Microsoft outlook has stopped working, close program, windows will check for solution

outlook 2007, running window 7, office suite home and student 2007
Outlook starts but then states it has stopped working and closes............
Please any one help me for solution this problem.
Email: [email protected]
Chittagong, Bangladesh.

Hi,
Please try to open Outlook in safe mode to check if the problem will continue. To do this, exit Outlook, press Windows key + R to open the Run command, type:
outlook.exe /safe and press Enter. If the issue would be gone in safe mode, Please disable suspicious add-in in your Outlook to resolve the problem. See:
http://office.microsoft.com/en-in/outlook-help/enable-or-disable-add-ins-in-office-programs-HA010034127.aspx
We can also try to create a new mail profile in Control Panel to check the result. To do this, please refer:
http://support.microsoft.com/kb/829918
If above didn't fix the problem, please try to run a repair of your Outlook installation and then test the problem again. See:
http://office.microsoft.com/en-in/help/diagnose-and-repair-crashing-office-programs-by-using-office-diagnostics-HA001234076.aspx
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

Similar Messages

Append Emails - "Microsoft outlook has stopped working...". Help !

64 bit
windows 8.1
outlook 2013
acrobat XI (eleven) Pro
Outlook normal, no add in. Have to run as administrator. Lose search facility and other problems but at least the Add in icon is there.
Trying to Append files or create using the Add in icon in Outlook (in Administrator mode).
"Microsoft outlook has stopped working". " Windows is checking for a solution to the problem".
What's the problem?
Also unrelated have this message " only one version of outlook can run at same time". Not sure if relevant.

Hi,
1. The current version of Acrobat 11.0.09, you check your version, go to Help menu --> About Adobe Acrobat
2. Append an email to existing pdf, i assume you mean attaching email as pdf to an existing pdf document.
       For that you can follow steps below:
         a. Convert email as pdf, like you know. Once the email get converted to PDF it has portfolio like structure. So you can click on "Open File" like shown in screen shot attached below.
         b. Then how to attach a file with existing pdf you may check steps mentioned in this link: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7ca6.w .html
~Ajlan Huda.

ITunes Store access causes "iTunes has Stopped working...Windows is check..

When accessing iTunes Store from iTunes, which has worked well for several years, it stops half-way through progress bar and then I get the "iTunes has Stopped working...Windows is checking..."..then " A problem caused the program to stop working correctly. Windows will close the program and notify you..."
Probably not a related problem, but also, when synching with an iPhone that I recently reset, copying just 188 tracks in selected playlists to transfer to the iPhone, the copying stops and hangs after just a few tracks, so this is unsuccessful too.
Another iPhone worked a synch but fewer tracks to download!
I've uninstalled and re-installed iTunes 9.2 etc - doesn't fix problem. Any help please?

Wow, that is crazy .... but it worked! Thanks for taking the time to post that up as I would never have even dreamed of thinking that the display drivers would stop iTunes working... that *****.
For any one else - this was Windows Vista on a Dell inspiron, went to Start menu-> Settings-> Control Panel-> Device Manager -> Display Adaptors -> right click on ATI Radeon (in my case) and then "Update driver software" and let windows search the web

Everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed

everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed

Hello mcgivnma,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario

400-034 PC keep getting "Internet Explorer has stopped working (close program)" message.

Pavilion Slimline 400-034PC
Continually getting this message: Internet Explorer has stopped working (etc. close program), the screen will close and immediately open right back up. Driving me crazy!!
Can't download anything.
Yahoo Mail is not working properly either.
I'm thinking I should return this PC as its still under warranty.

Please try the troubleshooting steps in the following weblink to resolve the issue:
HP PCs - Resolving Issues in Internet Explorer (Windows 8)
This document contains helpful information to resolve issues that can occur when using Internet Explorer
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

After downloading it says it has stopped working and that windows will notify me when a solution is available it happened after i updated

after i updated my mozilla wont start up and just says it has stopped working and windows will alert me when a solution has been found.

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

Error Message: Adobe Reader has stopped working correctly. Windows will close the program and notify you if a solution is available. I have uninstalled the reader program and reinstalled the reader program. The same error message appears. Help

Does anyone have an answer to the above error message?

Can you open Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

CommandCenter has stopped working. (close program)

Hello,
Please for anyone reading, I really need your help....
I just built a brand new computer from the ground up, and I purchased this new z97 MSI GD-65 Gaming motherboard to go with it. Now everything works EXCEPT the MSI command center program which keeps crashing 1-2 seconds after launching every time.
It used to work just fine the first week or so after I built the computer. However, around the time of installing a Corsair H110 water cooler, the MSI command center started crashing. I have tried many different versions of the command center, and many different updates, but it still keeps crashing every time.
I think (maybe?) it could have something to do with changing to the water cooler? I'm not positive about this but it is somewhat of an educated guess... Because when I first finished the computer, and installed MSI command center, I had the CPU FAN connector on the motherboard going into the stock CPU fan that came with my processor, and then about a week later when I upgraded to a water cooler, I removed the stock CPU cooling-fan, and installed the corsair watercooler in its place. Then I hooked up the CPU FAN connector on the motherboard, to the new CPU FAN connector on the water cooler. That is around the time MSI command center started crashing.
I think (maybe?) after launching command center, the computer is trying to detect the speed of the old stock CPU cooling fan, to measure its workload, and since the old fan is gone now, and it's a water cooler now, it freaks out and crashes the command center.
Does anyone have any ideas to help me? I really want to start over-clocking with my new water cooler, but I cant monitor the temps or anything b/c the command center keeps crashing. Right now there is zero overclocking and absolutely nothing has changed settings wise from when I changed from the stock CPU fan to the water cooler. I have not touched anything else, or changed any settings at all. The only thing that has changed since it was working was me installing the watercooler.
Also the watercooler is installed correctly, it is keeping my CPU extremely cool 35-40 degrees celsius even under extreme gaming, so I know it's installed correctly. I've also googled the problem and seen this thread https://forum-en.msi.com/index.php?topic=180757.0 and many other threads about other people having the same problem... even without a water cooler. So it seems to be the problem is more related to MSI, and in some cases was fixable by MSI releasing an updated version of the software.
Please.... if anyone reads this.... I really need your help!

Also I've seen you request the MSILoading.log in previous threads so I will just go ahead and preemptively post mine.
[OS]
Bit=64
CultureInfo=English (United States)
OSVersion=Microsoft Windows NT 6.2.9200.0
[Loding]
step=3
StartAP=ok
create=ok
service=ok
startTime=ok
createType=ok
createMB=ok
Frequency=ok
Ratio=ok
VCore=ok
DRAMFreq=ok
GPUMFreq=ok
createItem=ok
InitMB=ok
InitOCGnie=ok
Backgourd=ok
Temp=ok
GetWMIRequest_OSver1=Microsoft Windows 8.1
GetWMIRequest_OSver2=Microsoft Windows 8.1
InfoText_FromArgb=ok
InfoText_OS=ok
InfoText_BIOS=ok
InfoText_CPU=ok
InfoText_Model=ok
InfoText=ok
PageBar=ok
VSME=ok
LR_Arrow=ok
ThumbRight=ok
Tag=ok
DASL=ok
ASI=ok
CPUFreq=ok
CPUFan=ok
CPUVol=ok
Other=ok
MainPage=ok
SaveFan=ok
InitPage=ok
GPU=ok
RAMDisk=ok
OCGenie=ok
MBDelay=ok
Delay=ok
[SaredMemory]
OC Genie=ok
Channel=ok
RefVol=ok
Vol=ok
Command Rate=ok
Other=ok
OffsetVol=ok
Fan=ok
TCL=ok
TRCD=ok
TRP=ok
TRAS=ok
TWCL=ok
BCLK=ok
Ratio=ok
RingRatio=ok
GPUFreq=ok

Outlook 2013 - MS Outlook has stopped working... (sending Email)

Hi everyone, this one is extremely frustrating and hoping you can help.
My colleague has Outlook 2013 running on Win7 Pro. There are two different mail account, both Exchange server.
Everything works fine except Sending mail. Every time we attempt to send an Email Outlook crashes with the following error:
"Microsoft Outlook has stopped working... A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I say every time, but it has occasionally sent Email. Never more than once after starting up Outlook and most often, never.
The accounts work for using OWM. The accounts work fine configured identically on a different PC.
Tried Safe Mode. No help
Uninstalled all AV software. No help
Ran Office Repair (both Quick and Full). No help
Short of completely uninstalling Office, re-installing and recreating the profile from scratch (which I would like to avoid) I'm not sure what else to try!
Any suggestions would be most appreciated.

Hi,
In case there's a corruption in your Outlook Data File, please try to repair the data file(.pst or .ost) and check the result:
http://support.microsoft.com/kb/272227
If you have setup two different Exchange Accounts in one Profile, please try to remove one from the profile, create a new profile to setup the account.
http://support.microsoft.com/kb/829918/en-us
Check if the issue persists with two different Profiles.
Regards.
Melon Chen
TechNet Community Support

"Skype has stopped working" Error Message Windows 8.1 Skype 7.6

Hi, I just now installed the desktop version, I was previously using the other Windows 8 version, not sure what it's called but that doesn't matter. I was trying to call my friend and it said there was a problem with my mic. Well I bought a new mic and came home and it said there was a problem with my mic. I uninstalled it and installed the desktop version, thinking it would work better, but the desktop version tells me that it cannot detect my soundcard and to reboot my laptop. Upon starting up at the welcome screen, I continued to log in, and wait for my programs to load up. I opened skype, it closes without showing up, three more times I do this before running as admin. It tries to load and then gives me the crash report "Skype has stopped working" and says windows will let me know when they find a fix.

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

"iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."

Whenever I connect to the iTunes store i receive an error message "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This causes iTunes to close. I am using iTunes version 10.5.0.142 on a Windows Vista (64) PC. I have reinstalled iTunes selecting the "repair" option and also uninstalled and reinstalled iTunes. Any help will be deeply appreciated. Thank you. Below is the result of the diagnositc.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
HP-Pavilion BN474AV-ABA HPE-150t
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 002FAD94098CD0E0
Current user is not an administrator.
The current local date and time is 2011-11-13 22:08:54.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2cb3fff3fa771d265b0f8ffdcca13b55
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {F4A2029C-16AA-4BDF-8DB7-9EC2A75B5991}
Description: Realtek PCIe GBE Family Controller
IP Address: 192.168.1.6
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Nov 13 21:09:29 2011
Lease Expires: Mon Nov 14 21:09:29 2011
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-13 22:02:08.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: hp DVD A DH16ABLH, Rev 3HD9
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 15:40 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: hp CDDVDW TS-H653R on CDR media at speed 24X.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
Bruce's iTouch, iPod touch (2nd generation) running firmware version 4.2.1
Serial Number: 1C9053CC201
**** Device Sync Tests ****
Sync tests completed successfully.

Same exact thing with me. And no help from apple. Just dropped nearly $600 and cannot get a decent working setup.
Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
The crash happens only on iTunes store access.

Microsoft Lync has stopped working ... please close the program

The following error message has displayed when I logon to Windows 7.
Lync starts up at the same time with Windows:
This error message shows "Microsoft Lync has stopped working ... please close the program".
However, Lync is working fine even after I click on "close the program. The detail information on the error message is as below:
Faulting application name:   UcMapi.exe
version:
4.0.7577.0
time stamp:
4cc138ea
Faulting module name:         MSVCR90.dll
version:
9.0.30729.6161
time stamp:
4dace5b9
Exception code:                        c0000005
Fault offset:
0003b4a8
OS version:
6.1.7601.2.1.0.256.27
Locale ID:
1041
There are no tangible ill effects, however, I want to know the error reason.

Hi,
Please try to uninstall the default Sound Card, VGA Device/Video Card, Graphic Card. Then restart Lync 2010 to test the issue.
Please try to uninstall the latest Lync 2010 update (especially for the Security Update), then restart Lync 2010.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

TS1717 Ever since I downloaded and installed iTunes64Setup.exe v. 6.0.1, it crashes on my Windows 7 system, with the useless message, "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program an

iTunes64Setup.exe, even after multiple times of uninstalling and reinstalling with even a fresh download crashes with the message:
"iTunes has stopped working. A problem [unspecified] caused the program to stop working correctly. Windows will close the program and notify you IF a solution is available." I cannot get out of this loop and it renders my iPad HD useless. I tried calling the Apple Store but was referred by an automated system to this web site. I tried looking up the problem in the FAQ but it didn't help.
merylew

Hi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

When I try to open iTunes,it tries to start but than I get a message stating-iTunes has stopped working , close the program. Does anyone have a problem like this? I'm using windows 7 compatibility turned off.

I'm using a Dell PC with windows 7. Apple Store cannot open completely. An error message states- iTunes has stopped working, close the program.
I have spoken to at least 3 Techs with no solutions found for this problem. Compatibility mode turned off. Newest Download from Apple site.

See HT203206: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Windows 8 - Photoshop CS5.1 crashes upon startup. Error message: "Adobe Photoshop CS5.1 has stopped working.A problem caused by the program to stop working correctly. Windows will close the program and notify you if a solution is available."

Hello!
I've had the student version of the Adobe Creative Suite 5.5 Design Premium software for several years now.
When I received my Windows 8 computer I installed the software with no issue.
Last week when I tried opening Photoshop I get the following error: "Adobe Photoshop CS5.1 has stopped working.A problem caused by the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I deactivated and uninstalled the entire Creative Suite then reinstalled it. I am able to open the other programs, but still receive the same message for Photoshop.
What can I do?

I found the issue was with the Nik Filters I was using. The filters were messing with Photoshop's initializing. I uninstalled and reinstalled the filters and now Photoshop works like a charm.
It appears this forum is dead?!
Thankfully, I was able to troubleshoot on my own and figured out the problem...

Microsoft outlook has stopped working, close program, windows will check for solution

Similar Messages

Maybe you are looking for