Microsoft Project Send Data Error As of date invalid
Hi,
When i try to receive data from oracle into Microsoft project and then i do same changes and then when i send to back to oracle is shows error."The As of Date is Invalid"
please any tell me how can i correct this error.
thanks,
tariq
Hi,
You may check whether the "As of date" you entered in the progress information if valid and check whether it is within the project period.
Regards,
Bvt
Similar Messages
-
I recently moved my outlook directory to a different drive as my C: drive was getting full.
Everything went smoothly except for now I cannot send emails from any of my addresses with the error "Sending' reported error (0x8004010F): "Outlook data file cannot be accessed.'" that I've associated with outlook. Recently I
uninstalled all of Microsoft Office (student) and reinstalled it on the new drive, still getting the same error. I've tried following the steps at http://support.microsoft.com/kb/2659085/en-us
but when I go into the Control Panel to click on Mail (in this case Mail (32-bit) even though I run a 64-bit OS), the icon in the control panel is a piece of paper (leading me to believe it's broken) and when I click on it, nothing happens. I don't
mean my screen flickers or even thinks about doing anything with the swirly circle cursor... it does absolutely nothing.Hi Stintedvisions,
Generally,
“0x8004010f: Outlook data file cannot be accessed” error is occurred due to wrong configuration of Outlook profile. And as you said that you have been trying all Microsoft methods to resolve, but it’s still not working, then you should use
the inbuilt utility of Microsoft called scanpst.exe. It can identify the bug and repair Outlook in minutes of times.
Thanks
Clark Kent -
Load data error: Database selection with invalid cursor (sm21)
hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu. -
Data error while loading data using SQLLDR
Hi Gurus,
Kindly let em know the possible reasons for getting the below error returned by SQLLDR after loading data:
x no of rows not loaded due to data errors in SQLLDR
Could it be due to issues in control file?you'll find it well explained here :
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/part_ldr.htm#i436326
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_concepts.htm#i1004846 -
When I acess this site I can not download .dat files get a corrupted data error
<i>Moderator Comment<br>
(Duplicate thread closed. Continue at [/questions/1000178]) -m) </i> -
Master data error while loading data
Dear Masters
Im getting below error while loading delta update for master data(Attr) through infopackage to only PSA. Im in BI 7.0
When I checked Error message, Im getting 2 errors. They are
1) Update mode R is not supported by the extraction API
2) Error in source system.
I checked source system is fine. im getting data also in RSA3
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
Could you please help me to resolve this issue.Process chains might fail if the data source is not in sync between the source and the BW system. In such a case, go to the 'Source Systems' in transaction RSA1, find the datasource, right click and select 'Replicate Datasources'. Once this is done, the transfer structure needs to be activated as well. To do this in production, run the report RS_TRANSTRU_ACTIVATE_ALL with the source system name and the infosource name. This will activate the transfer structure.
NOTE: For master data using direct upload the infosource name is the name of the info object itself. -
Tags display date error. 2000 date
I don't understand why it happens to my computer after I upgrade to Yosemite. I cannot find my files with tags until I use the search bar. I like to display my file in time order. Then I found out some of my files are categorized to a strange classification of 2000. How to change these 2000 to right time order? How could this kind of thing happen in Mac OS X Yosemite!!!
-
Error while Loading data through .csv file
Hi,
I am getting below date error when loading data through into Olap tables through .csv file.
Data stored in .csv is 20071113121100.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TE_7007 Transformation Evaluation Error [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')]
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11132 Transformation [Exp_FILE_CHNL_TYPE] had an error evaluating output column [CREATED_ON_DT_OUT]. Error message is [<<Expression Error>> [TO_DATE]: invalid string for converting to Date
... t:TO_DATE(u:'2.00711E+13',u:'YYYYMMDDHH24MISS')].
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11019 There is an error in the port [CREATED_ON_DT_OUT]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> TT_11021 An error occurred moving data from the transformation Exp_FILE_CHNL_TYPE: to the transformation W_CHNL_TYPE_DS.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Mar 29 15:06:17 2010]
TRANSF_1_1_1> CMN_1086 Exp_FILE_CHNL_TYPE: Number of errors exceeded threshold [1].
Any help is greatly appreciated.
Thanks,
Poojak1) Wrong format, you wont get much support loading OLAP cubes in here I think.
2) Has your CSV file been anywhere near excel by chance the conversion of 20071113121100 to 2.00711E+13 looks very much like what I see when Excel has an invalid number mask / precision specified for a cell.
*** We are using EBS. File was already generated by consultants through SQL query. Getting error while loading though Informatica. Target table is setup as date datatype and source is String(19).
Expression in Informatica is setup as below.
IIF(ISNULL(CREATED_ON_DT), NULL, TO_DATE(CREATED_ON_DT, 'YYYYMMDDHH24MISS'))
Thanks,
Poojak -
Date Transformation - "Unparseable date error"
Hi,
I am getting an "Unparseable date error", my source date format (from IDOC) is 27102006, in the target format it should be along with the time stamp like 27102006132010. I tried using the date transformation function and I am getting the following error:
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /SiebelMessage/ListOfAssetManagement/ListOfAssetMgmt-Asset/AssetMgmt-Asset/InstallDate. The message is: Unparseable date: "27102006" .
solicit ur inputs!!!
Thanks & Regards
VijiHi,
Check your java code in Message Mapping, Check out whether you have declared the data typr exactly and again import the java code and activate the objects.
Regards
Agasthuri Doss -
Hi Experts
I have senario here where the Invoice was created in four times and cancelled and the date of creation and t he cancellation was on 16.03.2010 and the fourth one invoice created on 16.03.2010 and cancelled on 18.03.2010 and agin when trying to create with refering the same delivery used in all the cases Error says Date error. Document date 16.03.2010 older than last assigned date 18.03.2010"
Please advise
thanks in advanceHi
Kindly check the belwo:
1.Can you check the number ranges maintained for the J_1AOFFDOC
2.Last assigned date for the relevant combination of company code, subsidiary, document class in the table OFNUM_TW_2 .
Means the date assigned in the above table is different from the PGI date so check the date and assign the same date in vf01
Regards'
Damu -
Microsoft Project export/Import to Visio
What are the steps to import Project file to visio. I stumbled on to it about 4 years ago and forgot the steps. Help!
Hi Ice06,
Here are some references about your questions, help it’s helpful.
Note: To import data from Project, you must have Microsoft Project installed on PC.
Import data from Project into a Visio Gantt chart
http://office.microsoft.com/en-001/visio-help/import-data-from-project-into-a-visio-gantt-chart-HP001207753.aspx
Import data from Project into a Visio timeline
http://office.microsoft.com/en-001/visio-help/import-data-from-project-into-a-visio-timeline-HP001207894.aspx
Import and export timeline data between Visio and Project
http://office.microsoft.com/en-001/visio-help/import-and-export-timeline-data-between-visio-and-project-HA010357458.aspx
If there is anything I can do for you about this issue, don't hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
AD 11g Trusted Recon is failing due to invalid Date format for Start Date
We are using OIM 11g with AD 11g connector.
we have mapped "whenCreated" attribute of AD to "Start Date" in OIM. We ran Trusted Recon, the recon failed due to invalid date format.
we got the following error :
Caused By: oracle.iam.reconciliation.exception.InvalidDataFormatException: Invalid data - 10/19/2012 10:33:30 AM against Date format yyyy/MM/dd HH:mm:ss z for key Start Date
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.convertReconFieldsToOIMFields(ReconOperationsServiceImpl.java:1610)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:548)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:535)
at sun.reflect.GeneratedMethodAccessor9326.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
Thanks.Caused By: oracle.iam.reconciliation.exception.InvalidDataFormatException: Invalid data - *10/19/2012 10:33:30 AM* against Date format yyyy/MM/dd HH:mm:ss z for key Start Date
Error is because of invalid date format.
You need to bring data in required format. As I remember you can configured it in one of the AD configuration lookup. -
Microsoft Project data connection
I am using CR XI and Microsoft Project 2003. I am attempting to connect to a project .mpp file using the Microsoft Project OLE DB 11.0 Provider. If I put the path in the Data Source fill in and the name of the file, including the .mpp extension, in the Database fill in, I get the error message for failure to find the file, error # 80004005. If I type the full path and file name in the Database fill in box, the connection comes in with the name "Connection" and shows the project file tables list, but all of the tables contain the same fields which appear to be the properties for the file, not the project task information. How do I connect to a project file?
Thanks,
JimHi Jim,
Moved to the database forum.
If you can create a UDL file by opening Notepad and save the text file as MyConnection.txt and then rename it to *.udl. Double click on the file and it should open the OLE dB connection wizard. Select all of the option to connect to your mpp file and see if that works.
If not I recall if CR can use them and you'll have to use OLE DB and connect to the DB that way.
Thank you
Don -
Send an error instead on malformed data
I am wondering if I am able to dequeue an incoming message and verify the data, before i insert it into a table, then send an error message back if the data is not valid.
Right now my B2B just sends an acknowledgment back, but doesn't insert the data as it is incorrect.
Should I try validating at the callout level, or the dequeue level?Hi Chris,
Please enable document validation. This can be done at the document definition section of Business action.
Regards,
Dheeraj -
In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .
Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish
Maybe you are looking for
-
Guys, I don't understand how to use it, can someone explain in to me? No entiendo lo de los sistemas operativos y sinceramente creo que no entiendo nada de cómo se hace para partir el disco:( AYUDA! HEEEELP!:(
-
Multiple Breeze presentations in one "Course"
We need to take multiple Breeze presentations grouped together into separate sections of a single online "course" that can perform basic tracking with a our LMS. Our LMS does not support multiple au AICC courses so that kind of leaves us with SCORM.
-
IPhoto copying unedited pictures into modified folder!
Hi everybody! recently I've noticed the size of my iPhoto library growing without me adding any photos, so I checked the folders and discovered that whole events had been copied into the modified folder without me even having edited them! I marked al
-
V_V2 deleting production orders
We are running ERP 600. One segment of the business runs MTO orders (strategy group 20). When the sales order is created, a planned order is also created (as expected.) The planned order is manually converted into a production order (typically th
-
WPA Wireless and static IP?
Hello, I have a WPA (not WPA2) encrypted wifi network at my house. I have both arch boxes connected to it fine. But I want to assign a static IP to one of them. Are the procedures the same as for an ethernet device? I would think not, but I am not su