Microsoft Office locks up while tethered

I tether my 8330 to my laptop through Verizon, and it works OK until I try to open a Microsoft Office (Word, Excel, etc.,) program while tethered which locks up the MS program. If I close the internet access/tether, the MS program instantly frees up, but then I can't re-tether without rebooting the computer.
Some months ago, I called VZ support and they had me reinstall the VZ Access Manager and it seemed to take care of the problem initially, but it came right back (the first time I was on the road - sort of figures)
Doe anyone know what I need to do to resolve this conflict?
Thanks
Will
Will Hepburn

Open a finder window and right click on the Macintosh HD entry and select Get Info. That will show you the size of the drive and the amount of free space left.
Or you can do both tasks with Disk Utility. In the Applications folder open the Utilities folder and Disk Utility is in there. Once it opens select the Macintosh HD entry and the First Aid tab, if it isn't already selected. You'll find the Verify disk option in that tab.
Look at the bottom of the window and you will see the size of the drive and the free space. Capacity and Available items.

Similar Messages

  • Microsoft Office crashing!!!!????

    Hello,
    Can anyone please help.....I have had Microsoft office for a while without issue .
    All of a sudden when I try and open the project gallery it crashes , if I try and open just a word document everything is fine .
    I have uninstalled Office twice and reinstalled, and it continues to do the same thing...it will only crash when the projct gallery is opened.
    Thoughts
    Raff

    Raffaele --
    I had the problem with the project gallery after I "cleaned house" and deleted what I thought were extraneous fonts. These are the ones needed by Office:
    Arial
    Arial Black
    Comic Sans MS
    Tahoma
    Trebuchet MS
    Verdana
    Webdings
    You can look in your Microsoft Office Folder>Fonts
    to see what's in there . . .
    Since you've uninstalled & reinstalled so many times, it's also
    possible that you have a whole bunch of duplicated fonts on your system.
    Open up your Font Book application, and look for any fonts in the "All Fonts" pane that have little bullets next to them. Report back on what you see.

  • While trying to save a word document (Microsoft Office 2011 for Mac) in PDF, there is a section of the header or footer which is always missing!! Could anyone please tell me hot to fix this problem!!??? It works perfectly fine on my friends Mac!!

    While trying to save a word document (Microsoft Office 2011 for Mac) in PDF, there is a section of the header or footer which is always missing!! Could anyone please tell me hot to fix this problem!!??? It works perfectly fine on my friends Mac!!

    Easiest way with Acrobat pro, is save the Word document, then convert the document to PDF with Acrobat, rather than doing a "save as" in Word itself to PDF.
    Do you have Acrobat full version or Pro?

  • Please wait while Windows configures Microsoft Office Professional ...

    Hi,
    Each time when I start Office 2013, it gives me "Please wait while ..." (see screenshot):
    What I did:
    -first I had Office 210: reinstalled, rebooted, uninstall, rebooted, installed, repaired
    -used this reference:
    http://support.microsoft.com/kb/2528748/en-us but didn't fix it
    -upgraded to Office 2013, rebooted, uninstalled Office 2013, reinstalled, repaired
    -ran a file system check ...
    Also ran http://support.microsoft.com/kb/2739501 didn't help
    Os is Windows 2008R2.
    Please advise.
    J.
    Jan Hoedt

    Hi
    Try adding the following registry key:
    reg add HKCU\Software\Microsoft\Office\15.0\Word\Options /v NoReReg /t REG_DWORD /d 1
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Help: My dock froze while installing Microsoft office: Mac

    I was installing Microsoft Office 2008: Mac when the downloader got stuck at a certain point and the estimated time until finish is only increasing and the download bar is not moving. I tried to open up Firefox while this was happening and this resulted in me Force Quitting firefox and left me with a "Frozen Dock"
    How should I handle this situation and should i cancel the download for office because their website says that i am entitled to a new product key since the download did not work.
    Note: the microsoft office: mac that i am installing is from a disk, not the internet.
    Message was edited by: Theisen

    Theisen,
    Welcome to Apple Discussions.
    Your post is a little confusing, first you say you were installing MS Office via a downloader and then later you say you are installing it from a Disc. If you installing it via the install disc the you are doing just that, installing not downloading.
    Also when doing an installation it's generally not a good idea to be working in other applications as it seems you were by trying to use Firefox.
    My recommendation would be to restart your computer and ONLY run the MS Office installation per the instructions MS provides. Do not have any other applications running. If it still fails then contact MS, you should be able to find the number in the documentation you received with the product. After you have installed it then run updates for it to ensure you are on the most up-to-date version which is currently 12.2.4.
    Regards,
    Roger

  • Microsoft office access record-locking information

    Hello,
    Maybe is a stupid question but i didn't saw question similar to this and I'm concerned about my privacy. Yesterday when i logged in to my skype account I found out that in Users-App Data-Skype- there were created a small file called 'microsoft office access record-locking information'. I'm not exactly sure what this means, because it is happening for a first time. I'm not using Microsoft account for logging in into Skype, also I did not gave any access to another computers, especially to Skype folder.Also after logging off from Skype, this file is not automatically deleted. Can somebody explain me should I concern about something?

    CMMMC wrote:
    I dont know how to post my own question, but see that there is a response to this question within the last 8 mins.
    what my question is (and it must be ridiculasly simple but i cant find it) is how do i get to the page where i can make calls...where my contacts are and such...from the skype home page?  i am in prague, using skype from here...am logged into my account but it is just all of my account info, history and such.  there is no icon to make a call.  i have clicked on everything to see where the option is to simply make a call and...nothing...
    this happened before with my husband when he was using skype on windows 8 for the first time.  this computer has windows xp so it ought to be straight forward...not so far. 
    thanks,
    CMMMC
    It’s still straight forward but not using your Account page on web. You need to install Skype application on your computer and login to this application with your account details.
    http://www.skype.com/en/download-skype/
    See also this:
    https://support.skype.com/en/faq/FA11098/getting-s​tarted-with-skype-windows-desktop

  • Hello, I cannot show my video files on microsoft office program with  macair book 11 inc notebook while using projector

    I cannot show my video files on microsoft office program with  macair book 11 inc notebook while using projector

    When you next have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Windowserver Crash while using Microsoft Office

    Hello everyone,
    This problem has ocurred several times over the past year and I can't seem to find any solution. That's why I hope some of you guys know what's the problem.
    Whenever I have a Microsoft Office window opened (word, powerpoint etc.) and I open spaces (exposé) there's a 50% chance the computer freezes completely and after that it reboots. It seems to be a problem with the WindowServer thread and somehow it is linked with Microsoft Office. This is very annoying because I have lost loads of unsaved data while editing documents.
    What I have tried to do so far:
    Reinstall Microsoft Office
    Reinstall OSX
    This didn't help at all, so I haven't got a clue what to do next.
    I have copied the crash log and inserted it below (I'm sorry for the huge amount of text):
    Anonymous UUID:       4FBFF25F-8DB2-20D1-02E9-489DCFC49932
    Fri Nov  1 13:32:05 2013
    panic(cpu 0 caller 0xffffff7f83568fac): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80a0ba6000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 0), Frame : Return Address
    0xffffff807738aea0 : 0xffffff8001222f69
    0xffffff807738af20 : 0xffffff7f83568fac
    0xffffff807738aff0 : 0xffffff7f81c1c53d
    0xffffff807738b0b0 : 0xffffff7f81ce8d9e
    0xffffff807738b0f0 : 0xffffff7f81ce8dfc
    0xffffff807738b160 : 0xffffff7f81f6d5be
    0xffffff807738b290 : 0xffffff7f81d0cd41
    0xffffff807738b2b0 : 0xffffff7f81c2308d
    0xffffff807738b360 : 0xffffff7f81c20bae
    0xffffff807738b560 : 0xffffff7f81c224d7
    0xffffff807738b630 : 0xffffff7f82b815bf
    0xffffff807738b700 : 0xffffff7f82bab993
    0xffffff807738b780 : 0xffffff7f82b93cc0
    0xffffff807738b7e0 : 0xffffff7f82b945ba
    0xffffff807738b830 : 0xffffff7f82b94934
    0xffffff807738b8a0 : 0xffffff7f82b951a8
    0xffffff807738b8e0 : 0xffffff7f82b621ca
    0xffffff807738ba60 : 0xffffff7f82b91b20
    0xffffff807738bb20 : 0xffffff7f82b60cb9
    0xffffff807738bb70 : 0xffffff80016cc226
    0xffffff807738bb90 : 0xffffff80016cd821
    0xffffff807738bbf0 : 0xffffff80016cb28f
    0xffffff807738bd40 : 0xffffff80012b6008
    0xffffff807738be50 : 0xffffff8001226bb1
    0xffffff807738be80 : 0xffffff80012139b5
    0xffffff807738bef0 : 0xffffff800121e003
    0xffffff807738bf70 : 0xffffff80012c921d
    0xffffff807738bfb0 : 0xffffff80012f3e26
          Kernel Extensions in backtrace:
             com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f8355b000->0xffffff7f8356dfff
                dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f83553000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f81b24000
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f818ba000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f81b78000
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f83556000
             com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f81bcb000->0xffffff7f81e3afff
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f818ba000
                dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f81bbb000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f81b78000
             com.apple.nvidia.classic.NVDANV50HalTesla(8.1.8)[3666E0FC-87C7-3329-BD8C-2F1ADE D100A4]@0xffffff7f81e45000->0xffffff7f820f1fff
                dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f81bcb000
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f818ba000
             com.apple.GeForceTesla(8.1.8)[67BAF872-A238-3787-AB74-22297A51FE8F]@0xffffff7f8 2b4f000->0xffffff7f82c19fff
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f818ba000
                dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f81bbb000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f81b78000
                dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f81bcb000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000001000000
    Kernel text base: 0xffffff8001200000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 1184932570380
    last loaded kext at 262904294067: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f8366b000, size 65536)
    last unloaded kext at 323635681200: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f8366b000, size 57344)
    loaded kexts:
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.GeForceTesla          8.1.8
    com.apple.driver.AppleIntelHDGraphics          8.1.8
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleMuxControl          3.4.12
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleIntelHDGraphicsFB          8.1.8
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleUSBCardReader          3.3.5
    com.apple.driver.AppleIRController          325.7
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOSurface          91
    com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
    com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleGraphicsControl          3.4.12
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.AppleUSBMultitouch          240.6
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
    com.apple.iokit.IOUSBMassStorageClass          3.6.0
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOEthernetAVBController          1.0.3b3
    com.apple.driver.mDNSOffloadUserClient          1.0.1b4
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: ST9500420AS, 500,11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Hub
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Internal Memory Card Reader
    USB Device: Hub
    USB Device: IR Receiver
    USB Device: Built-in iSight
    Thunderbolt Bus:

    Hi Jasper,
    Just a stab in the dark here...
    Try disabling automatic graphics switching.  http://support.apple.com/kb/HT4110
    It wouldn't hurt to also read the following article on identifying which GPU is in use:
    http://support.apple.com/kb/HT4152
    Both of the above links should relate to your 15-inch Mid 2010 MacBookPro running Mavericks.
    Regards,
    Lyle

  • I want to reset my Macbook Pro back to factory condition because I want to completely eradicate Mackeeper which the previous owner (it is preloved) had downloaded. But I don't want to lose the Microsoft Office that she had installed previously. Help?

    I recently bought a pre-loved Macbook which has been sparsely used but I only realised Mackeeper was installed after I got back home. I did a thorough check previously before I bought it but I didnt know what Mackeeper was until I checked it out online. I want to get rid of it completely and the only way to do that is to reset my Macbk to factory mode but by doing so, I will delete Microsoft Office too and the previous owner had lost the key product no and the neccessities to reinstall the software. I have seen others say something about moving it to an external hard drive but I don't have one and I think it would be costly? Please, any experts on this matter come forward and give your best opinions. Thanks!
    Additional info -
    Software type: OS X 10.9.2

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    3. Other issues
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo).  It is currently up to date with Microsoft updates.  I am running Mac OS 10.6.8.  I just updated my Mac software with "Security Update 2012-001".  I am now unable to print (Epson NX510

    I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo).  It is currently up to date with Microsoft updates.  I am running Mac OS 10.6.8.  I just updated my Mac software with "Security Update 2012-001".  I am now unable to print (Epson NX510 printer) from Excel or Word.  When I click on the Print menu item in Excel, there is a flash in the background like it is trying to open the print window, but nothing else.  I am able to print from other programs like TextEdit, Mail or KakeidaGraph.  As far as I know I have the latest Epson print driver.
    Also, I am also unable to open an existing Excel or Word file from the open menu - both programs lock up and do not respond.  I have to force quit.  After I restart Excel or Word I can open an existing file by double clicking on the file, but if I again try to open another file from the open menu, Excel or Word lock up.
    Any similar problems?

    Howdy,
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    If you can't easily restore from a backup, you can instead do the following:
    - You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
    - Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
    - Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
    - Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
    Links for 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    or the link to directly download this 1.09GB combo updater:
    http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • Recieveing "OnUCAppointmentGetVisible" error in Outlook 2013 (64 bit) - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"

    Hi All,
    I originally posted this in the MS Support forums (http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/recieveing-onucappointmentgetvisible-error-in/1a40eca2-8cd1-40f1-a92f-cb08f0af6b72), but was directed over here.
    I have recently upgraded an installation of Office 2010 to 2013 (both 64 bit) but am now receiving an error which says:
    Window Title - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"
    An error occured while calling the callback: "OnUCAppointmentGetVisible"
    This seem to happen when I initially open a calender entry, and when I close the entry (most only the first time I close the entry).
    I did have some developer tools installed for Office 2010 and VS 2010 which played around with Excel,2013 but I have now uninstalled these.
    In addition, BCM 2010 was installed (but for the time being has been uninstalled), but I don't think that is the culprit.
    The issue is being caused be an Outlook add-in. I have three COM add-in enabled, but the one causing the issue in the "Lync Meeting Add-in for Microsoft Office 2013".
    We are currently trialling Lync in a demo installation which is in a different domain to any of the Exchange accounts, but should this cause a problem? For the time being I have disable this add-in.
    Regards,
    Chris
    Chris

    Hi,
    Sorry for my misunderstanding. If the issue is determined to be caused by Lync Meeting Add-in, please remove this add-in from Outlook, then go to Control Panel to repair Office 2013 program. After repairing,
     this add-in would be automatically reinstalled. Please check whether the issue persists. About how to repair Office programs, please refer to:
    http://office.microsoft.com/en-us/outlook-help/repair-office-programs-HA010357402.aspx
    If the Lync Meeting Add-in is not automatically reinstalled, please try to manually add this add-in by the following steps:
    1. Starting Outlook 2013 as an Administrator (right click, run as Admin).
    2. Click File > Options > Add-ins, Manage Com Add-Ins Go... > Add..., C:\Program Files (x86)\Microsoft Office\Office15\UCAddin.dll, OK.
    3. Close Outlook and start it as a normal user.
    Regards,
    Winnie Liang
    TechNet Community Support

  • How to add shortcuts to user Start Menu and Taskbar or Desktop with using Microsoft Office 2013 Config file.

    Hello,
    How can i add the shortcuts for Office 2013 feature (Word, excel, ext) to the users taskbar or desktop with using config.xml file while installing the Microsoft Office 2013 from SCCM?
    I know how to do that with OCT, but i have another problem if i use OCT. So i have to do it with Config.file, but i don't know which code can i write on config.xml file to create shortcut on desktop or taskbar...
    Regards,

    Hi
    There is a known issue about
    changing the shortcut location for an Office 2013 application:
    When you try to change the shortcut locations for Office 2013 applications in the Office Customization Tool (OCT), you receive the following error message:
    Invalid start in folder. Please try again.
    Then, you add the Start in location for Office 2013 and run a customized installation. When you double-click the shortcuts that are displayed on the desktop, Configure shortcuts does
    not work and you receive the following error message: 
    Sorry, we couldn’t find your file. Is it possible it was moved, renamed or deleted?
    To work around this issue, type a single open bracket ([) in the Start in
    field.  
    In addition, refer to the link below on "Configure shortcuts" in OCT:
    http://technet.microsoft.com/en-us/library/cc179097.aspx#Configure_shortcuts
    Regards
    Tylor Wang
    TechNet Community Support

  • Microsoft Office Excel - compatibility Checker message in BPC 7.5

    Hello Experts,
    We are using BPC 7.5 M with Office 2007 on Application Server, we have upgraded from BPC 5.1 with Office 2003 where Dimension were of .xls and templates & Reports were of .xlt (office 2003 format) , After upgrade we have not done any changes in Dimension, Templates, reports version and they all are in .xls (Dimension) & .xlt (templates & reports) version
    We are getting a error while saving a dimension in Admin module (by clicking on "Save to Server" link):
    Microsoft Office Excel - compatibility Checker
    Significant loss of functionality
    Some cells have overlapping conditional formatting ranges.
    Earlier version of Excel will not evaluate all of the conditional
    formatting rules on the overlapping cells. The overlapping
    cells will show different conditional formatting.
    Do we need to convert the dimension files in 2007 format (.xlsx) or how to avoid the above told message while saving dimension file.
    Thanks,
    Rohit

    Hi Rohit Khatak,
    Could you solve your problem? I'm having this issue while processing ACCOUNT dimension (and only ACCOUNT) on Development environment, and nothing was changed at the server.
    Every time I try to save, I receive this compatibility error, and when I press "Continue", the file gets with a strange format. If I press the save again, it stil gives me the same error.
    I already tryed to process the dimension, to Refresh Dimension Members, and the error persists.
    Is there a way to solve this problem at BW side? On RSD1 maybe?
    Thanks in advance.
    Yours,
    Adriano

  • IMac G5 no longer able to use Microsoft Office 2004

    I have had Microsoft Office 2004 installed on my G5 for several years but I am not able to access any of the Microsoft applications anymore. I get the following message when trying any of the Office applications: "Microsoft (Entourage, or whatever) has encountered a problem and needs to close. We are sorry for the inconvenience." It provides an error report that can be sent to Microsoft which I have done several times.
    I did a verify using the installed disk utility app and received the following message: "Volume bit map needs minor repair Macintosh HD" "Error: The underlying task reported failure on exit" "1 HFS volume checked" "Volume needs repair."
    The installed Disk Utility doesn't allow me to click on REPAIR. I have 118 GB available. If I use the Disk Utility on the install disk will it allow me to do a REPAIR to the HD and can I mess up anything else?
    Any help I can get will be appreciated. I have some important stuff on Word that I would hate to lose.
    Thanks in advance for any help offered.

    In order for Disk Utility to work, it has to be on a differnet disk than the internal drive:
    Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk.
    Then reboot from your internal drive and repair permissions.
    It will not mess up any of your data.
    Message was edited by: MGW

Maybe you are looking for

  • TransferHandler text "cut" action

    Hello, I've searched about these forums a bit, and haven't found any threads with answers; hopefully this one will be more successful! When installing a custom TransferHandler on a JTextComponent, the component's default behavior for Cut/Copy/Paste i

  • Sub-menus to Top Level Pages issue

    My web site has eight top level pages, and sub-menus to those pages. Using the menus widget I set up the menus on my master page and it works fine.  But I decided that on one (and only one) of the top level pages i do NOT want the drop down menu to s

  • IDVD freezes, heats my computer up, and the sceen turns black

    I try to make a little half and hour movie on iDVD. When i'm almost complete and about to add chapters to it then my Macbook pro tends to heat up as it makes some nosie, freezes the computer momentarily until the screen appears all black. I assumed t

  • Payment System Down?

    My CC expired and I have to update it in my account before I can access my products...except when I click on the link to update my payment details I'm told to try again later. (I can't even enter the new CC # so it's not a card issue) Anyone else see

  • Scenario to call c programs from pl/sql

    I know that c routines can be called from Oracle pl/sql. But, I would like to know that anybody has the realtime scenario where it is unavoidable. Please let me know if anybody has any specific scenarios. Thanks in advance Sudhir