Microsoft Remote Conenctivity Analyzer got warning and error Message
I got the following error when trying to test using Microsoft Connectivity Analyzer for Lync Server
Analyzing the certificate chains for compatibility problems with versions of Windows.
Potential compatibility problems were identified with some versions of Windows.
Additional Details:
The Microsoft Connectivity Analyzer can
only validate the certificate chain using the Root Certificate Update
functionality from Windows Update. Your certificate may not be trusted
on Windows if the "Update Root Certificates" feature isn't enabled.
Elapsed Time: 7 ms.
Testing remote connectivity for user [email protected] to the Microsoft Lync server.
Specified remote connectivity test(s) to Microsoft Lync server failed. See details below for specific failure reasons.
Additional Details:
Couldn't sign in. Error: Error Message: This operation has timed out..
Error Type: OperationTimeoutException.
Elapsed Time: 100029 ms.
I have installed the certificate correctly:
Certificate Purchased from Comodo PositiveSSL Multi-Domain.
Hi,
Please try to active the Windows feature “Update Root Certificates” and then test again.
If you doesn’t active the feature, the clients and federated partners running the impacted
Windows versions must install the corresponding root certificates manually.
How to get a Root Certificate update for Windows
http://support.microsoft.com/kb/931125
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Similar Messages
-
System Warning and Error Messages in Plant Maintenance
Hi All,
Where can I find the list of system warning and error messages for Plant Maintenance?
Thanks
AndrewHi,
Follow the following path in SPRO. Some of the standard messages you will fond there:
Plant Maint & Customer Serivces - Maintenanace & Service Processing - Maint. & Service Orders - Message Control.
SM -
My Robohelp html 8 project won't open after one warning and error message
I'm currently using Robohelp HTML 8 and when I open my project I first get the following message:
After I click OK, I get this error message:
The project won't open after that. When I look ate my files they seem to be intact even though the message says the folder is missing from
Your help is greatly appreciated.
Thank you,
JoyHi Joy
Unless I'm mistaken, K would be a network drive, no?
Unfortunately RoboHelp is only one of a host of applications that doesn't fare well if you try to make edits to a project while it resides on a network drive.
Try copying the project to your local C drive. Perhaps create a folder named Projects and copy your project to a folder named Primo Intranet inside that folder so it looks like this:
C:\Projects\Primo Intranet
Once you do this, try opening your project again and you will likely have better luck.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
Set up Warning or Error Messages in CO54 and CO60
Hi,
I would like to find out where in SPRO can I maintain warning and error messages for transactions CO54 and CO60?
Thank you in anticipation.
Best regards,
LyncelHi,
Thanks you for your email. However, I do not have specific message class or message number. Messages for CO54 and CO60 are needed for us to find out possible scenarios wherein it will trigger the error "Sending Message failed" in a custom transaction for TECOing process order. This custom trannsaction calls transaction CO%$ in sending messages and transaction COR2 to TECO the process order. If you could provide the transaction in SPRO wherein we could check the messages for CO54, CO60 and please include COR2 also.
Thank you,
Lyncel -
Help Needed With Scripting and Error Messages
I am working to build a script to change orders in SAP using Java. I begun by recording steps and combining them. I am having issues with the Warning and Error Messages. Can someone help me write language to have the script enter through the warnings or errors if they pop up, but move to the next step if nothing pops up?? Some orders have the message, some do not, some have multiples... etc...
Thanks!!Hello Jamie.
Getting popup you can use an Loop like below (this is now for Excel VBA coded):
For Each subWindow In Session.Children
If subWindow.Name = "wnd[1]" Then
On Error Resume Next
Session.FindById("wnd[1]").sendVKey 0
Session.FindById("wnd[1]/usr/btnANSWER_YES").press
Session.FindById("wnd[1]/usr/btnSPOP-OPTION2").press
End If
Next
For Messages in SAP session statusbar like this:
If Session.FindById("wnd[0]/sbar").Text <> "" Then ...
To catch error Messages defined by messagetype you can use this:
If Session.FindById("wnd[0]/sbar").messagetype = "S" Then ... 'sucess messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "I" Then ... 'Information messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "E" Then ... 'Error messagetype
Aso...like we have in SAP
Hope this help a bit to achieve your requirements.
Best regards,
Holger -
Hi all,
I am getting some Warning and Errors about some tables in SCC3 during the execution of Client Copy, Client Export and when consultant check their data then some table or missing which are showing in Warning and Error. one client copy is running for last 2 days.
the spam and SP level are same.
how can i retrieve these tables which are showing under Warning and Errors in SCC3?
Regards,
majamilHi Anil,
sorry for delay,
Dear, there is RFC System Comparision Option available in SCC9 while client comparison option is not .
I got some table are missing after RFC System Comparision. now how can i recover these tables?
and also I am stil getting same Warning and Errors regarding table during Client Copy, Client Export and
Remote client copy.
If I exclude these tables then how can i retrive these one on target system.
Regards,
majamil -
One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
Any suggestions? Thank you in advance!I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation. -
Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file. HELP!
If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
Gene -
Suppressing Warning and Error Dialogs in 8.2
All
I am looking into whether or not it is possible to suppress warning and error dialogs within a form created by LiveCycle Designer 8.2. I am aware this functionality is easily configurable within ES2 - which is the driver behind why I would like to get it working in some form within 8.2. Essentially, I would like no dialog boxes to appear unless explicitly done so via script.
Any ideas?Just thought I would reach out one last time on this topic. To be more specific, I am looking for a means by which to "turn off" dialogs within a Designer 8.2 form. I still wish to use Validation patterns and perhaps Validation scripts but I don't want any dialog boxes to appear should any pattern or script be violated.
Any help would be appreciated.
Thanks in advance! -
My mac keeps locking up it s Power mac G5 Intel using 10.6.8 OS.X. I get no warning or error messages it just locks up and the only way to get it to work again is to depress power button and restart. Its random intermittent and incredibly frustrating. I do get some screen distortion from time to time and wondered whether it may be a graphics card issue or whether it could be solved with a complete system re-install and OS upgrade?
According to everymac.com, your Mac came with Tiger, 10.4.x and can't go any higher than Lion, 10.7.x.
It would have come with gray, machine specific disks. Since there's no reason to install 10.4.x first, and then Snow Leopard over that, just purchase a retail copy of Snow Leopard for $20. What you won't get with the retail version of SL is the iLife suite (Garage Band, iDVD, etc.) that were on the original bundled disks, but you can purchase iLife on Amazon pretty cheap, and get newer versions besides.
When you get Snow Leopard, you can boot to the DVD, erase the drive and install everything clean. Hopefully, you issue is only software, and not hardware related. -
Help. I tried to open my Illustrator CS6 today and got the following error message, "To open Adobe Illustrator CS6 you need to install the legacy Java SE runtime". The window then states, "Click More info...to visit the legacy Java SE 6 download website." I do click on the More Info... button, but the webpage is blank. Please help.
Thanks,
LeoLeo,
Depending on your OS, you should be able to use;
Win:
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Mac:
http://support.apple.com/kb/DL1572
Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case. -
After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.
glennpsychdoc
What computer operating system is your Premiere Elements 12 running on? I suspect Mac because of the name your error.
Please read the following Adobe document with the details and fix for error U44M1P7
ATR Premiere Elements Troubleshooting: PE12: 12.1 Update Released
Specifically open the following link in the above
Update 12.1 installation errors | Photoshop Elements, Premiere Elements
Please let us know if that works for you.
Thank you.
ATR -
Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?
Hi roddy,
thanks for responding. I read your link, looked at my settings and they were all correct. I tried to do a republish and got this message: The requested URL /childrenandcaring/index.html was not found on this server.
When I type the address in the address bar, I go to the site and the page says: This is the new site childrenandcaring.com
Any other ideas?
Suzanne -
Diff between Error,Warning and Abort message
Hi Friends
Can any body tell the Diff between Error,Warning and Abort message
ThanksError - Its the abnormal behaviour which was not expected. Its means the process has been hualted at this point. Unless and untill you resolve this, you can not procedd further.
Warnings: Its just the effect of a process it may have on other processes. You can continue doing irrespective of the warnings.
Abort : to terminate a computer processing or data transfer activity.
Thanks..
Shambhu -
I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?
Audacity > Preferences > Directories. You will probably need to use an external drive as it sounds like you Mac's drive is getting too full???
Maybe you are looking for
-
Does ISO5 support AirPrint and if not why did they do away with it?
Does ISO5 support airprint and if not why did it disappear after ISO4? And will it be added back?
-
Best way to publish Edge files into html page?
Ok, So im looking for the best way to add my edge files into my html page. I want to make it easy to integrate edge with dreamweaver html files, e.g if I change anything in my edge project and publish it I dont need to transfer the html over to my pa
-
Just save a pdf file without nav pan
why can't I save my pdf file with the nav pane showing
-
Change Text with Adobe Writer 5.0.
Hello forum! i have the following problem: a client of us owns adobe writer 5.0 (pc). Nevertheless the client isn't able to "write" pdfs we create wih indesign cs 2 (mac). we use the "web-optimized" configuration. Can anybody help me with this proble
-
Any thoughts on why an iMac would be dropping its wifi connection?
I've got an iMac that seems to be dropping the connection a couple times a day. Also, when I start the computer from a shutdown state, it also doesn't find the wireless network. Wish I could point to a cause. Just started happening in the last week