Microsoft Outlook Advanced Find

I use Microsoft Advance Find for my everyday job. We depend on it to work everyday. Wednesday January 1st the Advanced Find has not been properly working. When searching for emails or messages by a certain name it picks some names up and then it
misses other names. There is no consistency for what it is finding and not finding. I work for a company that has a IS Help Desk. We have been working with them since Wednesday the 1st and they have not come up with a solution for the problems we are having.
Any advise would be appreciated.

Hi,
What steps have you tried yet?
I suggest you rebuild the index in Windows:
For Windows 7: Start -> type "index" in the search field. At the top click on "Indexing Options". Click on
Advanced then Rebuild.
For Windows 8, 8.1: Search -> type "Indexing Options" in the search field. At the top click on "Indexing Options". Click on
Advanced then Rebuild.
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

Similar Messages

Understanding Advanced Find in Outlook and Exchange Online Mode

Hi,
we do see a behaviour in Advanced Find where I'm not sure if it is a bug or "by Design". This only happens when online mode of Outlook is used. Please do not advise to use Cached Moded as we are talking about a Remotedesktop-Services environment
and it is not possible to use Cached Mode here.
When we use "Advanced Find" in Outlook to find sent Messages by the name of the sender we are not able to just enter for example the last name of the sender and get results. As soon was we use the button "Sent to" and choose an account
from the GAL or own contacts we will see results. The issue is: Not all messages sent people are in the GAL or personal contacts. So the search is useless at all.
Search with just the last name - no results:
Search with User selected from the GAL (or local contacts) we will get results:
Is this a bug or "by Design"
Peter Forster | MVP Virtual Machine 2002-2011 | Austria |

Hi Peter,
What's the version of Exchange server you are using?
It seems that the searching hasn't finished from the first screenshot you attached. The
Stop button is still clickable.
According to my testing in my Outlook 2013 environment, it took a long time to finish the searching when using Online Exchange mode, however, it should work when searching with just the last name. This is a known issue that
Outlook Online
mode is having a considerable amount of delay when performing an
advanced search, and we haven't found a solid solution for this. Please wait until the searching finishing (the
Stop button become grayed out, just like it in the second screenshot), and then check if it returns any results.
Please let me know the result.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

HT204053 Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninst

Every time I try to access my emails on microsoft outlook I get a message from windows that mobileme services have stopped working. windows then tries to find a solution and says mobileme is not installed correctly. When I try to repair or uninstall via the control panel my pc cannot find the route????? I do have an iphone and ipad. What can I do?

The CrashIDs are what is needed. Do not attempt to attach or paste the reports.
#Run Firefox in safe mode does that prevent crashes ?<br/>[[Troubleshoot Firefox issues using Safe Mode]]
#Disable all plugins
#Repeat and this time try in Windows safe mode. use the F8 key <br /> http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
So you are saying it works ok as long as you avoid certain pages such as this Forum. That makes me wonder if it could be malware that is blocking access to assistance.Run malwarescans with multipe and up-to-date tools.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Outlook Contacts Advanced Find

Hey guys, trying to do a search of the "Department" field for the contacts in my GAL in Outlook 2010. Noticed however that I'm only able to search on the first word contained in the Department field for any particular user. If the department field
contains more than one word, I'm not able to search on it. (See screenshot).
For example, the attached screenshot shows a user whose Department is "Investor Services". If I search "Investor" in Outlook Contacts using Advanced Find, this user shows in the results. However if I search for "Services", I get no results. Exchange
server is 2007. Also getting the same results with a subsidiary company of ours who just moved to Office 365 (searching on the Department field only works for the first word in the field).
Tried posting the question in Exchange forums, since it seems like an issue with Exchange Search Indexing not indexing the entire contents of the field. (See
here). It was suggested I try the Outlook forum instead.
Anyone else have this problem? Is this by design, and if so, is there some kind of work-around other than downloading the GAL to my local contacts?
Shaun

Hi Shaun,
Per my test and research, this is by design.
Thanks,
Evan

Outlook 2010 Advanced Find Contacts Not Working

Some Outlook 2010 Advanced Find criteria work but the "email is not empty" and "email is empty" criteria return no results though there are contacts that have the Email field populated.

Hi,
Are you using Search Tools > Advanced Find > Advanced tab > Field > Email Fields > Email? Please make sure you selected the correct Contacts folder when you perform the search.
We can also try remove Outlook from the indexing location to check the result. To do this, click Search Tools > Search Options > Indexing Options > Modify > clear the check box before Outlook...
Please let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

Outlook 2010, Advanced Find, 'Where I am the only person on the TO line' not working

Outlook 2010 running in online mode with Exchange 2010 SP3.
When performing an Advanced Find, clicking the check box 'Where I am:' and selecting 'the only person on the To line', the search results return email messages where there are multiple people in the To
line.
Does anyone have any insight on this, and is there a custom search I can perform for similar results in the Advanced tab?
Thank you

Unable to repro it here. What if we enable cached Exchange mode, will this issue continue?
In addition, meeting items will ignore the 'Where I am: the only person on the To line' criteria when searching. Make sure these search results are not meeting items.
Flynn

I am running Microsoft Outlook for Mac 2011 and all my tasks on my imac are gone. I can create new ones but cannot find my old ones. I have tried to rebuild the database but I get an error message with [-18000] code

I am using Microsoft Outlook for Mac 2011 and in the last two weeks all my tasks disappeared. I have tried to establish a new identity but the database will not rebuild (error code [18000]. I have tried to restore a backup from time machine but get the same problem. Any help would be appreciated

Not very many Outlook users here. You'll to better asking in Microsoft's Office:Mac forums here:
Office for Mac forums

BlackBerry Internet Service with Microsoft Outlook Web Access account

I need to switch my 8820 to a new work account. They use Outlook Exchange 2003, but do not support BES. I have access via both regular desktop Outlook and also Outlook Web Access (from a different server). I read the procedure to use BIS in KnowledgeBase KB03133. After entering my email address and password, I get a message that it was successfully set up. But, I get no e-mail messages delivered. When I check the settings, it looks like it is not using the correct server for Web Access. However, I can find no way to manually enter it - I don't get the error message described in Step 5 where I can pick "I will provide the settings." I try to set up via computer but I get a message that my BIS cannot be accessed via HTML and need to set up on my BB.
Any suggestions? Would it work with a newer phone running a newer OS? Do I need to check with AT&T if it supports Outlook Web Access? Thanks in advance.

Hi and Welcome to the Forums!
Lot's of possible variables...here a several other KBs to try:
KB03133How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
KB18567BlackBerry Internet Service cannot connect to a Microsoft Outlook Web Access account using Microsoft Exchange 2007 or Microsoft Exchange 2010
KB15173Locate the mailbox name for a Microsoft Outlook Web Access 2007 email account
KB04804Error message appears when attempting to integrate a Microsoft Outlook Web Access 2010 account
KB02858Unable to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
The trick to getting to the manual settings screen is to provide your valid email address, but an incorrect password...then, it will allow you to manually enter the settings.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Outlook advanced search & Exchange 2013 - "Sent to...." field doesn't work correctly in online mode?

Hello,<o:p></o:p>
We've come across what seems to be a problem with advanced find in Outlook in online mode, when used with Exchange 2013.
Using the "Messages" tab of "Advanced Find", anything typed into the "Sent to...." field produces no search results. If the field is populated by clicking
"Sent to..." and selecting a name from a contact list or GAL, results are returned.
eg.
Sent items contains messages to "Charlie" who has the email address
[email protected] and sender is
"Dave" who has the email address
[email protected]
Entering "charlie" or
[email protected], (or any previously acceptable partial term such as "charl" or "@contoso.com") into the "Sent to"" field produces no results. If the user exists in a contact
list and is selected from it, the search works fine. The same is true searching the inbox, using the local user's id of "Dave" or
[email protected]
We've confirmed this issue occurs at four client's sites, plus our own internal Exchange 2013 CU3 system. Four of the sites have been transitioned from Exchange 2010, the fifth was a completely new installation. The problem occurs with Outlook
2007, 2010 and 2013.
This works fine in cached mode (not a solution as our clients are predominantly Citrix/RDS). Exchange search doesn't report any issues and the index states are all "healthy",
we've also tried rebuilding the indexes with no improvement.
Any ideas would be appreciated, or even if someone else can confirm they see the same thing.
Thanks.

Hi Winnie,
Thanks for your reply, and I'm sorry I've not responded earlier. While this problem is one that's annoying several of our clients, and while I have been doing further testing and investigation, it's had to take a back seat to other more pressing issues
until now.
OWA search works fine, as does using "From:" in instant search, and the "From" query on the Advanced tab in Advanced Find. The search services have been restarted, indexing state and copy status etc are all healthy, the indexes
have been rebuilt/reseeded, and I've gone through the diagnostics again. Nothing is logged in event viewer, and the only error that comes up when checking failed index docs for a user are for unsupported format handlers (.png etc).
The issue seems purely to be with the "Sent to..." field on the Messages tab, it's as if it gets completely ignored. The search returns instantly with "There are no items to show in this view". Just to make sure I wasn't losing
my marbles, I've compared searches on Exchange 2007 and 2010, and on those I can enter as little as a single letter or email domain and receive the expected results. On 2013 I get nothing whatsoever whatever I enter, unless I pick an address from a contact
list.
At this point, I thought that since Office 365 is Exchange 2013 based it'd be worth testing that, and sure enough I got exactly the same issue. I setup an Office 365/Outlook 2010 profile on a machine that is currently in an existing Exchange 2010
environment where search works correctly, searching Office 365 doesn't work on that either.
EDIT - Ignore this bit, a fresh install of Windows 7 and Office 2010 doesn't work with Office 365 either. I am exploring another avenue. I setup a fresh Windows 7 VM, installed Office 2010 and connected that to Office 365, search worked fine,
so I'm now looking into what the difference with that VM and the servers and workstations out "in the wild" could be. For example, the test VM isn't on a domain, it's not fully patched, it has no additional software installed etc. Outside
of Microsoft applications and operating systems and having similar configurations, I haven't isolated a common link across all of our client sites that are affected, there's no single 3rd party application or anti-virus solution in place at all of them for
example.
I'll update with any findings, but if you or anyone else has any idea in the meantime I'd be grateful for your input.
Regards.

How do I sync my Microsoft outlook calender to my handled?

Need some serious help here! I am brand new user of a PDA (Zire 31.) I have a microsoft outlook account through my work and I know that I can sync my calender to my handheld, however I cannot figure out how to do so. Can anyone please point me in the right direction or give some simple instructions on how to do it? Thanks in advance.
Post relates to: Zire 31

No stores that I know teach Palm OS...
You do have a User Manual on your Installation Disk in pdf format. That's how most of us here learned how to operate our devices.
Online, you can find it on the Zire31 support pages, or at this link: http://www.palm.com/us/support/handbooks/zire31/Zire31_UG_ENG.pdf
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Specifying Categories in Advanced Find

I'm not an IT professional, but I was
advised to ask this here (moved from Microsoft Community).
I use Outlook 2010 and the "Advanced Find -> Query Builder" tab for advanced searches. I have emails with colour categories. The categories have labels assigned in the normal way, such as red="awaiting
response", blue="urgent", purple="project X", etc.
I want to specify a query/search with one condition being "Categories doesn't include 'project X' " or
"Categories doesn't include [purple category]". (Basically I know all about project X and by definition anything with that category isn't relevant.) So the results would include items that have no categories, or any combination
of categories, but would exclude items in purple category.
I've tried the expected "Categories doesn't include [...]" with the value as "project" or "project x" or "purple" but it's not doing anything.
What should be typed in a query builder query, to specify a more precise condition, of the format
   Field = <Categories>
   Condition = <doesn't contain>
   Value = ????????
in Outlook 2010?
Thanks!

I've tried the expected "Categories doesn't include [...]" with the value as "project" or "project x" or "purple" but it's not doing anything.
This condition should work in Outlook. Please make sure you have finished the following two steps when searching:
1. Make sure you have properly set the search scope.
2. Make sure you have clicked the Add to List button after you defined the criteria.
Then, you can click Find Now button to search the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can't open microsoft outlook messages

I am able to logon to my work e mail via the internet an view a list of e mails. However I am unable to open them or delete them (the lock uptop is locked). Directions say to go to advanced options and click "TCP" However I can't find "TCP". Can anybody help me open my microsoft outlook e mails via the internet?

Is this on your PC or phone?
What model?
Which browser are you using?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Microsoft Outlook web based email help

Help! I have a microsoft outlook web based email account at work. I'm trying to get it to work with my iPhone. They dont provide the outgoing server info. I can get to it through the internet, but it takes time. I'd like to set it up as a normal email account. Any thoughts? I had it working with my old blackberry, but that had a computer site that assisted with it. PLease help....love the iPhone so far, with this one bumb....
Thanks in advance.

sunchick444 wrote:
I would think that this is a very important issue to resolve on the part of Apple in order to better serve its corporate and business customers across the country.
But that is just it. The iPhone is not intended to be a corporate phone nor did Apple make the claim that it was supposed to.
I am glad that I am not the only having this problem, however I bought this phone for the specific reason of having increased access to my calendar and email and I am very disappointed to now find that the Microsoft Exchange server is not fully or appropriately supported.
Apple has been very public ever since its release on what email systems it supported.
The associate at the Apple store in Tampa that I spoke with assured me that the iPhone worked seamlessly with Outlook but failed to mention any potential issues with the Microsoft Exchange Server.
That is because outlook and exchange are two very different things.
This issue needs to be resolved or there will be plenty of very unhappy business men and women.
Who are not part of the iPhones targeted user base.

Forwarding mails from SAP inbox to Microsoft Outlook

I need to forward notifications in SAP workplace to Microsoft outlook...anybody worked upon,,??
any function module which will capture the mails in mailbox...how to do??
Thanks in advance....

Hi sap technical
Procedure:
Go to the Business workflow ...then follow the below steps ...!
its kind of configuration needed in the SAP System no coding required.
Step1..go to the Business Workplace
Step2..
Access the settings by choosing SETTINGS - OFFICE SETTINGS.
Choose the automatic forwarding tab.
Here you can create new forwarding rule using the create button.you will get new window then..
Step3...
Insert your email address into the forward to field and choose External address from the drop down box.
Choose the time period of this forwarding rule. In this example want to keep this forwarding for a long time.
Step4....
If you dont want to keep copies of received SAP office mails remove the option.
Choose copy to save the values
If your email address is already maintained in your user profile you will receive a following pop up
Step5...
Now you can save the new forwarding rule and all of your SAP Office mails will be forwarded to you outlook inbox.
You can also remove the forwarding rule anytime you want.
Sample Code :
Find the below code.
DATA : RECEIVER TYPE SOMLRECI1 OCCURS 1 WITH HEADER LINE,
S_DOC_CHNG TYPE SODOCCHGI1,
S_OBJECT_ID TYPE SO_OBJ_ID.
need to fill up the following compulsory
1. S_DOC_CHNG-OBJ_DESCR = 'Mail subject line here'.
2. RECEIVER-RECEIVER = '[email protected]'.( or as per ur requirement ).
3. RECEIVER-REC_TYPE = 'U'. "Internet address
4. S_OBJCONT contains the content of the mail.
you have to append it.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = S_DOC_CHNG
DOCUMENT_TYPE = 'RAW'
COMMIT_WORK = 'X'
IMPORTING
NEW_OBJECT_ID = S_OBJECT_ID
TABLES
OBJECT_CONTENT = S_OBJCONT
RECEIVERS = RECEIVER
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if found helpfull,
Cheers,
Chaitanya.

Microsoft outlook Integration with portal

Hi,
I have faced a problem when i try to implement N51 : Microsoft OutLook Integration in Best practices for Portal.
I am bit confused about the following points given in the document. can i know how to follow these steps:
1.Switch to Windows Explorer of the SAP NetWeaver Portal system.
2.Locate a server that is on the same trusted domain as the Microsoft Exchange Server with Internet Information Server (IIS) installed.
3.Copy the MSX-A Component files that came with the Exchange Transport and copy the files to the IIS server (that is C:\SAPExchangeTransport). The MSX-A components are found at <drive>:
usr\sap\<SID>\<Instance>\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange
(for example C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange).
4.Double click SAPPXchTest.exe
This launches SAP EP Test Exchange Transport Setup
5.Choose Tools -> DLL -> Register
Configure IIS
6.Open the Internet Service Manager.
Without Single Sign-On
To create and configure an IIS Web Site without single sign-on, proceed as follows:
1.Create a new Web site with the name SAPExchange and make a note of the port on which this site is running.
2.Set the permissions to execute.
3.Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport
4.Open the properties dialog box for the new Web site, and choose the Directory security tab.
5.Deselect all Authentication modes.
6.Select Basic Authentication.
7.Confirm with OK.
With Single Sign-On
To create and configure an IIS Web site with single sign-on, proceed as follows:
1.Select the Web site where the SSO2KerbMap ISAPI module is installed and configured.
2.Create a new virtual directory with the name SAPExchange beneath this Web site
3.Set the permissions to Execute.
4.Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport.
5.Open the properties dialog box for the new Web site, and choose the Directory security tab.
6.Deselect all Authentication modes.
7.Select Integrated Windows Authentication.
8.Confirm with OK.
Next, i am having these problem also :
when i try to configure calendar repository(choose System Administration -> System Configuration
-> Knowledge Management -> Content Management -> Repository Managers -> Calendar Repository. ), then i am getting the following error.
" st="b" class="urMsgBarErrBtm" id="MessageBar43b8feb2" ct="MB"> Inside the area "/cm/utilities/acl_factories", unable to find the configuration object "acl_jdbc_rep" referenced by the property "securitymgr.aclcfg" of the configuration object ".../Calendar Repository/ExchangeCalendarRepository".
Thanks in Advance
Regards,
Raju

Hi,
I have faced a problem when i try to implement N51 : Microsoft OutLook Integration in Best practices for Portal.
I am bit confused about the following points given in the document. can i know how to follow these steps:
1.Switch to Windows Explorer of the SAP NetWeaver Portal system.
2.Locate a server that is on the same trusted domain as the Microsoft Exchange Server with Internet Information Server (IIS) installed.
3.Copy the MSX-A Component files that came with the Exchange Transport and copy the files to the IIS server (that is C:\SAPExchangeTransport). The MSX-A components are found at <drive>:
usr\sap\<SID>\<Instance>\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange
(for example C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange).
4.Double click SAPPXchTest.exe
This launches SAP EP Test Exchange Transport Setup
5.Choose Tools -> DLL -> Register
Configure IIS
6.Open the Internet Service Manager.
Without Single Sign-On
To create and configure an IIS Web Site without single sign-on, proceed as follows:
1.Create a new Web site with the name SAPExchange and make a note of the port on which this site is running.
2.Set the permissions to execute.
3.Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport
4.Open the properties dialog box for the new Web site, and choose the Directory security tab.
5.Deselect all Authentication modes.
6.Select Basic Authentication.
7.Confirm with OK.
With Single Sign-On
To create and configure an IIS Web site with single sign-on, proceed as follows:
1.Select the Web site where the SSO2KerbMap ISAPI module is installed and configured.
2.Create a new virtual directory with the name SAPExchange beneath this Web site
3.Set the permissions to Execute.
4.Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport.
5.Open the properties dialog box for the new Web site, and choose the Directory security tab.
6.Deselect all Authentication modes.
7.Select Integrated Windows Authentication.
8.Confirm with OK.
Next, i am having these problem also :
when i try to configure calendar repository(choose System Administration -> System Configuration
-> Knowledge Management -> Content Management -> Repository Managers -> Calendar Repository. ), then i am getting the following error.
" st="b" class="urMsgBarErrBtm" id="MessageBar43b8feb2" ct="MB"> Inside the area "/cm/utilities/acl_factories", unable to find the configuration object "acl_jdbc_rep" referenced by the property "securitymgr.aclcfg" of the configuration object ".../Calendar Repository/ExchangeCalendarRepository".
Thanks in Advance
Regards,
Raju

Microsoft Outlook Advanced Find

Similar Messages

Maybe you are looking for