Microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program

Dear All Good day
i have Lync server 2010 and runing Good
yasterday some users cann't open Lync Client and give us this error Massege
microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows
registry . please uninstall and then reinstall lync.
but another users runing Good
i'm try to unistall lync Client and install again but same problem
and Try to Install New server lync 2010 but same problem
please help me for resolve this problem
Khaled Eldosuky
Senior System Engineer
[email protected]

Hi All,
I was not able to uninstall the trial lync client, and re-install a new client? Any help will be appreciated?
All i see is the below message....
microsoft
lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows registry . please uninstall and then reinstall lync.
Regards,
Venkat

Similar Messages

I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet.

I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet. Then I check CNN for a time stamp, and I am connected to the internet. I have reset everything suggested in other posts, ensured any other device that could be hogging bandwidth is off, the router is reset, the iPad is reset. The other devices are not having this problem, and it happens on both places I use the iPad, the university library, (getting a second degree after a change in a long time career and at home. Any insight into this issue would be appreciated.

Saing yu tried everthing provides little information to us. We do not know what you tied.
Have you tried:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on your router- Resetting network setting: Settings>General>Reset>Reset Network Settings
The toubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does you iPod conenct to other networks?
- Do other devices connect to your network?

Updated iTunes to 11 and cannot start the program. checked compatibility, made sure quick time was up to date, running IE 9 and Windows 7. What can I do?

Updated iTunes yesterday to 11.0 (something) and th program will not start. Check compatibility, and made sure quick times was up to date. Deleted the program, reinstalled, and rebooted, nothing I'm running IE9 and Windows 7. What else do I look for?

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

Outlook 2010 : Cannot start Microsoft Outlook. Cannot open the Outlook window.

Hi
Using Outlook 2010 with an Exchange 2003 back-end.
Already have an Outlook profile (created in Outlook 2003).
When launching Outlook 2010 I get:
"Cannot start Microsoft Outlook. Cannot open the Outlook window"
I've read several posts with this error message and a common "workaround" / "solution" was to run: “Outlook.exe /resetnavpane”
I tried that and it didnt resolve the issue.
The only way I found to resolve this was to create a new Outlook profile.
Launching with a new Outlook profile works fine.
- Is this a "known issue" ?
- Is there a way to diagnose / throubleshoot further without having to create a new profile?
Thanks
- AL

Hi,
Thank you for using Outlook IT Pro Discussions forum.
This problem can occur when file that maintains the Navigation Pane settings becomes corrupted. This file is called profilename.xml, where profilename is the name
of your Outlook profile. Normally, we can resolve this issue by starting Outlook with the command
Outlook.exe /resetnavpane
or
creating a new Outlook profile.
Next time, you may also try to rename the profilename.xml from the folder first to see if the issue can be resolved:
Windows XP: C:\Documents and Settings\username\Application Data\Microsoft\Outlook
Windows Vista, Windows 7: C:\Users\username\AppData\Roaming\Microsoft\Outlook
For more information, you can refer to this KB article:
Error starting Outlook: "Cannot start Microsoft Office Outlook. Cannot open the Outlook window."
http://support.microsoft.com/kb/2022778
Best Regards,
Sally Tang

MS Office Professional Plus 2010 cannot verify the license (in use for more than a year)

After more than a year of use, I now receive the following error message for all Office Applications ....
"Microsoft Office Professional Plus 2010 cannot verify the license for this product. You should repair the Office program by using the Control Panel." When I Click the OK button, the application is terminated.
I tried using the Control Panel to repair Office, and I have tried to re-install Office. I still get the same message. Note, during repair or installation, my Product ID key is accepted.

It is working. If you have 64bit machine please type cd C:\Program Files (x86)\Microsoft Office\Office14 --> cscript
ospp.vbs /act
Thank you

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

"Cannot start Microsoft Outlook. Cannot open the Outlook window. The information store could not be opened." [Office 2013/Office 365]

So here is the error in Outook 2013
"Cannot start Microsoft Outlook. Cannot open the Outlook window.
The information store could not be opened."
Very Very frustrating having spent three hours today reading forums, installing, reinstalling etc.
HELP?
1) I have completely un-installed and reinstalled Outlook 2013 (And also all of Office 2013)
2) Have blown away all profiles and created new ones.
3) Have blown away all Outook data files and starting from scratch
4) Have run /resetnavpane............in an attempt to rebuild the navigation pane
5) Have gone into Registry and deleted all remnants of previous Outlook installs, HKey_Local, System Current
config......Office etc.
6) I have spent hours reading online fixes/technet forums etc..............to no avail.
Please give more suggestions.
Thanks
Phil H Charlotte, NC

Hi,
Basically you have tried a lot but the issue still exists, now one more suggestion I can provide is to make sure Outlook is not configured to run in Compatibility Mode:
Take Windows 7 for example, in Start -> Type "Outlook" in the search box -> Right click on the "Outlook 2013" shortcut -> Click Properties -> Under Compatibility tab -> Make sure "Run this program in compatibility
mode for" is clear.
This method has resolved the issue for some users in this thread below:
http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/cannot-start-microsoft-office-outlook-error-cannot/e75265b4-044f-4d92-a078-1acbf9ae34d6
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Cannot start the db after reboot machine

Hi,
Oracle DB: 10.2.0
OS: RHEL5
Successfully installed db and created the database.
but after reboot of machine I cannot start the database.
I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
oracle@med ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
SQL> conn sys/medisys@rmct as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Thanking you,
regards,

risingstar wrote:
Hi,
Thanks for ur reply
plz have a look
[oracle@med ~]$ cd $ORACLE_HOME/dbs
[oracle@med dbs]$ ls
hc_rmct.dat init.ora initrmct.ora orapwrmct sqlnet.log
initdw.ora init.ora.84201013612 lkRMCT spfilermct.ora
regards,Well.You see that your sid is rmct not RMCT then
export ORACLE_SID=rmct
sqlplus "/as sysdba"
startup

Cannot start the db after reboot

Hi,
Oracle DB: 10.2.0
OS: RHEL5
Successfully installed db and created the database.
but after reboot of machine I cannot start the database.
I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
oracle@med ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
SQL> conn sys/pwd@rmct as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Thanking you,
regards,

By definition your installation was not successful.
What network were you connected to when you installed the database?
After you rebooted are you still connected to the same network?
Has the IP Address changed?
How is "HOST" defined in your listener.ora tnsnames.ora files?
Oracle 10g dot anything is currently in desupport mode. It would be far better to install 11gR2 at this point in time.

Microsoft Lync 2010

Hi.
Microsoft Lync 2010 installation on existing active directory.
DNS and DHCP working fine. When i installation Microsoft lync server 2010
Error appear :
Checking prerequisite SqlExpressRtc...installing...failure code -2068578304
Prerequisite installation failed: SqlExpressRtc
Please give me proper solution.
I hope you understand. Please early response.

This issue is normal because of following reason:let me notice that installing Microsoft SQL Server 2008 on a Domain Controller is not recommended by Microsoft. For security reasons, Microsoft recommends to not install SQL Server 2008 R2
on domain controllers. SQL Server Setup will not block installation on a computer that is a domain controller, but the following limitation (among others) apply:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
Microsoft Lync Server tries to install SQL Express using the
NetworkService account. This can cause installation to fail on Domain Controllers; to move forward and get it installed.
So that Lync is not supported to deploy on Domain controller.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Cannot start the presentation server

Linux OS
OBIEE 11.1.1.5.0
Weblogic Server 10.3.5.0
OBIEE gurus,
I cannot start the presentation server via EM or via the command line ./opmnctl startproc ias-component=coreapplication_obips1.
I get the error in the comman line:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=****:9501
    0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
    coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication_obips1/
Error
--> Process (index=1,uid=2107403675,pid=27813)
    failed to start a managed process after the maximum retry limit
    Log:
    $ORACLE_INSTANCE/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1/console~coreapplication_obips1~1.log
I have checked the log above which contains:
13/07/18 15:27:07 Start process
13/07/18 15:27:14 Start process
13/07/18 15:58:53 Start process
13/07/18 15:59:00 Start process
Not very helpful!
I have checked the OPMN log at $ORACLE_INSTANCE/diagnostics/logs/OPMN/opmn/opmn.log which has the following errors:
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:58][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
I have tried refreshing the user GUIDS, loading another rpd file in through EM that I know works fine in another environment, cleaning the permissions in the web catalog but all so dar have not resulted in me being able to start the presentation server.
I would welcome any feedback on this as it is driving me crazy!
Thanks in anticipation.

Hi ,
I tried it but no use. That thread had some errors displayed in it. But i get just a warning.
Pls help
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:41 2010
File: project/sawserver/sawserver.cpp Line: 604
Properties: ThreadID-1532
Location:
     saw.sawserver
     saw.sawserver.terminatesawserver
     saw.threads
Oracle BI Presentation Services are shutting down.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-968
Location:
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Oracle BI Presentation Services 10.1.3.4.1 (Build 090414.1900) are starting up.
Type: Warning
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/websubsystems/webextensionbase.cpp Line: 380
Properties: ThreadID-968
Location:
     saw.webextensionbase.init.workstationCheck
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
WARNING: The Oracle BI Presentation Server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.). Number of concurrent users may be severely limited by the operating system.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 459
Properties: ThreadID-968
Location:
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Oracle BI Presentation Services have started successfully.
Thanks
Jaan

How to Install microsoft lync 2010 client on 9800

How to Install microsoft lync 2010 client on 9800?
I have tried all possible links to download the files. but how can i integrate it???
Consultant

There is a step by step guide on how to download and install the Lync Client at the technology website, ITProportal
http://www.itproportal.com/2012/06/07/lync-2010-blackberry-client/

Protege 2010 cannot start Slimline Combo drive

Hi
I have two Portege 2010 with two different Slimline Combo drive for Cardbus Cable - neither of the two computers are able to start the Slimline Combo drives. Both computer with each different drive were working perfectly in the beginning of September, but none now.
One computer does not recognise the drive at all - the other respond in the hardware profile, that it cannot start the drive.
Both computers run Windows XP 2nd edition.
Thank you
Best regards
Anne Mette Voss

Hi
Do you mean the external PC card CD/DVD drive cannot be recognized in the Windows XP?
Hmm I think Ive got a idea.
I think you should access the device manager and remove the *Texas Instruments PCI card bus controller* and the *Toshiba ToPIC100 CardBus controller*.
Then reboot the notebook.
After the reboot the OS should install a new hardware (both CarBus controllers) and after this installation you could try to connect the external PC card CD/DVD drives again!
Good luck

Spa504g with Microsoft Lync 2010

Hi
I just want to ask if the spa504g can be registered to microsoft lync 2010 directly? Does anyone here manage to do this? If not directly then what are the appliance needed?
Thanks

Wrong forum, ask in "small business voice - SPA phones". You can move you post using the actions panel on the right.

Integration of CUCM 8.5 with Microsoft Lync 2010 issues

Hi All,
We have integrated CUCM 8.5 with Microsoft Lync 2010 (both Mediation and front end server on Virtual machine on same location) on lab environment, and which is working perfectly on both ways (Two way calls with no issues). But, when we tried configuring the same on live environment, we have no two ways calling between Lync client and IP phone endpoints. Our Mediation and front server are in U.S and CUCM 8.5 cluster are in India and lync clients are in India region, connected via MPLS link and all the traffic ports are open. The following are the configuration on both sides:
CUCM side:
•- Created Direct SIP trunk with MTP enabled.
•- Assigned Mediation server IP address to Port 5068.
•- TCP enabled
LYNC Side:
•- Followed the steps from Cisco Lync integration document through cisco website.
Are they any other configuration requires, when the servers are in different location?

You configure the CUCILync client as a shared line. You then tell the CUCILync client what to control either the desk phone or use the CUCILync client itself. When CUCILync controls the phone it is not registered in CUCM. CUCILYNC will still give a screen POP when the desk phone is controlled.

Microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program

Similar Messages

Maybe you are looking for