Microsoft Issues Fix for Bug in Malware Protection Engine
Microsoft has issued an update to its core malware protection engine that fixes a bug that could allow an attacker to gain LocalSystem privileges on a vulnerable machine if a specific set of odd conditions exist.
The vulnerability in the Microsoft Malware Protection Engine is a privilege-escalation bug, so an attacker would already need to be authenticated on the local system in order to exploit it, the company said.
Continued here: https://threatpost.com/en_us/blogs/microsoft-issues-fix-bug-malware-protection-engine-022411
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer
You can export the management pack via powershell. That will "unseal" the MP. You can then go hack around in it and fix what you want, then reseal it. The only issue is that you will have to Delete the one that is in your management group
before you import this hacked one and if there are any updates to this MP in the future, you will not be able to import the updated one without deleting the one you hacked. Also, hacking a sealed mp and re importing it with your changes, might break
any support contracts you have with MSFT.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.
Similar Messages
-
[svn] 2147: fix for bug SDK-14871:
Revision: 2147
Author: [email protected]
Date: 2008-06-19 09:12:19 -0700 (Thu, 19 Jun 2008)
Log Message:
fix for bug SDK-14871:
A few cases dealing with arrays of registered strongly typed AS objects run into this issue.
QA: please verify
Doc: n/a
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-14871
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/rpc/src/mx/rpc/xml/XMLDecoder.as -
[svn] 2145: fix for Bug SDK-14927:
Revision: 2145
Author: [email protected]
Date: 2008-06-19 08:52:01 -0700 (Thu, 19 Jun 2008)
Log Message:
fix for Bug SDK-14927:
An empty SOAP-encoded array was being decoded incorrectly as an array with one (null) element.
QA: regressions run fine, but we should double-check that we are covering all similar edge cases
Doc: n/a
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-14927
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/rpc/src/mx/rpc/soap/types/SOAPArrayType.as -
Revision: 5537
Author: [email protected]
Date: 2009-03-24 20:16:43 -0700 (Tue, 24 Mar 2009)
Log Message:
Fix for bug with FxRotate3D that Thermo ran into with our i11 build. The problem was that we were sometimes setting offsets values to NaN due to bad initialization, and that we were also incorrectly calculating the transform center when offsets had not yet been initialized on the target.
QE Notes: None
Doc Notes: None
Bugs: SDK-20209
Reviewer: Ely
tests: checkintests, mustella mx/effects
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20209
Modified Paths:
flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/effects/FxAnimate3D.as
flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/AdvancedLayoutFeatures.asWe experience it as soon as we enable iCloud. Then an apple certificate is automatically added to the keychain and used for every https-access. Deleting the certificate com.apple.idms.appleid.prd... will do as a workaround but the certificate continues to be added to the keyChain from time to time or if you start over deactivating iCloud and then activate back.
Is this still a bug in Safari? Rosario -
Revision: 5473
Author: [email protected]
Date: 2009-03-20 16:02:58 -0700 (Fri, 20 Mar 2009)
Log Message:
Fix for bug around handling of constraints during and after effects were run, both for old and new effects. Fix was to correctly record and handle styles that were set or not set in either state and to temporarily set width/height values for the duration of an effect if we disabled the relevant styles that affect width/height.
QE Notes: None
Doc Notes: None
Bugs: SDK-17809
Reviewer: Jason
Testing: checkintests, Mustella Effects, ListDataEffects
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17809
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.asRevision: 5473
Author: [email protected]
Date: 2009-03-20 16:02:58 -0700 (Fri, 20 Mar 2009)
Log Message:
Fix for bug around handling of constraints during and after effects were run, both for old and new effects. Fix was to correctly record and handle styles that were set or not set in either state and to temporarily set width/height values for the duration of an effect if we disabled the relevant styles that affect width/height.
QE Notes: None
Doc Notes: None
Bugs: SDK-17809
Reviewer: Jason
Testing: checkintests, Mustella Effects, ListDataEffects
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17809
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as -
Revision: 3233
Author: [email protected]
Date: 2008-09-16 12:57:29 -0700 (Tue, 16 Sep 2008)
Log Message:
Fix for bug related to see tag, [Exclude] metadata, and extra lines in mxml examples block.
Bugs: SDK-16886
QA: Yes
Doc:
Reviewed By: Pete F
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16886
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja vaRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
Revision: 3780
Author: [email protected]
Date: 2008-10-21 10:51:40 -0700 (Tue, 21 Oct 2008)
Log Message:
Fix for bug introduced yesterday when adding clipContent to FxContainer and FxDataContainer. The default value needs to be true.
Also fixing a bug in SystemManager since application isn't always an IRawChildrenContainer anymore. This was previously fixed and got clobbered in a merge.
QE Notes: None
Doc Notes: None
Bugs: SDK-17423, SDK-17697
Reviewer: Hans
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17423
http://bugs.adobe.com/jira/browse/SDK-17697
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxContainer.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxDataContainer.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.asThe network admin solved the problem:
“When I recreated the User Profile Service, I did not enable “NetBIOS Name” on the service, so all user accounts did not have the proper domain, which is why none of the targeting worked.
All users were listed as corp\username instead of rcd\username.”, Network Admin.
Further information: http://www.windowsclever.com/sharepoint/netbios-name-is-different-domain-name-user-profie-service-sharepoint-2010.html -
Revision: 3151
Author: [email protected]
Date: 2008-09-08 21:30:07 -0700 (Mon, 08 Sep 2008)
Log Message:
Fix for bug SDK-16761 - Method parameters missing from generated document
Bugs: SDK-16761
QA: Yes
Doc:
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16761
http://bugs.adobe.com/jira/browse/SDK-16761
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja vaHi,
Can you try putting the declaration of the URLLoader instance
outside your fetchISSN function and see?
That is:
var loader;
function fetchISSN(myform) {
//your code above this line
loader = new URLLoader();
//rest of your code -
Revision: 11521
Author: [email protected]
Date: 2009-11-06 11:47:48 -0800 (Fri, 06 Nov 2009)
Log Message:
ASDoc fixes for bugs FLEXDOCS-1102, FLEXDOCS-1103
QE notes: -
Doc notes: -
Bugs: - FLEXDOCS-1102, FLEXDOCS-1103
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/FLEXDOCS-1102
http://bugs.adobe.com/jira/browse/FLEXDOCS-1103
http://bugs.adobe.com/jira/browse/FLEXDOCS-1102
http://bugs.adobe.com/jira/browse/FLEXDOCS-1103
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/TextArea.as -
[svn] 4223: Some fixes for bugs found running the TC acceptance tests:
Revision: 4223
Author: [email protected]
Date: 2008-12-03 11:35:03 -0800 (Wed, 03 Dec 2008)
Log Message:
Some fixes for bugs found running the TC acceptance tests:
- Empty try {} throwing NPE while emitting code.
- OP_Callproperty and OP_Callproplex may have a known type but default value.
- Better diagnostic message for CONSTANT_TypeName and preliminary plumbing for CONSTANT_TypeName support.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/adobe/abc/GlobalOptimizer.javaRe: SB Audigy Series Support Pack 2.5 (08/09/2009)? Important Installation Notes
If any drivers are already installed, you must follow these steps to ensure a proper installation of the new Support Pack.
) Open a Command Prompt window with Admin privileges (right click and select Run as Administrator).
Type the following commands:
takeown /f C:\Windows\*.cdf
cacls C:\Windows\*.cdf /G [color="#ff0000"]Administrators:F
Where [color="#ff0000"]Administrators may?be different if you are running a localized version of Windows or?you can simply use your login name.
2) Unpack the previous Support Pack or Creative official release.
3) Run \Drivers\Setup.exe and choose Driver Uninstallation, select Delete all shared Creative audio driver files. and click OK. Reboot when asked to do so.
4) Make sure the following files were deleted, otherwise delete them manually:
- For Windows 7 / Vista 32-bit open?C:\Windows\System32 and delete UDAAPO32.DLL and?UDAPLD32.DLL.
- For Windows 7 / Vista 64-bit?open?[color="#ff0000"]C:\Windows\System32 and delete[color="#ff0000"] UDAAPO64.DLL and?[color="#ff0000"]UDAPLD64.DLL then? open?C:\Windows\SysWOW64 and delete UDAAPO32.DLL. -
Microsoft releases fix for Windows Update corruption errors
See ZDnet article Microsoft releases fix for Windows Update corruption errors found @
http://www.zdnet.com/microsoft-releases-fix-for-windows-update-corruption-errors-7000026582/
The Microsoft KB article is found @
http://support.microsoft.com/kb/947821
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”Hi Rick,
Really thanks for your sharing.
This will definitly help others in this forum.
Kate Li
TechNet Community Support -
FIX for BUG ID : 6760502 - cacao_launcher[19899]: exited abnormaly
Hello,
Is anyone aware about the fix for BUG ID: 6760502 : cacao_launcher[19899]: SUNWcacaort launcher : Common Agent Container exited abnormaly
/var/adm/messages shows
cacao_launcher[28953]: [ID 335192 daemon.error] Timeout occured on heartbeat channel, cleanup engaged
cacao_launcher[28953]: [ID 920319 daemon.error] watchdog : warning, sub child (28954) still alive after sending SIGQUIT.
cacao_launcher[28953]: [ID 583660 daemon.error] watchdog : warning, sub child (28954) still alive after sending SIGSEGV.
cacao_launcher[28953]: [ID 219817 daemon.error] SUNWcacaort launcher : Common Agent Container exited abnormaly
cacao_launcher[28953]: [ID 314456 daemon.error] SUNWcacaort launcher : no retries available
cacao_v2: [ID 702911 daemon.error] Cannot connect to agent: Connection refused
after placing a continuous ping on the cluster interconnects and clprivnet0 interfaces , the problem seems NOT to be occurring.
Thanks and Regards
Ushas Symon?
-
Our new pooled VDI collection reports the following errors in SCCM 2012 R2 regarding SCEP:
Service started without any malware protection engine; AV signatures out of date; AS signatures out of date
The Windows Update service is disabled and it is by design when we create a new collection, althought the service is enabled on the master template.
SCEP is not up-to-date, real-time protection is off, and this is causing us compliances issues.
Any ideas?Hi,
How do you set the SCEP to get definition updates?
The following blog might help.
http://gerryhampsoncm.blogspot.com/2013/08/config-mgr-2012-endpoint-protection_4240.html
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Need to download MS Malware Protection Engine / we use Security updates only in WSUS
we only do WSUS Security updates at work, and I need to MANUALLY download the update to MS Malware Protection Engine to get to version 1.1.10701.0. everything I find says windows update - can't do it. I need a URL to go to that has the definition
to download, every URL I find only has information regarding it. I need a URL to download the update. Any help would be appreciated.Hi,
Like below article description, the Microsoft Malware Protection Engine is running in these products:
Microsoft Forefront Client Security
Microsoft Forefront Endpoint Protection 2010
Microsoft Forefront Security for SharePoint Service Pack 3
Microsoft System Center 2012 Endpoint Protection
Microsoft System Center 2012 Endpoint Protection Service Pack 1
Microsoft Malicious Software Removal Tool
Microsoft Security Essentials
Microsoft Security Essentials Prerelease
Windows Defender for Windows 8
Windows Defender for Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2
Windows Defender Offline
Windows Intune Endpoint Protection
Thus you only could update it via these products as its description. This article provides information about how to update the Malware Protection Engine. Please read it as reference:
http://support.microsoft.com/kb/2510781/en-us
Karen Hu
TechNet Community Support -
any info, fix for this bug yet?
http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:53351documented location for this issue:
http://www.adobe.com/support/documentation/en/coldfusion/8/releasenotes.pdf
still seeking resolution and if CF 8.0.1 updater possibly
solves this issue? and senior product guys have any insight?
Maybe you are looking for
-
Configuration file /dbentities/common/bc4j.xcfg is not found in classpath
Hello, I used database data control and drag & dropped onto the page.If I clean and build & then run its fetching the data but if run project without build then I get the following exception. Configuration file /dbentities/common/bc4j.xcfg is not fou
-
I am using Lightrrom 4 and have just started seeing this error message with previously cataloged images and on new catalog imports. I can open the same images from the CF card in Bridge with no problem. How can I remedy this new problem?
-
Resolve error when using loadjava
Hi, I'm trying to use loadjava to load my Java class into Oracle. I got the following error: resolving: com/company/package/class1 Errors in com/company/package/class1: ORA-29534: referenced object SCOTT.com/company/package/class2 could not be resolv
-
Hi, I have started learning abt Enterprise Search. I have some queries on it. Pls clear my doubts. 1. It has been said that, "SAP NetWeaver Enterprise Search is delivered as an appliance with the software preinstalled on dedicated hardware" So, once
-
No EL support in JSTL tags?
I plan to use both JSTL and JSP 2.0 EL in my JSPs. I tried to use an if-tag, with an expression in the test attribute like this: <c:if test="${!empty sessionScope.userdata}"><h2><mywaf:include name="userinfo"/></h2></c:if> The JSTL specs show example