Microsoft Project conversion from trial to permanent

I have a trial version of 2013 Microsoft project trying to convert or 'reactivate'. How can I? Very frustrated.

I'm not sure I understand. The Trial is time limited so it can't be "reactivated." Have you purchased a license with key and now want to use that key on the trial?
If you have purchased a fully licensed version you may be able to apply that key to the trial through control panel. Find Project in the list of products in control panel > programs. Select it and choose the "Change" option at the
top of the screen. Select Enter a Product key.

Similar Messages

Unable to download Microsoft Project Professional 2013 trial

I've been unable to download the trial version of the MS Project Professional iso file from the TechNet Evaluation Center. I start the download process but it immediately flashes "error" and then reverts back to the previous download
page.
I've tried both Chrome and Explorer browers, and both 32-bit and 64-bit downloads. I've also tried disabling antivirus and firewall. I've searched the web extensibly with no resolution. I've tried to download on both home and work computers to
various directories. I've also found numerous similar problems here on the TechNet forums, but absolutely no helpful response or resolution from Microsoft.
Microsoft online support tells me to call phone support. Phone support tells me they don't support trial versions. Who in their right mind would pay $1200 without being able to first try the product, especially when the company won't
even support their own software services?!
Anyone have any insight on how to fix this download error?
Thanks!

Are you a student?
There is a web site that offers Microsoft Professional 2013 for students at a very good price.
http://www.software4students.co.uk/products/microsoft-project-professional-2013-2014

Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

Latency Between Outputs After Project Conversion From Logic Pro 9

hiya!
i am experiencing a bizarre kind of latency – between outputs. for example, audio assigned to stereo outs 13-14 will leave my system 120 or so ticks after audio assigned to mono outputs 3 or 4. sometimes mono outputs are out of sync with one another too. there's no apparent rhyme or reason, and the latency itself seems to shift – even with plugins turned off and removed from the channel strips. if i have an aux that's outputting to channels 7-8 and do a send to an aux that outs to 13-14, this audio should be perfectly aligned, but it just isn't.
i experience this problem in sessions converted from logic 9 to logic x, though sometimes it seems to happen within sessions started in logic x. i can't for the life of me figure out why it's happening, but do believe there's some sort of error being introduced in the conversion. i can't find anything anywhere on the internet about it.
one temp fix i found was to insert an I/O plugin into the problematic aux, turn it on with an out assigned, then turn it off. sometimes that's worked, and sometimes it hasn't. i've been able to use delay compensation on certain tracks, but it's not an exact science, and sometimes the compensations themselves need to change in order for the tracks to sound aligned. it's beyond aggravating. in some situations, i've had to re-record entire sessions. not tight!
to be clear, this is not about monitoring latency, or having to slide tracks into alignment after recording, or the waveforms on the screen not matching up with what i'm hearing. this is not about plug-in latency. the situation i'm describing happens when plugins are entirely removed: audio that is supposed to be leaving logic at the same exact time via different outputs is somehow not aligned.
my signal chain:
logic pro x.0.7
mac pro quad core (trash can) into -->
apogee symphony 16x16 -->
neve 5059 16x2x2 -->
api 2500 -->
back into the symphony
i've been assured by both apogee and neve and sweetwater that this is not their issue--it's logic pro x. i'm inclined to agree, since it seems to be happening before the audio leaves logic.
please help! many thanks for anything!

godmodeinternet wrote:
thanks for your reply!
to answer some of your answers:
-i have all my channels go through auxes, in all projects, but i did attempt to route audio straight off the channels and encountered the same situation i described above.
-plug-in latency is likely set to ALL at all times, since i often track while in the 'mixing stage'. this is how i've always done everything.
ugh. the worst!
do you think there's anything in environment i might be able to swap around that might have gotten screwed up in the conversion?
thanks again.
I don't think it's an Environment issue, however, quite a few people have reported some corruption when importing Logic 9 projects, it usually takes the form of random Inspector Settings for Delay/Velocity and Preferences/Audio - Recording Delay being set to something other than 0 <zero>. This doesn't sound like your problem. Also sounds like your Plugin Latency setting (ALL) isn't the problem.. although if you're recording while mixing it should be set to Audio & Software instruments.
Have you used your hardware system successfully on an earlier version of OSX and Logic 9? If so then the answer is apparent, especially so if you notice it on projects started in Logic-X (current system) although it my take a certain level of project complexity before it shows up.

Conversion from trial to subscription version

I purchased a subscription to Premire Pro but when I start the program keeps asking me if I want to continue with the trial version.
how do I convert the trial version to the one I purchased?

Hi Marcosibino,
Welcome to Adobe Forums.
When the trial box appears please click on license this software.
Enter your Adobe ID and Password to activate your Product.
Thanks

Can not install MS Project Profession 2013 trial

I was unsuccessful in installing the Microsoft Project Profession 2013 trial. I end up with a .IMG file, not an .ISO file. Using 7-Zp on several attempts led to the attached error in each case. Similar errors occurred trying tools like WinRAR.
That Microsoft may have a download error since 2013 concerning MSP 2013 makes no sense. It's bizarre $1000 software is now this hard to install. MSP 2010 seemed to install easily.

Check this thread:
http://social.technet.microsoft.com/Forums/en-US/e0df945b-578d-4d81-bc11-a6dc8f4b567f/ms-project-2013-trial?forum=officeitpro
"Please try to make a copy of the ISO file, place it anywhere and then mount it.
Here are some similar issues, we could refer to :
http://social.technet.microsoft.com/Forums/windows/en-US/91a5c906-ecca-43cf-a22e-345c44703a62/windows-8-there-was-a-problem-mounting-the-file?forum=w8itprogeneral
http://www.danielclasson.com/issue-with-mounting-new-iso-files-from-technet-in-windows-8-and-windows-8-1-preview/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

Configuration process (after installation) of Microsoft Project Professionnal 2010 fails

On Windows Vista Business 32 (English, SP1), I downloaded en_project_professional_2010_x86_515560.exe from MSDN and installed it. The installation process completed successfully and asked to reboot my computer. After rebooting, I start Microsoft
Project 2010 from the start menu and it starts an initial configuration process which goes into a repeating loop 3 times and fails. Here are the details (when starting Project 2010):
1. Microsoft Project Professionnal 2010 popup: Configuration Progress splash screen with progress bar and yellow wave at bottom.
2. Microsoft Office Project MUI (English) 2010 popup: Please wait while Windows configures Microsoft Office Project MUI (English) 2010, then disappears.
3. Microsoft Project 2010 logo popup with green wave at bottom.
4. Steps 1-3 repeated 3 times.
5. Microsoft Project popup: There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and try again.
I suspect this is a false error message because all my applications are closed and I have over 1GB of free memory.
If I retry:
- Microsoft Project popup: Project failed to start correctly last time. Starting Project in safe mode will help you correct or isolate a startup problem in order to successfully start the program. Sme functionnality may be disabled in this mode.
Do you want to start Project in safe mode?
I click Yes, but the same sequence of popup occurs and it fails with the same error message.
I then installed Microsoft Office Project 2007, as a work-around. But starting Project 2007 gives identical results, except with 2007 popups instead of 2010 popups.
I called Microsoft Technical Support for a case, but they suggested I try posting my question to this forum first.
Thanks for any assistance.

Hi all,
To my experience, this kind of problems is typically caused by a conflict with another software component. That is why a reformat and re-install will most likely fix the problem. In most cases this is caused by the virusscanner or firewall.
For those of you who cannot or do not want to reformat and reinstall everything (which I can understand), find below some steps to troubleshoot the issue and find the conflicting piece of software:
Make sure your computer is up-to-date with all service packs and updates for Windows, Office, Project, Internet Explorer, ...
If this doesn't fix your problem:
Go into add/remove programs, select your office version and do a repair
Into add/remove programs, do a repair of Microsoft Project (or uninstall and reinstall)
If this doesn't fix your problem:
Try to run Microsoft Project with different compatibility settings (e.g. Windows XP SP3). Make sure to reset the compatibility setting after performing your tests!
If this doesn't fix your problem:
Perform a full system scan for viruses and other malware
Remove any malware/virus that has been found
If this doesn't fix your problem:
Disable all 3rd party security products (virusscanner, firewall, anti spyware, ...). If you don't feel comfortable leaving your computer unprotected while being online, simply disconnect your pc from the internet (unplug the cable).
If this doesn't fix your problem:
Uninstall all 3rd party security products (virusscanner, firewall, anti spyware, ...). (Yes, this is different from disabling it as some programs have anti-shutdown protection and still have low-level protection even when disabled).
If this still doesn't fix your problem:
Restart your computer in safe mode and try to open Microsoft Project.
If this still doesn't fix your problem:
See if you have a similar computer available with Project installed that doesn't has this issue. Compare the software installed on both computers and remove the software on the computer having the issue one-by-one to try to find the conflicting software.
And if the problem still exists, please report back onto the forum with detailed information about the problem (version of Windows, Office and Project + Service Pack level), exact error messages you receive and steps you have taken to try to troubleshoot
the issue.
Also keep in mind that these forums are not an official Microsoft support channel, so if none of the above fixed the problem, you might want to open a case with Microsoft Support to have them look into the problem.
I hope this helps,
Hans
My EPM blog: Projectopolis

Microsoft Project Server Online

I need to know Microsoft Project Server Online fees/user and
if we have a discount as we are a gold Microsoft partner or for free, please advise?

Hi,
We can use the Microsoft Project Server 2013 trial version with below link:
http://office.microsoft.com/en-us/project/project-server-2013-project-portfolio-management-software-FX103802061.aspx
As far as I know, Microsoft has different business policy in different states and here is a technical forum. Thus, I recommend we connect the Customer Service Center or local provider.
http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Thanks for your understanding.
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Cannot install Microsoft Project 2013 Trial

Hi everyone,
I'm having a nightmare trying to install the Microsoft Project 2013 trial. I've read various forum posts, but can anyone give me a basic step by step guide to installing the trial!!!! I keep getting an .img file which does not open anything relevant! all
i want is a microsoft project icon to click on...please!!!!!!!!!

Matt --
I think your question is the most repeated question in this public user forum. Most people download the Microsoft Project 2013 trial version and expect to find an EXE file, which is not what you get. Instead, for some reason only known to Microsoft,
you end up with an IMG file.
To install the software, you have the choice of burning it to a disk, or you can use third party software to unzip the contents of the IMG file. I have opted for the second choice, and used the free software from 7-Zip. If you use the 7-Zip software,
you can unzip the contents to a folder, and then run the EXE file you will find in the folder. And no, I do not work for 7-Zip; I have used their software successfully and like it. Hope this helps.
Dale A. Howard [MVP]

Microsoft Project 2013 trial 64-bit download file is corrupt

I downloaded the 64-bit trial version of Microsoft Project 2013, but when I try to burn the .img file to a DVD, I get the message: "The selected disk image file isn't valid."
When I use winrar to expand the file and then run setup.exe, i get the message "Setup cannot continue because a required file is either corrupted or not available."
I've repeated the download several times, each time with the same result.
(The 32-bit version downloaded fine, and I was able to burn it to DVD, but it's not the version I need to install.)
My OS is Windows 7 Professional.
Any ideas?

Hi FKA-PBR,
Sorry you are having issues. I managed to download OK from
http://technet.microsoft.com/en-us/evalcenter/hh973401.aspx and extracted without any issues and could run setup . Worth deleting what you have downloaded before just in case it is trying to over-write something. If it happens again then
getting logs from you might help establish what it thinks is broken.
Best regards,
Brian
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page

Using Webi to generate report from Microsoft Project?

Does anyone know if there a way to create a Webi report from Microsoft Project? Can put me in the right direction towards accomplishing this task?

Hi,
For this use Microsoft .Net with Integration of Business Intelligence(BI/BOBJ). Select web I reports with Crystal Reports generation and use in the .Net Project.
All the Best
Madhu.....

How do I download a free trial of Microsoft Project for Windows XP?

Hello
My PC runs on Windows XP and it doesn't meet the system requirements for the Microsoft Project 2013 trial. Are you guys able to assist and send me a link to 2010 trial?
Many thanks

Nora,
Here is the link for trials of all previous versions of MS Software. Project 2010 is under "Office" category.
http://technet.microsoft.com/en-US/evalcenter/dn407368
Prasanna Adavi,PMP,MCTS,MCITP,MCT http://thinkepm.blogspot.com

Acrobat 8 Standard crashes when opening PDFs created from Microsoft Project 2007

Issue: Acrobat 8 Standard crashes when opening PDFs created from Microsoft Project 2007.
OS: Win XP Pro SP3
Error Message(s): None
Details: This issue happens with multiple Microsoft Project files (including new files), multiple PDF creators (included Acrobat 8 Standard) and on multiple computers. We also tried opening the PDFs in Adobe Reader 8 instead of Acrobat Standard 8. There is no record in the event log on the computers of the application crashes.

I may have a resolution now...
I clicked Tools -> Options -> View and turned off Bars and shapes in Gantt views in 3-D" on the advice of someone on a Microsoft Forum. I made three PDFs from three Microsoft Project files (that were having trouble previously) and was not able to get these PDFs to crash when zooming or changing pages. So far so good!
Regards,
Josh Gold
SERA Architects

Encoding from UTF-8 encoded String to Microsoft Project default encode

Hi Expert ...
I have a problem with encoding a String from UTF-8 String in order to write a MPX (Microsoft Project) file. I used UTF-8 on my Database encoding, and I want to write a MPX file using MPXJ library, but the result is (?) character. I think it's because I didn't encode yet to Shift JIS (a Microsoft Product default encoding). And after that I try to encode the String with Shift_JIS encoding, but the same result is appeared. I try to looking another way, but there is no result.
I hope some expert would help me to solve this problem.
Thank you,
Alfian B.

Totally wrong. A String doesn't have an encoding.
Now if you had an array of bytes, which were encoded using one charset, and you wanted to convert that to an array of bytes encoded using a second charset, you would use code like this:byte[] bytes = // the bytes encoded in UTF-8, let's say
String s = new String(bytes, "UTF-8"); // make that into a String
byte[] newbytes = s.getBytes("windows-31j"); // encode the String into windows-31j

Error clicking on Open "In Microsoft Project for Editing" from PWA ribbon

Receiving errors when selecting any project (from Project Center in PWA on SharePoint 2013) and choosing Open "In Microsoft Project for Editing" from ribbon. Error messages below. We do not receive the error if MS Project Pro 2013 is already
open on PC. What is triggering these errors?
As Project Server Admin using IE9, MS Project Pro 2013 starts to open and then displays "Project Professional 2013 needs to be online in order to open your project. Set Project to connect to Project Web App and try again."
A PM using IE9 completes the same process and receives "Microsoft Project has stopped working correctly. Windows will close the program and notify you if a solution is available." and separate window with "Sorry, we were
unable to open your project. Please try again. If this happens again, please contact your administrator."
As Project Server Admin, I also tried it in Firefox and received the following error message "Project Professional needs to be installed to open the project. Install Project and try again."

Worth checking my blog from yesterday if you are using Firefox -
http://blogs.technet.com/b/projectsupport/archive/2014/12/18/project-online-opening-projects-from-project-center-with-firefox.aspx - this can give this kind of error if you have spaces in the project name. Also make sure in Firefox you have the correct
association for the protocol handler (under Options, Applications) - it needs to have ms-project associated with 'Use Microsoft Office 2013 (default). If this doesn't work then maybe Fiddler will help identify what's going on. Please don't post
Fiddler traces to the forum though as they can capture passwords etc.
Brian.
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page

Microsoft Project conversion from trial to permanent

Similar Messages

Maybe you are looking for