Microsoft Jscript compilation error - expected ';'

I had JRE 6 u5 on my new HP Laptopt dv-1110el. I've updated it from www.java.com to JRE 6 u11. Since then, sometimes randomly, when a java applet is loaded (I use IE7 protected mode/Vista Home Premium. Sadly I can't run IE7 with DEP too because of compilation error process by Sun who uses too old MS ATL libraries prior to v 7.1 for its Java builds! But this is another story and another bug...) I get this requester twice: Microsoft Jscript compilation error - expected ';', Ok.
After I press OK everything goes on fine and I can load other applets without errors, 'till I close & re-open IE7 where will happen again.
I tried to uninstall all Java I had, to clean-up registry but the 'Microsoft Jscript compilation error - expected ';'' pop-up requester still come out. Others experienced this?

All I did was to update my brand new Laptop HP Pavilion dv5-1110el (IE7/Vista Home Premium x86, SP1, Ita, UAC on) from pre-installed JRE 6 u5 -> JRE 6 u11 using [http://java.com/it/download/installed.jsp?detect=jre&try=1]
After this the bug started to happen.
Uninstalling all Java entries from Control Panel and using HP Recovery manager to reinstall default JRE 6 u5 solves the problem. Looks like a bug in JRE 6 u11.
Here is a shot of the problem (I have to go thru 2 Ok requesters):
Image full size: [http://www.pctunerup.com/up/image.php?src=_200901/20090107015654_Immagine.jpg]

Similar Messages

Microsoft JScript compilation error alert on initial load using IE7

I have noticed that a javascript alert window is displayed whenever an Applet is initially launched using IE7.
This does not happen using IE8 (or FF, SF, Chrome, etc).
I thought it was our implementation, but the alert is also shown launching any Applet from the following;
http://java.sun.com/applets/jdk/
There are typically 2 alerts and after pressing OK, the Applets appear to run successfully.
The specific error is;
Alert title: Microsoft JScript compilation error.
Alert content: Expected ')' in regular expression.
I don't always remember this error using IE7.
Maybe it's related to the JRE?
I am currently using: (build 1.6.0_26-b03)
Any solution out there?

879129 wrote:
..I thought it was our implementation, but the alert is also shown launching any Applet from the following;
http://java.sun.com/applets/jdk/
I just had a look at the source of two of the pages from the 1.4 section of that page (Animator (1) & ArcTest) & saw some very questionable HTML for the <tt>applet</tt> element, as well as two seemingly unrelated scripts. What do you get for (instead of those), the GIF Animator (the applet form)? It uses <tt>deployJava.js</tt>, which is about the only deployment option that Oracle cares about at the moment.

Microsoft JScript Compilation Error

Hello,
I have written a program that is controlling a manufacturing setup. The labview program consists of two independent loops. One controls the motors through an analog output. The second turns a bath sonicator on and off at a specified interval. The sonicator loop is output through a digital channel. This program runs for approximately 5 days. However after 18 to 24 hours I receive an error... "Header: Mircosoft JScript Compilation Error Below: Syntax Error" The overall program continues to run but the sonicator portion stops running. I have put a log process into the sonicator loop in a hope to determine a pattern. I ran the program multiple times they stopped running at random times during the night and there is no pattern to the number of cycles completed. Thanks to the log I have determined this is definitely not a hardware problem, but is a software problem. If anyone has an idea I would greatly welcome.
Myles

Sorry that was information I should have included in the first message but it was a late night.
1) I was running it on labview 8.5.3, I just upgraded computers and the school installed labview 8.6.1 on this computer. There seems to be no difference in the problem between computers or between versions of labview.
2) I have outline the "sonicator" loop in red
3) Both computer have been running Windows XP Professional, I don't think the problem is originating in labview as the main program continues to run.
4) The log I created can be seen in the last frame in the sonicator loop. It simply outputs the time and date that the sonicator loop completed a cycle
here is an example of a cycle specified to turn the sonicator on for 20 minutes out of every hour
3:24 PM 1/18/2010
4:24 PM 1/18/2010
5:24 PM 1/18/2010
6:24 PM 1/18/2010
7:24 PM 1/18/2010
8:24 PM 1/18/2010
9:24 PM 1/18/2010
10:24 PM 1/18/2010
11:24 PM 1/18/2010
12:24 AM 1/19/2010
1:24 AM 1/19/2010
2:24 AM 1/19/2010
3:24 AM 1/19/2010
4:24 AM 1/19/2010
5:24 AM 1/19/2010
6:24 AM 1/19/2010
7:24 AM 1/19/2010
8:24 AM 1/19/2010
9:24 AM 1/19/2010
10:24 AM 1/19/2010
11:24 AM 1/19/2010
12:24 PM 1/19/2010
1:24 PM 1/19/2010
2:24 PM 1/19/2010
3:24 PM 1/19/2010
4:24 PM 1/19/2010
5:24 PM 1/19/2010
6:24 PM 1/19/2010
7:24 PM 1/19/2010
8:24 PM 1/19/2010
This log stopped at 8:24 and the main program was still running the next day when I came in, with the error stated above showing. There is no physical damage to the circuit, and I can still manually turn the sonicator circuit on/off using a small sub VI, I would expect it to be a software problem in the "sonicator" loop. Also I can restart this program and the sonicator acts normal again for ~24 hours until the same error.
5/6) This project was kind of frankinsteined together (as you may recognize by the top loop, which is the motor control loop, the school is too cheap to invest in NI Motion control) there is no real communications between the equipment and labview. Labview is simply outputting signals, in the case of the stepper motor, the analog step signal is used to trigger a step in the motor encoder board. In the case of the sonicator the on/off signal is amplified and feed into a normally open relay which controls the power to the sonicator. The system was designed to handle errors by failing to safe, although there haven't been any errors other than this one.
Although I believe it is a software problem I am using a PCI-6024e, just in case it is relevant.
Thank you for the help
Myles

Jscript compilation error - expected ';'

We are preparing to use Web Start to launch a new application. Some of the workstations get a jscript compilation error pop up immediately after the autoproxy (pac) script loads. If we configure the java control to use direct connect it works fine. I would prefer using the browser settings, and allow the autoproxy config file determine what proxy (if any) to use.
I finally ended up using the following test script, and still get the error.
// alert("proxy pac active");
function FindProxyForURL(url, host) {
return "DIRECT";
Your help will be appreciated.

All I did was to update my brand new Laptop HP Pavilion dv5-1110el (IE7/Vista Home Premium x86, SP1, Ita, UAC on) from pre-installed JRE 6 u5 -> JRE 6 u11 using [http://java.com/it/download/installed.jsp?detect=jre&try=1]
After this the bug started to happen.
Uninstalling all Java entries from Control Panel and using HP Recovery manager to reinstall default JRE 6 u5 solves the problem. Looks like a bug in JRE 6 u11.
Here is a shot of the problem (I have to go thru 2 Ok requesters):
Image full size: [http://www.pctunerup.com/up/image.php?src=_200901/20090107015654_Immagine.jpg]

JRE 6 update 10 : Webstart give Microsoft JScript compilation error

We had some problem yesterday with our application that is launch from webstart. Everyone that upgraded to JRE 6 update 10 had the problem. This morning we don't have the problem. We are all on Windows Xp 32 bit, english or french and we all use a proxy.
I suspect that the problem is related to how update 10 handle the proxy responses.
here a screenshot that I took yesterday.
the workflow was this :
we had a jnlp and when we click on it.. javaws starts and we got this popup. We can close it, and the application will download, and before the application starts.. we had the popup again.. close it again.. and the application run perfectly.
here a screenshot of my proxy setting in IE and firefox : (the default browser is FF)

I found the problem. I am using a proxy auto config script, which works fine in ie and ff but not javaw which inherits proxy settings from ie.
I narrowed it down to a regular expression literal that ends with an escaped forward slash: /\//. I think it's valid, the forward slash is escaped (works in ie and ff). You can reproduce this by configuring ie to use the following pac script:
function FindProxyForURL(url, host)
     var retVal;
     try
          retVal = /\//.test("/") ? "DIRECT" : "PROXY localhost:80";
     catch (e)
          retVal = "PROXY localhost:80";
     return retVal;
}I debugged it in ie and it works with no errors or exceptions.

Microsoft JScript Runtime Error, Line: 0, Error: Object Expected?

Hi,
I just got a new computer and I have Java 2 Runtime Environment SE v 1.4.2. I keep having problems with it. It says, "Microsoft JScript Runtime Error, Line:0, Error: Object Expected. I have no idea what to do or what is actually causing this. It shows up randomly when I have been using "Dell Jukebox by musicmatch" or even when I'm surfing. Can someone please help me fix the problem?
"Jay"

Hi,
I just got a new computer and I have Java 2 Runtime
Environment SE v 1.4.2. I keep having problems with
it. It says, "Microsoft JScript Runtime Error, Line:0,
Error: Object Expected. I have no idea what to do or
what is actually causing this. This is not a java err. It is a scripting error.
It shows up randomly
when I have been using "Dell Jukebox by musicmatch" or
even when I'm surfing. Can someone please help me fix
the problem?
"Jay" Someone can certainly help you - contact the website's webmaster & send them the err. They wrote it; they have to fix it.

Microsoft JScript runtime error: Not implemented

Unhandled exception at line 23, column 375 in
http://localhost:50189/Default.aspx
0x80004001 - Microsoft JScript runtime error: Not implemented
Line 23 is the javascript for insights
Any ideas on what I am missing? I am adding in only usage data and am getting the following error.

Hello John,
Do you have the same issue with the latest version of Application Insights in Azure Portal?
AI Java Script was changed, and a lot of bugs were fixed since the moment you posted this question (sorry for my late reply, not my area of expertise at all, so I missed this thread initially...), so everything might be working as expected already.
Dmitry Matveev

Microsoft JScript runtime error '0x800A138F' Enterprise 10

Post Author: kgreeley
CA Forum: Deployment
I get the following error when trying to ge to the 'Instance Manager' or 'Schedule Manger' from the Crystal Enterprise Admin Launchpad. Microsoft JScript runtime error '0x800A138F'
Object expected
line: 752I can, however, get to the management console to schedule my reports. This used to work fine, but gave up the ghost after I had a problem with the oracle installation on that server. I have tried installing and reinstalling JAVA (Sun) on that Machine to no avail. I have also installed the latest version of Java and then backpatched down to version 4, also to no avail.I have tried running the enterprise install shield again only selecting the Java components. No good. I deinstalled and then reinstalled the java components, no good.I have done the same with my Oracle install - also did not help.Any ideas anyone ?

No problem with doing that but please let us know so that we are not all working on the same thing.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Crystal Report Viewer Microsoft JScript runtime error

When I use the crystal viewer control to render a report on the screen I receive the following error message:
Microsoft JScript runtime error: Object doesn't support property or method 'isObject' ... and the following line is hilighted:
if(!bobj.isObject(json)).
Here is the markup for the test page I'm using
{<body>
<form id="form1" runat="server">
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
AutoDataBind="true" ReportSourceID="crSource" />
<CR:CrystalReportSource ID="crSource" runat="server">
</CR:CrystalReportSource>
</form>}
I believe I set all info on crSource correctly (report path etc ...) because If I remove the Crystal reports viewer from the page and just use the crsource (i.e crptSource.ReportDocument.ExportToHttpResponse ...) I can export the report OK. Its only when I have the crViewer on the page Is when I recieve this error.
Web Config
<assemblies>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<controls>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" namespace="CrystalDecisions.Web" tagPrefix="CR" />
<http handlers>
<add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
appsettings
<add key="CrystalImageCleaner-AutoStart" value="true" />
<add key="CrystalImageCleaner-Sleep" value="60000" />
<add key="CrystalImageCleaner-Age" value="120000" />
I am using crystal reports 2008, visual studio 2008, windows 7 pro, MS Sql Server 2005, IE9
I uninstalled crystal reports, and reinstalled crystal reports 2008 sp3 (Full build) - No help
When I goto help about visual studio it says crystal reports 2008 (No specific version info)
Assembly cache on the machine has
12.0.2000.0 and 12.0.1100.00 as the vast majority ... a few (Design and Engine) have older 10.5.3700 and so forth (There are so many)
I found this problem on the web with different solutions involving frame work folder or not having IIS setup to server the crystal reports viewer ... this is happening to me on my local development machine using the ASP.Net Develepoment server included with VS2008 ..
Any help you could give me would greatly be appreciated
Thanks in advance
Kevin

Hi Kevin,
Take a look at below SAP Note.
[1531003 - Error: bobj undefined - javascript error |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333331333033303333%7D.do]
I got this result just by searching 'bobj is undefined javascript' in the top right search box.
Thanks,
Bhushan.

Microsoft JScript runtime error: 'bobj' is undefined

Hi!,
I am using SAP crystal report Version=13.0.2000.0 ,visual studio 2010 and SAP crystal report runtime engine for .net framework 4(64-bit)
I am getting following error in crystal report loading while deploying the project in Cloud while report is shown in design mode.
Microsoft JScript runtime error: 'bobj' is undefined

Moved to .NET SDK forum.
Search on bobj is undefined and you'll find lots of info on how to resolve.
Don

CRVS2010 Beta - Microsoft JScript runtime error: 'bobj' is undefined

1. When I try to generate a crystal report with the "CR4VS2010" from the web client, I am getting the following error:
Microsoft JScript runtime error: 'bobj' is undefined.
I am using the OS -> Windows Vista.
2. Where as if i try to generate the report using the service job, i am getting the following error:
System.IO.FileNotFoundException was unhandled
Message=Could not load file or assembly 'file:///C:\Program Files\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified.
Source=mscorlib
FileName=file:///C:\Program Files\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll
FusionLog==== Pre-bind state information ===
LOG: User = SAGITEC\karthikeyan.s
LOG: Where-ref bind. Location = C:\Program Files\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll
LOG: Appbase = file:///E:/Source/Eclipse/Bin/
LOG: Initial PrivatePath = NULL
Calling assembly : (Unknown).
===
LOG: This bind starts in LoadFrom load context.
WRN: Native image will not be probed in LoadFrom context. Native image will only be probed in default load context, like with Assembly.Load().
LOG: Using application configuration file: E:\Source\Eclipse\Bin\NeoSpinBatch.vshost.exe.Config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.21006\config\machine.config.
LOG: Attempting download of new URL file:///C:/Program Files/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/win32_x86/dotnet1/crdb_adoplus.dll.
Edited by: Don Williams on Apr 26, 2010 6:22 AM
Edited by: Jason Everly on Apr 26, 2010 9:30 AM
Changed subject line to correct format

3. For fixing the error#2, i copied the DLL to the respective directory mentioned in the above error. But it gives me new error :
System.IO.FileLoadException was unhandled
Message=Mixed mode assembly is built against version 'v2.0.50727' of the runtime and cannot be loaded in the 4.0 runtime without additional configuration information.
Source=mscorlib
StackTrace:
       at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
       at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
       at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks)
       at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark)
       at System.Reflection.Assembly.LoadFrom(String assemblyFile)
       at CrystalDecisions.ReportAppServer.DataSetConversion.DataSetConverter.DataSetProcessingDelegate(IntPtr arg)
InnerException:
Please help me in resolving the above issues ASAP.
Thanks in advance,
Karthikeyan Sridharan

0x800a1391 - Microsoft JScript runtime error: 'applicationCache' is undefined

Hi,
I'm running the ContosoConf labs available here:
https://www.microsoft.com/learning/en-ca/companion-moc.aspx
under 20480B Programming in HTML5 with JavaScript and CSS3
When running any of the labs in VS 2012 Professional w/update 4, debugging in IE 9, an exception appears on index.htm, 0x800a1391 - Microsoft JScript runtime error: 'applicationCache' is undefined on this line in offline.js:
// Error fetching appcache.manifest: so we are probably offline
applicationCache.addEventListener("error", hideLinksThatRequireOnline, false);
It appears all the references in the project are ok and I am running IE 9.
Please advise, any help at all much appreciated. :)
Best,
O

Hi,
that is correct.... HTML5 is supported in IE10 and later (http://caniuse.com )
feature test with
if(window.applicationCache)
test your website from a file server (http protocol), not a local file (file protocol). eg. localhost/mywebsite.local. (select the publish option from your IDE). You cannot debug directly from VS (f5) eg. http:/localhost:port (no domain to map the manifest
to),
there are also some gotcha's with debugging the appChache api. Delete the client manifest (Internet Options/Browsing History>Settings>Caches and databases)
you feature test the navigator object to determine if the userAgent is 'online' with
if(!navigator.online)
Regards.
Rob^_^

Microsoft VBScript compilation error '800a0408'

Help, I'm trying to run a stored procedure, but i'm getting
the following error -
"Microsoft VBScript compilation error '800a0408'
Invalid character
/admin/afterreviewupdatepricing.asp, line 39
if(Request.QueryString(“day7“) <> "") then
updatepricingCommand__7dayrate =
Request.QueryString(“day7“)"
Where row 39 is -
if(Request.QueryString(“day7“) <> "") then
updatepricingCommand__7dayrate =
Request.QueryString(“day7“)
I've attached the code --
Any ideas as to what I'm doing wrong????
Thanks

Spot on Darrel, thanks, i guess that is the problem with
cutting and pasting from MS Word!!!. The bad news is that having
overcome that problem, I now get a precision invalid error, (below)
I can see that this is because I'm updating data in a DECIMAL
column, but not sure how or what to do to fix it??
Any ideas??
"Microsoft OLE DB Provider for SQL Server error '80004005'
The precision is invalid.
/admin/afterreviewupdatepricing.asp, line 80 "
CODE ATTACHED - -

Jscript compilation error on IE pages

Could any one help me on this issue i've had this since i updated sun java applet and now get this all kind of scripting errors and a yellow trangle in the corner and when it asks me to update java after the download is says Jscript compilation error how can i fix this? as some of my internet explorer pages are not working properly i am a xp user and have unistalled java and its no different is it a error there end or have i got a problem with my scripting?
Edited by: 4PcHelp1 on Nov 11, 2009 8:19 AM

4PcHelp1 wrote:
Could any one help me on this issue i've had this since i updated sun java applet..URL?
.. and now get this all kind of scripting errors ..'scripting'? Are you referring to JavaScript or Java?
..and a yellow trangle in the corner ..In the corner of what? The applet, the window that is a pop-up, the 'script'?
...and when it asks me to update java after the download is says Jscript compilation error how can i fix this? as some of my internet explorer pages are not working properly i am a xp user and have unistalled java and its no different is it a error there end or have i got a problem with my scripting?You definitely have a problem with your communication. Your post reads like 'so much nonsense'.

Microsoft Jscript runtime error: Object expected

I have a Visual Studio 2005 web application that uses a Crystal Viewer to display reports developed in XI. When I run the application on my development PC, I get no error, even with the debug turned on in IE7. When I run the application on my PC, using the web server address and click on the drop down to select the parameter, I get an error that says; u201CMicrosoft Jscript runtime error: Object expectedu201D. Both my development PC and the code published on the web server use the fully qualified report path down to the webserver name. No problem on my development PC running in Visual Studio, but a problem accessing the server. The onClick portion is the highlighted area is where the debug stops. This is code that is created from crystal. Originally, I was getting an error; 'Load Report Failed', but once I used the full path name of the report down the the webserver name, that error disappeared. I have XI installed on the web server and I can open and run the reports there. What am I missing on the web server? Thanks.

That would be the CR Service Pack located here:
https://smpdl.sap-ag.de/~sapidp/012002523100006255422008E/crxir2_sp4_inc.exe
You will then have to ensure that the same runtime is on the server. Use the msm or msi files from here:
http://resources.businessobjects.com/support/communityCS/FilesAndUpdates/crxir2sp4_net_merge_modules.zip
https://smpdl.sap-ag.de/~sapidp/012002523100009657852008E/crxir2sp4_net_si.zip
I'd recommend the msi as it does not require you to build a deployment project. Ensure that you uninstall the current CR runtime on the server. Also, once that is done, check to make sure that the c:\program files\business objects directory is removed. Then install the CR runtime using the above msi file.
Ludek

Microsoft Jscript compilation error - expected ';'

Similar Messages

Maybe you are looking for