Microsoft RemoteFX Graphics Device - WDDM - Windows has stopped this device becuse it has reported problems (code 43)
I have a workstation with following configurations:
Display adapter NVIDIA Quadra K4000
OS: Windows Server 2012 Standard (64 bit)
Hyper-V virtual GPU: NVIDIA K4000
Hyper-V VM 1: Windows 8 Enterprise 32 bit
Hyper-V VM 2: Windows 8.1 Enterprise 64 bit
Both the 2 VMs above has the RemoteFX video adapter added and are supposed to have RemoteFX display working.
However it only works in the VM 1 (Windows 8). In the VM 2 (Windows 8.1) the display adapter (Microsoft RemoteFX Graphics Device - WDDM) is reported "Windows has stopped this device because it has reported problems (Code 43)"
Anyone ever experienced a similar issue?
Much appreciated :)
Hi leon,
I am currently standing by for an update from you and would like to know how things are going on your end. Should you have any questions or concerns with the
suggestions I provided, please don't hesitate to let me know.
Regards,
Kelvin hsu
TechNet Community Support
Similar Messages
-
""windows has stopped this device because it has reported problems. (code 43)"" it says this when i connect my iphone4 to my laptop, and the phone is stuck in recovery mode, wat can i do???
Read http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/code-43-wind ows-has-stopped-this-device-because-it/b9cf1b3e-2b71-4b54-adc6-2dda9c73cd5a
-
please help...
my computer is not recognizing my ipod classic gen 5. it shows the sad face then i did the basic troubleshooting until logo comes out...
still my computer is not recognizing my ipod.. it still says "Windows has stopped this device because it has reported problems. (Code 43)"See here: iPod displays a sad iPod icon
Note that it's often a good sign of a hardware issue with the iPod's hard drive meaning the iPod will need to be serviced or replaced.
B-rock -
Device not detected
My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net. Still the problem has not been solvedFolling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
HT1386 Windows has stopped this device because it has reported problems. (Code 43)
Windows has stopped this device because it has reported problems. (Code 43)
When I try to sync to windows 7 machine has been synced before.Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
ipod a1204 emc 2125 Windows has stopped this device because it has reported problems. (Code 43)
ipod a1204 emc 2125 Windows has stopped this device because it has reported problems. (Code 43) what does it mean
-
HT4236 Windows has stopped this device because it has reported problems. (Code 43)
Cpu does not recognize the IPod Nano Gen6 since upgrading to new device and getting this error code...Windows has stopped this device because it has reported problems. (Code 43). I have even uninstalled and reinstalled ITunes...still no joy. Suggestions please??
Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
Windows has stopped this device because it has reported problems. (Code 43)
ipod touch is not recognized by windows 7 64bit system please help
Maybe here:
error code 43 when USB not recognised - Microsoft Answers -
Hi all,
If any one has worked around this error and can help ?
Msg 8522, Level 16, State 3, Line 1
Microsoft Distributed Transaction Coordinator (MS DTC) has stopped this transaction.
I am trying to connect from sql 2012 to 2000 server. Established linked server using native client 10. I am able to see catalogs and database and table. Just when I am trying to query i am getting above error.
any help is really appreciated.
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to TeachHi Logicinisde,
What the new error message do you get after using the workarounds in this
blog? Please post it for analysis.
Besides, as SQL Server 2012 has stopped connecting to SQL Server 2000 via linked servers, personally I recommend you upgrade SQL Server 2000 to a higher version to make your queries or ETLs efficient.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device? A message from windows says: the device has malfunctioned.
Try TS1363: iPod: Appears in Windows but not in iTunes.
See also Corrupt iPod classic.
tt2 -
I have Adobe Acrobat installed as part of the CS6 suite.
It has stopped working (yet again -- it has done that three of four times over the last year).
I have spent days trying to repair it; etc. without any success.
The last time this happened, it was necessary for someone from Adobe to reinstall it entirely, if I remember correctly.
I give up. Can anyone tell me what I must do get the program to actually work?
I spend more time trying to get Adobe Acrobat to work, than I do actually doing my work.
My OS is Windows 8.1. My system has 16 MB of RAM, and hard disks are not overfilled.
I run update virus checker (Kaspersky) daily.
Cheers,
HughHi Hugh ,
Could you please tell what are the challenges you are facing while trying to access Acrobat ?
Do you get any error message ?If yes ,please share the screen shot of the same.
Please try the solution outlined here: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html
OR
Try repairing it from Control panel, or try launching it with a different user account and check if it works or not.
Install the latest updates for Acrobat X from the link : http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
and check.
Let us know how it goes,
Regards
Sukrit Dhingra -
I want to use one apple id in my macbook and iPad but i don't want pics to get sync and show in both devices, how should i stop this ?
Turn off My PhotoStream in iCloud on both the iPad and the Mac. PhotoStream is what shares your photos (unless you are using iCloud Photo Library Beta, in which case, all photos uploaded are accessible from all devices signed onto the same Apple/iCloud ID).
Cheers,
GB -
All of a sudden I'm getting a message Itunes has stopped working Data Execution Prevention has closed Itunes. What is causing this now, never had an issue until yesterday
please sombody help me, apple support are no help, the shop are no help, the only thing i havent tried is delete everything on my laptop and put it back to factory, which is my very last resort
-
My Macbook pro has stopped working and the screen has turned blue on static mode
My Macbook pro 8.1.1 has stopped working and the screen has turned blue on static mode.
I have tried restarts many times but of no Use
Regards
NawabderaTry SMC and PRAM resets:
http://support.apple.com/en-us/HT201295
http://web.archive.org/web/20140711222006/http://support.apple.com/kb/ht1379
Then try a Safe Boot:
http://support.apple.com/en-us/HT201262
Any help?
Ciao. -
When I send a message on my iPhone it also sends it to all of my apple devices, how can I stop this?
When I send a message on my iPhone it also sends it to all of my apple devices, how can I stop this?
In all others devices, Settings>Messages>iMessage>OFF
Maybe you are looking for
-
GOA front end validation in the DISTRIBUTION
Hello All In the header DISTRIBUTION Release Authorized Purchasing Org and LOCATION - SAP has two option one is BUYER to type or select from the existing. I want to stop by TYPING (entering any vlaue) the Purchase organisation and Location and always
-
I have a Mac mini and a G4 iBook, both with the latest OS. I have a Netgear MR814v2 wireless router. I cannot get the thing to work.The browser set-up starts up, and detects that I have a dynamic DCHP, which is correct. However, that is as far as it
-
Setting up Network & Internet via Router on Solaris 10 (x86)
The problem that I have seems to be a very common one. As a regular windows user I have never had any reason to use any other Operating Systems, however, studying oracle on Sun Systems through university has meant that unless I get my own Solaris mac
-
Can you add routes to use ipsec0 interface on SRP521W?
I bought a couple of these to trial for location to remote telemedicine sites. However I am only able to route one network range over the IPSec VPN. I have to route multiple network ranges, and I am not able to make any modifications to the static
-
I am having a problem installing the Adobe flash player needed to watch videos on Youtube. When I first tried to watch one it told me to download the latest version of Adobe flash player. I went to the website and downloaded it without any problems.