Microsoft OneNote 2003 SP1

I have purhased Notebook Satellite P20 with Microsoft Office OneNote 2003. My trouble is that,I cannot update OneNote 2003 SP1 (Service Pack 1) from Microsoft update page. Microsoft said I need ask help from Toshiba because I have OEM version of OneNote 2003 program. What I need
doing?
Urpo Bfver

Hi,
I found something very interesting for you.
Preinstalled MS OneNote can not be updated to Service Pack1. During an update or reinstallation of Microsoft Office OneNote on the Notebook, the following error message may appear:
"Microsoft Office OneNote Setup cannot continue because the installation source has been corrupted."
Try re-installing Microsoft Office OneNote from the Toshiba Recovery DVD. OneNote is present on a later release of this DVD, but not on the first release. If Microsoft Office OneNote is not present on the Toshiba Recovery DVD, then follow these steps to resolve the problem:
1. Locate the Microsoft Office OneNote Product Key, on the Certificate of Authenticity which is provided with your computer.
2. Un-install Microsoft OneNote, through the Add/Remove Programs applet in the Windows Control Panel (Start > Settings > Control Panel > Add/Remove Programs).
3. Download the Microsoft Office OneNote 2003 Trial from the Microsoft website:
https://microsoft.order-4.com/onenotedl/welcome.asp?id=front
4. Install the OneNote 2003 Trial, using the Product Key from the Certificate of Authenticity located in step 1, rather than the Product Key provided on the Microsoft website. The Toshiba-supplied Product Key will unlock the full version of OneNote that the Trial version is a part of.
More useful information you can find on:
http://support.microsoft.com/default.aspx?scid=kb;en-us;875556
Bye

Similar Messages

  • Microsoft OneNote 2003 missing sku1a1.cab file

    Here is the *real* answer to this question that everyone is looking for:
    Missing sku1a1.cab file
    1) Get your OneNote product key off your computer.
    There is a little free program that will do this for you here:
    http://www.nirsoft.net/utils/produkey.zip
    2) Uninstall OneNote
    3) Download the trial version of OneNote here:
    http://www.microsoft.com/office/onenote/prodinfo/trialoffer.mspx
    4) Install the trial version and enter your product key when prompted
    5) Check "install updates" at the end of the installation process and it will install SP2 and put you back where you were before the sku1a1.cab file disappeared.
    UPDATE:
    I am re-posting this topic.
    I just wanted to clarify one point, the reason I included the "key application" was because most questions I've seen regarding the missing *.cab file have been from people who own the product but can't find their CD or key number.
    This is what happened to me, and this is the solution I found that worked, when none of the forums I searched provided a workable answer. My solution will not work if you do not own the product in the first place, because the key application won't be able to find a key on your computer for this program.
    Thank you.

    Hi
    Thanks for your advice.
    But I dont think that the using of any key showing programs is necessary.
    In my knowledge you should receive a CD cover with the activation key for OneNote.
    You should check the back side of the cover.
    Anyway, thanks for your assistance.
    Bye

  • Can I install OneNote 2003 from the recovery disk?

    I need a clarification (both my local Toshiba dealer and Microsoft helpdesk have proven to be equaly useless)
    I have a Toshiba Satellite and product recovery
    Recently (per mistake) I uninstalled Microsoft OneNote 2003
    It is still on my recovery CD, I have licence number but I cannot install it without reinstaling whole system and formatting my hard disc?
    And I really don't want to do that.
    Is there any other way?
    Thanks for your help

    It seems you didnt understand the whole thing
    The point is that you get the software (for free) in connection with your notebook.
    Its is not a full licence. Its an OEM licence this means that you can use this software only on this notebook.
    Because of that you have to use the Recovery disk if you want to use all the additional (non-Toshiba) programs.
    The Toshiba tools and software can be downloaded from the Toshiba page but you will be not able to download non-Toshiba software.

  • Unable export crystal report XI to pdf on window server 2003 SP1

    I have a class asp function to export crystal report XI to pdf file, it is workable at winXP but when i copy it to window server 2003, it exported the file with zero length (file size is 0kb).
    when i try to open the zero length pdf file, it shows the file is already open or in use by another application.
    when i run my export function, i can see there is a new file created at the folder "C:\windows\Temp", when i try to open the tmp file, i get the message "The process cannot access the file because it is being used by another process", i can open the tmp file after i end the process "w3wp.exe network service", the data in the tmp file is exactly what i need to export to the pdf file.
    At the window server 2003, I have installed the Crystal Report XI developer edition,
    For the web application folder and the pdf export folder, Read, Write and Modify permission has been set for the following accounts:
    1. myServer\Administrators
    2. myServer\ASPNET
    3. myserver\IUSR_myserver
    4. myServer\IWAN_myserver
    5. Network Service
    6. System
    7. myServer\Users
    I think it is the permission problem, but how to set the right permission at the window server 2003 SP1? please advise. thanks

    Hello,
    It is a permission issue. When you export Crystal first tries to write the file to the local TEMP folder and then delete it to see if it has read/write permissions. If it fails to delete the file you need to give the TEMP folder on the WEB server permissions for your application. Check Microsofts WEB site on how to set permissions on shared folders for your ASP application.
    You may want to search in forums also, this looks familar.
    Thank you
    Don

  • Errors using ICertView connection from Windows 7 to Server 2003 SP1

    Hello!
    I have a RootCA on windows server 2003 SP1. I connect to certificate store remotely using ICertView interface from Certadm.dll to retrieve issued certificates. This scheme works fine from windows XP, but when I call method openconnection (no matter which
    way: from powershell, certutil, from code directly) I get following errors: 
    1. from host not in AD domain  "CCertView::OpenConnection No more data available. 0x80070103 (WIN32/HTTP: 259)" 
    2. from AD domain joined host error is "0x800704C7 The operation was canceled by the user."
    However, ICertAdmin interface works on Windows 7 without any problems.
    Someone tells me that few years ago hi had checked this scheme and it`s worked! 
    after this article http://support.microsoft.com/kb/892500 I have a suspicion thah installed SP1 broke DCOM permissions. I configure permissions on COM host according to this article but connection won`t work... 
    On Windows 7 I have used 2 versions of certadm.dll - native windows 7 and from Server2003 - all the same :( 
    Can somebody help me make this work or explain why it is impossible?
    Best regards.
    -- Stanislav.

    After enabling debug logging for enrollment by certutil
    -setreg enroll\debug 0xffffffe3  and running certutil –view I have get following
    1. from host in domain:
     certutil –view :
    ========================================================================
    402.511.948: Начало: 19.05.2014 13:34 43.913s
    402.516.0: certutil.exe
    402.520.0: GMT + 4,00
    301.3888.0: certcli.dll: 6.1:7601.17514 retail
    301.3888.0: certutil.exe: 6.1:7601.18151 retail
    301.3788.465:<2014/5/19, 13:34:43>: Командная строка: CertUtil -config hostname\caname -view
    419.5898.0:<2014/5/19, 13:34:43>: 0x0 (WIN32: 0)
    705.1857.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    705.2226.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    705.3007.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    1207.632.0: 0x800704c7 (WIN32: 1223)
    1207.705.0: 0x800704c7 (WIN32: 1223)
    443.258.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    316.1383.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    301.3792.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
    301.3807.509:<2014/5/19, 13:34:43>: Состояние команды: Операция была отменена пользователем. 0x800704c7 (WIN32: 1223)
    402.377.949: Конец: 19.05.2014 13:34 43.991s
    2. from standalone host
    402.511.948: Начало: 19.05.2014 14:01 22.908s
    402.516.0: certutil.exe
    402.520.0: GMT + 4,00
    301.3888.0: certcli.dll: 6.1:7601.17514 retail
    301.3888.0: certutil.exe: 6.1:7601.18151 retail
    301.3788.465:<2014/5/19, 14:1:22>: Командная строка: CertUtil –config
    hostname\caname -view
    429.2457.0:<2014/5/19, 14:1:23>: 0x31 (WIN32: 49): 8009030C: LdapErr: DSID-0C0904DC, comment: AcceptSecurityContext error, data 52e, v1db1
    429.2457.0:<2014/5/19, 14:1:23>: 0x31 (WIN32: 49): 8009030C: LdapErr: DSID-0C0904F8, comment: AcceptSecurityContext error, data 52e, v2580
    812.494.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
    805.233.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
    804.293.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
    705.429.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044): Ignored!
    705.2231.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    705.3007.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    1207.632.0: 0x80070103 (WIN32/HTTP: 259)
    1207.705.0: 0x80070103 (WIN32/HTTP: 259)
    443.258.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    316.1383.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    301.3792.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
    301.3807.509:<2014/5/19, 14:1:23>: Состояние команды: Дополнительные данные отсутствуют. 0x80070103 (WIN32/HTTP: 259)
    402.377.949: Конец: 19.05.2014 14:01 23.457s
    any advise?
    -- Stanislav.

  • Unable to set sga_target 2Go at windows 2003 SP1

    Hi all,
    I get out of memory error when trying to set sga_target (oracle 10g) more than 2Go at a windows 2003 sp1 server.
    I need help please.
    TIA
    Yang

    Check if the below document helps:-
    http://support.microsoft.com/?kbid=291988
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q319043
    Metalink:
    Doc ID: Note:1036312.6
    Subject: Utilizing Up to 3GB Virtual Memory on Windows NT Server 4.0
    Doc ID: Note:46053.1
    Subject: Windows NT Memory Architecture Overview
    Doc ID: Note:225349.1
    Subject: Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms

  • Can JDK1.3.1_16 be installed on Microsoft Server 2003, Standard Edition?

    Hello,
    I installed SDK1.3.1 update 16 on a computer with the operating system Microsoft Server 2003, Standard Edition.
    The JAVA_HOME variable was NOT automatically created as part of the installation. So I created it myself.
    I installed a voice recognition browser afterwards (that requires JDK1.3.1 update 06 or later) and it could not detect that the appropriate JDK had been installed and/or the JAVA_HOME variable had been set correctly.
    Is it normal for the JAVA_HOME variable to not be created automatically? If this is not normal, what could be the problem and how can I rectify it? Again I need a version of JDK 1.3.1 for the browser to work.
    Thanks,
    Bonnie

    Hi Bonnie
    Maybe a bit late to comment, but for the record...
    I just tried to install JDK1.3.1 on a Windows Server 2003 Standard Edition SP1 (version 5.2.3790) server.
    I initially tried to install 1.3.1_13, but java -version failed quietly with following error in eventvwr logs:
    Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
    The application, C:\jdk1.3.1_13\jre\bin\java.exe, generated an application error The error occurred on 03/30/2006 @ 08:47:35.425 The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)I tried uninstalling and reinstalling JDK from Add|Remove Programs, but without success.
    I then tried 1.3.1_8 and it worked fine first time.
    I then tried 1.3.1_12 and it failed with this eventvwr message
    Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
    The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)The 1.3.1 documentation that I've read doesn't explicitly mention support for Server 2003.
    In contrast, 1.4 explicitly supports Server 2003.
    Regards
    Matthew

  • Migrate Oracle EBS 12.1.3 from Microsoft Windows 2003 32-Bit to Linux

    Hi
    We are currently using Oracle EBS 12.1.3 on Microsoft Windows 2003 32-Bit. We are planning to migrate to linux. I have gone through the certification matrix and the following versions certified with Oracle EBS 12.1.3
    1. Linux x86 Oracle Linux 5
    2. Linux x86 Oracle Linux 4
    3. Linux x86 Red Hat Enterprise Linux 5
    4. Linux x86 SLES 10
    Question #
    1Q) I would like to know is there any linux freeware which is certified with Oracle EBS 12.1.3
    2Q) Also please let me know which documents I need to follow to migrate Oracle EBS 12.1.3 from Microsoft Windows to Linux

    1Q) I would like to know is there any linux freeware which is certified with Oracle EBS 12.1.3No.
    2Q) Also please let me know which documents I need to follow to migrate Oracle EBS 12.1.3 from Microsoft Windows to LinuxApplication Tier Platform Migration with Oracle E-Business Suite Release 12 [ID 438086.1]
    To migrate the database you can use export/import or transportable tablespaces -- Refer to these docs for details:
    Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1]
    Export/import process for R12 using 11gR1 or 11gR2 [ID 741818.1]
    Using Transportable Database to migrate E-Business Suite R12 Using Oracle Database 10gR2 or 11g [ID 734763.1]
    Thanks,
    Hussein

  • Printing microsoft word 2003 document and pdf created from the document are different

    I created a microsoft word 2003 document with jpg pictures and printed it on my HP Inkjet printer. I then created a pdf by saving as a pdf from the microsoft word 2003 document. The settings for images were 300 dpi and zip compression. The pdf file created was ~3 MB whereas the word document was ~250 KB. It looked fine on the screen but when I printed it the jpg pictures from the pdf were very dark and not very desirable. When I printed it on my HP Color laser 2600n printer I couldn't see the difference in the jpg pictures.
    I am creating the pdf files to send to the online publisher lulu.com to print. I have used the settings to create the pdf they recommend from their website; however they aren't real clear in the information they give for the recommended settings.
    My question is why would the print out be so awful using the HP Color Ink Jet printer since it is very good for printing pictures?

    There are many reasons, but most revolve around the color space and coding for the colors. Acrobat uses 8 bit RGB.

  • JFEMSEND in combination with Microsoft Outlook 2003

    Hi,
    I have a urgent question about sending email using the Microsoft Outlook Client 2003 and OS Windows XP professional. The version of Adobe Output Solutions is: 5.5.0.308.
    When I try to send an email using JFEMSEND I get the following message in the log:
    2007/05/14 13:14:32 d:\usr\adobe\Bin\jfserver.exe: [314]Agent exit message: [313]*** Spawn of agent may have failed ***
    2007/05/14 13:14:32 d:\usr\adobe\Bin\jfserver.exe: [307]Launching task '"d:\usr\adobe\Bin\jfemsend" "*" "e:\data\adobe\jf_vw_tst\data\sp000007.dat" "e:\data\adobe\jf_vw_tst\PDFmail\sp000007.pdf" -apr"d:\usr\adobe\jf_vw_tst\PRE\DMR344J.PRE" -all"d:\usr\adobe\jf_vw_tst\jfserver.log" -asl1 -C01 -aii"d:\usr\adobe\jf_vw_tst\jfemsend.ini"'.
    2007/05/14 13:14:37 d:\usr\adobe\Bin\jfemsend: Unknown MAPI error...
    2007/05/14 13:14:37 d:\usr\adobe\Bin\jfserver.exe: [314]Agent exit message: [313]*** Spawn of agent may have failed ***
    The setup of JFEMSEND is:
    [Email]
    ; login name (not necessary for SMTP) -emuser=
    User=Outlook
    ; login password (not necessary for SMTP) -empassword=
    Password=******
    ; e-mail system -emsys=
    ; can specify smtp, mapi, vim or test
    system=mapi
    When using the previous version of Adobe (Jetform Output Solutions) sendig of email works fine. To go back to this version is not an option...
    Can anyone help me on this issue?
    Regards,
    Fred van der Hilst
    IBS Netherlands

    Folks,
    I have an iPod (30 GB). I wanna synchronize my
    contacts from Microsoft Outlook 2003, but no success
    so far. I have the latest iTunes build. I go to
    Preferences|iPod|Contacts and choose there "Microsoft
    Outlook" from the drop down. What is suspicious is
    that I don't see the list of contacts populated
    there. There is just the "Synchronize all contacts"
    option enabled. When the synchronization starts, I
    allow iTunes to access Outlook, and then there are no
    errors. However, there are no contacts on my iPod as
    well. Have a resolution?
    Regards,
    George
    Hi George,
    are you synch'ing your ipod to another computer or just your laptop? seems you have to set Ipod preferences for each computer you synch w/ (e.g., desktop for music and laptop for contacts). FYI, my version of Itunes (6.04) doesn't populate a list of contacts, either, it just says synch w/ "all" .
    good luck, Mainlandhaole
    Sony laptop   Windows XP Pro   w/ latest Service Packs

  • Making non-standard size pdfs from Microsoft Word 2003 on pc

    I have Acrobat 8 Professional (pc, Windows XP op system), and want to know how to make a pdf from Microsoft Word (2003) where the dimensions of my document remain as they are, a non-standard size, such as 5.5" x 8.5". All the choices of "paper size" are standard only, and if I check "Custom" and type in the non-standard dimensions, it doesn't work. In other programs, such as InDesign, I can make a pdf of any document size I want with no problems. Does anyone know how to make this work for Word on pc?

    You can create a custom page size for Acrobat.
    In Word:
    File > Print (choose AdobePDF) > Properties.
    On the Adobe PDF Document Properties tab, choose Add next to Adobe PDF Page Size.
    Type in a name for your new custom page size and type in your dimensions.
    Click Add/Modify to close that window, then select your newly created paper size from the drop down.
    Click Ok to close that window
    Click OK to print
    For future printing, you would not have to redefine the page, just choose it from the dropdown.

  • E-mail document from Microsoft Word 2003

    I am not able to compose a document in Microsoft Word 2003 and e-mail it from there.  The format is available and so is the send button.  The message is just not sent.

    I now use Verizon wireless rather than cable.  Do  you think the problem may be with Verizon?
    Nope. There would be no difference there.
    Do you have Outlook 2003 as well as Word 2003?
    Do you use it or Windows Mail for your email?
    Whichever it is, set that as the default. See this Microsoft page.
       Change which programs Windows uses by default
    -Jerry

  • Problem in handling mail attachment by java in Microsoft outlook 2003

    I have written code in Java for extracting attachment files from mail message but the same code is working with Microsoft Outlook 2000 but not working with Microsoft Outlook 2003. need solution for this problem ASAP.It is failing in recognizing boundries of attachments.
    Mail API version :1.3.3_01
    Part part = mimemultipart.getBodyPart(i);
    String disposition = part.getDisposition();
    objStatement=objConnection.createStatement();
    if ((disposition != null) && (disposition.equals(Part.ATTACHMENT) || disposition.equals(Part.INLINE)))                System.out.println("****Attachement found****");
    rs=objStatement.executeQuery("select KNTA_ATTACHMENT_S.nextval from dual");
    while(rs.next())
    strAttachementId=rs.getString(1);
    System.out.println("Attachement id"+strAttachementId);          strFileName=part.getFileName();          System.out.println("file attach with the mail"+strFileName);     attachementDir=strAttachementId.substring (strAttachementId.length()-2,strAttachementId.length());
    System.out.println("Attachement dir"+attachementDir);     storedFileName=strAttachementId+"_"+part.getFileName();     System.out.println("Stored filename"+storedFileName);     OutputStream out=new FileOutputStream(strAttachmentPath+"/"+attachementDir+"/"+storedFileName);     InputStream in=part.getInputStream();          
    while ((len = in.read(buf)) > 0)
         {                           //System.out.println("content"+buf);
    out.write(buf, 0, len);
    in.close();
    out.close();
    Message was edited by:
    Vikas_Rathore_Patni

    Hi Vikas_Rathore_Patni
    I'm a student in Greece and I'm interested in the way this code of yours actually works. What i really want to do is to find a way of opening e-mail attachments and extracting them to a txt file. Are there any necessary tips for that ?
    I would really appreciate it if you could send me this code of yours in this mail :
    [email protected]
    Regards Marios

  • Buttons on toolbar do not work in Microsoft Office 2003 programs.

    I am using Adobe Acrobat Elements 6.0.  My toolbar buttons do not work in any of my Microsoft Office 2003 programs.  I can Print file and change the print file to Adobe PDF to convert, but it would be nice to be able to use these buttons on the tool bar.  When I run my mouse cursor over the buttons it tells me to "see Adobe PDF menu for settings."  Can anyone help me?

    Did the buttons previously work in Office 2003?
    The best information I could find is a troubleshooting guide: http://kb2.adobe.com/cps/317/317147.hml  Make sure your installation of Acrobat and Office are fully updated.
    As a side note, Adobe stopped developing Acrobat Elements in 2007. http://www.adobe.com/products/acrobatpro/acrobatel.html

  • KM Image file name for Microsoft Office 2003 documents

    We want to change the images which display for Microsoft Office 2003 files loaded into KM to something more recognizable, but we CANNOT find the image files for .XLS, .DOC, .PPT, etc.
    Any Ideas what they are called?  Are they in the standard image repository?
    Thanks!

    Hi Brian,
    the icons are saved under /etc/public/mimes/images.
    You can go to KM Content and upload there your own icons, You can either replace the SAP standard ones (ie: document.gif for .DOC) or you can change the KM Configuration (Content Management -> Utilities -> Icons) so that your own icons are associated with the MIME types you want to change. The second solution should be more upgrade safe in my opinion.
    Hope this helps,
    Robert

Maybe you are looking for