Microsoft Office Communicator 2007 R2 Client
Hi,
Wanted to know how to install the Microsoft Office Communicator 2007 R2 Client on Blackerry Bold 9700 v5.
Please advice.
Please ask over here:
http://social.microsoft.com/Forums/en-US/home?category=officecommunicator
Good luck!
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com
Similar Messages
-
Microsoft Office Communicator 2007 R2 Trial to full version
Hi All,
I was using Microsoft Office Communicator 2007 R2 Trial and it has been expired now. what is the procedure to get it renewed or extended to continue using it. I have installed office 2013 licensed but its lync is not supporting with server version. I have
no option otherthan to continue Microsoft Office Communicator 2007 R2. Please suggest on this situation.
-MadhuPlease ask over here:
http://social.microsoft.com/Forums/en-US/home?category=officecommunicator
Good luck!
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
OCS 2007 R2 Patching problem - Microsoft Office Communicator 2007 R2 Hotfix KB 2755391
Hi,
Unable to patch Hotfix KB 2755391 in Microsoft Office Communicator 2007 R2.
The following error occurred when started the installation of communicator.msp package file
"Windows Installer: The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. verify that the program to be upgraded
exists on your computer and that you have the correct upgrade patch"
Any one have idea? how to install this package successfully?
Please help
MDHi,
Which version did you OCS 2007 R2 install?
Which language the Hotfix KB did you want to update? Did it the same with the language before? If the language different from before, please download the correct language Hotfix KB and then test again.
Please also update Windows Installer to the latest version.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
URGENT: Microsoft Office Communicator 2007 R2
Hello Guys, it will be great if anyone of you can reply to my below question, I need answer urgently. Please
On Microsoft Office Communicator (OCS) 2007, I have the following questions:
Are the chats saved on local machine (at client end) or are they saved on the server?
If one of the two participants in the chat conversation has quit the organization, what is the way to retrieve it? Essentially, whose name comes in the 'From'
section in the saved conversation - is the person initiating the conversation or is there some other criteria? For example: Can
it be like below chat conversation?
From: Surname2,
Firstname2 [[email protected]]
Sent: Thursday, September 29, 2011 3:56 PM
To: SURNAME1 FIRSTNAME1; Surname2, Firstname2
Subject: XYZ
Surname1, Firstname1 [06:22]: Hi
Surname2, Firstname2 [06:22]: HelloPlease ask over here:
http://social.microsoft.com/Forums/en-US/home?category=officecommunicator
Good luck!
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
How to provision Microsoft office communicator 2007 using OIM?
Not sure if AD or Echange connector have this capability. Is there any script?I'd ask the experts over here.
http://answers.microsoft.com/en-us/office/forum/office_2007-outlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1390268122725
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
URGENT: Microsoft Office Communicator (OCS) 2007
Hello Guys, it will be great if anyone of you can reply to my below question, I need answer urgently. Please
On Microsoft Office Communicator (OCS) 2007, I have the following questions:
Are the chats saved on local machine (at client end) or are they saved on the server?
If one of the two participants in the chat conversation has quit the organization, what is the way to retrieve it? Essentially, whose name comes in the 'From'
section in the saved conversation history - is the person initiating the conversation or is there some other criteria? For example:
Can it be like below chat conversation?
From: Surname2,
Firstname2 [[email protected]]
Sent: Thursday, September 29, 2011 3:56 PM
To: SURNAME1 FIRSTNAME1; Surname2, Firstname2
Subject: XYZ
Surname1, Firstname1 [06:22]: Hi
Surname2, Firstname2 [06:22]: Hello"Are the chats saved on local machine (at client end) or are they saved on the server?"
Chats can be saved in the conversation history folder of the Exchange inbox. They can also be archived to a separate SQL server if this was configured in OCS. Whether they're kept "locally" or not depends on if cached mode was enabled
for Outlook or if they exported to PSTs.
"If one of the two participants in the chat conversation has quit the organization, what is the way to retrieve it? Essentially, whose name comes in the 'From'
section in the saved conversation history - is the person initiating the conversation or is there some other criteria? For
example: Can it be like below chat conversation?"
If we're talking about conversation history in Outlook, it might say "Conversation with [other person]".
It's not so much from anyone, as it contains participants. If it's in SQL, because you enabled archiving and it hasn't been purged, then they will be individual messages to each other, so you'll search both from and to. You may be able to retrieve
it from Exchange, if the mailbox exists and they haven't deleted it, or from backups.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Office Communicator 2007 R2 Mobile Client for Java
I have installed the Office Communicator 2007 on my E72. When I try to login, the clients logs in and then immediately returns to the login screen. You can see the post login screen for a moment before it comes back to the login screen. It was same on E71 that I owned earlier. Backend is OCS 2007 and CWA is enabled. I have the correct login credentials and settings.
Will appreciate any comments / suggestions on how to make it work.
Thanks.Are you sure the E72 is supported? http://office.microsoft.com/nl-nl/help/HA102027021043.aspx
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Vbscript Execution in Microsoft Office Communications Server 2007 Speech Server.
I am trying to add a Speech Server Application through Code using Vbscript in Microsoft Office Communications Server 2007 Speech Server. Below is Vbscript.
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\MSSV2")
Set objPeerClass = objWMIService.Get("Application")
Set objPeer = objPeerClass.SpawnInstance_()
objPeer.Name= "ApplicationOne"
objPeer.Put_
wscript.echo "Created Application= " & objPeer.Name
Above Script gives Error Number 80041031. Please help me to remove this Error.Here are the docs for scripting Speech Server:
http://msdn.microsoft.com/en-us/library/bb800709(v=office.12).aspx
Example:
' Get MSS object on specified host
strHostname = "."
Set objMSS = GetObject("winmgmts:\\" & strHostname & "\root\MSSV2:MSS=@")
' Print configuration summary
For Each p in objMSS.Properties_
If p.IsArray Then
If isNull(p.Value) Then
Wscript.Echo p.Name, "="
Else
Wscript.Echo p.Name, "=", Join(p.Value)
End If
Else
WScript.Echo p.Name, " = ", p.Value
End If
Next
objMSS.Properties_("ShutdownTimeout")=300
'Update WMI with a modified instance
objMSS.Put_
Post future questions to Speech Server (Office Communicator) forum.
¯\_(ツ)_/¯ -
Office Communicator 2007 (OCS)
For Microsoft Office Communicator (OCS) 2007, I have the following questions:
Are the chats saved on local machine (at client end) or are they saved on the server?
If one of the two participants in the chat conversation has quit the organization, what is the way to retrieve it? Essentially, whose name comes in the 'From' section in the saved conversation - is the person initiating the conversation or is there some
other criteria?
Will the name format in the saved log in 'From' differ from the format used in the chat conversation? Essentially, will the capitalisation or the layout (i.e. ''SURNAME1, FIRSTNAME1" instead of "surname1, firstname1")
of the names change highlighted below? For example:
From: SURNAME1, FIRSTNAME1 [[email protected]]
Sent: Thursday, September 29, 2011 3:56 PM
To: SURNAME1 FIRSTNAME1; Surname2, Firstname2
Subject: XYZ
Surname1, Firstname1 [06:22]: Hi
Surname2, Firstname2 [06:22]: Hello
What is the relation between the time of the last chat message shared with the time mentioned in the 'Sent' section of the saved message log? Can these two times differ based on the time zones, i.e. if saved message log is of different time zone and time
of last message sent/received is the local time zone?Hi,
Which version did you OCS 2007 R2 install?
Which language the Hotfix KB did you want to update? Did it the same with the language before? If the language different from before, please download the correct language Hotfix KB and then test again.
Please also update Windows Installer to the latest version.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Office Communicator 2007 "There was a problem verifying the certificate from the server" issue
Hello,
Last Friday is when this error first started. This is effecting all users. I am new to this position and am unfamiliar with how the Communicator server is setup. I am unsure as to where to look and where to start. We are using Office Communicator 2007 R2
running on a VM with Server 2003 R2. This is the only application being used on this host. Any ideas on where to start looking?
Thanks for the helpHi Jenebo,
Looks like you did not install the CA install your client PC.
Access you enterprise CA server, like
http://dc.server.com/certsrv, download the certificate chain and intall it.
If it still can not work, please check you use automatic configuration to login your ocs client and you can resolve the SRV record to correct srv hostname using Nslookup.
If you use manual configuration, please do not use IP address of of FE.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I issued a certificate off of the server running OC 2007; I do not have a dedicated CA server. How would I pull the crtificate off of that server and install it on my clients (server name is SFBlackberry)?
By the way, half of the clients worked after I renewed the CA on the server and the other half are the ones I am having problems with.
Thanks for your help...as you can tell I am new to OC and really appreciate your help. -
Microsoft Office Ultimate 2007 - Activation after hardware change
Have an original Microsoft Office Ultimate 2007 software which is licenced for 3 computers.
In the past had it up and running OK on a Hewlett Packard PC and a Samsung Netbook.
When I made some changes to the PC early last year it asked me to activate again, and the process worked OK and was carried out online.
A few months ago my PC crashed, so I took the harddrive out of the PC and inserted it into the shell of another old HP PC, which resulted in me having to activate it again.
Now (while abroad) my Netbook crashed and I took out the harddrive and installed it in to the shell of an old Samsung Laptop.
It is now asking me to activate, however when I try it says I exceeded the number of permitted installs (which rubbish, as they not copied on to new computers while left on the old ones but physically still on the same drive, even if totally different motherboard
etc)!
As it won't activate online it gives an option of activating by telephone, but if you select this option in the wizard the wizard disappears and no list of contact numbers appears.
Obviously trying to call back to the UK to speak to a UK call centre would be costly and even if I get to a person how do I enter the code (that I have) if the wizard is not open to key it in to?
If I call a local number the support will be in Estonian or Russian rather than English and can they support a UK purchased software rather than locally purchased one?
It is a real pain!
Makes you want to switch to OpenOffice!
Can any of you email me at mueller at tesco dot net and tell me what I can do?
Being out of work at the moment I can not afford to upgrade to the latest version, and my son needs to use Office on this laptop for his schoolwork.
I can give you my AAAAA-AAAAA-NANAA-NANAA-NAAAA type activation code if you need it but thought it best not to post it on an open forum.
Thanks, Regards, RichardHello Bhatt,
Most probably your PC was corrupted by the Dell software you downloaded. First of all, I'd recommend contacting the Dell support service representative. Also you can try to re-install Office.
Finally, I'd recommend asking such question on the
Microsoft Community forum instead. The current forum is for Office developers. -
BB Browser compatibility with Communicator 2007 Web Client
I need to use the BB Browser to access a Communicator 2007 web client. After entering the URL, the device requests/runs scripts and when the progess bar completes, briefly flashes "loading" and loads a blank screen. Other folks can use this URL with an iPhone, any hope of getting this to work on the BB?
Hi,
From Lync Online document, Lync Online support Lync 2010 and 2013 desktop client. But not mention OCS 2007 R2 client.
More details:
https://technet.microsoft.com/en-us/library/dn194468.aspx
The forum you posted is for Lync Server On Premise only. The issue is more related to Lync online, you can also post a question on Office365 forum for assistance. Thank you for your understanding.
http://community.office365.com/en-us/f/166.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Hi,
When I try to open a Infopath related file from Sharepoint, I am receiving the below error.
This form template is not currently browser-enabled. It must either be republished as a browser-enabled form, or opened using Microsoft Office InfoPath 2007.
Office Professional Plus 2010 and Infopath 2010 are installed in my Windows 7 Enterprise edition. Have executed ""C:\Program Files\Microsoft Office\Office14\InfoPath.exe" /cache ClearAll" the command. But still getting the same error.
It works in different machine. Repaired Office 2010 and Infopath.
Please let me know if any solution available.
Regards,
Boopathi SHi,
You can try Amit Bajaj's method in another thread which has fixed the same problem for several users:
Check if the default “Form Templates” option in appearing under “View all site contents” page. If it is not enabled by
default, then you can follow this following steps.
If "Office SharePoint Server Enterprise Site Features" is enabled but we don't see the default "Form Templates" on the "View
all site contents" page, then you should use the following steps.
Make sure they have backup of everything.
Opened the site http://<your site url> in SharePoint Designer.
Select the root URL and click FILE >> NEW >> SharePoint Content
Choose Document Library >> Form Library
Under options type the name as “FormServerTemplates” and it will create the content.
Now right click on “FormServerTemplate” and open “Properties”
On settings Tab change the name to “Form Templates” and uncheck the option “Use a template for new documents”
Click OK
Now you should see “Form Templates” on the view all site content page.
You should be able to publish the InfoPath form with "Enable this form to be filled out by using a browser."
Reference:
https://social.msdn.microsoft.com/Forums/en-US/c9617953-a54c-44ec-86cf-df215c750c18/this-form-template-is-browsercompatible-but-it-cannot-be-browserenabled-on-the-selected-site?forum=sharepointcustomizationlegacy
Since this issue is more related to SharePoint, if above steps doesn't resolve the problem, I'd recommend you post your question in the following forum for further assistance:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=sharepointcustomizationlegacy
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]. -
When I click a link inside Microsoft Office Outlook 2007, it results in a "General Failure" message instead of loading the link inside Firefox 7 (previous versions of Firefox loaded OK, this issue has only arrived with the recent upgrade).
See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html -
SCCM 2012 How to gerenrate reports Microsoft Office 2003, 2007, 2010
I need an sql query to generate a report that includes Microsoft Office 2010, 2007 and 2003 only.
You can either built a custom report with Installed applications (microsoft office%) or take a look at the readymade reports from enhansoft - I just installed some of them earlier today and they have Office reports builtin -
http://enhansoft.com/
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals
Maybe you are looking for
-
Unable to find oracle.apps.ibe.customer.AddressBook class in R12
Hi, We are implementing iStore R12 for our client. They have iStore 11i already implemented. In 11i they were using a custom jsp which is using following seeded java classes: oracle.apps.ibe.customer.AddressBook oracle.apps.ibe.customer.FlexibleAddre
-
I have ver 10.5.8 with 4Gb of memory, can I upgrade to snow leopard?
I have a Mac Pro running version 10.5.8 with 4Gb of memory, can I upgrade to snow leopard? My info is: Processor 2x2.8 Ghz Intel Memory 4GB but when I saw the upgrade for Snow Leopard it said something about needing 5GB? I'm not the best with tech s
-
When I attempt to add a new key frame into the timeline it adds several frames to my animation
I am trying to edit an FLV file with flash professiona. Right now every frame is on long frame sequence, meaning that right now there is only one key fram in the entire 40 second animation. I am trying to add put key frames at various points in my
-
Old Pro Stumped... When I click on the Photoshop Icon it turns off my MAC
HELP ME... If I don't work I don't eat. I've posted this before but no one has had or knows what this problem is caused by. PROBLEM: I just click on the Icon for Photoshop CS6 my MAC just shuts down as if I did a apple shut down. This just started...
-
I recently installed facetime 1.0.2 on a Macbook pro with osx 10.6.8. Facetime invariably loses sound from my end during every conversation after an indeterminate time. Facetime will also often not even open when I click the doc icon. Help please:)