Microsoft Mobile Services Protocol

Hi, Im wondering if RIM removed the msnmsp from live accounts.
I was with BELL and was able to change the protocol for my hotmail account from a POP to an MSNMSP. I liked the Microsoft Mobile Services Protocol because messages were delivered to my device promptly, now I have to wait about 15 mins top get email all my other email like yahoo, AOL and even my GoDaddy email comes in promptly.
Now i am with Telus and they fricken refuse to properly transfer me to RIM and they even lie to me saying that they dont have tier 2 support which I know they have because I looked into it and also found out that they can.

Ok, Problem resolved, but not with out LOTS of time, work and aggravation.
I started on the phone with AT&T, and they gave up after 30 minutes (though they were extremely polite...). AT&T then transferred me to RIM, and I ended up with a nice tech in Canada. Tech #1 went through all kinds of tests and could not fix the issue. AND - I did have to give him my password so he could try to setup my email account himself. He then transferred me to Tech#2, who was very knowledgeable, and fully understood my problem though he did not known how to fix it. We managed to get my MSN email address working as POP, but I told him that before I switched to MMSP, my MSN account was not POP, in so much as email to that address did arrive in realtime. He understood me, and we both keep trying and finally, he gave up, and said it would have to go to the main techs, who essentially work on the BB/RIM servers/backend. He promised me it would be setup in 48 hrs. So after nothing happened with in 48 hrs, I tried re-setting up my msn email myself, and it fully and completely works.
AND - as an added bonus, RIM must have slightly updated BIS, becuase now the Hotmail Contacts Sync actually works. YES, on my BB 9780, I am 100% syncing my MSN (Hotmail) contacts wirelessly.
So, to make a long story short, DONT SELECT "Switch to Microsoft Mobile Services Protocol"!!! If you do, and you email no longer works, you are going to have to speak with RIM, although you will need to call your carrier first and have them transfer you to RIM, so that way RIM will have your BB's PIN and can see exactly whats going on with your phone.

Similar Messages

"Microsoft Mobile Services Protocol" Problem

Hello everyone. 4 days ago, I checked my email accounts on my 9780 under Email Setup. On my primary email address, a "@msn.com" address, I noticed a new feature I had never seen or heard of before, called "Switch to Microsoft Mobile Services Protocol". I did a few minutes of research on what it was (it was suppose to convert my msn email from POP to IMAP, which would have been excellent...) and I then activated in from my phone. A few hours later and I realize that email address is not receiving new email, so I do the logical thing, and I delete the email address from Email Setup. Then, I try to create a new email account using the same @msn.com email address, and the system wont let me. Every time I do it from the phone, it gives me a error message saying "Update Failed". I have also tried to create the new email address from BIS online, and it also will not allow me to create a new email account for that specific email address.
I have verified that I can create new email accounts with other addresses, including other @msn.com addresses, but I just can not create one using my old (and most important) address that I had switched to Microsoft Mobile Services Protocol, and then deleted.
Does anyone know how I go about fixing this problem?
Many Thanks.

Ok, Problem resolved, but not with out LOTS of time, work and aggravation.
I started on the phone with AT&T, and they gave up after 30 minutes (though they were extremely polite...). AT&T then transferred me to RIM, and I ended up with a nice tech in Canada. Tech #1 went through all kinds of tests and could not fix the issue. AND - I did have to give him my password so he could try to setup my email account himself. He then transferred me to Tech#2, who was very knowledgeable, and fully understood my problem though he did not known how to fix it. We managed to get my MSN email address working as POP, but I told him that before I switched to MMSP, my MSN account was not POP, in so much as email to that address did arrive in realtime. He understood me, and we both keep trying and finally, he gave up, and said it would have to go to the main techs, who essentially work on the BB/RIM servers/backend. He promised me it would be setup in 48 hrs. So after nothing happened with in 48 hrs, I tried re-setting up my msn email myself, and it fully and completely works.
AND - as an added bonus, RIM must have slightly updated BIS, becuase now the Hotmail Contacts Sync actually works. YES, on my BB 9780, I am 100% syncing my MSN (Hotmail) contacts wirelessly.
So, to make a long story short, DONT SELECT "Switch to Microsoft Mobile Services Protocol"!!! If you do, and you email no longer works, you are going to have to speak with RIM, although you will need to call your carrier first and have them transfer you to RIM, so that way RIM will have your BB's PIN and can see exactly whats going on with your phone.

Microsoft Outlook Mobile Service Address

Hope I can explain something I don't understand.I've read Microsoft Outlook has a feature called Outlook Mobile Service that allows me to send SMS to my cell. To accomplish this I apparently need a web service address supplied by my carrier. How do I find my web service address?

Hi
You can always send an email to a cell phone as SMS or MMS by using these email formats:
[email protected]
[email protected]
For example, if I want to send SMS to number 123-456-7890, I will type [email protected] in the "To" email field.
Is that what you're looking for? Looks like there are some paid third party sms server options that can be used with Outlook, but I'm not familiar with that and don't believe AT&T offers anything like that.
Thanks,
Dmitriy

Microsoft mobile verification service not upto the mark.

Well I am a user of Windows phone and have been using a live Id which was used when I bought the mobile. Now I am in a fix because microsoft wishes me to verify my account and the recovery through email is not possible as email entered has a tragic blunder
of having extension as .vom instead of com. I have tried recovery via phone that does not work. Now as a consequence I need to reset my phone.
I have no means to save my contacts & apps.All said and done I try to make a new Outlook ID putting information very carefully as next steps a verification needs to be made via phone and that does not work at all.
Now I wish to ask is there any means by which I can save my contacts on phone & why do I have to be the sufferer because of a failed Microsoft Mobile verification system.
Please advise proper corrective actions.

Hi,
By default, the phone will back up all your contacts, apps, messages, and most settings into the Cloud. If you loose access to your MS account for some reason, then try some Apps which allow you to back up your contacts manually:
http://www.windowsphone.com/en-us/store/overview
Also, this is the forum to discuss questions and feedback for Microsoft Outlook client based on Windows, better to post your question to the forum for Windows Phone:
http://answers.microsoft.com/en-us/winphone
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks,
Ethan Hua CHN
TechNet Community Support

How to Use Mobile Service in HTML/JavaScript Application

The Windows Azure Mobile Service is a back end tool for mobile applications. It supports various platforms, such as Windows Store, Windows Phone 8, iOS and Android. The Windows Azure
Mobile service can also support HTML/JavaScript. This article helps you to get a basic idea of how to use the Windows Azure Mobile Service in HTML/JavaScript applications.
Let us start with a Quick startup project provided by Microsoft. A Quick startup is a simple demo project that can help us to understand how to use the Windows Azure Mobile Service with HTML/JavaScript. So let's start from the Quick startup project.
Login into in the Windows Azure portal and use the following procedure.
This article assumes you already have a Windows Azure account and the mobile service is enabled in your account.
1. Create a new Windows Azure Mobile Service
Click on the +New button from the left corner and select Compute -> Mobile Service and then click on the "Create" button.
The Windows Azure portal popup creates a mobile service wizard when you click the Create button. Windows Azure asks you to enter the mobile service name as shown in the following image:
Select the database options and region for your mobile service and click on the "Next" button.
Once your mobile service is successfully created, the portal will show all your mobile services as shown in the following images.
Ok! We have created a new mobile service successfully. Let's move to our subsequent steps.
1. Quick startup Project
As we all know, the Windows Azure Mobile Service can support many platforms such as Windows Store, Windows Phone 8, iOS, Android and HTML/JavaScript. This article only tells us about the new HTML/JavaScript platform that is recently added to the Windows Azure
Mobile Service.
In the image above, we are in the quick startup page where the Windows Azure Mobile Service allows the user to choose their platform. I have selected the HTML/JavaScript Platform.
In the image above, we found 3 quick steps that can allow us to run <g class="gr_ gr_74 gr-alert gr_gramm Grammar" data-gr-id="74" id="74">a HTML/JavaScript</g> sample project.
1. Create Table: In this step the user needs to create a table that can used by the sample project, once you hit the create TodoItem Table button. The Portal will create a TodoItem table in your mobile service. You
can check this table by clicking on the data tab(menu).
2. Download and run your app: In this step the user needs to download the Quick startup project that is provided by the Windows Azure portal. Click on the "Download" button and download the project. You will
see the following files in the quick startup project.
The Server folder contains some files to setup this project locally. The user should run the file from the server folder corresponding to their OS. I am using Windows OS so I ran the <g class="gr_ gr_80 gr-alert gr_spell ContextualSpelling ins-del multiReplace"
data-gr-id="80" id="80">lanch</g>-<g class="gr_ gr_79 gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="79" id="79">windwos</g> file to setup this project locally in
IISExpress.
Press r and enter the key, you will see IISExpress started. Do not close this Windows and open your browser and request the http://localhost:8000/ page.
Enter the Item name and click on the add button. Your Item will be added to the TodoItem table.
3. Configure your host name: This step is a very important step for any HTML/JavaScript application that uses the Windows Azure Mobile Service. In this <g class="gr_ gr_83 gr-alert gr_gramm Punctuation only-ins
replaceWithoutSep" data-gr-id="83" id="83">step</g> the user must register their website name in the Cross-origin resource sharing (CORS). By default, "localhost" is added by the Windows Azure Mobile Service
so your quick startup project can run without making any CORS setting changes. The user can add their website domain name by clicking on the configure tab (menu).
The user can add as many website domain names as needed.

are you asking a question or did you just post a tutorial here? you might want to post it as a blog post or wiki entry instead.

System.Web.Services.Protocols.SoapException When Accessing Reporting Services

Hi. I have inherited a client's mission critical database + SSRS project that I am attempting to migrate from 32-bit SQL Server Express 2005 + SSRS on a Windows Server 2003 to 64-bit SQL Server Express 2008 R2 + SSRS on a Server 2012 R2 Essentials.
While I am not skilled in SQL Server I am having to learn quickly(!) and have managed to migrate the database and web application (with little change, apart from the web.config) and it is working fine. I have also migrated the SSRS database and can open
the Report Manager and generate reports OK.
However, the database's web application fails with a "Server Error in '/' Application" when it is used to generate a PDF report, with this exception:
System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render
(full text of error message given below).
My research has thrown up a few references to this, with the suggestion of changing the SSRS endpoint used by the code from ReportService.asmx to ReportService2010.asmx. This does not help, though, and neither does using the ReportService2005.asmx or ReportExecution2005.asmx
endpoints.
If I open the endpoint directly in a web browser using http://<ip address>:<port>/ReportServer/ReportService2010.asmx then it displays a sensible-looking XML document tree (but no associated style info).
I'm not really sure about where to go from here. Can anyone help?
PS: Here's the full error page referred to above:
Server Error in '/' Application.
System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render.
at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest()
at System.Web.Services.Protocols.SoapServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response)
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render.
at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest()
at System.Web.Services.Protocols.SoapServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response)
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render.
at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest()
at System.Web.Services.Protocols.SoapServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response)
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +413241
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +300
AuditecSite.ReportService.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds) +203
AuditecSite.RenderToPDF.RendertoPDF_PreRender(Object sender, EventArgs e) +1040
System.Web.UI.Control.OnPreRender(EventArgs e) +11143742
System.Web.UI.Control.PreRenderRecursiveInternal() +108
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3394
Version Information: Microsoft .NET Framework Version:2.0.50727.8009; ASP.NET Version:2.0.50727.8010
Steve.

Hi
Check SAP Note 701467 for error CX_INVALID_TRANSFORMATION
SAP Note 773330 Incorrect exception for CALL TRANSFORMATION
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_aba/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373031343637%7d
Refer this link too
CALL TRANSFORMATION
may get some help
Regds
Nidhi

Microsoft Reporting Services

Hi
We are using SQL 2005 as a database for PCM v12.1 and plan to upgrade to PCM v13 SP1.
Has anybody using Microsoft Reporting Services for preparing reports ?
could you please guide on the same ? How good it is ? Is it easy to prepare report (in comparison to Infomaker) ? (i know it can not be shown like infomaker report within CM)
Please give your suggestions.

I simply find infomaker a bit stiff and not that user friendly.
examples of reports in a big summary:
- sysadmin > all reports if something is wrong (like some custom fields are not filled in, or one person approved as another user, etc).
- construction reports > field force (to trace or by site/project or by subcontractor history of workforce based on daily reports), some audit of new revisions of drawings, new transmittals etc
- communication > Report of minutes of meeting to trace by responsible person from our team and/or contractor what are the current issues, if there are any new notices, any letters (which we barely use);
- project review > each projects financial details - how much was contracted, changed, protocoled all in accordance to what was budgeted (on contract and/or items level);
- management reports > status with KPIs of all projects with devision into cost splits and cost per net m2.
what reports are you thinking of? Perhaps we could share some ideas.
If migrating to Oracle you will just have to change the data sources and if you are using some custom views () you will have to change the way its generated. It shouldn't be a lot of work.

SQL connection errors when stress testing mobile service: SQL failure after 3 attempts

I have created a Mobile Service (node.js), which has been running for a few months with 50-100k api calls per day with no issues.
The usage of the service will be scaled up soon, and it will receive much higher traffic, so I am running stress tests (on a staging deployment of the same service).
The api in question queries data from the sql database that is attached to the mobile service, but caches the resulting data in a redis database for 5 minutes, so each call with identical parameters will not access the SQL database, just the redis cache.
My first test never has any problems:
Run a single api calls as fast as possible using the program wrk (https://github.com/wg/wrk). This test never has a problem, and I have run it an hour continuously with a sustained rate of 200 req/s and very few timeout errors.
The second test always causes problems:
I created a list of 5 different api calls to the same service (same endpoint, but different parameters), and I run those randomly interweaved as fast as possible. I use the program locust (http://locust.io) for this, spawing 10.000 clients at a rate of 500
per second. For the first few seconds everything goes ok, but then connections start failing massively.
I get mostly:
Error: SQL failure after 3 attempts. Error: [Microsoft][SQL Server Native Client 10.0]TCP Provider: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond.
(SqlState: 08001, Code: 10060)
And I see this in the http response:
ConnectionError(ProtocolError('Connection aborted.', gaierror(8, 'nodename nor servname provided, or not known')),)
The strange thing is that since I am running the same five calls repeatedly, only the very first of each call will actually access the sql database, every subsequent call will just return data directly from redis, and not try to access the sql database at
all.
In the azure console for the sql database in question, I see 1860 successful connections and 11 failed connections, which does not explain the massive failure rate I am seeing.

Thanks for sharing your tips on this forum, as it will be useful for other users, that run into this issue.
Feedback like this will also help us improve error reporting in the next release, as missing class files in the packaged application is a common issue when developers are moving from the embeded oc4j instance packaged with JDewveloper to standalone instances.
-Eric

Azure AAD Mobile Service Authentication with corporate accounts fails.

I have been having on-going issue with Authenticating against a Windows Azure mobile service with corporate accounts.
Here is the complete environment.
Initially we set up with Office 365 / CRM Online / and Azure for our corporate infrastructure. We have set up single sign on. Everything works well. There is ADFS set up and running to allow us to Authenticate with {username}@{companyDomainName} and everything
works, including single signon.
Along comes Azure Active directory. We have an Automatically created Azure active directory in the corporate azure account. The domain is the default created {accountname}.onmicrosoft.com domain structure. This is set as the Default directory.
We had a consultant come in, who was organized through Microsoft, to do some work. After everything was set and done we ended up with another active directory created in Azure that is named with the corporate domain name. This second domain has had all of
the corporate accounts synched to it.
I have now created an Azure Mobile Service. The service is a basic service, I haven't updated any of the code yet, except to publish the service. I have followed all of the configuration instructions for setting up the authentication.
If configure the Authentication to point at the first active directory, I am able to Authenticate against the service using the credentials for a user that has been created in that domain. The Authentication works correctly, and goes through.
However if I switch the configuration to use the second Active Directory, the one with the corporate accounts synched to it, the authentication fails. I am able to enter my corporate email address into the web page that is presented. Then the web control
started to call into the ADFS in order to authenticate the corporate user name and password. At this point the authentication fails with a message about the service not being available.
The login code is the standard:
user = await App.MobileService.LoginAsync(MobileServiceAuthenticationProvider.WindowsAzureActiveDirectory);
The project is a Universal Application as the service needs to be available from both a phone and a desktop. The project was started from the starter project downloaded form the Mobile Service site.
# Update
I've just switched the mobile service configuration back to use the AAD with the corporate accounts synchronized. The login through the application fails. However if I log in through IE by browsing to : https://{ServiceName}.azure-mobile.net/login/aad
The authentication goes through correctly.

A few questions on the details:
What client platform are you using for login. In particular, is this a Windows Store application?
What do you mean exactly by "authentication fails?" Does an error get thrown, or does the UI just hang?
Is this being done from a domain-joined machine and/or on a machine connected to a corporate network?
We have seen an issue where some configurations of ADFS will not play nicely with Windows Store apps since the Web Authentication Broker (WAB) is based on the IE browser, and ADFS will attempt to do SSO in the special IE way instead of presenting a form,
etc. Unless the WAB is configured to handle this scenario, you will get a non-responsive UI.
Any details you can provide would be helpful.

Microsoft Sync Services problem with Entourage (calendar)

Out of the blue, when I open Entourage, I get a dialog box: Microsoft sync services has encountered a problem.
I've isolated it to Calendar in Entourage. I cannot open my calendar. Email works, contacts work - but the error message pops up when I click on calendar.
I've tried to reset sync services through iSync and with a line item in Terminal (/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsy nc.pl reset)
I 'was' using MobileMe - with calendar & contacts (only) synched, but I un-synched them.
Any ideas?
Thanks!

Ever since I installed Snow Leopard, i get a random error message that sync services has quit, and do you want to send to Microsoft? I always select yes and as of now I have sent more than 160 report messages. This generally happens about twice or three time a day. Some days, the total Entourage quits and has to restart. I do not have the specific problem you describe as calendar works most of the time, but the sync services crash happens randomly. I can find no one who can explain why with Snow Leopard and not with Leopard. Going to Microsoft for a solution is not the answer, as I can find no one there to talk to for free. I use iCal and Mobile Me for my synching, but use Entourage as my e-mail program as I am used to it. I also have sync services active so my Entourage calendar will be up to date, but I make no entries into it.

Authentication using Mobile Service

I added mobile service to my mvc web project using nuget(1.3.1).I also registered mobile service in azure portal and linked with facebook.Now my problem is that when i tried loginasync method ,it asking for token and provider name and i could not get the
extension method(Microsoft.WindowsAzure.Mobile.Ext ) where it asks for only provider name? Is this an issue with nuget? Also I would like to know from where we get the token?

Take a look at the sample on
how to add authentication to mobile services app.
Abdulwahab Suleiman

Using offline data sync in Mobile Services

Hi All,
I am working on offline data sync in Mobile Services . Followed the below URL
http://azure.microsoft.com/en-gb/documentation/articles/mobile-services-windows-store-dotnet-get-started-offline-data/#enable-offline-app
Have an issue at store.DefineTable<TodoItem>();
when i run the method i am getting any exception as
System.ArgumentException was unhandled by user code
HResult=-2147024809
Message=An item with the same key has already been added.
Source=mscorlib
StackTrace:
at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at System.Linq.Enumerable.ToDictionary[TSource,TKey,TElement](IEnumerable`1 source, Func`2 keySelector, Func`2 elementSelector, IEqualityComparer`1 comparer)
at System.Linq.Enumerable.ToDictionary[TSource,TKey](IEnumerable`1 source, Func`2 keySelector, IEqualityComparer`1 comparer)
at Microsoft.WindowsAzure.MobileServices.SQLiteStore.MobileServiceSQLiteStore.DefineTable(String tableName, JObject item)
at Microsoft.WindowsAzure.MobileServices.SQLiteStore.MobileServiceSQLiteStoreExtensions.DefineTable[T](MobileServiceSQLiteStore store, MobileServiceJsonSerializerSettings settings)
at Microsoft.WindowsAzure.MobileServices.SQLiteStore.MobileServiceSQLiteStoreExtensions.DefineTable[T](MobileServiceSQLiteStore store)
private async Task InitLocalStoreAsync()
if (!App.MobileService.SyncContext.IsInitialized)
var store = new MobileServiceSQLiteStore("localstore.db");
store.DefineTable<TodoItem>();
await App.MobileService.SyncContext.InitializeAsync(store);
await SyncAsync();
Need help.
Thanks,
Sai.

Hi,
The Azure Mobile Services forum is here:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=azuremobile&filter=alltypes&sort=lastpostdesc
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

System.Web.Services.protocol.SoapHeaderException

I created a web service using java, with NetBeans 5.0. I used sun application server. Then I create Microsoft C# web service client in order to connect to the java web service. When I connect it I got following Exception called , System.Web.Services.protocol.SoapHeaderException. JAXRPC Internal Server Header
Please give some idea to resolve this exception.
My Email is : [email protected]

Ok, from the looks of it you're calling the web service from within an SSIS package. Are you able to call the web service in a stand-alone C# console app and is the error just occurring in the SSIS package or not? If it occurs in both situations, continue
development in in the C# console app as this will make debugging easier. Also, in order to help you further, are you calling a web service under your control or not, and is the web service a WCF service or not?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

System.Web.Services.Protocols.SoapHeaderException error in script task

HI,
My requirement is I have to create a XML of each row from a table and push one XML data of each row to a web services. This is a syncronous call to web services where it will send the response of each row XML.
The WSDL file is having a method called MATCHXML having 4 parameters namely ControlXML, BatchXML, Username, Password. I have created the ControlXML & BatchXML through code and storing into a string variable seperatly. The WSDL alos contains 4 input called
RequestUUID, ChannelID, ServiceRequestID & ServiceRequestVersion which has to be send to web services compulsory along with the method. In order to implement this, first I have added Web reference of the Web service URL into library, then invoked the method
to hit the web services. The code looks likes as below:
//Initiated an object of the class from the WSDL file
Matching match = new Matching
string result = match.MatchXML(controlXML,BatchXML,Username,Password)
Then, at the above line it display the below error:
SSIS package "HunterAutomation.dtsx" starting. Error: 0x1 at Generates XML file & Update variable: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Web.Services.Protocols.SoapHeaderException:
Mandatory field is not set in EAI_SOAPINPUT; Element -> Environment.eaiCommon.BTID, Environment.eaiCommon.Header.ChannelID, Environment.eaiCommon.Header.RequestUUID, Environment.eaiCommon.Header.ServiceRequestId, Environment.eaiCommon.Header.ServiceRequestVersion
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ST_ae3b1e5eadb64fdba5040f4efa743458.csproj.Hunter.Matching.Match(String controlXml, String batchXml, String username, String password) in C:\Users\CPUTRACKINGAPP\AppData\Local\Temp\3\SSIS\377534961d7f4fdb91565f9366317fdc\Web References\Hunter\Reference.cs:line
93 at ST_ae3b1e5eadb64fdba5040f4efa743458.csproj.ScriptMain.Main() in C:\Users\CPUTRACKINGAPP\AppData\Local\Temp\3\SSIS\377534961d7f4fdb91565f9366317fdc\ScriptMain.cs:line 1307 --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(Object
target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle
typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr,
Binder binder, Object[] parameters, CultureInfo culture) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture) at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript() Task failed: Generates XML file & Update
variable Warning: 0x80019002 at For Loop Container: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. Warning: 0x80019002 at HunterAutomation: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised
(1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "HunterAutomation.dtsx" finished: Failure.
In order to solve the issue i have manual created the soap header code. Now Im not understanding how to send the soap header XML message along with the MATCHXML method. I am trying very hard to solve the issue from last 3 weeks but NO LUCK.
Could anyone please help me out on this and I'm already running out of my deadlines.

Ok, from the looks of it you're calling the web service from within an SSIS package. Are you able to call the web service in a stand-alone C# console app and is the error just occurring in the SSIS package or not? If it occurs in both situations, continue
development in in the C# console app as this will make debugging easier. Also, in order to help you further, are you calling a web service under your control or not, and is the web service a WCF service or not?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

System.Web.Services.Protocols.SoapException: CX_INVALID_TRANSFORMATION

Hi all,
i have a problem with a service.
In the "old" systems WITHOUT Soamanager the service works fine.
Now the service throws the following exception:
System.Web.Services.Protocols.SoapException: CX_INVALID_TRANSFORMATION:An exception with the type CX_INVALID_TRANSFORMATION occurred, but was neither handled locally, nor declared in a RAISING clause.The transformation /1BCDWB/WSS0071002102836497005 could not be executed at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at C9X.ZWS_PASSWORD.ZUResetSapPassword(ZUResetSapPassword ZUResetSapPassword1) in c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\ajaxenabledwebsite1\155921d1\5360ddf9\App_WebReferences.mlueh3hc.4.cs:line 49 at _Default.ResetUserPasswd(String sapUserName, String eMail, String sapLanguage, String sapSystem) in c:\AJAXEnabledWebSite1\Default.aspx.cs:line 326
I have configured the logical port in soamanager and i can't find the error....
Any ideas?
regards

Hi
Check SAP Note 701467 for error CX_INVALID_TRANSFORMATION
SAP Note 773330 Incorrect exception for CALL TRANSFORMATION
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_aba/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373031343637%7d
Refer this link too
CALL TRANSFORMATION
may get some help
Regds
Nidhi

Microsoft Mobile Services Protocol

Similar Messages

Maybe you are looking for