Microsoft PPTP / GRE not working with UC320

We just upgraded our phone system to a UC320. We are configured with the default VLAN settings. I have added port forwarding for 47 and 1723 but when I try to cennted with the Microsoft VPN optin with my Windows 7 desktop I receive an error 619. Does anyknow if this is possible with the UC320 adn what I should try to get this working again. It worked with our old router.

Hello. So, does Portforwarding work at all on this unit?
I am trying to do some portforwarding on my UC320. I am using the ip address of 192.168.24.1 as the default gateway for my LAN, which is the UC320. I am using a Cisco SF302-08P Managed POE switch with an IP address of 192.168.24.2. From the UC320 i can ping the SF302-08P and visa versa. However, when i try to port forward in the UC320 to the switch (so i can manage both remotely) it doesn't work.
The Port Forward rule i'm using is as follows:
TCP/UDP Port 8090 forward to 192.168.24.2 port 80.
I have also tried many permutations of this rule using multiple ports on the WAN side (80, 8081) and just using TCP (no UDP). All variations produce the same result - nothing!
Also, i do have http management enabled on the switch. I can manage the switch just fine from my web browser just by entering 192.168.24.2. So that seems to be working as well.
PLEASE HELP!!!!

Similar Messages

Windows 8.1 Standard with Microsoft Account does not work with WSE 2012

I have a WSE 2012 machine with 3 users & 3 devices setup.
My Windows 8 (Standard) Laptop with Local User connects fine.
My Windows 8.1 (Standard) Nettop with Local User connects fine.
But my Windows 8.1 (Standard) Laptop with a Microsoft Account does not automatically login to the Server. It worked fine when it was running Windows 8 with a Local User but unfortunately in 8.1, MS decided to force a Microsoft Account login on us if I want
to continue to use Sky Drive! That would be fine, but now it wont login to their own server product...
I've tried adding a Windows Credential (set at Enterprise level) to the Credentials manager but it just gets forgotten on reboot.
If I log into the LaunchPad (which creates a temporary credential) then it works fine HOWEVER the "remember me" tick box is being ignored and the next time I restart the PC the LaunchPad is signed out again!
I've re-installed the connector.
I've removed the PC from WSE, un-installed the connector and then re-joined. (Done this twice, once as a local user and then converted to MS Account, and once as an MS Account.)
Basically, I just don't think WSE2012 with non-Pro versions of 8.1 on a MS Account have been tested and MS need to either fix it or document it. If someone could just get the LaunchPad to remember my local login and automatically start on next reboot then
it wouldn't be a problem. OR stop launch pad from deleting the manual credentials I added everytime I reboot. At the moment it's the worst of both worlds.
Any ideas?

Hi Susan,
Thanks very much for replying, but if you re-read my post you'll see that I already know how to do that and also that I don't want to change back to a local account because I need Skydrive access.
Essentially as it stands, I can use Windows 8.1 with WSE but lose SkyDrive (and any other MS Account benefits) or I can use an MS Account with Windows 8.1 but lose permanent access to my server shares and client backups...
Reading around it seems that it's perfectly possible to have an MS Account and then do one of the following:
Use a Windows Credential stored for the local user to give access to the Server.
Set the LaunchPad to automatically log in at start-up.
If on a Domain, go into settings and Link the MS Account to your Domain Account.
Unfortunately none of these options are working for me (3 isn't even possible with 8.1 Std).

Microsoft Arc Mouse not working with my Windows Xp home computer

I bought the MS Arc Mouse yesterday and plugged the USB into my home computer and nothing happened. I didn't get a popup saying "new hardware recognized" or anything and the mouse did not work. I tried the mouse in my mom's laptop and it worked instantly... does this mouse work for home computers? Why isn't it responding?

Unplug mouse.
Download driver: http://www.microsoft.com/hardware/download/download.aspx?category=MK (You need to select operating system, etc).
Install driver, and replug in mouse.
If it does not work at that point, establish that you are plugging it into back USB ports rather then front (as sometimes front USB ports are not powered). Also, try rebooting and changing ports.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Microsoft direct push not working with Versamail build 77

Help,
After 2 or 3 emails or just a few minutes I get an error that states "Please sync your EAS account" when set up to receive emails as they arrive. Sync every 5 minutes works but drains battery and does not notify me immediatly of an email. This occurs using the versamail build 77 for Centro just released on Jan. 16, 2008 with exchange 2003 from my company. Other smartphones work just fine when set up "as they arrive".
The error in detail says Microsoft Direct Push enabled Disconnected Error 0006:1212:1480
Please Help!
What do I do?
Post relates to: Centro (Sprint)

Oddly enough, this has been just resolved... Palm/Sprint recently released a firmware upgrade for the Centro, and one of the things that changed is that VersaMail supports Direct Push again... and I think it's working pretty well!
My understanding is that this is only for the Sprint version right now, so hopefully there'll be similar support for the other versions soon.
http://www.palm.com/us/support/downloads/centroupdate/sprint.html
Post relates to: Centro (Sprint)
Post relates to: Centro (Sprint)

Microsoft Office will not work with Lion!

Have just installed Lion, now I can not use microsoft office (Word,XL,PPS), message says "POWERPC applications no longer supported" Any help appreciated.

Sounds like you are using Office 2004 or earlier and if so, as the error message provide indicates, PowerPC applications are no longer supported with Lion, and Office 2004 was witten for Macs with a PowerPC processor. The reason PowerPC applications worked on Macs with Intel processors prior to Lion was due to what is called Rosetta, which is no longer supported with Lion.
I believe Office 2008 or whatever the next version was after 2004 and Office 2011 is supported since these are witten for Macs with an Intel processor with OS X.

Microsoft Office 2011 not working with OSX Mavericks

Hello,
I downloaded OSX Mavericks within the past two or three days, and I've been able to use Microsoft Word just fine. I tried opening PowerPoint today and it crashed, so I updated the Microsoft Office package. Now, I cannot open anything but Messenger.

Went through this exact problem two weeks ago.
Basically, when I installed I then updated and only Word would open correctly. After calling the help desk and going through a ton of suggestions we got it to work by doing update 14.1.0 and then opening Word and updating to 14.1.2. This fixed my problem and it hasn't repeated... and I use the whole office suite daily.
IIRC it was the 14.1.2 update after 14.1.0 that did it, however you can call Microsoft support... just make sure you have about 45 minutes available if you have to do some serious troubleshooting if the two updates don't fix it for you. Keep in mind this worked for me so YMMV.

Microsoft Office 2011 not working with Mountain Lion

I just upgraded to mountain lion last night.... I can not access anything in my microsoft 2011 suite that has been installed on my macbook for about a year. I get a microsoft error reporting pop up and will not open. It stops on "Opening font 16%" on the microsoft startup......?
How do I fix this?

I also came to the conclusion that it must be a font issue, but i've got hundreds of non-standard fonts that i use... time to clean house! Thanks for the tip.

Microsoft Mail not working with Windows 7 & MS-Office 2010

Dear All
I have a client who is using Microsoft Mail for their internal mailing. They have been using MSoffice ( Outlook) for this purpose for last so many years.
We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
When you try to configure it given error 0x8004110.
When we tried with different versions, we found that if you install Office 2007 it works. If you try Office 2007 and then Office 2010 and remove Office 2007, it still work. But Then it is treated as 2 installations of Msoffice on the same computer.
I need to know whether this is right from Licensing perspective. We 'll be using single copy of office but it may seems as we have installed Office 2007 & office 2010 on same computer.
--Shekhar

We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
When you try to configure it given error 0x8004110.
Windows 7 is a supported operation system for Office 2010. At what exactly point will you get the specific error?
Is that a Click-To-Run version of Office 2010? By default, for MSI-based version of Office, when you upgrade existing Office 2007 to Office 2010, the earlier version of Office will be removed:
http://office.microsoft.com/en-us/excel-help/keep-earlier-versions-of-office-programs-when-installing-office-2010-HA102597134.aspx
For licensing advice, as <Don> suggested above, you should contact your local Microsoft customer support or reseller.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Does Lion really not work with Microsoft Office?

does Lion really not work with Microsoft Office?

I am afraid I have reverted to Snow Leopard as I was having one problem after another with Lion and for every problem I was solving, two new ones cropped up. I won't bore you with a long list, but one example is whenever I clicked on a single saved document to view, Microsoft Word would open not only that particular document, but also half a dozen other ones as well. Also, my Canon printer did not operate properly nor would Aol. With a lot of other weird stuff happening every day, the final straw was when my Time Capsule wouldn't backup properly, but just 'hang' indefinitely.
Luckily, I have two HD disks on my iMac and I had installed Lion on HD2 while still retaining Snow Leopard on HD1. I also made a Lion installation disk for future installation when all these software bugs have been sorted.
I am back to normal service with Snow Leopard and shall not return to Lion until at least the next upgrade/patch becomes available. I so looked forward to Lion as well, but I was fighting a losing battle.
I would suggest anyone who is in my position trying to stem the tidalwave of software problems with Lion, make an installation disk for Lion and go back to SL until the next upgrade.

HP Simple Pass not working with Microsoft Edge in Windows 10

I up graded to windows 10 and now I find that HP Simple Pass does not work with Microsoft Edge, despite the fact that it continues to work with the windows 10 sign in.Would appreciate any thoughts on how to fix HP Simple Pass to work with Microsoft Edge. Thank you

I got an answer here:http://h30492.www3.hp.com/t5/Notebook-Betriebssysteme-und-Software/SimplePass-und-Edge/m-p/363610#M34997 Edge doesn't support that kind of plugins at the moment, MS is working on it.

Re: auto save not working with microsoft office on OS Lion

Is there anyone else having issues with the auto-save/versions not working with Microsoft office on the OS Lion Upgrade?

It seems (from some testing I've just done) that:
1. It's not an explicit choie or preference - it's just there, in the background, invisible
2. Your textedit document has to have been saved once (i.e given a name), or you've reopened a previously saved document
If those conditions are met, Textedit will keep the doc saved.
My test was:
Open existing docuement
Make changes
Wait a few seconds
Quit Textedit
Reopen Textedit - and there's the doc with all the changes.
I ran the test again, quitting Textedit immeditaley I had made the change - and it saved the change successfully.
Hope that helps

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

Visual Studio not working with OneDrive

I'm having a problem with Visual Studio 2013. I am working entirely out of my 'OneDrive for Business' directory on my computer. When I work with a project that is located in that directory, I constantly receive the error: "This project has been modified
outside of Visual Studio and needs to be reloaded."
I will be typing away in the code editor, or doing other things inside Visual Studio and that error message pops up. Sometimes every few seconds and there is nothing I can do to stop it from appearing. I am unable to accomplish anything because I constantly
have to stop and click the button to reload the project.
I am the only person using my OneDrive as this is a personal business. No one is accessing my files from another computer. I've also changed my password for OneDrive to ensure I was the only person accessing the files.
I'm trying to figure out why I keep receiving this error message from Visual Studio and how I can get it to stop, so I can get back to working on my projects.
I have all of the Microsoft Office programs, and work with Word 2013, Excel 2013, PowerPoint 2013, and Access 2013 on a daily basis. All of which are located in my 'OneDrive for Business' directory. None of these applications give me an error. It only happens
with Visual Studio 2013.

Hi Kensino,
It seems that I said too early. Currently I got the same issue with you at random times even though I just clicked on Visual Studio Code Editor. This is an issue which needs to be researched. I did not find any ways to resolve this issue,
would you please create a connect report for it to get the issue confirmed and diagnose by Microsoft product team?http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx.
If you submit it, you will get email notification for update. After submitting it, you could share us the link here, so we could know the latest information from the Product team expert.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Generic GRE not working (ver 4.1.3.55)

Hi everybody.
I'm testing in Lab a configuration for one customer.
It's a basic environment with :
DATA CENTER (wccp)
1 WAEs 7341 and 1 Cat6506 routers
BRANCH (inline)
1 WAE 574.
Optimization works with l2-redirect and gre return in DATA CENTER !!
It does not work with egress-method generic-gre inteception-method wccp.
This is the problem that i can see with " show wccp gre" on the 7341..
" Packets received on a disabled service: 667790".
I read some manuals but...
I don't understand .. The service 61 and 62 works !!
So any idea ?
Thanks a lot to everybody
Vittorio

Hy and thanks to be interested.
That's the output you ask :
WAE-DC-01#sh egress-methods
Intercept method : WCCP
TCP Promiscuous 61 :
WCCP negotiated return method : WCCP GRE
Egress Method Egress Method
Destination Configured Used
any Generic GRE Generic GRE
TCP Promiscuous 62 :
WCCP negotiated return method : WCCP GRE
Egress Method Egress Method
Destination Configured Used
any Generic GRE Generic GRE
Intercept method : Generic L2
Egress Method Egress Method
Destination Configured Used
any not configurable IP Forwarding
And here there is another useful :
WAE-DC-01#sh wccp gre
Transparent GRE packets received: 52082
Transparent non-GRE packets received: 0
Transparent non-GRE non-WCCP packets received: 0
Total packets accepted: 0
Invalid packets received: 0
Packets received with invalid service: 0
Packets received on a disabled service: 50118
Packets received too small: 1964
Packets dropped due to zero TTL: 0
Packets dropped due to bad buckets: 0
Packets dropped due to no redirect address: 0
Packets dropped due to loopback redirect: 0
Pass-through pkts dropped on assignment update:0
Connections bypassed due to load: 0
Packets sent back to router: 50118
GRE packets sent to router (not bypass): 0
Packets sent to another WAE: 0
GRE fragments redirected: 28770
GRE encapsulated fragments received: 0
Packets failed encapsulated reassembly: 0
Packets failed GRE encapsulation: 0
Packets dropped due to invalid fwd method: 0
Packets dropped due to insufficient memory: 0
Packets bypassed, no pending connection: 0
Packets due to clean wccp shutdown: 0
Packets bypassed due to bypass-list lookup: 0
Conditionally Accepted connections: 0
Conditionally Bypassed connections: 0
L2 Bypass packets destined for loopback: 0
Packets w/WCCP GRE received too small: 0
Packets dropped due to received on loopback: 0
Packets dropped due to IP access-list deny: 0
Packets fragmented for bypass: 28770
Packets fragmented for egress: 0
Packet pullups needed: 57543
Packets dropped due to no route found: 0
Any new idea ?
Thanks
Vittorio

Modifer keys do not work with mouse in Illustrator

Below is a copy of a bug report I just submitted to Adobe. I don't suppose any users have run across this and found a solution or workaround?
I found someone else with this problem in an archived topic thread, but the only response that poor fellow got was an accusation of not following instructions (His problem wasn't user error, BTW).
Thanks
******BUG******
Concise problem statement:
Modifer keys do not work with mouse: For example, free transform or rotate behaviors that require "Click-Ctrl" .
Steps to reproduce bug:
1. select object
2. select free transform tool
3. left click (without releasing) a corner of the bounding box.
4. start dragging
5. press ctrl
Results:
object behaves as though the ctrl key was not pressed. i.e. the cursor does not change shape and the object scales rather than distorts.
Expected results: The cursor should change shape as the ctrl key is pressed and the object should distort rather than scale.
Additional information: This behavior is intermittent. Occasionally Illustrator recognizes the "Click-Ctrl" combination and behaves exactly as the help file predicts it will. The cursor changes shape and the object distorts rather than scales. I can offer no rhyme or reason for when Illustrator will behave as advertised and when it will ignore the modifier keys.
The example above involves the free transform tool, but the problem occurs just as often with other tool behaviors that require a modifier key + mouse combination.
Primarily using Wacom Intuos3 tablet. (with latest drivers), but have also tried combinations with microsoft mouse or both mice installed.
Also, immediately after an occurrence Illustrator bug, left AI open, went to a different app that uses mouse+modifier (Ctrl+Click). That different app recognizes Ctrl+Click with no problems whatsoever.

Thanks Guys,
Good to know it's working for you. I guess that's the nature of intermittent bugs. Of course, Adobe's bug report form has a field for version, which I, of course, filled in. Sorry I didn't add it to this post. I'm using the latest version CS3 v13.0.2.
Stephen,
Sorry I was not more clear when I said, "For example, ...". I was talking about the modifier keys not working with several different tools. The Free Transform tool advertises functionality that is supposed to work with a "Click (down, but don't release)then hold down Ctrl" combination. The Rotate tool advertises a behavior that is supposed to work with an "Alt-Click" combination. These are just 2 examples of the modifier keys not working. I focused primarily on one example in the bug report(ctrl after and in addition to click in the free transform tool, not alt-click in the rotate tool).
Here is what I expect(quoted from Adobe's CS3 help file)
(From the "Distort Objects with the Free transform tool" help topic)
"Select one or more objects.
Select the Free Transform tool .
Start dragging a corner handle on the bounding box (not a side handle), and then do one of the following:
Hold down Ctrl (Windows) or Command (Mac OS) until the selection is at the desired level of distortion.
Hold down Shift+Alt+Ctrl (Windows) or Shift+Option+Command (Mac OS) to distort in perspective."
(from the "Rotate an object by a specific angle" help topic:)
You can control the exact angle of rotation with the Rotate command.
Select one or more objects.
"Do one of the following:
To rotate around the center point, choose Object > Transform > Rotate, or double-click the Rotate tool.
To rotate around a different reference point, select the Rotate tool. Then Alt‑click (Windows) or Option‑click (Mac OS) where you want the reference point to be in the document window.
Enter the rotation angle in the Angle text box...."
These Tool based mouse-key combinations do occasionally work as they are supposed to, so I know what the expected results are supposed to look like, but whether they work or not appears to depend on the phase of the moon, the day of the week, and the color of the president's underwear.
Other non-tool based mouse-key combinations in Illustrator work consistently all the time - Ctrl-A for Select All as just one example that always works.
Thanks Again

Microsoft PPTP / GRE not working with UC320

Similar Messages

Maybe you are looking for