Microsoft Patches for Call Manager

HELP !!
Where do I find the "approved" Microsoft patches for CCM4.x please ?
Regards
Scott

Hi Scott,
You will need a valid CCO account (which I guess you've already got). Then just go to the support section on the Cisco website, choose "download software", then just specify your CCM version etc. and you will see all the patches available.
Cisco guarantees that they will release any critical operating system patch within 24 hours of the Microsoft announcement. Noncritical patches are rolled up into a monthly update.
Please rate if useful....

Similar Messages

Phone License for Call Manager express

Dears ,
Is the phone license required for Call manager express or the license on the voice gateway enough for operating the phones ?
Regards,

Hi Ian,
I think I may have given you some bad info here. Sorry about that
Right to Use Feature Licenses
The following licenses do not Cisco software activation and you can begin using the features upon receipt of the Right to Use Notification
Feature License Name
Prerequisites
License Types
CME
IP Base & UC
Feature (Counted)
SRST
IP Base & UC
Feature (Counted)
VXML Gateway
IP Base & UC
Feature (Counted)
CUBE
IP Base & UC
Feature (Counted)
Land Mobile Radio
IP Base & UC
Feature
You should be good to go. But a quick note to
[email protected]
would be a fair idea.
Cheers!
Rob

Need to take MIB File for Call Manager

Hi,
Can anyone help me how to take MIB file for Call Manager. We have a cluster of 6 CUCM servers (1 pub + 5 Sub). we need this MIB file for monitoring purpose. If you need anyother information regarding this please let me know.

Hi
Below MIBs are supported in CUCM. Refer the link attached for details. Btw which Version are you running ?
•CISCO-CCM-MIB
•CISCO-CCM-CAPABILITY
•CISCO-CDP-MIB
•CISCO-SYSLOG-MIB
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/managed_services/cisco_mibs.html
Thanks.

7975 firmware for call manager express

i would like to add 7975 phone to call manager express.
where do I get the firmware for 7975 for cme?
i tried from software.cisco.com but it's for call manager only.

Hi pranavluhar,
check this link cme-153-3Mv2.rar (in 10.0 option).There is a 7975 version for CUCME.
Hope this helps.

Config Archive for Call Manager

Hello,
It give me the attahced error fo r config archive for call manager.

The supported devices page shows each supported device, and what features are supported:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html

Microsoft patches for Office 2007 applications . . . . .

How do I get the MS Office 2007 extensions (.docx, etc) to open and be readable without going to textedit? I have downloaded the Microsoft patches, but apparently they are not being placed in the correct file to automate the process. Can anyone help. Thanks. jn

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office. Please post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

MOH Sources for 2 800 #'s for call manager

Hey all,
How would i go about configuring 2 MOH sources for 2 different 800 numbers coming into call manager?
Im stuck at trying to find the location in call manager where the 800 numbers are configured?
Where abouts would you be able to see what incoming pri configurations are in call manager or am i looking in the wrong place.
Bascially, i want to use a different MOH source file for a second 800 number.
Thank you everyone!

What you translate is dependent on what the telco is sending you and the value configured for Significant Digits in the gateway configuration. If the telco sends you 10 digits and the Significant Digits field is set to All, then you would translate the entire 800 number.
For Unity, you configure MOH using the device pool of the Unity ports. You can configure the device pool under System -> Device Pool and assign the device pool to the Unity ports under Feature -> Voicemail -> Cisco Voice Mail Port. So, to have 2 different MOH sources for your 800 numbers, you would have to have 2 device pools assigned to 2 sets of voicemail ports and ensure that the numbers get translated to a hunt pilot that uses the proper ports.
Brandon

API for Call Manager Backup

Hello All,
Is there any API available to take the back up from Cisco Call Manager (ranging from the version of 4.0 up to 7.0). My aim is to develop an application either in .NET or Java to take the back up from the call manager and restore the same.
I could get some information on Cisco Back up utilities. But for the automation purpose I am looking for using API in application so that it can be triggered at the desired time automatically.
Thanks and regards,
Ram

Hi Ram,
You may want to post this question under "IP Telephony" community. This is where call manager questions are posted.
thanks,
Hitesh

Unfied Meetingplace for Call Manager Express??

Hi! I was told that Meetingplace express is being End Of Life, can you tell me if I can install the recommended Unified MeetingPlace for a new Call Manager Express 8.0install? If so, can use a use a MC7825 server and licenses but what licenses?!?! I'm a little lost here...
THANKS in advance

can you tell me if I can install the recommended Unified MeetingPlace for a new Call Manager Express 8.0install?
Yes with limitations per the SRND: http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/srnd/8x/confernc.html#wp1057454
If so, can use a use a MC7825 server
No. You need at least an MCS7835: http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_System_Requirements_for_Cisco_Unified_MeetingPlace_Release_8.0#Table:_Supported_Cisco_MCS_and_Third-Party_Equivalent_Servers_for_the_Application_Server
licenses but what licenses?
I hope you have UCSS coverage left on MPE. The problem is that MP8 and beyond are no longer stand-alone systems; they all require WebEx for the web conferencing. MP8 only provides audio/video conferencing. If you have a WebEx Node for MCS you also get an inside-the-firewall WebEx cloud attachment point for clients. A WebEx contract is required though. Remaining UCSS coverage should provide you that for free through the conclusion of the contract.
Oh, and MP8 starts at 200 ports. Most MPE customers probably are a better fit for straight-up WebEx MC.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Licenses_for_your_Cisco_Unified_MeetingPlace_System

Newest patch for call of duty 5 world at war..

Can anyone tell me when the newest patch for cod5 waw dd(1.6) will be available for download?
thanks to any replies!!

If you buy from best buys download it comes from Digital Rivers which is crap bcuz it takes forever to get the patch or they dont even have all the patches on the site. For instance my sp version is different from my Mp version when they should both b the same. the page that is suppose to have the patches doent even come up any more unless the url has change I havent been able to find it as yet.And if you try to contact DR they ignore your request like you never sent it I have tried this several times with no luck.
Best buy stop using DR goto someone else more reliable when it comes to your downloadable games. I will never buy a game from BB again till they change who they use.

Applying a patch for calc manager

This patch is said to be applied on the HFM web server.
Then the first step is to stop the Internet Information Server and Calculation Manager Web Server.
So I went to the server manager on the HFM web server, found the IIS manager and stopped it. Is that right?
For the Calculation Manager Web Server, I'm not quite sure what to do. Any help would be appreciated. I"m usually a functional application person but I got no internal help from application support now. Thanks!

This patch is said to be applied on the HFM web server.
Then the first step is to stop the Internet Information Server and Calculation Manager Web Server.
So I went to the server manager on the HFM web server, found the IIS manager and stopped it. Is that right?
For the Calculation Manager Web Server, I'm not quite sure what to do. Any help would be appreciated. I"m usually a functional application person but I got no internal help from application support now. Thanks!

Microsoft Patch for OWA 2007 CRES Secure Mail Recipients

CRES Secure Envelope Recipients attempting to open the CRES Secure Envelope through Microsoft OWA 2007 will need to enable the server side administrative option to disable the HTML/XML filter. Though this HTML filter option will be officially released in the yet-to-be-released Microsoft Exchange 2007 SP1 Rollup 8, Microsoft customers can request an interim patch from Microsoft. How and when to contact Microsoft Customer Service and Support: http://support.microsoft.com/kb/295539

I had this same issue, except I have Symantec mail security not Forefront. It wound up being a line in the adult content filter. For whatever reason, they included "If you received this email" as one of the literal strings. This is probably part
of almost every corporate confidentiality clause I have ever seen!! go figure......
Thanks for the event log hint- since I have the adult content set to delete, I had no good tracking mechanism in Exhange or SMSME. I set email notifications for the future on these.
Brent
I had this same problem, but I have ESET Mail Security Server. in some one case the problem y solved if I attach the "user@domain" in the "white
List". But in many case the problem is continuous. I have Exchange 2007 in MS Windows Server 2003.
Thanks for yours help.

Acceptance Critria for Call Manager

Dears
I need a help for a template for acceptance critria for all function can be tested throgh the call manager

The supported devices page shows each supported device, and what features are supported:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html

What is the best cisco ip phone for call manager and ipcc practicals

Hi i have recently started my training on Cisco Call Manger and CCIE voice from a leading cisco voice training institute (http://networkerszone.com/), and am working on 7900 series phones, is there any other phone that i should use or this is fine.

Naval,
7900 phones are good enough for both CUCM & UCCE. UCCE however doesnt support all models of 7900 series, please refer UCCE Compatibility Matrix for supported phone models.
You may also use CIPC as agent phone.
GP.
Pls rate the post if it helps !!

WLC 2504 - Issue with using Microsoft NPS for Radius Management Login

Hello,
In our environment we like to have our network admins and engineers use their Active Directory credentials when logging into devices so we can log who logged into which devices and if any changes were made. To do this we use a Server 2008 R2 NPS server with all our routers, switches and ASA's. We recently purchased a WLC to begin adding wireless to our environment. (See WLC_Radius_Config.png and NPS_Radius_Config.png)
On the WLC, I am able to authenticate in using my AD credentials but when I go to apply any config changes I get a message saying "Authorization Failed. No sufficient privileges." (See error.png) I have a feeling I am missing something small but this is very important to us.
I checked the Radius server and there are no login errors or NPS errors pointing to the WLC logins. Has anyone else run into this issue or know what I can do to solve it?
Thanks,

Hi Kyujin,
I wish I had finished my guide. Didn't realize it would take this long.
But what I meant is that when adding the attributes to my NPS (Microsoft's Network Policy Server) I only had to add the role and virtual domain if using Prime Infrastructure.
If you use NCS, you have to add the role, all the tasks, and the virtual domain.
See the screenshots and see if that helps explain it. Not sure how TACACS will work as I'm not familiar with it.
Microsoft NPS - Attributes for NCS
Microsoft NPS - Attributes for PI

Microsoft Patches for Call Manager

Similar Messages

Maybe you are looking for