Microsoft Server 2008 R2 CA with DMVPN
Hi,
I want to Microsoft Server 2008 R2 Certificate Authority Server with DMVPN and that instead to preshared key. Used to certificate server when spokes connect to hub. Can i do it and if that possible then what can i do?
Thank you,
Regards,
Hi,
Good to hear that and thanks for your feedback.
Have a good day!
Best regards,
Susie
Similar Messages
-
Windows Server 2008 black screen with mouse *PLEASE HELP*
Hello fellow techs,
I have been tearing my hair out for the past 12hrs on this issue.
About 3 weeks ago, one of our clients reported that they were experiencing
issues on the network so one of the staff went into the server room and noticed
the screen was black with only the cursor. As they couldn't reboot, they
decided to hold the power button to power it off. When they powered it back
up, it went passed the windows loading
splash screen, and again the screen is black with
the mouse pointer in the center of the screen.
I am diagnosing the server and find that at the black screen, I’m able to move
the cursor and beyond that nothing happened. I started in safe mode with the
exact same results.
I have been trying many different solutions from posts that I have found in
Google but no change.
From other machines you can type \\servername in
the run box and see the shared folders, as well as ping it.
This is a very urgent request as I need to have the Server back up and running
by tomorrow.
I am quiet willing to pay for phone support with anyone that can assist as soon
as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
PLEASE HELP!Hi,
I agree with sm, you should give us more details. Also you should use sfc /scannow
command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
Sfc
http://technet.microsoft.com/en-us/library/ff950779.aspx
Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
The Windows Server black screen may be caused by them.
In addition, there are similar questions, please refer to.
Windows Server 2008 black screen
http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
Windows Server 2008 and the Black Screen of Waiting
http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
Windows Server 2008 black screen with only the mouse pointer showing
http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
Hope this helps.
Best regards,
Justin Gu -
Microsoft ODBC for Oracle / Microsoft Server 2008 r2
We are testing the operational system Windows Server 2008 r2 in one of our clients. This system does not accept the installation of the tool Microsoft ODBC for Oracle. We’d like to know how to install this Driver, once Microsoft’s webpage does not mention any help related to this issue (there is instruction only for the installation of MDAC). We’ve consulted discussion forums and all types of ocurrence on the Internet, but we started to think it’s a Bug of the version. Can you inform us what’s the solution for the problem?
We are looking forward to your answer.user5459571 wrote:
We have new webservers (Microsoft Server 2008 r2 64bit) that will need to connect to a variety of Oracle databases.
Our DBAs have provided:
10204_vista_w2k8_x64_production_client
We have installed it, but, notice that the Microsoft ODBC for Oracle driver is not listed.
It would be better for us to use the Oracle client, but, we do need to connect to Ticket Machines that are based on a Oracle v 8 database. (So, basically, if we use a 10g client trying to connect to a oracle 8 database, it will display the error: ORA-03134 Connections to this server version are no longer supported.)
It is not possible for us to upgrade the Oracle 8 database to current, so, we have to use the Microsoft ODBC for Oracle driver.
So, basically, we have a Oracle 8 database that we can not presently connect. (those machines are feeling abandoned)
Ideas? ThanksIf you insist on using the MS driver, you'll have to get that from MS. Why would you have expected it to come with an Oracle installation?
And to get the Oracle driver, you have to do a 'custom' installation and select the Windows components, as it is not installed with a default installation.
And all that aside from the very serious version compatibility issues. -
We supply our software package that also includes the unattended installation (with /QS and so on) of SQL Server R2 Express (with SP2).
The setup works good in about 99.9% cases, but one customer complained that after the "successful SQL Sever installation (at least, it looked so!) he could not open the supplied database getting some strange error messages...
After some months of trial-n-error attempts we are now able to reproduce the problems this custumer had. But we cannot find the reason of the problem.
So the test computer is a virtual machine with Windows 7 + sp1 32-bit.
Among the programs/tools installed on this machine there were (in the following order):
SQL Server 2008 Express - the default SQLEXPRESS instance
SSMS
VS 2010 Pro (German)
SQL Server 2008 Express R2 (with SP 1 or SP2 - ?) - the default SQLEXPRESS instance
Then some of them were uninstalled in the following order:
SQL Server 2008 Express
SSMS
SQL Server 2008 Express R2
Now we tried to install (in normal mode with UI) the SQL Server 2008 Express R2 with SP2.
When we chose the default SQLEXPRESS instance - it failed with the following info:
Configuration status: Failed: see details below
Configuration error code: 0x7FCCE689
Configuration error description: External component has thrown an exception.
and the Detail.txt file contained the following:
2015-01-20 10:44:09 Slp: External component has thrown an exception.
2015-01-20 10:44:09 Slp: The configuration failure category of current exception is ConfigurationValidationFailure
2015-01-20 10:44:09 Slp: Configuration action failed for feature SQL_Engine_Core_Inst during timing Validation and scenario Validation.
2015-01-20 10:44:09 Slp: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
2015-01-20 10:44:09 Slp: at SSisDefaultInstance(UInt16* , Int32* )
2015-01-20 10:44:09 Slp: at Microsoft.SqlServer.Configuration.SniServer.NLRegSWrapper.NLregSNativeMethod Wrapper.SSIsDefaultInstanceName(String sInstanceName, Boolean& pfIsDefaultInstance)
2015-01-20 10:44:09 Slp: Exception: System.Runtime.InteropServices.SEHException.
2015-01-20 10:44:09 Slp: Source: Microsoft.SqlServer.Configuration.SniServerConfigExt.
2015-01-20 10:44:09 Slp: Message: External component has thrown an exception..
2015-01-20 10:44:09 Slp: Watson Bucket 1 Original Parameter Values
2015-01-20 10:44:09 Slp: Parameter 0 : SQL Server 2008 R2@RTM@
2015-01-20 10:44:09 Slp: Parameter 1 : SSisDefaultInstance
2015-01-20 10:44:09 Slp: Parameter 2 : SSisDefaultInstance
2015-01-20 10:44:09 Slp: Parameter 3 : System.Runtime.InteropServices.SEHException@-2147467259
2015-01-20 10:44:09 Slp: Parameter 4 : System.Runtime.InteropServices.SEHException@-2147467259
2015-01-20 10:44:09 Slp: Parameter 5 : SniServerConfigAction_Install_atValidation
2015-01-20 10:44:09 Slp: Parameter 6 : INSTALL@VALIDATION@SQL_ENGINE_CORE_INST
When we chose some other instance name then the installation has completed successfully.
So the questions are:
What could be the reason of the problem (and only for SQLEXPRESS instance that was earlier installed and then uninstalled)? I will provide the complete Detail.txt file if needed.
How could we check (if we could) the conditions so some name would be allowed as an instance name for SQL Server installer to success?
With the best regards,
Victor
Victor NijegorodovThank you Lydia!
Unfortunately the simple check the registry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL does /did not work in our case since there is no any instance
name there,
However there seem to be some "rudiments" under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and/or HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
So I will now try to check the subkeys of these two keys as it was mentioned by Xiao-Min Tan.
Best regards,
Victor Nijegorodov
Victor Nijegorodov -
Advance features available in sql server 2008 R2 compared with SQL 2008 SP2
Hi,
Can some one brief me the advance features available in sql server 2008 R2 compared with SQL Server 2008 SP2.
I am planning to upgrade my existing sql server 2008 SP2 to sql server 2008 R2, before that i need the advantages to proceed , if the advantages are not suite to my requirements then i will drop out this option.
Please give me the detailed reply for my analysis
hemadriHi Hemadribabu,
There are some new features in SQL Server 2008 Service Pack 2(SP2), including SQL Server utility, Data-tier Application (DAC), Reporting Services in SharePoint Integrated mode and partitioning improvement. Features are supported by the different editions
of SQL Server 2008 R2. For example, the Report Builder 3.0, PowerPivot for excel are available on the SQL Server Datacenter and SQL Server 2008 R2 Parallel Data Warehouse, they can assist you creating business intelligence documents. Here are the Top
new features in SQL Server 2008 R2, including
Report Builder 3.0, SQL Server 2008 R2 Datacenter, SQL Server 2008 R2 Parallel Data Warehouse,
StreamInsight, Master Data Services and so on.
For more information about SQL Server 2008R2 and SQL Server 2008 SP2, you can review the following articles.
http://msdn.microsoft.com/en-us/library/cc645993(v=sql.105).ASPX
https://social.technet.microsoft.com/wiki/contents/articles/1486.microsoft-sql-server-2008-sp2-release-notes.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hi All
After new installation of WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64 bit EE UCM_server1 can’t start. (Please see trace below). WCC 11.1.1.7 run without issues on this environment.
Steps:
1. Installation of jrockit-jdk1.6.0_45-R28.2.7-4.1.0
2. Installation of WLS 10.3.6
3. Installation of WCC 11.1.1.8
4. Schema creation by RCU 11.1.1.8
5. Domain creation by config.cmd with AdminServer, UCM_server1, IBR_server1
6. Run Admin - (success)
7. Run NodeManager (optional) - (success)
8. Run UCM_server1 – failed
Still not works after patching MLR 1 for WCC 11.1.1.8 or upgrade from 11.1.1.7 .
From log files we can saw that problem caused by JniNativeOsUtils.dll file in “<Middleware Home>\Oracle_ECM1\ucm\idc\components\NativeOsUtils\lib\windows-amd64\7.2.1.1”
I replaced JniNativeOsUtils.dll with same file from 11.1.1.7 version and UCM_server1 starts work
I got errors during startup (syNativeOsUtilsNotLoaded and UnsatisfiedLinkError - you can foun them in trace below), but WCC up and works.
I also get error when trying to start SystemProperties or ComponentWithard utility:
Activation context generation failed for "C:\Oracle\MIDDLE~1\USER_P~1\domains\WCC_DO~1\ucm\cs\bin\SystemProperties.exe". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis.
Any ideas?
Thanks
Leon
ERROR:
javax.servlet.ServletException: Could not start up IDC server deployment.
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1268)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.io.IOException: csServletFailedToFullyInitialize
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.common.ServiceException:
at intradoc.server.IdcServerManager.init(IdcServerManager.java:252)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.data.DataException: !Install aborted.
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:554)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.common.ServiceException: !csInitSecurityError
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:140)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,C:/Oracle/MIDDLE~1/USER_P~1/domains/WCC_DO~1/ucm/cs/config/private
at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:570)
at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:76)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:574)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.AssertionError: !syNativeOsUtilsNotLoaded
at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:452)
at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:360)
at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:28)
at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)
at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.UnsatisfiedLinkError: intradoc/common/NativeOsUtilsBase.getNativeVersion()Ljava/lang/String;
at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:448)
at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:360)
at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:28)
at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)
at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)Hi All
Cause of the problems was the missing of "Visual C++ 2005 SP1 Redistributable Package"
Environment works fine after installation of both versions (x86 and x64)
Thanks
Leon -
Multiple logon for Microsoft Server 2008 R2
I currently work for the U.S. Government as a System Administrator. I'm in the middle of an inspection on my system and one of the inspector asked me about multiple logon for Microsoft Server 2008 R2.
How many times are you allowed to logon to Microsoft Server 2008 R2 before it lock the system? And also if I'm the system administrator what is the limit on logging to different systems with my account.
These are questions that I do not have an answer to and I couldn't find any assistance on the Tech Support website.
Thank you for your assistance.
Andre'Hi,
If you mean how many users can log on the same computer, this is limited by the resource:
If You refer system administrator as domain administrator, domain administrators have full administration rights to their domain.
Alex Zhao
TechNet Community Support -
Microsoft server 2008 R2 32 bits setup
Dear sir
Need setup microsoft server 2008 R2 Standard setup on urgent base
Note :-If any query please call us
+918600014818
Thanks & Regards
Prasad JadhavHi Prasad,
Windows server 2008 is available in 32 bit
Windows server 2008 R2 is available in ONLY 64 bit
So if you need a 32 bit operating system you need to go with Windows
server 2008 is available in 32 bit
Download link for Windows
server 2008 is available in 32 bit is below.
http://dreamsupport.us/downloads/windows-pc/-WindowsServer/WS08R2_ENU_STD.iso
Windows server 2008 64 Bit download link is below \:
http://dreamsupport.us/downloads/windows-pc/-WindowsServer/Windows.Server.2008.x64.iso
For Windows server 2008R2 X64 download link is below:
www.microsoft.com/en-in/download/details.aspx?id=11093
www.microsoft.com/en-in/download/details.aspx?id=2227
Windows server 2008 & 2008 R2 instalation video is below
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0CCoQtwIwAg&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DKEx5ZV7mALE&ei=Yr5qVOGtI8OIuwTThoDQDw&usg=AFQjCNFfonruubN10-qUSSyz9jw5yEjF4w&sig2=WSsuG7dXdqonENzOds4d_A&bvm=bv.79908130,d.c2E
Gautam.75801 -
Dear Sir
It is kindly requested to help us with these issue-
we are not able to install the operating system(Microsoft server -2008 SP-2 (x 32 bit)
Following error is coming during installation :-
Windows server could not install due to one or more critical drivers missing. To install Windows make sure that the drivers are valid and restart the installation.
Earlier ,We have observed that our working server has developed a problem of 2 no.s of hard drive failure out of existing 3 no.s. It was in RAID-5 mode. so the server was not booting.
Recently we have changed the faulty hard drives with two new ones and after that configured the RAID and we tried to install the O S but it was showing the above stated error.
Please help us in solving this issue.
Thanks and Regards
J.Anil Kumar
Mobile No : -09630414889
IOCL ChennaiA. Your RAID is configured incorrectly. Erase disks, make diagnostics and create new RAID. Make sure that you have at least 3 disks available for RAID 5 (This is the prerequisite.) Also make sure that you have latest firmware and BIOS installed.
B. It this does not help, ask Dell support/forum for help. This problem is NOT on the Windows installation side.
C. Do not publish your mobile number in this forum. Expect written response here.
HTH
Milos -
SQL Server 2008 R2 Std with SQL Server 2005 Express Subscriptions
If we have SQL Server 2005 Express Merge Replication Subscriptions that synch to a SQL Server 2008 R2 Standard Edition. Do
the Subscriptions still have same file size limitations even though they synch to a Proper Standard Version of SQL Server 2008?
If so what are these limitations?
What happens in the instance where by the server file becomes huge then the Subscriptions will not allow the data to replicate
as the Express Subscription engine has a file size limitation - or does this not matter??You will get messages on your SQL Server Express servers that the merge agent cannot write to the SQL Express database. These messages are difficult to debug as you don't get a warning you have exceeded the size limit on the subscriber.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941 -
How to connect sql server 2008 r2 sp2 with vs2013 ultimate?
how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
Hi Shahzad,
>>how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
Based on your issue, if you wan to connect the sql server 2008 r2 sp2 from VS2013 IDE. I suggest you can try the Ammar and darnold924's suggestion to check your issue.
In addition, I suggest you can also refer the following steps to connect the sql server 2008 r2 sp2 with visual studio 2013 ultimate.
Step1: I suggest you can go to VIEW->SQL Server Object Explorer->Right click SQL Server->Add SQL Server.
Step2: After you connect the SQL Server 2008 r2 sp2 fine, I suggest you can go to VIEW->Server Explorer-> right click the Data Connection->Add Connection.
And then you can create the connect string in the Add Connection dialog box.
Hope it help you!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Installing Flash Player 12 on Windows Server 2008 R2 X64 with IE 8
I have an app that runs on Windows Server 2008 R2 X64 that requires Flash Player 12. When I try to install Flash Player 12 it says that Windows Server R2 X64 is not supported by way of eliminating it from the list of supported operating systems. When I do a search I can find many people who indicate they have it running or explain "hacks" to get it running. Since the app requires it there is an implimcation that it should be running on this OS. What is the offical word on this? This is a production server and I really don't want an "unsupported hack" running in this environment. Is there a supported means of having Flash Player 12 run on Windows Server 2008 R2 X64 with IE8 even if it is within the 32 bit version of the browser?
Server 2008 (x86) is supported, and I had an x64 machine set up last month that had FP12 installed and running in IE and Firefox. 64 bit IE wouldn't run it for some reason, but the 32 bit did. It installed in C/Windows/System32/Macromed/Flash and C/Windows/SysWOW64/Macromed/Flash, but I was unable to get the ActiveX plug-in to enable outside of 32 bit IE.
I also set up a Server 2012 machine that DID support the x64 ActiveX, but that's probably not an option for you.
Like you, I'd be leery of "hacks" to get it to run as an x64 pkug-in, as it may have unintended and undesired consequences in other areas. -
Hi,
I am using Mac Book Pro and want to download some files from my "Microsoft Server 2008 R2" on my Mac Book Pro, as currently I am using "Fast Remote Desktop" but this App doesn't have option files download from Server on Mac Book Pro, so is there any salutation or recommendation some App?
Thankswhy would't you just connect to any of the shared folders on the server instead of using a remote desktop solution?????
go menu --> Connect to Server --> smb://servername/sharename -
WMF 3.0+ supported on server 2008 r2 SP1 with Config Manager 2012 R2
Hi guys
Is WMF (PowerShell) 3.0+ supported on server 2008 r2 SP1 with Config Manager 2012 R2.
Thanks
NNYes supported since SP1 release
Cheers
Paul | sccmentor.wordpress.com -
SQL Server 2008 KB2977321 Failed with Error code 1642
As part of application of security patches via windows update, sql server KB2977321 was applied along with a number of OS security patches.
Prior to applying the patches, I stopped the agent, engine, reporting, analysis and full text services.
The Sql server build prior to windows update was (for both instances):
ProductVersion
ProductLevel
Edition
10.0.5500.0
SP3
Standard Edition (64-bit)
After the update process, my main instance is showing (the second instance is not in use yet and I have left it in its stopped state)
Microsoft SQL Server 2008 (SP3) - 10.0.5520.0 (X64)
Jul 11 2014 16:11:50
Copyright (c) 1988-2008 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (VM)
In the Administrative Logs after the OS patches were applied (and all were reported as successful by windows update), I found the following errors listed:
Log Name:
Application
Source:
MsiInstaller
Date:
11/18/2014 7:16:45 PM
Event ID:
1024
Task Category: None
Level:
Error
Keywords:
Classic
User:
SYSTEM
Computer:
SJCDB3.intranet.co.st-johns.fl.us
Description:
Product: Microsoft SQL Server 2008 Database Engine Services - Update '{9145CF54-462E-4A28-8FB5-A44C93AD3716}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot
issues with installing software packages. Use the following link for instructions on turning on logging support: http://go.microsoft.com/fwlink/?LinkId=23127
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">1024</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-11-19T00:16:45.000000000Z" />
<EventRecordID>1764186</EventRecordID>
<Channel>Application</Channel>
<Computer>SJCDB3.intranet.co.st-johns.fl.us</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data>Microsoft SQL Server 2008 Database Engine Services</Data>
<Data>{9145CF54-462E-4A28-8FB5-A44C93AD3716}</Data>
<Data>1642</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>
</Data>
<Binary>7B38373544383436332D313135422D343444322D414432352D3731454337453833423843437D207B39313435434635342D343632452D344132382D384642352D4134344339334144333731367D2031363432</Binary>
</EventData>
</Event>
In the C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_191448\Detail.txt file I found the following around the time the error was reported
2014-11-18 19:16:30 Slp: Baseline Package Id sql_engine_core_inst_Cpu64 - The highest patch version is 10.3.5500.0
2014-11-18 19:16:30 Slp: Patch Id KB2977321_sql_engine_core_inst_Cpu64 - NotInstalled on the baseline msi package sql_engine_core_inst_Cpu64.
Detail description of this patch package is: PatchId=KB2977321_sql_engine_core_inst_Cpu64 PatchVersion=10.3.5520.0 BaselinePackageId=sql_engine_core_inst_Cpu64 BaselineVersion=10.3.5500.0; PatchFileName=sql_engine_core_inst.msp PatchCode={9145CF54-462E-4A28-8FB5-A44C93AD3716}
2014-11-18 19:16:30 Slp: Patch Id: KB2977321_sql_engine_core_inst_Cpu32 - The baseline msi is not installed.
The patch package is ignored.
2014-11-18 19:16:30 Slp: Patch Id: KB2977321_sql_engine_core_inst_Cpu32 - Detail description of this patch package is: PatchId=KB2977321_sql_engine_core_inst_Cpu32 PatchVersion=10.3.5520.0 BaselinePackageId=sql_engine_core_inst_Cpu32
BaselineVersion=10.3.5500.0; PatchFileName=sql_engine_core_inst.msp PatchCode={9145CF54-462E-4A28-8FB5-A44C93AD3716}
2014-11-18 19:16:30 Slp: Baseline Package Id sql_rs_Cpu64 - The highest patch version is 10.3.5500.0
2014-11-18 19:16:30 Slp: Patch Id KB2977321_sql_rs_Cpu64 - NotInstalled on the baseline msi package sql_rs_Cpu64.
Detail description of this patch package is: PatchId=KB2977321_sql_rs_Cpu64 PatchVersion=10.3.5520.0 BaselinePackageId=sql_rs_Cpu64 BaselineVersion=10.3.5500.0; PatchFileName=sql_rs.msp PatchCode={2296F7DD-2D3D-4802-B61A-AE7460EFB767}
2014-11-18 19:16:30 Slp: Patch Id: KB2977321_sql_rs_Cpu32 - The baseline msi is not installed.
The patch package is ignored.
2014-11-18 19:16:30 Slp: Patch Id: KB2977321_sql_rs_Cpu32 - Detail description of this patch package is: PatchId=KB2977321_sql_rs_Cpu32 PatchVersion=10.3.5520.0 BaselinePackageId=sql_rs_Cpu32 BaselineVersion=10.3.5500.0;
PatchFileName=sql_rs.msp PatchCode={2296F7DD-2D3D-4802-B61A-AE7460EFB767}
2014-11-18 19:16:30 Slp: Baseline Package Id sql_is_Cpu64 - The highest patch version is 10.3.5500.0
2014-11-18 19:16:30 Slp: Patch Id KB2977321_sql_is_Cpu64 - NotInstalled on the baseline msi package sql_is_Cpu64.
Detail description of this patch package is: PatchId=KB2977321_sql_is_Cpu64 PatchVersion=10.3.5520.0 BaselinePackageId=sql_is_Cpu64 BaselineVersion=10.3.5500.0; PatchFileName=sql_is.msp PatchCode={E870296C-24CC-4D82-BB59-CD136692E2BD}
2014-11-18 19:16:30 Slp: Baseline Package Id sql_bids_Cpu64 - The highest patch version is 10.3.5500.0
2014-11-18 19:16:30 Slp: Patch Id KB2977321_sql_bids_Cpu64 - NotInstalled on the baseline msi package sql_bids_Cpu64.
Detail description of this patch package is: PatchId=KB2977321_sql_bids_Cpu64 PatchVersion=10.3.5520.0 BaselinePackageId=sql_bids_Cpu64 BaselineVersion=10.3.5500.0; PatchFileName=sql_bids.msp PatchCode={EA407FA6-C2D1-4D3D-9227-B9E06DDDEFD0}
2014-11-18 19:16:30 Slp: Baseline Package Id sql_ssms_Cpu64 - The highest patch version is 10.3.5500.0
2014-11-18 19:16:30 Slp: Patch Id KB2977321_sql_ssms_Cpu64 - NotInstalled on the baseline msi package sql_ssms_Cpu64.
Detail description of this patch package is: PatchId=KB2977321_sql_ssms_Cpu64 PatchVersion=10.3.5520.0 BaselinePackageId=sql_ssms_Cpu64 BaselineVersion=10.3.5500.0; PatchFileName=sql_ssms.msp PatchCode={8A81B870-E8F0-415D-AC80-13BEAA3EC8C8}
2014-11-18 19:16:30 Slp: Baseline Package Id: sql_common_core_Cpu64 - No patches are found by SQL Discovery on the installed package whose ProductCode is {5340A3B5-3853-4745-BED2-DD9FF5371331}
2014-11-18 19:16:30 Slp: Patch Id KB2977321_sql_common_core_Cpu64 - NotInstalled on the baseline msi package sql_common_core_Cpu64.
Detail description of this patch package is: PatchId=KB2977321_sql_common_core_Cpu64 PatchVersion=10.3.5520.0 BaselinePackageId=sql_common_core_Cpu64 BaselineVersion=10.3.5500.0; PatchFileName=sql_common_core.msp PatchCode={CF023E0F-3A19-4DBF-BCA3-0F664B447EDB}
The instance came up successfully and seems to be operating normally. Was there an error or was the KB installed correctly as the result of the windows update process indicated?
Is there a way I can verify this?I did some research on this particular KB article and it seems to be related to Master Data Services which I am not using. The KB was pushed automatically and I am not sure that it was a required update in our situation. I'd like to understand exactly
what caused the error message before initiating a repair as this is a production and not a test environment. Everything appears to be functioning properly and I have received direction from Microsoft in the past that information in some logs identified
as level 'error' are in fact to be ignored. I checked the windows update and this KB shows 'Successful' rather than failed or cancelled.
I would also like more information on why sql server services should not be stopped prior to allowing the OS patches to be applied. I have received messages in the past that stopping the services before service packs are applied
prevent the necessity for a reboot of the machine. I've never heard before that it is a best practice not to stop Sql service prior to applying patches. Once the services are stopped, I have our infrastructure admin start a VM snapshot on
the machine then kick off the windows update process. When done, I reboot the machine, test out Sql Server processes and then if all goes well give the ok to release the VM snapshot. I've supported various databases for 12 years, Sql Server for 5
years and this is the first time I've heard stopping the service manually can cause problems. If that is the case, I will certainly change how I do things....
I did run the discovery report and the results follow:
Microsoft SQL Server 2008 Setup Discovery Report
Product
Instance
Instance ID
Feature
Language
Edition
Version
Clustered
Sql Server 2008
MSSQLSERVER
MSSQL10.MSSQLSERVER
Database Engine Services
1033
Standard Edition
10.3.5520.0
No
Sql Server 2008
MSSQLSERVER
MSSQL10.MSSQLSERVER
SQL Server Replication
1033
Standard Edition
10.3.5520.0
No
Sql Server 2008
MSSQLSERVER
MSSQL10.MSSQLSERVER
Full-Text Search
1033
Standard Edition
10.3.5500.0
No
Sql Server 2008
MSSQLSERVER
MSAS10.MSSQLSERVER
Analysis Services
1033
Standard Edition
10.3.5500.0
No
Sql Server 2008
MSSQLSERVER
MSRS10.MSSQLSERVER
Reporting Services
1033
Standard Edition
10.3.5520.0
No
Sql Server 2008
EVAULT
MSSQL10.EVAULT
Database Engine Services
1033
Standard Edition
10.3.5520.0
No
Sql Server 2008
Management Tools - Basic
1033
Standard Edition
10.3.5520.0
No
Sql Server 2008
Management Tools - Complete
1033
Standard Edition
10.3.5500.0
No
Sql Server 2008
Client Tools Connectivity
1033
Standard Edition
10.3.5500.0
No
Sql Server 2008
Client Tools Backwards Compatibility
1033
Standard Edition
10.3.5500.0
No
Sql Server 2008
Client Tools SDK
1033
Standard Edition
10.3.5500.0
No
Sql Server 2008
Integration Services
1033
Standard Edition
10.3.5520.0
No
Maybe you are looking for
-
I Think someone has hack into my iTunes account I don't know how this happened or how to stop it I changed my password but still was afraid so I made a new iCloud but I don't know how to use it with iTunes my old one keeps popping up does anyone have
-
Can't send or receive pictures on iphone 5/ sprint, please help!
Was on the phone for over 3 hours last night with Apple and Sprint and I'm beyond frustrated. I just started using my iPhone 5 on the Sprint network a few days ago. I did the 6.0.2 update. I can't send or recieve picture messages! Regular text me
-
Business Graphics API in WEBAS J2EE
Hi, i have a business graphic integrated into my webdynpro application. I checked the api documentation for business graphics and found out, how to change the type of the business graphic and the number of dimensions programmatically. On the API, i c
-
Startup Disk Full Error when it is not full.
When ever my swap files reach the size of the free space on my startup disk (60GB) I receive this error even though my swap files are stored on a separate disk with 500GB free. The startup disk continues to have 60GB free when this error occurs. The
-
Hi Everyone, Facing a problem in cross-company code G/L Accounts posting. When I enter the data in the transaction directly (not recording) with multiple items containing different company codes and save the transaction, The system leads me into anot