Microsoft Lync Server bug
Dear Sirs!
One of our customer have a MS Lync Server problem.
They are use Windows Server 2008R2 SP1 and configured windows Active Directory, Exchange Server 2013 standard, Lync Server 2013 standard
They have 100 client in MS Lync Server 2013 standard and these 100 users sliced into 7 group. Name of
Бүгд /it mean all/ group there have all users.
And when they start group conversation to Бүгд group the issue is that, some of the users see a blank conversation window after joining the group conversation these users cannot see the first message of the group conversation.
In the below link there is have same problem but they can’t find solution. So please help us how we can fix this problem?
http://social.technet.microsoft.com/Forums/lync/en-US/33c0135e-3862-42e5-885a-873583bd79b9/group-conversation-missing-first-message?forum=ocspresenceim
Best regards, Azbayar Bat-Ochir
Hi,
As mentioned in the other post, in Lync Server 2010 this was by Design. I don't know if this changed in Lync Server 2013.
You can ask users to remove off-line contacts but I doubt that they want this solution.
David
Similar Messages
-
Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003 -
Dear Team,
I have two Enterprise lync 2013 pools, abcPool and abcpool1. abcPool1 has got two servers, Server1 and server2. and abcpool has one FE server named "Server 3". and they have pool pairing.
Replication was fine between them when i had only one FE server in each pool, one day FE service broke on one of the FE server on abcpool1 and failed to start so i had to do failover to another pool, at that time i introduced one more FE in abcPool1, that
why now 2 FEs in abcPool2. Server1 FE service was resolved by reinstalling the binaries. However after that im unable to get the backupservice state to normal, i tried the below articles with no luck,
http://social.technet.microsoft.com/Forums/lync/en-US/0403621e-26b6-4cd0-bbca-8534a20de665/backup-service-pool-ownership-conflict-during-import?forum=lyncdeploy
http://msucmenow.blogspot.in/2013/05/troubleshooting-lync-2013-pool-pairing.html
"Event on Server 1"
Log Name: Lync Server
Source: LS Backup Service
Date: 1/21/2014 8:02:33 AM
Event ID: 4073
Task Category: (4000)
Level: Warning
Keywords: Classic
User: N/A
Computer: ABC.net
Description:
Microsoft Lync Server 2013, Backup Service user store backup module detected items having pool ownership conflict during import.
Items having pool ownership conflict:
ItemId: 1b3be172-b121-43cf-bd4e-b3d368eae6a9, DocId: 7972, DocName: urn:hcd:[email protected]
ItemId: 1b3be172-b121-43cf-bd4e-b3d368eae6a9, DocId: 7973, DocName: urn:lcd:[email protected]
ItemId: 1b3be172-b121-43cf-bd4e-b3d368eae6a9, DocId: 7974, DocName: urn:upc:[email protected]
PS C:\Users\lyncadmin> Get-CsBackupServiceStatus -PoolFqdn pool1.net | fl
ActiveMachineFqdn : abc1.net
OverallExportStatus : SteadyState
OverallImportStatus : ErrorState
BackupModules : {UserServices.PresenceFocus:[SteadyState,ErrorState],
ConfServices.DataConf:[FinalState,NormalState],
CentralMgmt.CMSMaster:[FinalState,NotInitialized]}
Following error in "Lync Server" logs on server3 on abcPool.
Log Name: Lync Server
Source: LS Backup Service
Date: 1/21/2014 9:37:47 AM
Event ID: 4069
Task Category: (4000)
Level: Warning
Keywords: Classic
User: N/A
Computer: SQL1.net
Description:
Microsoft Lync Server 2013, Backup Service user store backup module encountered an exception that was handled gracefully when importing document batch.
Batch file: UserServices\PresenceFocus\1-UserServices-8\Data\488bc218-9954-4caf-a5da-89efdb7b85a7_0_1562.xml.
Exception: System.Data.SqlClient.SqlException (0x80131904): Snapshot isolation transaction aborted due to update conflict. You cannot use snapshot isolation to access table 'dbo.Batch' directly or indirectly in database 'rtcxds' to update, delete, or
insert the row that has been modified or deleted by another transaction. Retry the transaction or change the isolation level for the update/delete statement.
Log Name: Lync Server
Source: LS Backup Service
Date: 1/21/2014 9:52:45 AM
Event ID: 4064
Task Category: (4000)
Level: Warning
Keywords: Classic
User: N/A
Computer: SQL1.net
Description:
Microsoft Lync Server 2013, Backup Service user store backup module encountered an exception that was handled gracefully during export.
Additional Message:
Exception: System.IO.IOException: The process cannot access the file '\\SQl1.net\LyncShare\1-BackupService-10\BackupStore\UserServices\PresenceFocus\Cookie\Cookie.zip' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
Boolean checkHost)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
Praveen | MCSE Messaging 2003When you add a new FE in pool acdpool1, please check you have run the following:
<system drive>\Program Files\Microsoft Lync Server 2013\Deployment\Bootstrapper.exe
For the details, check
http://technet.microsoft.com/en-us/library/jj204773.aspx
Lisa Zheng
TechNet Community Support -
MS14-055 security update for Microsoft Lync Server 2010
hello
after applying this security update do I need to Apply it to the back end database? or is that just when regular patches are applied?Hi totalnet32,
From http://support.microsoft.com/kb/2493736, we know that
"After you install the update for the Core Components server role on a Lync Server 2010 Enterprise Edition front end server, the updated SQL database files are dropped to the computer that has the Core Components server role installed.This
also applies to a Lync Server 2010 Standard Edition server. To apply the database changes, run the following cmdlets:
Install-CsDatabase -Update -ConfiguredDatabases -SqlServerFqdn <EEBE.Fqdn> -UseDefaultSqlPaths
2982388
(https://support.microsoft.com/kb/2982388/ )
MS14-055: Description of the security update for Microsoft Lync Server 2010 (Response Group Service): September 9, 2014
2982385
(https://support.microsoft.com/kb/2982385/ )
MS14-055: Description of the security update for Microsoft Lync Server 2010 (Security update for Standard/Enterprise edition Server): September 23, 2014
There's no Core Components server role update, as far as my experience, the DB update is not required.
And I suggest that reboot the Lync Servers once after the updates have been installed.
Best regards,
Eric -
Hi Guys,
We were trying to “Install the Mobility Service and autodiscover Service” on lync 2010 frontend server, for which we have downloaded the “McxStandAlone.msi” and placed in
“C:\ProgramData\Microsoft\Lync Server\Deployment\cache\4.0.7577.0\setup” location.
As per the document, to execute this we have to run the bootstrapper.exe from the lync powershell at the following location
“C:\Program Files\Microsoft Lync Server 2010\Deployment\Bootstrapper.exe”
But “Deployment folder and bootstrapper exe” are not present in mentioned location.
So is there any workaround for this ?
Thanks and Regards,
AnkitDid you happen to install Lync on another drive? Maybe D:?
Also try to run the Lync Deployment Tool and click "Install or Update Lync Server System" and rerun "Setup or Remove Lync Server Components". This should do the same thing as running the bootstrapper.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
OIM connector for Microsoft Lync Server
Experts,
Do we have any OIM connector for Microsoft Lync Server (previously Microsoft Office Communications Server)?
If not how can we integrate it with OIM for user provisioning ?
Please suggest.
Thanks,
S M.Hi,
Oracle doesn't have Lync connector . You can install the 11.x Exchange/AD connectors and after AD/Exch provisioning , you can write a task to execute your custom power shell which can set lync related attributes in AD/Exchange .
Hope this helps .
Regards
Suren -
Error Upgrading from the Evaluation Version of Microsoft Lync Server 2013
Hi,
I try to upgrade from Evaluation to full Version using:
http://technet.microsoft.com/en-us/library/gg521005.aspx
but after i run: msiexec.exe /fvomus server.msi EVALTOFULL=1 /qb
i get a popup:
"Another version of this product is already installed. installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel."
Get-CsServerVersion :-> Microsoft Lync Server 2013 (5.0.8308.0): Evaluation license key installed.
Any ideea?Hi Iulius
As your upgrading the Licence on the Lync 2013 FE it shouldn't care about the Lync 2010 Environment. As your moving from Eval to Full Licence on 2013. I have come across the below url that might help.
http://pei.com/2013/03/how-to-change-lync-license-from-evaluation-to-licensed/
http://jackstromberg.com/2013/02/how-to-activate-lync-evaluation-to-licensed-version/
I would personally go with from Lync Management Shell with Elevated Permission
cd /
cd /d: (Other what other drive letter)
cd /Setup\Amd64\Setup
msiexec.exe /fvomus Server.msi EVALTOFULL=1 /qb
But that's just me Id rather run the command from the directory than pointing to it.
Regards
Andrew Price -
Problems launching Microsoft Lync Server 2010 Control Panel
Just finished setting a new Lync 2010 environment. I was able to get passed some errors with the Archiving and Monitoring stores. I ended up removing those server roles to get the setup completed. Now, when I try launching the Microsoft
Lync Server 2010 Control Panel I get the following error:
Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly
'System.ServiceModel, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089'
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.TypeLoadException: Could not load type
'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel,
Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
If the Stack Trace is needed I will post, any help would be greatly appreciated in solving this error.
Thanks in advance,
HectorWere you playing with .NET versions at all?
https://support.microsoft.com/kb/2015129?wa=wsignin1.0
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Tandberg Codian MCU 4505 integration with Microsoft Lync server 2010
Hi,
We are trying to integrate Tandberg Codian MCU 4505 with Microsoft Lync server 2010.
We do not have any VCS in the setup.
If anybody has tried it before, please suggest configuration to be done on Tandberg Codian MCU 4505 and Lync server.
Regards,
RNHi,
so, i have the same environment. Lync 2013 and a cisco 1000V router on esxi with VRFs.
here is m config:
vrf definition Mgmt-intf
address-family ipv4
exit-address-family
address-family ipv6
exit-address-family
voice vrf Mgmt-intf
voice service voip
no ip address trusted authenticate
address-hiding
media disable-detailed-stats
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
bind control source-interface GigabitEthernet0
bind media source-interface GigabitEthernet0
listen-port non-secure 5066
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice class codec 2
codec preference 1 ilbc
codec preference 2 g722-64
codec preference 3 g711alaw
codec preference 4 g711ulaw
interface GigabitEthernet0
vrf forwarding Mgmt-intf
ip address 172.16.1.164 255.255.255.0
negotiation auto
dial-peer voice 15 voip
tone ringback alert-no-PI
numbering-type unknown
preference 1
destination-pattern 4.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.2.207:5068
session transport tcp
voice-class codec 2
dtmf-relay rtp-nte
dial-peer voice 17 voip
numbering-type unknown
preference 1
destination-pattern 7.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.1.32:5060
session transport udp
voice-class codec 2
dtmf-relay rtp-nte
gateway
timer receive-rtp 1200
sip-ua
keepalive target ipv4:172.16.2.207:5068 tcp
172.16.1.32 - Asterisk with a extensions on it.
172.16.2.207 - Lync 2013 mediation server with other extension on it
i can call from Asterisk extension via router and to Lync extension.
i cannot call from Lync to Asterisk.
TCP session with the router from Lync on port 5066 does not come up. three way handshake seems to come up.
strange. lync person seems to configured everything correctly
any thoughts? -
Download issue on microsoft lync server 2013
Error on clicking registration link while downloading lync server 2013 evaluation version. please help me from where i can download the lync server 2013 now.
http://www.microsoft.com/en-us/evalcenter/evaluate-lync-server-2013Hi
That link works fine, did you register at all as the sites requests? Once you have registered it will give you the option to download with a download manager.
Do you get this far?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Microsoft Lync Server 2013 Control Panel "Navigation to the webpage was canceled"
i'm facing this issue on the last 2 days.My Lync server 2013 was seted up a month ago and everything went fine on the installation.
Lync server 2013 on Windows 2008R2 SP1.
I could login to the Control Panel (using domain administrator credentials), create users (including myself) manage clients etc.
i didn't login to Lync server for at least a week, beacause i didin't have any other user to add. When time came to add a new user to Lync, i got this error whenever i try to open Control Panel.
i didn't change anything during this time, so i'm really confused by this.
i've checked everything from the start and all seem to be in place.
i also can't open the admin page from the local host as i get an error
HTTP error 403.4 - Fobidden.
i tried also to create new certificates for Lync server, but issue remains.
Also, any solutions i've read for this problem doesn't work as everything is placed correct as other users suggest.
Can anyone please help me further?
Cheers,
EliasOk I had the same problem, I missconfigured the admin simple url in topology builder (TB) which I fixed. Also the default certificate in the FE server did not have a SAN entry for the "admin" simple url (which was an error).
So I corrected the admin address in TB republised it, redid step two on the FE, reissued adn replaced the old cert. The new cert had the corrected admin simple url. Checked IIS on the server and made sure that the internal web server had the
right certificate, restarted IIS.
The default Lync control pannel still did not come up, I rebooted the server, the closest I got was being prompt for my credential which it did not accept.
Finally control pannel came up with https://localhost/cscp but I got prompted becuase of a certificate missmatch:
but it still worked!!! Very very wierd. I have not changed CA servers. I am interested about why this happened....
[email protected] BK
Bob Krangle -
Navigation to webpage was canceled when opening Microsoft Lync Server 2010 Control Panel
Ok, yes I know there are many threads with similar titles, but my problem is different in that it doesn't happen every time.
The first time I access the Control Panel I get the error:
"Navigation to the webpage was canceled
What you can try:
Refresh the Page"
Clicking Refresh the Page works, kind of. It brings up the admin console, but I get the spinning lights, which eventually resolves to an error at the top of the page that reads: "An operation failed. Network communication failed. Verify
your connection and try again."
Then if I click to other parts, things seem to be fine for the most part, I sometimes see the Network error, and often it is slow.
Port 443 is running through an HLB and this is setup exactly like my other Lync cluster, which doesn't have this issue. Internal web services URL is lynccontent and points to HLB VIP. Admin redirect is lyncadmin and points to HLB VIP.
Going to the /cscp page of each FE or of the pool from IE works every time, but lyncadmin seems to have the same issue (at least on FE1).
Any thoughts?Hi,
Could you perform the followings:
Make sure there're no duplicate records in the DNS Servers
Flush your DNS Cache at the Server & Client
Refresh any DNS Cache at the HLB (if any)
When the error appears, right click on the console and provide a screenshot on this
If you suspect that FE1 is the culprit, had you tried turning it off and monitor the situation?
Thanks!
James Ooi MCITP Lync Server 2010 | Blog: http://jamesosw.wordpress.com | Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread -
Microsoft Lync Server: Scheduled diverts to different numbers
"With increasing pressures on today's IT professionals to minimize resources while maintaining a high-performing infrastructure, virtualization has become a go-to option for a low-cost, power-saving solutions. (...) However, deciding what within your network infrastructure to virtualize, and how to actually do it, can be a challenge. (...)" via ITBusinessEdge
Read article online:
http://www.itbusinessedge.com/slideshows/the-five-dos-and-donts-of-virtualization.htmlWe think it's true, that ancient works great for magnificent skeletons in a museum, but it's terrible for your business web security.If you feel like learning more aboutCYREN WebSecurity(maybe you are looking to replace your current solution for something costeffective with less of a hassle) you are welcome to visit ourwebsite.
-
I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
"An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
Administrators
CSAdministrator
Domain Admins
Domain Users
Enterprise Admins
Group Policy Creator Owners
RTCComponentUniversalServices
RTCHSUniversalServices
RTCUniversalConfigReplicator
RTCUniversalServerAdmins
Schema Admins
I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcxds validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcxds validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is detached.
Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
Attaching database failed because one of the files not found. The database will be created.
State of database rtcxds is DbState_DoesNotExist.
Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
Clean installing database rtcxds.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcshared validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcshared validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcshared.
Reading database version for database rtcshared.
Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
Thanks and Regards,
Thanh LeThanks Lạc
Phạm 2
I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue.
If any one using KVM here is detail article
We just give this option cache=‘writeback
using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks -
Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
ThanksHi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you
Maybe you are looking for
-
I just bought the new MacPro 2012, why does the transfer of my files from my old MacbookPro to the new MacbookPro taking so long? It is taking over 2 days over the WIFi!! It is ridiculous! Why did Apple give up firewire? Maybe this is a complaint. Th
-
2 different battery life readings?
Im alittle confused here. im getting 2 different battery life readings. For instance, on the iphone(small battery on the top right of the screen) it shows around 40% charge left. When i connect it to my pc the big green bar shows up. but it shows tha
-
Movie Sync Issue on iPhone5, iOS6
I am new to the Apple Support Communities and first of all I want to say hello to everybody. But I have a huge problem with syncing HD movies to my device. Background: I have a small Bluray collection, which I copied to my HDD to convert them using H
-
How to turn the video on for skype use
When I am on skype, people can't see me. What do I have to do?
-
Why doesn't apple create an iCar?
You have the income, you have the connections. Worst case just get a merger with a car brand and continue steve jobs' extraoribary legacy.