Microsoft Office error

Hi,
I have recently upgraded to OS X v10.5 and since then my Microsoft Office has not been starting, I keep recieving the error:
Exception: EXCBADACCESS
Application Name: Microsoft Word
Application Buldne ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 12.0.0.071130
Crashed module Name: CoreFoundation
Crashed Module Version: unknown
Crashed Module Offset: 0x000c419a
Blame Module Name: CoreFoundation
Blame Module Version: unknown
Blame Module Offset: 0x000c419a
Application LCID: 1033
Extra app info: Reg=en Loc=-x0409
My system information is as follows:
Operating System: Mac OS X10.5 (Build 9A581)
CPU: Intel Core Duo, Number: 2, Speed: 1830MHz
gestaltPhysicalRAMSize err=0, result = 1024 MB
gestaltSystemVersion err=0, result=0x1050
Any help would be greatly appreciated, thanks :]

Because it works in another account, the issue may be caused by a preference, or .plist file. Try going to this folder:
Macintosh HD/Users/yourusername/Library/Preferences/ByHost
(where “yourusername” is the short name of your computer in lowercase letters, like williams - the folder looks like a house/home)
and move any file beginning with com.microsoft to the desktop or a new folder you create on the desktop, and restart or log-out/in. If needed, those files will be recreated by the application.
If that doesn't help, go up one folder level and try removing those .plist files generated by microsoft and restart.
If that helps, you will need to reset your settings in each application. Or you may want to drag each .plist file from your desktop to its respective folder in the Users/yourusername/Library/Preferences or ByHost folder to restore your settings. However, if one of the previous .plist files was causing the problem, you may be reintroducing it again and it would be safer to reset the Office preferences as you go.

Similar Messages

  • My iCloud Contacts will not load in Microsoft Office. error is MAP[ was unable to load the information service C:\PROGRA~2\COMMON~1\Apple\INTERN~1\APLZOD.dll

    My iCloud Contacts will not load in Microsoft Office. error is MAP[ was unable to load the information service C:\PROGRA~2\COMMON~1\Apple\INTERN~1\APLZOD.dll.  How do I correc t this problem?

    Hey PCSISTAH,
    Thanks for the question. I understand that you are experiencing issues with iCloud Contacts and Microsoft Outlook. The following resource may provide a solution:
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/TS3998
    Thanks,
    Matt M.

  • Microsoft office error on macbook

    hello am ram having one problem any one plz help me
    while installing i am getting this error
    Office 2011 14.1.4 Update can't be installed on this disk. A version of the software required to install this update was not found on this volume.
    i did not installed any office application in my macbook pro 1st time am installing but it shows that error every time and not allowing me to install
    please help

    misalaram wrote:
    Csound1@ thanks for reply
    i want to install microsoft office in my macbook pro
    how can i do tat...plz tell me
    Buy a copy of Office for Mac, install it, update it.

  • Microsoft Office error message

    Hi,
    I downloaded some bad application on my new intel 17" 2 GHz C2D machine and then my word wouldn't work at all. So I went to the application file where the 2004 office was stored and then tried excel etc. and they were all dead. So I restarted my machine and they all worked again. The only problem is every time I use Word (haven't tried the other ones yet) I get this message:
    An unexpected error ocurred while trying to load the Microsoft framework library.
    The message then goes away and I can copy and paste and use as normal. How do I get rid of this? Do I have to dump it all and reinstall the disk?
    Thanks,
    S.

    Try to reinstall Office 2004; save your data first.

  • Microsoft Offic error message

    Hi,
    I downloaded some bad application on my new intel 17" 2 GHz C2D machine and then my word wouldn't work at all. So I went to the application file where the 2004 office was stored and then tried excel etc. and they were all dead. So I restarted my machine and they all worked again. The only problem is every time I use Word (haven't tried the other ones yet) I get this message:
    An unexpected error ocurred while trying to load the Microsoft framework library.
    The message then goes away and I can copy and paste and use as normal. How do I get rid of this? Do I have to dump it all and reinstall the disk?
    Thanks,
    S.

    Hello,
    I too had this problem a few days ago. I did an "uninstall" but problem remained. I did a second uninstall and problem still remained. I did a third and forth and experimented with various upgrades (ex: not installing 11.3.0 and earlier 11.3.2) problem still persisted. Finally I went to FILE --->FIND, typed in FRAMEWORK and deleted the two Office Framework files. Office 2004 is working the the error message is gone. I'm not suggesting this is an "absolute" solution. But the error message has disappeared and my Office 2004 appears to still be working as I type two days later.

  • Microsoft Office Error on Jabber deployment via SMS Package

    Our customer is trying to rollout Cisco Jabber using Microsfot SMS Package. The first test of the package installation to a small test group each of the employees received the error in attached picture after launching and logging into Jabber.  It was assumed this was caused by Outlook being opened while the package was installing but we’ve tested the package on other workstations without Outlook being open and experience the same issue.

    Further to this
    We ran the Cisco Jabber MSI manually on one of our XP machines with all Office products shut down and the error still occurs.  If you shut down and log into Jabber a second time the error goes away.
    The customer would like the install to work without this error if possible

  • Report Generation Toolkit for Microsoft Office errors when building and applicatio​n

    Has anyone seen this issue?
    My program runs fine. When I try to buil an applcation, I get the attched error.
    Attachments:
    error.png ‏98 KB

    Have a look on this page.
    https://decibel.ni.com/content/thread/5936
    CLA 2014
    CCVID 2014

  • Microsoft office 2013 encountered an error during setup in Window 8.1

    Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
    However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
    I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works. 

    Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
    article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
    If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
    msiexec /unregister
    msiexec /register

  • I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    Which version of OSX and what email provider are you using.

  • Can't open Microsoft Office 2011 even after unistalling then reinstalling. Error message comes up before launch. What do I do? Can I fix this? I need to activate Microsoft Office within 15 days!!

    I recently got a new MacBook Pro Running on OSX Mavericks and used Time Machine to move my documents and applications. However Microsoft Office Student/ Home applications did not work and requested a product key. I did not have the product key for it as I had installed Microsoft a long time ago, so I purchased a new Mincrosoft Office 2011 Student/Home Pin to install Microsoft Office. Everything installed fine, however when I go to open it it failed to open.
    I need to activate my Microsoft Office within 15 days apparently and this is done when the application is launched. However none of the Microsoft Office applications do Launch (not Word, Powerpoint, Excel or Outlook).
    Whenever I tried to open one of the named above the Microsoft Error Reporting App would pop up and list the errors. I was advised on other support pages to disenable this app so I have done that but now Word is now giving its own error message saying:
    Process:    
    Microsoft Word [1380]
    Path:       
    /Applications/Microsoft Office 2011/Microsoft Word.app/Contents/MacOS/Microsoft Word
    Identifier: 
    com.microsoft.Word
    Version:    
    14.3.9 (14.3.9)
    Build Info: 
    Unknown-131030~0
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [152]
    Responsible:
    Microsoft Word [1380]
    I don't know or understand what is stopping me from launching my Misrosoft Office. I am wondering if others have encountered similar problems with OSX Mavericks and the Microsoft Office 2011? Does anyone have any ideas of how I can get it to launch?
    I need to get hold of my Word and Powerpoint Documents ASAP.

    Build Info:
    Unknown-131030~0
    This indicates you had a bad install. You need to completely remove Office and reinstall using your new CD Key. See instructions here. Do not do the simple remove, Use the COMPLETELY REMOVE ALL FILES steps.
    http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/
    so I purchased a new Mincrosoft Office 2011 Student/Home Pin to install Microsoft Office.
    You don't purchase a PIN. A PIN is generated when you install Office. You need a CD Key. If you bought Office365, you activate online.
    I have issues with the Microsoft User Data - are there supposed to be two? and where exactly do they belon. They are in the Documents file at the moment.
    Unless you used Outlook or Entourage you can delete both Microsoft User Data folders. When you install Office it will create a new one. Only Outlook & Entourage used this folder for data. W,E,P stores it's data in the User's Library/Application Support/Microsoft folder now.
    For help with removing dulicatate fonts installed by Office see:
    Office 2011 Font Management with Mavericks

  • This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on a terminal server

    Hi All,
    I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
    in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
    I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as 
    ""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
    a terminal server"" and apps gets closed.
    Please help me on this ASAP.
    Thanks & Regards,
    Sachin Shinde

    Hi,
    As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
    http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
    Regards,
    Melon Chen
    TechNet Community Support

  • My iPhoto won't open keeps on giving me an error message and my microsoft office two

    my iPhoto won't open keeps on giving me an error message and my microsoft office two

    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

  • Microsoft office is installed on two user accounts. One account works fine, the other account keeps getting an error message. Why wont it work on both accounts?

    Microsoft office is installed on two user accounts. My husbands account works fine, but my account keeps getting an error message every time I try to open up a new document. Why wont it work on both accounts? How do I fix this?

    Hi Aubs,
    Without knowing what the error is, there's not much help we can provide....
    Cheers,
    GB

  • Recieveing "OnUCAppointmentGetVisible" error in Outlook 2013 (64 bit) - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"

    Hi All,
    I originally posted this in the MS Support forums (http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/recieveing-onucappointmentgetvisible-error-in/1a40eca2-8cd1-40f1-a92f-cb08f0af6b72), but was directed over here.
    I have recently upgraded an installation of Office 2010 to 2013 (both 64 bit) but am now receiving an error which says:
    Window Title - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"
    An error occured while calling the callback: "OnUCAppointmentGetVisible"
    This seem to happen when I initially open a calender entry, and when I close the entry (most only the first time I close the entry).
    I did have some developer tools installed for Office 2010 and VS 2010 which played around with Excel,2013 but I have now uninstalled these.
    In addition, BCM 2010 was installed (but for the time being has been uninstalled), but I don't think that is the culprit.
    The issue is being caused be an Outlook add-in. I have three COM add-in enabled, but the one causing the issue in the "Lync Meeting Add-in for Microsoft Office 2013".
    We are currently trialling Lync in a demo installation which is in a different domain to any of the Exchange accounts, but should this cause a problem? For the time being I have disable this add-in.
    Regards,
    Chris
    Chris

    Hi,
    Sorry for my misunderstanding. If the issue is determined to be caused by Lync Meeting Add-in, please remove this add-in from Outlook, then go to Control Panel to repair Office 2013 program. After repairing,
     this add-in would be automatically reinstalled. Please check whether the issue persists. About how to repair Office programs, please refer to:
    http://office.microsoft.com/en-us/outlook-help/repair-office-programs-HA010357402.aspx
    If the Lync Meeting Add-in is not automatically reinstalled, please try to manually add this add-in by the following steps:
    1. Starting Outlook 2013 as an Administrator (right click, run as Admin).
    2. Click File > Options > Add-ins, Manage Com Add-Ins Go... > Add..., C:\Program Files (x86)\Microsoft Office\Office15\UCAddin.dll, OK.
    3. Close Outlook and start it as a normal user.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Microsoft Office 2013 Outlook errors due to it wants to connect to MS exchange

    Every time I try to load Outlook 2013 it gives me an error: The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action and when I click on it, it keeps going in a loop. What to do to correct it will
    not launch without exchange server and I have it. Any suggestions? And I download MS Exchange 2010 SP1x64 still nothing

    Same issue here.  I have the Surface Pro and only one Outlook Exchange Server account will connect.  They other one gives the same Microsoft Exchange is unavailable error.  The funny part is that these are both work email accounts that connect
    to the same server, but one works and the other does not.  I can ping the server no problem.  
    I have spent probably a total of 15 hours on the phone with Microsoft Office CS.  There's 15 hours I will never get back.  To say they were useless would be an understatement.  Half the time they just took down the issues and then said I had
    reached the wrong department and transferred me.  I got transferred 11 times on one phone call.  No one even tried to help.
    So unless Microsoft can come up with a solution to this I am taking the Surface Pro back.  This is really disappointing.  I was really hoping that Microsoft could be an alternative the Apple Universe.  Seems like they chose gimickery over
    functionality.  Windows 8 looks pretty and does some neat stuff, but sending and receiving emails is the most basic of the basics you expect from your PC.
    If anyone has a solution from Microsoft please post it here.  

Maybe you are looking for

  • Can I convert an standar account into an admin one since Terminal?

    Hi, Everybody! Trying to overcome some bugs on my MacBook, I decided to erase some folders from system and install Mac OS X from its original DVD. Bad idea. Now I only have one account, which may be the Admin one, but appears as a Standar one. I'm bl

  • Ndata not returning all possible results

    i created an index with userdatastore, basic lexer and basic wordlist preferences. Also a section group with ndata section. base letter, substring index all are true. but when i search for 'scri', i am not getting 'de*scri*ption' in the results. pls

  • All App failed when key in (few) Chinese characters with iOS5

    hi, my iPhone 4 was upgraded to iOS 5.0.1. But when I key in certain Traditional Chinese Characters (e.g. 還, 或, etc.), the app stop and return to iPhone start up menu. It happens to all app's, including native app of Messages, Notes, etc. I checked w

  • Bitrate video Quality

    Hello, I'm broadcasting live video using FMS , what bitrate should I use to broadcast in low or medium or high video quality, I'm using this AS3 code: camera.setMode(250, 180, 15, false); camera.setQuality(350, 50); camera.setKeyFrameInterval(30); mi

  • Fail when creating routing through bapi.

    what are the mandatrory steps to create routing using bapi fm ( bapi_routing_create )? when i create routing using bapi it is showing the routing is created succesfull  but it is not updating in the standard table plko .