListener service failed to start due to the following error: %%1053 Service error on GEPGPO01-V
alert log
=======
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 11-MAR-2011 15:44:26
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
listener.log
========
Fri Mar 11 15:44:23 2011
11-MAR-2011 15:44:23 * service_update * geop * 0
11-MAR-2011 15:44:29 * service_died * geooap * 12547
TNS-12547: TNS:lost contact
11-MAR-2011 15:44:30 * service_died * geop * 12547
TNS-12547: TNS:lost contact
Fri Mar 11 15:44:37 2011
11-MAR-2011 15:44:37 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65288)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
11-MAR-2011 15:44:41 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65289)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
11-MAR-2011 15:44:43 * (CONNECT_DATA=(SID=GEOOAP)(CID=(PROGRAM=C:\Program Files\Quest Software\Toad for Oracle\toad.exe)(HOST=D00661)(USER=app_nathv))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.4.136.230)(PORT=65290)) * establish * GEOOAP * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
Fri Mar 11 15:53:46 2011
So now we have to manually restart the listener and service , for the database to be opened. Is it possible to give direction what areas need to check, to solve this issue?
Thanks.

Hi Krithi,
Can you confirm my understanding here:
* Since a short time the automatic startup of the listener and Oracle instance fail.
* You can manually startup the listener and database instance without any problem, and then all runs as expected
so far so good?
What's your procedure to start the listener and DB instances?
Are you performing the startups with your own user account, or SYSTEM, or a dedicated Oracle account?
Are the windows services running under SYSTEM, a dedicated Oracle user....??
Could it be that the system administrator installed something (like a new Oracle client) which would have changed some settings?
Can you compare the environment variables (ORACLE_HOME, ORACLE_SID, PATH) between the account YOU use for manual startup and those for the user account used to (auto)start the services?
Maybe you can try to plan a reboot after you have set the problematic services to run under your profile?
Well.... a few points to investigate if not yet considered.
HTH,
Thierry

"Reporting services" service does not start automatically

I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log:
1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect.
2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
If i select "start" from service's context menu then it starting normally and it's state becomes Running.
What can i do to make reporting services starting automatically on system load?

i have the same problem here in one of our servers ,, it was working and suddenly it stopped i don't know why
when i reviewed the Event Viewer :
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 8/22/2010
Time: 12:05:26 PM
User: N/A
Computer: SERVICE-CENTER
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. ---> System.UnauthorizedAccessException:
Access to the path 'C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer\RSReportServer.config' is denied.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at Microsoft.ReportingServices.Diagnostics.Globals.SafeOpenXmlDocumentFile(XmlDocument doc, String pathToXmlFile)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.LoadDocument()
   at Microsoft.ReportingServices.Diagnostics.R...
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any body can help with this ,, because i didn't find anything helpful till now !!!
dear all
i installed SQL Server 2005 SP2 and it solved my problem
wish you all luck

Help Required...Web Service does not start automatically...

I have a web service created with a EJB, everything is fine now.
After restarting the Server, web service doesn't get start automatically.
I have done the changes for the EJB - .ear project - application-j2ee-engine.xml file with the below.
<start-up mode="always"/>
But it still doesnt start. any help is appreciated.
This is the document i have referred.
http://help.sap.com/saphelp_nw04s/helpdata/en/25/0c08f3981343609d4045f8acaa0a76/frameset.htm
Thanks,
Sridhar
Edited by: Sridhar k on Jan 5, 2009 9:11 AM

Hai,
Just a tought...:-|
Check the value in your file, is it typing mistake or you have entered the same in your file.
<start-up mode="always"/> it should be <start-up mode="always">.
Regards,
Yoganand.V

Windows listener service will not start automatically

I just installed 11.2.0.3 Standard Edition One and when I reboot the server, the listener service is not started. The service is set to start Automatically. I have to login, open services and then push start.
The oraceServiceSId does start automatically,
The listerner service does not start automatically,
The dbconsole service does not start automatically,
The processManger1 service (from middleware) does not start automatically
This is Windows 7 64 bit.
Any ideas?
Edited by: brian.mcginity on Dec 10, 2011 11:25 AM

I found where the services logs are recorded in the event viewer. Funny thing just happened, I was just about to do another reboot so I could check the logs when I noticed there were window updates in q.
So after running the updates, the os requested to reboot . For the first time, the services started automatically.
These are the updates which fixes the probem:
Security Update for Windows 7 for x64-based Systems (KB2639417)
Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2618444)
Security Update for Windows 7 for x64-based Systems (KB2620712)
Cumulative Security Update for ActiveX Killbits for Windows 7 for x64-based Systems (KB2618451)
Edited by: brian.mcginity on Dec 13, 2011 9:52 PM
Edited by: brian.mcginity on Dec 13, 2011 9:53 PM

Problem starting Microsoft Forefront Server Protection Eventing Service?

Hi Guys,
Our Exchange 2007 Microsoft Exchange Information Store and Microsoft Exchange Transport services wont start. All dependencies have started except Microsoft Forefront Server Protection Eventing Service. We tried starting it manually but we got this message
(see attached). Any idea how to fix this? Since we cant start Microsoft Exchange Information Store and Microsoft Exchange Transport services, OWA users cant access their emails. Please advise.
Thanks,
Arnel

Hi Arnel,
Based on your description, I understand that the Microsoft Forefront Server Protection Eventing Service can’t
be started.
Please run
services.msc, select the Microsoft Forefront Server Protection Eventing Service and double-click to open it. In the service properties show box, please select Dependencies tab to check which service that it depends on didn’t start.
Meanwhile, would you please let me know which version of the
Forefront for Exchange Server? Please check if you have installed the latest updates to Forefront for Exchange Server. (Such as:
Hotfix Rollup 3 for Microsoft Forefront Protection for Exchange and so on.)
By the way, this issue seems to be more related to Forefront for Exchange Server. Please post it in the Forefront
for Exchange Server forum. I believe we will get a better assistance there.
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FSENext
Hope this helps.
Best regards,
Justin Gu

Microsoft Forefront Server Protection Eventing Service won't start?

Hi Guys,
When Forefront Protection for Exchange was integrated/enabled on our SBS 2008 server, Microsoft Forefront Server Protection Eventing Service won’t start. Even when we try to start it manually we are getting this message (see attached). During this attempt,
we got these events in the event viewer. In this case, in order to have our email working, we have to temporarily disable Forefront. Any suggestion how to fix this? Please advise.
Event 465
Source: ESENT
FSCEventing (9324) Corruption was detected during soft recovery in logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log. The failing checksum record is located at position END. Data not matching the log-file
fill pattern first appeared in sector 450 (0x000001C2). This logfile has been damaged and is unusable.
Event 301
Source: ESENT
FSCEventing (9324) The database engine has begun replaying logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log.
Event 454
Source: ESENT
FSCEventing (9324) Database recovery/restore failed with unexpected error - 501.
Event 1076
Source: FSCEventing
The Forefront Protection Eventing Service has stopped.
Thank you very much!
Arnel

Hi Arnel,
Based on error messages, it indicates a log file (inc.log) has become corrupted. Please restore the log file
from a backup copy, and then check if this issue can be solved. For more details, please refer to the following article.
Event Id 465
Hope this helps.
Best regards,
Justin Gu

Exchange Transport Service is not starting

Hi,
We stopped our exchange server machines. When we started it again Exchange Transport service is not starting. Can anyone help us in this regard?

Hi AneesurRehman,
Thank you for your question.
We could restart the service of “Microsoft Exchange AD topology ”,then manually start the Exchange Transport Service, if not, check if there are other Exchange services which were not started, we could start other Exchange service before we start Exchange
Transport Service.
If we didn’t start any Exchange service, we could check if there are any Event IDs in Application Log. I suggest we post Event Id to
[email protected] for our troubleshooting.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

JMS Internal Error at Server Client Adapter!JMS Service is not started

Hi
Can any one tell me how to trouble shoot for following errors:
Failed to Create Connection! Reason: Response from the server could not be reached.
JMS Internal Error at Server Client Adapter!JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310
We are trying to send the request from SONICMQ JMS to R/3 and trying to post the response to Sonic Queue. but we are facing some problems for JMS adapter .
but in JMS sender and receiver adapter i gave different IP and port for listen the SONIC queue. why it is showing in different IP here? this message got from logviewer.
regards
Rambarki...

Rambarki,
What is the error displayed on the Adapter Monitoring pages?
Generally the correct error descriptions for connectivity issues are found on adapter monitoring UI than any other.
Other possible reasons could be :
<i>JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310</i> This might be issue with your network settings i.e. XI server is unable to reach the specified IP on specified port.
Regards,
Amol

PIA service does not start

Hi,
my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
Do you have any idea for that ?
In windows Evenetlog it says Event Type: Warning
Event Source: beasvc
Description:
peoplesoft-PIA service stopped
Thank for help.

after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
bea logs are under bea DIR.
Thnks!

Opmn service does not start when try to start Oracle BI Services

Hi ,
I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
Any Idea how to fix this one.
Thanks

Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

W2k8R2sp1::Eventlog service does not start::cause: JavaWS service does not start

Windows Web Server W2k8R2sp1 Problem
Eventlog service does not start
- Cause: Java Web Start does not start
-- Cause: Had a virus in "C:\Program Files (x86)\Java\jre1.6.0_03\bin\javaws.exe"
(AVG removed file. Re-installed java in: S:\Java\re1.8.0_31
In registry: file-paths seem to be okay (regedit find: javaws, Java Web Start)
Can't find a solution on-line.
What to do?
It is a dedicated production server managed by remote desktop (Leaseweb.com, ip: [37.48.64.130])
Any help will be highly appreciated.
Thanx in advance,
Dick

Hi Vivian,
Rebooted several times
The point is the event-viewer is not working. Because the eventlog-process is not running/starting. Because JavaWS-process isn't starting
Registry: http://niceware.com/zen/All_registry_20015-03-25_reg.txt
Processes: http://niceware.com/zen/services-2015-03-25_csv.txt
This is some info by SC.EXE:
=========================
CMD in elevated mode:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sc queryex eventlog
SERVICE_NAME: eventlog
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 1068 (0x42c)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
C:\Windows\system32>sc queryex javaws
SERVICE_NAME: javaws
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
C:\Windows\system32>sc start javaws
[SC] StartService FAILED 1053:
The service did not respond to the start or control request in a timely fashion.
========
C:\Windows\system32>sc start eventlog
[SC] StartService FAILED 1068:
The dependency service or group failed to start.
========
C:\Windows\system32>sc qc javaws
[SC] QueryServiceConfig SUCCESS
SERVICE_NAME: javaws
TYPE : 10 WIN32_OWN_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 0 IGNORE
BINARY_PATH_NAME : S:\Java\re1.8.0_31\bin\javaws.exe
LOAD_ORDER_GROUP :
TAG : 0
DISPLAY_NAME : Java Web Start
DEPENDENCIES :
SERVICE_START_NAME : LocalSystem
C:\Windows\system32>sc qc eventlog
[SC] QueryServiceConfig SUCCESS
SERVICE_NAME: eventlog
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
LOAD_ORDER_GROUP : Event Log
TAG : 0
DISPLAY_NAME : Windows Event Log
DEPENDENCIES : javaws
SERVICE_START_NAME : NT AUTHORITY\LocalService
C:\Windows\system32>

Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically

Similar Messages

Maybe you are looking for