Microsoft SCOM 2007 connector

Hi,
i would like to know if there is any way to connect Microsoft system center operations manager with Grid Control. Is there a connector that could help me?
Thank you for your answer.
regards
Andrej

Hi Eduardo,
From http://technet.microsoft.com/en-us/library/jj656656.aspx:
Description: The following connectors are not supported and may not work in System Center 2012 – Operations Manager.
Microsoft System Center Operations Manager 2007 R2 Connector for IBM Tivoli Enterprise Console
If you have any of these connectors installed and open the Interop Connectors node in the Operations console, you may receive an error message.
Workaround: Interoperability between Operations Manager and other products is through System Center Orchestrator 2012.
Natalya

Similar Messages

How to configure SCOM 2007 R2 universal connector to receive alerts from HP NNMi. Please help!

Hi,
I am in situation to configure HP NNMi to forward alerts to SCOM 2007 R2 console. Can someone guide how to achieve this task since I am quite lack of information on this integration.
Thanks.
-Raju

Hi,
I would like to share the following blog with you. It includes detailed information about installation and configuration.
http://blogs.technet.com/b/kevinholman/archive/2010/09/23/installing-the-opsmgr-r2-universal-connector.aspx
Niki Han
TechNet Community Support

SCOM Alert Connector - not updating the start time and finish time

When I am monitoring the status of connectors in service manager console, I found that for SCOM Alert Connector the Start Time and Finish Time are not updating. Previously it was updated daily. As of now, service manager is working fine but would like
to check will it create any issues? Even I have cliked on Synchronize Now, but there is no update. Please guide me on this to trouble shoot further? Thanks.

Hi,
Based on my research, the Start Time and Finish Time values are not updated when an alert connector is synchronized. These values are only updated when alert data is transferred between Operations Manager 2007 and Service
Manager.
More details, please refer to the link below:
http://technet.microsoft.com/en-us/library/hh495609.aspx
In addition, here is a blog about troubleshooting for SCSM and SCOM alert connector:
http://blogs.technet.com/b/servicemanager/archive/2010/04/14/troubleshooting-tips-for-your-scsm-scom-alert-connector.aspx
Regards,
Yan Li
Regards, Yan Li

Share Point 2013 MP for SCOM 2007 R2 - Not Monitored State

Hi All,
I have imported SharePoint 2013 MP in SCOM 2007 R2 and the sharepoint farm group is in "not monitored" state, moreover only one computer name out of all sharepoint farm servers is being populated in unidentified machines (rest are not being
shown anywhere in Microsoft SharePoint folder).
I have followed all the steps as per installation guide of sharepoint 2013 (foundation & Server) MP. Configured run as account has the farm admin rights.
Please help as it seems discovery is not working properly.
Regards,
Prabh.

Hi,
Hope the below blog be helpful:
Configuring the SharePoint 2013 Management Pack
http://blogs.technet.com/b/kevinholman/archive/2013/05/14/configuring-the-sharepoint-2013-management-pack.aspx
Please go through it.
Regards,
Yan Li
Regards, Yan Li

Can overrides from SCOM 2007 R2 be used in a new SCOM 2012 R2 installation?

Hi All,
I'm wondering if we can "easily" use our overrides/configuration from our current SCOM 2007 R2 implementation and use them in a new SCOM
2012 R2 environment that we plan on standing up. We are using SCOM to monitor approx. 400 servers (physical and virtual).
We have been using 2007 R2 for a few years and we'd like to start using 2012 R2. Instead of using the update path (2007 R2 to 2012
to 2012 SP1 to 2012 R2), we are planning on setting up a new 2012 R2 environment and configuring our servers to start reporting to 2012 R2 (after it has been configured in such a way as to "mimic" our 2007 R2 environment).
Ideally, we'd like to avoid going through the upgrade path. (We'll leave our 2007 R2 environment running so that we can still access "historical
data" until the new 2012 R2 environment has had a chance to build up its own "historical data".)
So ... I was thinking we could export our overrides from 2007 R2 and import them into 2012 R2, but I'd like to verify that this approach makes
sense. We haven't done extensive customizations to 2007 R2 in terms of Distributed Applications or Management Pack Objects (although we have made some changes - which I guess we could manually configure in 2012 R2 to offer the same "experience").
The following are some of the Management Packs that we are using in 2007 R2:
Microsoft Windows Active Directory
Active Directory Certificate Services
EMC Storage Monitoring
IBM Hardware
Microsoft Exchange Server 2010
McAfee
Microsoft Forefront Server Protection 2010
Microsoft Office SharePoint Server 2007
Microsoft SQL Server
Microsoft Windows DNS Server
Microsoft Windows WINS
Microsoft Windows Hyper-V
Microsoft Windows Internet Information Services
Microsoft Windows Server
Microsoft Windows DHCP
NetBackup Operations Manager
Office Communications Server
OpsLogix (BlackBerry)
Service Level Dashboard for OpsMgr 2007 R2
SolarWinds Orion
Schedule Maintenance Mode
Team Foundation Server 2010
Virtual Machine Manager
Microsoft Windows Cluster
Operations Manager 2007 R2
I appreciate all feedback and the sharing of you expertise.
Thanks, Joe.

As long as the base pack works and you wish to retain the customisation then you should be ok, there’s a good article
here which explains how to perform the migration and some of implication/things to check.
There will be complications if you’ve stored anything in the default mp but this is explained in the above article.

Reports for Low disk space alerts in scom 2007

Dear Experts,
Is there any possible to get the Low disk Space alerts reports in SCOM 2007 R2.
1, I need reports for Last week SCOM sent alerts on Low Disk space for the servers list
2, Likewise I need SCOM Low disk space alerts reports for last month.
Can somebody please explain me with the steps and I played much with Reporting pane.
Thanks,
Saravana

Hi,
The below code should work to get all servers that have alert of logical disk free space is low in specific period:
get-alert -criteria 'Name = ''Logical Disk Free Space is low'' AND TimeRaised >=''3/24/2014'' AND TimeRaised <= ''4/24/2014''' | select MonitoringObjectDisplayName,MonitoringObjectPath,Name,TimeRaised | sort MonitoringObjectDisplayName
Here is a similar thread for your reference:
how to create a report showing the servers that had the alerts of "Logical Disk Free Space is low" for a specific period?
http://social.technet.microsoft.com/Forums/en-US/50f2c3fb-2dfc-47c6-8c2a-8a2f0149df10/how-to-create-a-report-showing-the-servers-that-had-the-alerts-of-logical-disk-free-space-is-low?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

SCOM 2007 R2 CU 7 SQL Database script update

Hi..I'm in the process of installing CU 7 for SCOM 2007 R2 (SQL 2008 R2). I completed the Server update successfully. While running the SQL operations manager DB upgrade I get the message '(0 row(s) affected'
Auto-attach to process '[144] [SQL] Server' on machine 'Server' succeeded.
The thread 'Server\Instance [87]' (0x8fc) has exited with code 0 (0x0).
The program '[144] [SQL] Server: Server\Instance' has exited with code 0 (0x0).
Also, there are no alerts being generated since yesterday which I assume are due to the database not being updated.
Am I missing something here?
Thanks
blogs.technet.com/b/kevinholman/archive/2012/05/18/opsmgr-2007-r2-cu6-rollup-hotfix-ships-and-my-experience-installing-it.aspx

Hi,
I suggest you follow the official KB methods here.
1. Log on to the computer that hosts the Operations Manager 2007 database by using a user account that has database system administrator (SA) rights to the instance of the Operations Manager 2007 database. To perform the database update remotely, log on
to a computer that hosts SQL Server Management Studio by using a user account that has the appropriate SA rights to the Operations Manager 2007 database.
2. Run SQL Server Management Studio.
3. In the Connect to Server dialog box, connect to the instance of SQL Server that hosts the Operations Manager database. The default database name is OperationsManager.
4. On the toolbar, click New Query.
5. From the SQL Editor toolbar, use the Available databases option to select the Operations Manager database.
6. On the File menu, click Open, browse to C:\program files (x86)\System Center 2007 R2 hotfix utility\KB2783850\SQLUpdate, select the CU_Database.sql file that was extracted by the Windows installer (.msi file), and then click Open.
7. When the file is loaded, click Execute in the SQL Editor toolbar.
8. View the Messages pane to check whether the Transact-SQL commands ran successfully.
9. Exit SQL Server Management Studio.
10. For the Operations Manager data warehouse, repeat steps 1 through 8. However, connect to the instance of SQL Server that hosts the Operations Manager data warehouse, and then run the \SQLUpdate\CU_DataWarehouse.sql file.
More info:
http://support.microsoft.com/kb/2783850
Niki Han
TechNet Community Support

Oracle IdM integration with Microsoft ILM 2007/FIM 2010

We currently have ILM 2007 in our environment with limited usage at the moment. We are looking at purchasing Oracle Identity Manager to implement an enterprise wide IAM solution.
We were wondering if it is possible to continue using ILM like a middleware between our AD forests and the Oracle IdM. Where the Oracle IdM is the overarching IAM solution and Microsoft ILM 2007/FIM 2010 is like the metadirectory for our AD forests.
Is this possible without installing the Oracle Management Connector on any of our DCs and using ILM as the directory that Oracle IdM connects to. All AD account provisioning/de-provisioning, acct updates, password sync/reset will be initiated from the Oracle IdM to ILM and then implemented on AD. In order words no direct interaction with AD domain controllers from Oracle IdM, everything will go to ILM and ILM in turn applies it to AD.
Is this possible?
Is there a custom connector that will work with ILM 2007/FIM 2010
Is this a simple customization or something that can be problematic and expensive?
Any feedback is much appreciated
Thanks

user1106726 wrote:
We currently have ILM 2007 in our environment with limited usage at the moment. We are looking at purchasing Oracle Identity Manager to implement an enterprise wide IAM solution.
We were wondering if it is possible to continue using ILM like a middleware between our AD forests and the Oracle IdM. Where the Oracle IdM is the overarching IAM solution and Microsoft ILM 2007/FIM 2010 is like the metadirectory for our AD forests.
Is this possible without installing the Oracle Management Connector on any of our DCs and using ILM as the directory that Oracle IdM connects to. All AD account provisioning/de-provisioning, acct updates, password sync/reset will be initiated from the Oracle IdM to ILM and then implemented on AD. In order words no direct interaction with AD domain controllers from Oracle IdM, everything will go to ILM and ILM in turn applies it to AD.
Is this possible?yes
>
Is there a custom connector that will work with ILM 2007/FIM 2010Yes, if you write one you will have a custom connector
>
Is this a simple customization or something that can be problematic and expensive?It won't be simple. Problematic and expensive maybe, depends on how good you are with OIM and ILM

Schedule a custom report in scom 2007 R2

Hi Guys,
I have created a custom report using visual studio for scom 2007 r2. I can create adhoc reports using that but when I want to schedule it I dont know how to do that. Since default reports from scom has other optional dates like yesterday, Today, last week,
last 7 days. How to do achieve this. Could some one help me on step by steps how to use date picker for scheduling the reports. I have gone through some microsoft link but I could not understand where exactly I need to add the code on my custom xml report.
Please help me.
Thanks,
Naresh

Hi!
You have to add the correct controls in the parameter block, add the code-block, add report parameters as in the parameter block and replace query parameters.
Have you read this:
http://technet.microsoft.com/en-us/library/gg697751.aspx
Markus Bölske, Lumagate. www.lumagate.se Blog:
www.opsmanager.se|www.scdpm.se

Visio 2010 scom 2007 -link the visio shapes to scom objects in VBA

Hi,
I am adding shapes dynamically to a visio 2010 diagram. I have installed SCOM Add-in for SCOM 2007. Now how can i link the
visio shapes to scom objects programmatically in VBA?
Thanks in Advance,
san7

Hi,
Please refer to the following document:
Using the Visio Add-in for Operations Manager 2007 R2
http://technet.microsoft.com/en-us/library/ee342533.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error importing DA from SCOM through connector

Hi,
After the System Center 2012 R2 upgrade we are seeing event log (operations manager log) errors when the SCOM CI Connector runs.
It states that not everything is synced and it complains about the MP Microsoft.Windows.Peripheral.Networkadapter class, that seems to be included in the SCOM Microsoft.WIndows.Library MP but not in the Microsoft.Windows.Library for SCSM.
Instead it is a separate MP that has not changed version.
I´m investigating if it in fact is not syncing all items, maybe it just warns, but either way this seems strange, and I wonder if anyone else has seen this and if so, what have you done?
ERRORS in operations manager log during SCOM CI Connector sync (there are a lot of these errors for different objets).
log error: 34096
Skipping import of instances of class Microsoft.Windows.Peripheral.NetworkAdapter. The management pack Microsoft.Windows.Library that defines this class has version 7.5.8501.0 in Operations Manager that is higher than its version 7.5.3079.0 in Service Manager.
The following steps will resume import of instances of this class:
1) Import management pack Microsoft.Windows.Library with version 7.5.8501.0 into Service Manager.
2) Edit the connector configuration and ensure that this management pack is selected for synchronization.
And also
log error: 34094
Connector Name=Operations Manager CI Connector, Id=rxc51f96-3434-071c-6b93-34ad39962620
Cannot create part of service map [servicename].
Skipped component: resourcename.domain.net.
Class of skipped component: Health Service.
The component resourcename.domain.net is defined in management pack System Center Core Library. Check for prior errors that indicate if importing a missing management pack can help resolve this issue.
E.O

We are finding something similar when syncing OpsMgr DA's with Service Manager.
Cannot create part of service map [xxxx-xxxxxxx].
Skipped component: Local Area Connection 3.
Class of skipped component: Computer Network Adapter.
The component Local Area Connection 3 is defined in management pack Windows Core Library. Check for prior errors that indicate if importing a missing management pack can help resolve this issue.
Skipping import of instances of class Microsoft.Windows.Peripheral.NetworkAdapter. The management pack Microsoft.Windows.Library that defines this class has version 7.5.8501.0 in Operations Manager that is higher than its version 7.5.3079.0 in Service Manager.
The following steps will resume import of instances of this class:
1) Import management pack Microsoft.Windows.Library with version 7.5.8501.0 into Service Manager.
2) Edit the connector configuration and ensure that this management pack is selected for synchronization.
Well, that's not true, I verified the version is 7.5.8501.0 in the ManagementPacks table.
Service Manager 2012 R2 has the Windows Peripheral Library MP that defines a handful of classes derived from classes in the Windows Library MP.
<ClassType ID="Microsoft.Windows.Peripheral.NetworkAdapter" Accessibility="Public" Abstract="false" Base="Windows!Microsoft.Windows.NetworkAdapter" Hosted="true" Singleton="false" Extension="false">
OpsMgr 2012 R2 does not have this MP, it's not in the Management Packs folder in the bits, and I can't find it in the Service Manager bits. There are no discoveries in it, so this is a fun mystery. Anyone else run into this?

SCSM to SCOM Alert Connector Error

Hello,
Long story short, the SCSM admin created an Alert Connector between SCSM and SCOM, then uninstalled SCSM and started over. That means I had an orphaned SCSM connector in SCOM.
In order to set up a new connection, I followed the instructions found in Kevin Holman's blog post:
http://blogs.technet.com/b/kevinholman/archive/2012/09/28/opsmgr-2012-how-to-delete-an-old-product-connector.aspx
Now, when I try to re-create a new Alert Connector, I get this error:
"Found at least one other alert connector in Operations Manager. Alerts may not be routed as expected if multiple connectors subscribe to the same alert."
I checked the SCOM server to make sure there were no orphaned connectors by running this SQL code against the OperationsManager database:
Aside from the copious number of SCVMM connectors, there were six connectors. Of those six, the previous SCSM connector is marked as "IsDeleted":
Next, I checked the "Microsoft.SystemCenter.Notifications.Internal" management pack to verify that there are no orphaned subscriptions. The ONLY alert referenced is for the "Advisor Data Connector".
At this point, my questions are as follows:
1) Will the System Center Advisor (now renamed Azure Operational Insights) connector cause the warning message I listed above when setting up an Alert Connector in SCSM?
2) Is there another orphaned entry in SCOM that I need to check for and remove before setting up the SCSM alert connector?

Hi,
I would like to suggest you remove the subscription that was orphaned. When remove a connector we should remove the subscriptions first.
And here is a similar thread
SCSM 2012 Cannot create SCOM Alert Connector
https://social.technet.microsoft.com/Forums/en-US/a5d0b921-bb0a-43b8-99ca-8b0112ab3bf0/scsm-2012-cannot-create-scom-alert-connector?forum=connectors
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

What can SCOM 2007 do for me?

I realize this is an abstract question but at this point I don't know what I don't know so bear with me.
Here is my situation; I have just been asked to make SCOM 2007 "work". I have SCOM 2007 installed with SQL 2008 in a Server 2008 R2 domain of approximately 400 users and 300 clients.
I have an upcoming network vulnerability test coming up and I have no prior experience with SCOM. I'm a Server guy just never any experience with SCOM.
I'm ultimately trying to prevent phishing attacks, spoofing, brute force attacks on user accounts and general data exfiltration. Just by reading through some documentation I think at best SCOM is only going to notify me that some of these things are happening
and not actually preventing them and that's ok. After I got it installed and downloaded some management packs I realized the vast amount of information that SCOM is capable of giving me is overwhelming.
I really just need to know what information I need and what do I need to configure to help mitigate some of the things I mentioned above?
Thanks is advance for your advice.

first of all, SCOM strong point is not on system vulnerability monitoring. May be SCOM ACS(Audit Collection service) may be help. Pls. refer to the following post about ACS
How to Deploy Audit Collection Services (ACS)
http://blogs.technet.com/b/fesiro/archive/2013/01/08/how-to-deploy-audit-collection-services-acs-in-scom-2012.aspx
Collecting Security Events Using Audit Collection Services in Operations Manager
http://technet.microsoft.com/en-us/library/hh212908.aspx
Deploying ACS and ACS Reporting
http://technet.microsoft.com/en-us/library/hh298613.aspx
Reporting on security with Microsoft Audit Collection Servces
http://www.techrepublic.com/blog/data-center/reporting-on-security-with-microsoft-audit-collection-services/#.
Roger

Office 365 Management Pack - SCOM 2007

Hi All,
Can anyone please point me to an official link on SCOM 2007 R2 Management Pack for
Office 365. Just wondering if the below link is the right one which I am reffering to
http://www.systemcentercentral.com/scom-monitoring-office-365/
Also, the one which is available for download in "Microsoft Download center" (http://www.microsoft.com/en-ca/download/details.aspx?id=43708)
is designed for SCOM 2012 family, not for SCOM 2007 R2
Appreciate your help...
Faizan

Although this MP is not the official document on monitoring Office 365 using SCOM 2007 R2, it original came from
http://blogs.technet.com/b/momteam/archive/2011/07/29/monitoring-office-365-using-operations-manager.aspx which has a higher reputation and reliable source for Microsoft solution. At last, it is high recommend that you should test it on your testing
environment before roll out to production environment.
Roger

SCOM 2007 Runbook "Missing Extensions"

Yes, I have the OM console installed on the Runbook server.
We are using SCO 2012 R2 with SCOM 2007 R2 CU7.
I have a simple runbook which starts with the Monitor Date/Time activity > finds warnings > the age > and either closes the warning or creates a critical alert depending on some variables. The runbook runs great in the tester. But when we
actually run it, it will start and then abruptly stop. The log will say that it is missing extensions.
Even when i create a 1 activity runbook (Get Alert) it will succeed in the tester and fail with missing extensions when run live.
Very similar to: http://social.technet.microsoft.com/Forums/en-US/2f30bc5a-4387-4ff2-a518-2d80cfaa0686/runbook-error-some-of-the-extensions-are-missing.
Except we have the console installed.
Question 1: What else may cause the SCOM IP to be missing some extensions/binaries?
Question 2: When using SCO 2012 R2 with SCOM 2007 R2, should we have the SCOM 2007 R2 console, or does the IP actually need the SCOM 2012 console?
Question 3: Why arent these extensions/binaries built into the SCOM IP, or at even installed when SCO is installed? I'm no software developer, but it seems incomplete. (This question was mostly rhetorical)
- Get on the floor, do that dinosaur

Hi,
the problem in the thread you referred to was that the Integration Pack was not Installed on the executing Runbook Server: "Runbook 'Name' stopped some of the Extensions are missing"
See
http://www.sc-orchestrator.eu/index.php/scoblog/99-functionality-differences-executing-a-runbook-with-runbook-tester
The knowledge with the SCOM2012 IP and Operator Console is a combination from my experience from field and here:
http://social.technet.microsoft.com/Forums/en-US/8247b6b8-d84b-46f5-a964-2d04568eb5cb/orchestrator-2012-with-ip-for-operations-manager-2007-r2?forum=scoscip
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Microsoft SCOM 2007 connector

Similar Messages

Maybe you are looking for